Benutzeranleitung / Produktwartung TH 65XVS30 des Produzenten Panasonic
Zur Seite of 72
.
2 W ARNING: 1) T o prevent electric shock, do not remove cover . No user serviceable parts inside. Refer servicing to qualified service personnel. 2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin grounding-type power plug.
3 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer ’s instructions.
4 For assistance, please call : 1-888-VIEW-PTV(843-9788) or send e-mail to : consumerproducts@panasonic.com or visit us at www .panasonic.com (U.S.A.) For assistance, please call : 787-750-4300 or visit us at www .panasonic.com (Puerto Rico) For assistance, please call : 1-800-561-5505 or visit us at www .
5 T able of Contents Important Safety Instructions ....................................... 3 FCC ST A TEMENT ........................................................... 6 Safety Precautions ......................................................... 7 Cleaning and maintenance .
6 FCC ST A TEMENT FCC ST A TEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
7 Safety Precautions W ARNING Set up Do not place the Plasma TV on sloped or unstable surfaces. • The Plasma TV may fall of f or tip over . Do not place any objects on top of the Plasma TV . • If water spills onto the Plasma TV or foreign objects get inside it, a short-circuit may occur which could result in fire or electric shock.
8 CAUTION This Plasma TV is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury . (All of the following accessories are manufactured by Matsushita Electric Industrial Co.
9 Precaution on battery use Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter . Observe the following precautions: 1. Batteries should always be replaced as a pair . Always use new batteries when replacing the old set.
10 CH VOL CH VOL OK TV/VIDEO CBL 1 2 3 4 5 6 7 8 0 9 PIP MIN REW PIP MAX FF PIP MOVE FREEZE TV/VCR SPLIT SWAP SEARCH OPEN/CLOSE SPLIT CH DVD/VCR CH TV MENU PLAY PROG EXIT VCR DVD DBS RCVR LIGHT A -ANT.
11 Connection 1 2.
12 • For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor antenna is recommended. • When you enjoy terrestrial TV programs only , connect the home antenna to ANTENNA (A). • When you enjoy cable TV programs only , connect the cable TV’ s cable to ANTENNA (A).
13 Connection AV Connection CableCARD TM CARD TOP (Turn Card upside down and gently insert it.) AUDIO SERVICE ONLY L R Cable In DEDICATED DISPLA Y OUT ANTENNA AB DIGITAL AUDIO OUT LL P B LP B P R RP R.
14 DIGIT AL AUDIO OUT LP B RP R COMPONENT VIDEO INPUT AUDIO Y LL P B LP B P R RP R 2 AUDIO AUDIO OUT COMPONENT VIDEO INPUT PROG OUT INPUT AUDIO AUDIO L R VIDEO S VIDEO 1 YY RR 2 1 AUDIO OUTPUT DIGIT A.
15 Connection LL P B LP B P R RP R 2 AUDIO AUDIO OUT COMPONENT VIDEO INPUT PROG OUT INPUT DIGIT AL AUDIO OUT AUDIO AUDIO L R VIDEO S VIDEO 1 YY RR 2 1 L AUDIO OUT DIGIT AL AUDIO OUT R AUDIO INPUT OPTI.
16 AUDIO L R SERVICE ONLY CableCARD TM CARD TOP (Turn Card upside down and gently insert it.) AUDIO Cable In DEDICATED DISPLA Y OUT ANTENNA AB DIGITAL AUDIO OUT L R LL P B LP B P R RP R 2 AUDIO AUDIO .
17 Connection PC Connection Notes: • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 1 10 kHz and vertical scanning frequency of 48 to 120 Hz. (However , the image will not be displayed properly if the signals exceed 1,200 lines.
18 Connection CableCARD TM Connection CableCARD TM allows you to tune digital and high definition cable channels through the cable antenna. Consult your cable company on the availability of CableCARD TM .
19 Power ON / OFF POWER POWER DISPLAY OUT Connecting the plug to the W all Outlet Press the Power switch on the Plasma Display to turn the set on: Power-On. Power Indicator: Green Connecting the AC cord plug to the Plasma Display . Fix the AC cord plug to digital media receiver .
20 TV MENU R-TUNE PIP MIN REW PIP MAX FF PLA Y PROG EXIT VCR DVD DBS RCVR CBL LIGHT TV/VIDEO A -A N T E NN A - B SAP 1 2 3 4 5 6 7 8 0 9 AUX A S P E C T M U T E R E C A L L B B E STOP PA U S E FREEZE .
21 SAP • Digital channel Select the audio track (if available). • Analog channel Cycle through different audio modes. e.g. Stereo SAP Mono LIGHT Light the remote control buttons. The selected button blinks when lit. A -ANTENNA - B Switch to (A or B) RF antenna input.
22 Language First T ime Setup For your convenience, First T ime Setup menu will be displayed on screen when the set is turned on for the first time. If needed, follow the menus and procedures displayed on-screen for setting up the features. Y ou can also make the settings in Setup menu (see pages 36-38).
23 W atching TV programs MENU R-TUNE PIP MIN REW PIP MAX FF PLA Y EXIT VCR DVD DBS RCVR LIGHT SAP AUX A S P E C T M U T E R E C A L L B B E STOP P AUSE FREEZE TV/VCR PIP SPLIT MOVE SW AP SEARCH OPEN/C.
24 Menu Navigation 1 Press to display the Main menu. 2 Press to select Other Adjust. Press to display the sub-menu. CH VOL CH VOL OK (T o select Other Adjust sub-menu) MENU CH VOL CH VOL OK Press to select the menu.
25 Press to return. To return to the previous screen Press to return to normal picture. To exit menu MENU EXIT Menu Navigation [Channel / Setup] CH VOL CH VOL OK Press to select the menu. Press to enter the sub- menu field. Proceed to adjustment and setting.
26 CH VOL CH VOL OK Press to select Pic Mode. Press to select the picture mode. • Vivid (default) : Provides enhanced picture contrast and sharpness for viewing in a well-lit room. • Standard : Recommended for normal viewing conditions with subdued room lighting.
27 CH VOL CH VOL OK Press to select Color Matrix. Press to select SD or HD. • SD : When the input signal is a normal TV system (NTSC). • HD : When the input signal is a High-Definition system (A TSC). Notes: • This feature is available only with 480p signal and not available with regular TV (NTSC) program.
28 CH VOL CH VOL OK Press to select AI Sound. Press to select On or Off. Audio CH VOL CH VOL OK Press to select the sub-menu. Press to adjust or activate the sub-menu. 1 CH VOL CH VOL OK Press to select Other Adjust. Press to display the sub-menu. 2 Press to select the sub-menu.
29 Press to select Surround. Press to select On or Off. The benefits of Surround sound are enormous. Y ou can be completely enveloped in sound; just as if you were at a concert hall or cinema. The Surround effect can be obtained without the use of external Ambience speakers.
30 Channel Press to select Surf Mode. Press to select Favorites or All Channels. Press to enter your selection. 1 Press to select Channel. Press to select the channel. Press to add the channel. To delete the channel, press again while the channel number is displayed.
31 To enter preset and manual labels to desired stations. Also to enter input label to video inputs. Menu Navigation Select the channel (refer to your local TV guide). 4 1 Press to select Preset Labels. Press to enter the sub-menu field. Note: Only inputs with a signal will be selectable.
32 1 Press to select Manual Labels. Press to enter the sub-menu field. 3 Press to select Channel. Press to select the available channel number . 4 Press to select Caption. 5 Press to select the character position. Press to select the character (refer to your local TV guide).
33 1 Press to select Input Labels. Press to enter the sub-menu field. 2 Press to select the video input. Press to select the preset input label. •T o delete Input labels, press until no label is displayed, and then press OK button to enter your selection.
34 Press to select Set. Press to select Y es or No. CH VOL CH VOL OK Press to select the hour (AM or PM ) or the minutes position. Press to set the hour (AM or PM) and the minutes. 2 Notes: • The TV automatically turns Off after 90 minutes when turned On by the T imer .
35 To return to the previous screen Press to return. To activate T imer Select the channel and turn off the TV . MENU Menu Navigation Press to select Sleep. Press to select the desired sleep time (No, 30, 60 or 90). •T o turn off the timer , select No.
36 Setup CH VOL CH VOL OK Press to select the menu. Press to display the sub-menu. Press to select the antenna mode. Press to enter your selection. • The confirmation message appears. CH VOL CH VOL OK Input Setup Cable/Antenna Auto Scan Setting Manual Program Signal Meter Language Program Channel 1 2 CH VOL CH VOL OK Press to select Input Setup.
37 1 3 CH VOL CH VOL OK 1 CH VOL CH VOL OK CH VOL CH VOL OK Press to select Auto Scan. Press to enter the sub-menu field. CH VOL CH VOL OK Press to select the sub-menu. Press to start Auto Scan. • After Auto Scan is completed, press MENU to return to the previous screen.
38 CH VOL CH VOL OK 1 Press to select Signal Meter . Press to enter the sub-menu field. Press to select the channel. Press to display the Signal Strength. • The color of the signal bar usually indicates the strength of the received signal. Green - Adequate signal for a good reception.
39 Press to select Analog. Press to enter the sub-menu field. Closed Caption CC Mode CC1 Analog Digital Service 1 CH VOL CH VOL OK CH VOL CH VOL OK 2 Press to select the setting. • CC1 : For video related information that can be displayed (up to 4 line of script on the screen, where it does not disturb the relevant parts of the picture).
40 Menu Navigation Press to select Digital. Press to enter the sub-menu field. CH VOL CH VOL OK CH VOL CH VOL OK Press to select the sub-menu. Press to select the setting.
41 Notes: •T o reduce the occurrence of after-images, set the Side Bar to Bright. • The side bar may flash (alternate black/white) depending on the picture. Using Cinema mode will reduce such flashing (see page 26). 1 Press to select Other Adj. Press to display the sub-menu.
42 Lock Enter a 4-digit password. After entering your password for the first time, “New Password” will change to “Enter Password”. Notes: • Use a code that is easy to remember and record it in a safe place.
43 This television incorporates V -CHIP technology to block the viewing of movies and television programs according to the rating category . There are four (4) Content Advisory Categories: MP AA (Motion Picture Association of America) and TV Parental Guidelines Ratings.
44 U.S. MOVIES RA TINGS CHART U.S. TV PROGRAMS RA TINGS CHART Menu Navigation CANADIAN ENGLISH RA TINGS CHART Description Not Rated. See CUSTOMER CAUTION on page 45. All children. The themes and elements in this program are specifically designed for a very young audience, including children from ages 2-6.
45 V arious Blocking messages are displayed on-screen depending upon the type of blocking you have selected in the Lock menu. Note: Entering the password will override the block condition. However , the ratings selection will be retained. Press to select How Long? Press to select 12 hours, 24 hours, 48 hours or “Always”.
46 Photo V iewer Photo Viewer lets you display JPEG images recorded by digital camera on SD card or other types of memory card when it is inserted in the proper card slot.
47 ROOT DCIM P1000001.jpg P1000002.jpg P1000003.jpg P1000004.jpg P1010001.jpg P1010002.jpg P1010003.jpg P1010004.jpg 100_PANA 101_PANA Created automatically Folder names consist of a 3-digit folder number which is followed by five arbitrary characters.
48 Notes: •Y ou can also enter the thumbnail screen from MENU screen (see page 24). • It may take long time to display the thumbnail if there are lots of files or the file size is large. • The video disappears from the screen while the Photo Viewer access the information from the card.
49 Photo V iewer Setup Menu This menu allows you to customize features in the Photo Viewer Setup Menu. While in the thumbnail mode or the single picture view mode (see page 48) 1 2 Press to select the sub-menu. Press to adjust or activate the sub-menu.
50 Photo V iewer Press to select Rotate. Press to select Left or Right. Press to activate the setting. To access menu see page 49. Allows you to rotate the image (see also page 48). CH VOL CH VOL OK To access menu see page 49. (While in the single picture view mode only) Lets you select the magnification of the single picture display .
51 Symptom Cannot read the content of the card. PC card cannot be ejected. Poor picture quality . Long time to display . The screen turns black. Cause and remedy • Incompatible format. Must be formatted with F A T 12 or F A T 16. • The extension is not “JPG”.
52 : smaller : larger PIP (Picture in Picture) Operation This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the same time with or without an external video source such as a VCR, cable box, etc.
53 PIP (Picture in Picture) Operation The input mode changes in PIP frame. (For analog channels only) 1 2 PIP Frame Press to select the channel. • Y ou can also use the numbered buttons.
54 CH10 CH5 CH5 CH10 SPLIT Operation This feature lets you watch two different channels side by side with or without an external video source. 1 Press to display the SPLIT frame. Notes: • Audio is from Main picture only . • SPLIT frame displays analog channel signal of ANTENNA (A) only , and cannot display ANTENNA (B) or digital channel signal.
55 CH10 TV/VIDEO Notes: • The Main picture and the SPLIT frame are processed by individual circuits, and may have a slight dif ference in image quality . •Y ou cannot display the same picture in the Main picture and the SPLIT frame at the same time.
56 Aspect Controls Lets you choose the aspect depending on the format of the received signal and your preference. Press to change the aspect mode. Displays a 4:3 picture at its standard 4:3 size with gray side bars. (It may create an after-image on screen if displayed for a prolonged period of time.
57 CH VOL CH VOL OK PC MENU 1 Press to display the PC MENU. 2 Press to select the sub-menu. Press to display the sub-menu screen. TV VCR DVD DBS RCVR CBL LIGHT TV/VIDEO A -ANTENNA - B SAP 1 2 3 AUX A S P E C T M U T E R E C A L L B B E CH VOL CH VOL OK MENU EXIT POWER MENU CH VOL CH VOL OK PC MENU PICTURE PICTURE POS.
58 Adjust the horizontal size. Adjust the vertical size. Adjust the horizontal position. Adjust the vertical position. Note: If a “Cue” or “Rew” signal from a VCR or may DVD player is received, the picture position may shift up or down despite of the PICTURE POS.
59 Operating peripheral equipment Programming the remote control code Y ou can operate other manufacturers’ components using this TV’s remote control. Preparation: • Connect the plug of the external component to the wall outlet. • Make sure the component is turned off.
60 Operating peripheral equipment Infrared Code Index Infrared Remote Codes for Specific Components Helpful Hint: Write down the code numbers for your components in the space provided below . This will serve as a handy reference whenever you need to reprogram your remote control.
61 Brand Code Panasonic Replay TV 100 Philips T ivo 101 Sony T ivo 102 Codes for Personal Video Recorders Brand Code Denon 100 Ferguson 101 JVC 109 Mitsubishi 105 Nordmende 101 Panasonic 100 Philips 1.
62 Brand Code Admiral 120 Aiwa 125, 126 Denon 134, 135, 136 Fisher 104 Garrard 1 13 Harman Kardon 1 15, 123 Jensen 129 JVC 132, 133 Kenwood 100, 108 Magnavox 127 Marantz 124 Mclntosh 1 16 Nakamichi 10.
63 Operating peripheral equipment Mode Operational Key Chart This chart defines which keys that are operational after programming (if needed), while in the selected remote control mode, DTV , CABLE, DBS, VCR, DVD .
64 POWER POWER POWER POWER POWER POWER POWER -- - - - - RCVR MUTE TV INPUT SW -- - TV INPUT SW - RCVR INPUT SW -- - - - - -- - TUNER +/ - -- - - - - - -- - - VOLUME +/ - RCVR VOLUME +/ - -- - PVR MENU.
65 T roubleshooting Chart Before calling for service, determine the symptoms and follow suggested solutions. 12, 13 12, 13 12, 13 - 23 21 11 29 23 36 12, 13 19 26,28,29 23 13-18 59-62 59-64 16 26, 27 .
66 T roubleshooting Chart Symptoms Some parts of the screen do not light up. An after-image appears Whirring sounds can be heard from the display unit.
67 Specifications Power Source Power Consumption Maximum Stand-by condition Dimensions (W × H × D) Mass (weight) Channel Capability-A TSC / NTSC FEA TURES Accessories Supplied Operating condition T emperature Humidity Connection terminals RGB input AV INPUT 1- 3 AV PROG.
68 By using this TV you are indicating acceptance of the GNU Public Licenses indicated below . This product utilizes the following so called “open source” software: (1) the software which is licen.
69 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order , agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
70 We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs.
71 libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute.
Customer ’ s Record The model number and serial number of this product can be found on its back cover . Y ou should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for W arranty Service purposes.
Ein wichtiger Punkt beim Kauf des Geräts Panasonic TH 65XVS30 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic TH 65XVS30 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic TH 65XVS30 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic TH 65XVS30 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic TH 65XVS30 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic TH 65XVS30 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic TH 65XVS30 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic TH 65XVS30. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic TH 65XVS30 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
