Benutzeranleitung / Produktwartung NE-C1153 des Produzenten Panasonic
Zur Seite of 32
NE C1153 4 B B 1 Convection Start Prog Lock Beep Microwave Stop / Reset Cooling Lamp Preheat 4 % 2 1 3 PROGRAM TIME MICRO CONV PREHEAT STAGE 2 6 5 0 9 7 3 8 Operating Instructions R Please read these instructions completely before operating this o v en.
Owner’ s Recor d Model No . Serial No . The serial number of this product can be found on the lo wer right hand side of the ov en. Dealer’ s Name Dealer’ s Address Date of Purchase See page 23 bef ore calling T oll Free Service Information T o locate a conv enient ser vice agent call 1-888-350-9590 Chef Support: 201-348-7305 www .
W ARNING –T o reduce the risk of burns, electric shock, fire, injury to persons, or exposure to e xcessiv e micro w a v e energy: 1. Read all instructions before using the appliance . 2. Read and f ollow “PRECA UTIONS TO A V OID POSSIBLE EXPOSURE T O EXCESSIVE MICRO W A VE ENERGY , ” above on this page .
- 4 - Examine your Oven Unpack o ven, retain all pac king mater ial, and examine the ov en for an y damage such as dents, broken door latches or cracks in the door .
- 5 - Caution Before Use Bef ore using CONVECTION or COMBINA TION function f or the first time, operate this ov en without food on Conv ection 500˚F for 20 min utes, removing all accessories from the oven.This will cause the oil that is used f or r ust protection to be burned off.
- 6 - Shelf Supports Put the shelf suppor ts on left side wall (shelf suppor t marked L) and right side (mar ked R) as f ollows. Locate left-hand suppor t marked “L ” on left-hand back post. Slide f orward to locate front hole ov er front post and ensure that it drops into position.
- 7 - Displa y Window The cursor will illuminate and flash to indicate the function being set. Always chec k the cursor position before y ou press Start Pad.
- 8 - CONTROLS T O USE 8 7 6 5 3 2 9 Convection Start Microwave Stop Cooling Lamp Preheat 4 1 0 Prog Lock Beep Reset / INFORMA TION A CTION DISPLA Y 1 Open Door . Put in F ood. Close Door . The ov en lamp will come on. Oven lamp turns off. 2 Press. Press Microwa ve P ad.
- 9 - Multi-Stage (Sequential) Heating The ov en can be programmed with up to 3 diff erent functions to operate in sequence. These can be MICRO W A VE, CONVECTION or COMBINA TION programs . If a required heating time is greater than 15 minutes on 100-60 % pow er , use 2 stage programming.
- 10 - CONTROLS T O USE 8 7 5 3 2 9 Convection Start Microwave Stop Cooling Lamp Preheat 4 1 0 Prog Lock Beep Reset / 6 INFORMA TION A CTION DISPLA Y 1 Open Door . Put in F ood. Close Door . The ov en lamp will come on. Oven lamp turns off. 2 Press Conv ection P ad.
- 11 - Hot Surfaces Exterior oven surf ace and the ov en door is very hot after heating. T ake great care when remo ving hot food. Use ov en gloves . Multi-Stage (Sequential) Heating The ov en can be programmed with up to 3 diff erent functions to operate in sequence.
- 12 - CONTROLS T O USE 8 7 6 5 3 2 9 Convection Start Microwave Stop Cooling Lamp Preheat 4 1 0 Prog Lock Beep Reset / INFORMA TION A CTION DISPLA Y 1 Open Door . Put in F ood. Close Door . The ov en lamp will come on. Oven lamp turns off. 2 Press Conv ection P ad.
- 13 - Multi-Stage (Sequential) Heating The ov en can be programmed with up to 3 diff erent functions to operate in sequence. These can be MICRO W A VE, CONVECTION or COMBINA TION programs . For 2 stage programming: Repeat steps 1-3 on page 12, enter the ne xt heating program, then press Start Pad.
- 14 - The ov en has 100 blank progr am capacity to meet your heating requirements. CONTROLS T O USE 8 7 6 5 3 2 9 Convection Start Microwave Stop Cooling Lamp Preheat 4 1 0 Prog Lock Beep Reset / INFORMA TION A CTION DISPLA Y 1 Open Door . The ov en lamp will come on.
- 15 - Multi-Stage (Sequential) Cooking It is possible to prog ram into the memor y 2 or 3 stage program using MICR OW A VE, CONVECTION, or COMBINA TION. Changing a Memory Program T o change a program simply f ollow steps 1-6 as bef ore, entering your new prog ram.
- 16 - CONTROLS T O USE 8 7 6 5 3 9 Convection Start Microwave Stop Cooling Lamp Preheat 4 1 0 Prog Lock Beep Reset / 2 INFORMA TION A CTION DISPLA Y 1 Open Door . The ov en lamp will come on. 2 Press Program Lock K e y K eep ke y pressed for 2 seconds until “P” is display ed.
- 17 - INFORMA TION A CTION 1 Open Door . The ov en lamp will come on. 2 Press Program Loc k K ey . K eep ke y pressed for 2 seconds until “P L ” is displa yed. KEEP DOOR OPEN. After 2 seconds, “P” appears in displa y window . After 3 seconds, displa y rev er ts to “o”.
- 18 - Notes on Preheat and Cooling: ! AFTER heating function has completed, ov en will rev er t to PREHEA T function automatically . ! If you w ant to cancel PREHEA T function, keep Stop/Reset P ad pressed for 2 seconds.
- 19 - T o quickly cool the ov en cavity , the oven has a Cooling Pad. The Cooling Pad can be used for defrosting or heating by Micro wav e while in PREHEA T mode. INFORMA TION A CTION 1 Press Cooling P ad. Press Cooling P ad when the display is b lank or “0”.
- 20 - When Program Loc k is activated, y ou can not change the Beep T one. Please release the Program Loc k. (See page 17.) INFORMA TION A CTION 1 Open Door . The ov en lamp will come on. 2 Press Program K e y . K eep ke y pressed for 2 seconds until “P” is display ed.
- 21 - How to read the Cyc le Counter ◆ T o read total cumulative c ycles that the o ven has been used: INFORMA TION A CTION 1 Open Door . K eep Door Open.
- 22 - How to pr ogram f or Scheduled Cleaning Service INFORMA TION A CTION 1 Open Door . The ov en lamp will come on. 2 While pressing Star t Pad, close and open Door .
- 23 - When oven is placed on a counter top, its base must be sealed in accor dance with N.S.F . Standards as per the f ollowing instructions. 1. Oven should be located on a le vel counter top surf ace.
- 24 - T aking Care of Y our Oven It is essential that you f ollow these points to get the maximum use from y our ov en. Microwav es are attracted to moisture and grease: therefore a dirty oven does not cook EFFICIENTL Y . Caution: Do not clean this ov en with any product that is labeled as containing corrosiv e chemicals.
- 25 - T aking Care of Y our Oven 6. Ceiling Bef ore cleaning, ensure oven has cooled to a void burns. Wipe the ceiling regularly with a damp cloth to minimize b uild up of grease and smoke. 7. Contr ol Panel If the Control P anel becomes dir ty , clean with a soft, dr y cloth.
- 26 - T aking Care of Y our Oven 11.Cleaning the Air Screen Clean the Air Screens occasionally according to the f ollowing instructions. Problems ma y occur with the ov en if the filters become clogged with dir t or dust.* 1. Remove the right Air Screen from the front bottom skir t by pulling the Right P op Pin straight out.
- 27 - Ho w does the Micr owa ve w ork? Microwa ves are a f orm of high frequency radio wav es similar to those used by a r adio including AM, FM and CB. They are, ho wev er , much shor ter than radio wa ves; approximately five inches in length. Electr icity is conv er ted into microwa ve energy by the magnetron tube .
- 28 - T ypes of Container s to use MICRO W A VE 1. Glass DO USE: Heat Resistant glass eg. Pyrex DO NO T USE: Delicate glass, lead crystal which ma y crack or arc. 2. China/Ceramics DO USE: Glazed china dishes , porcelain and ceramic dishes designed f or cooking.
- 29 - COOKING B ASICS Fundamental principles deter mine the success of microwa ve f ood preparation. They include: 1. Always cook or heat f oods in cov ered containers. - This will accomplish the f ollowing; a) Retain steam to keep f oods moist. b) Even cooking temper atures.
- 30 - T ec hnical Specifications NE-C1153 208 V / 60 Hz, single phase 3900 W / 18.8 A Microwa ve: 1100 W (IEC 705-88) Conv ection Heater : 2800 W 2450 MHz 23 5 / 8 ”x 20 7 / 16 ”x 1 5 3 / 16 ” .
Memo - 31 -.
www .panasonic.com/cmo P ANASONIC HOME AND COMMERCIAL PRODUCTS COMP ANY , DIVISION OF MA TSUSHIT A ELECTRIC CORPORA TION OF AMERICA One P anasonic W ay 4A-4 Secaucus, NJ07094 Or Call (201) 348-5377 A0.
Ein wichtiger Punkt beim Kauf des Geräts Panasonic NE-C1153 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic NE-C1153 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic NE-C1153 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic NE-C1153 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic NE-C1153 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic NE-C1153 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic NE-C1153 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic NE-C1153. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic NE-C1153 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
