Benutzeranleitung / Produktwartung SC-PM29 des Produzenten Panasonic
Zur Seite of 28
RQT7372-P . P PC CD Stereo System Operating Instructions Model No. SC-PM29 Table of contents Before use IMPORTANT SAFETY INSTRUCTIONS ...2 Supplied accessories ...............................3 The remote control ...................................4 Placement of speakers.
2 RQT7372 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.
3 RQT7372 System SC-PM29 Main unit SA-PM29 Speakers SB-PM29 The model number and serial number of this product can be found on either the back or the bottom of the unit.
4 RQT7372 The remote control A Battery installation Use of batteries l Align the poles (+ and -) properly when inserting the batteries. l Do not mix old and new batteries or different types of batteries. l Do not recharge ordinary dry cell batteries. l Do not heat or disassemble the batteries.
5 RQT7372 Connections l Plug the AC power supply cord into a household AC outlet only after all other connections have been made. l To prepare the AM loop antenna wire and speaker cords, twist the vinyl cover tip and pull off. 1 Connect the FM indoor antenna.
6 RQT7372 Connections Optional antenna connections You may need an outdoor antenna if you use this system in a mountainous region or inside a reinforced-concrete building, etc. A FM outdoor antenna Disconnect the FM indoor antenna if an FM outdoor antenna is installed.
7 RQT7372 Front panel controls Main unit 1 Cassette lid 2 Cassette open button ( ; OPEN) .............................. 19 3 Standby/on switch ( 8 ) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
8 RQT7372 A CD selection and care With this system, you can only play CDs having this mark. ( A ) Note on CD-R and CD-RW This unit can play CD-R and CD-RW recorded with CD- DA or WMA/MP3. Use an audio recording disc for CD-DA and nalize* it when you nish recording.
9 RQT7372 CDs 1 Press [ ; OPEN/CLOSE] to open the disc tray, and insert the CD. The unit comes on automatically. Press again to close the tray. 2 Press [CD q / h ] to start play. 3 Adjust the volume. Listening to the desired CDs or album 1 Press [CD 1] - [CD 5] to select the desired disc tray.
10 RQT7372 Enjoying MP3/WMA MP3 and WMA Basic operations are the same as for CD-DA. l The folder and le names you enter on the computer become the album and track names on this unit. l There can be a maximum of 400 albums and 999 tracks. l Folders that do not contain MP3/WMA are skipped.
11 RQT7372 Enjoying MP3/WMA Preparation: Press [CD/ q / h ] and then [ g CLEAR]. A HighMAT HighMAT is a new way of recording and managing audio les on CD-R/RW. l The unit plays the tracks in play lists that you create. l You can create these play lists on your computer, sorting them by artist, album, and genre.
12 RQT7372 Other ways of playing CD's By remote control only Preparation: Press [CD/ q / h ] and then [ g CLEAR]. Using the display's list Use the display’s list to nd discs, albums, and tracks to play by nding their titles. l You will need to enter the titles for commercial CDs.
13 RQT7372 Other ways of playing CD's Preparation: Press [CD/ q / h ] and then [ g CLEAR]. A Track search Remote control 1 Press [PLAY LIST]. 2 Press [ e ] or [ r ] to select the title. First select the disc or album title. With HighMAT, press [ e ] or [ r ] to select the method of play ( è refer step 3, on page 11).
14 RQT7372 Other ways of playing CD's By remote control only Preparation: Press [CD/ q / h ] and then [ g CLEAR]. Program play This function allows you to program up to 24 tracks. 1 Press [PROGRAM]. 2 Press [DISC]. 3 Within 10 seconds: Press [1] - [5] to select the disc you want.
15 RQT7372 Other ways of playing CD's By remote control only Preparation: Press [CD/ q / h ] and then [ g CLEAR]. A Random play (CD-DA) Play all the tracks on a single CD or all the tracks on all the CDs randomly. 1 Press [PLAY MODE] to select the desired mode.
16 RQT7372 Other ways of playing CD's By remote control only Preparation: Press [CD/ q / h ] and then [ g CLEAR]. A Marking a track You can mark one track each on the discs loaded so that you can start play from them later.
17 RQT7372 The radio: manual tuning 1 Press [TUNER/BAND] to select "FM" or "AM". The unit comes on automatically. Every time you press the button: FM AM 2 Press [PLAY MODE] on the remote control to select "MANUAL".
18 RQT7372 The radio: preset tuning By remote control only There are two methods of pre-setting stations. Automatic presetting: All the stations the tuner can receive are preset. Manual presetting: You can select the stations to preset and the order they are preset in.
19 RQT7372 Cassette tapes 1 Press [ ; OPEN], insert a cassette with the tape facing out. When the button is pressed, the unit comes on automatically. Make sure the cassette is fully inserted and close the lid by hand. 2 Press [PLAY MODE] on the remote control to select the reverse mode.
20 RQT7372 Making a recording Before recording Types of tapes which can be recorded correctly Use normal position tapes. High position and metal position tapes can be used, but the unit will not be able to record or erase them correctly. Erasure prevention A The illustration shows how to remove the tabs to prevent recording.
21 RQT7372 Making a recording A Recording CDs Preparations: l Insert the CD(s) you want to record. l Press [CD/ q / h ] and then [ g CLEAR]. 1 Press [PLAY MODE] to select your desired mode.
22 RQT7372 Using the sound quality settings By remote control only A Preset EQ and Manual EQ You can choose one of four types of sound quality with Preset EQ or enhances the bass and treble effect of the sound with Manual EQ. 1 Press and hold [SOUND] to select "MANUAL EQ" or "PRESET EQ".
23 RQT7372 A Auto-off function When CD or tape is selected as the source To save power, the unit turns off if it is left unused for 10 minutes. This function does not work if the source is tuner or AUX. Press and hold [SLEEP, -AUTO OFF]. "AUTO OFF" is shown on the display.
24 RQT7372 Using the timers By remote control only Using the play/record timer The timer has two functions. It can be set to on at a certain time to wake you up, or it can be set to record from the radio or from the aux source. The play timer cannot be used in combination with the record timer.
25 RQT7372 Using the timers By remote control only A Using the play/record timer To check settings While the unit is on and the “ z PLAY” or “ z REC” indicator is on, press [CLOCK/TIMER] so the incicator appears on the display. The settings are displayed in the following order: For play timer For record timer 1.
26 RQT7372 Specications g AMPLIFIER SECTION RMS Power output 10% Total harmonic distortion 1 kHz, both channels driven ( Low channel) 35 W per channel (6 Ω ) 8 kHz, both channels driven (High channel) 35 W per channel (6 Ω ) Total Bi-Amp power 70 W per channel Input sensitivity AUX 250 mV Input Impedance AUX 11.
27 RQT7372 Warranty (U.S.A.).
Troubleshooting guide Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the "Customer Services Directory" on page 27 if you reside in the U.
Ein wichtiger Punkt beim Kauf des Geräts Panasonic SC-PM29 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic SC-PM29 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic SC-PM29 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic SC-PM29 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic SC-PM29 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic SC-PM29 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic SC-PM29 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic SC-PM29. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic SC-PM29 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
