Benutzeranleitung / Produktwartung KX-TCD705BX des Produzenten Panasonic
Zur Seite of 52
Digital Cor dless Phone Model No. KX-TCD705BX Operating Instructions Charge the batteries for appr o x. 10 hours bef ore initial use. Caller ID Compatible PLEASE READ BEFORE USE AND SA VE KX-TCD705BX .
2 Dear purc haser , Y ou have acquired a KX-TCD705BX, which is a product made in regard with the European Standards for Cordless T elephones (DECT). DECT technology is characterized by high-security protection against interceptions as well as high-quality digital transmission.
3 Safety Instructions T ake special care to follow the safety suggestions listed below . Safety 1) The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. 2) When the unit is not used, turn the power off.
Contents 4 Chapter 1 Preparation Chapter 3 Programmable Functions (On the Handset) Chapter 2 Basic Operations Handset Programming ........................37 Setting Alarm .......................................37 Setting Ringer Options ...............
5 Chapter 4 Programmable Functions (On the Base Unit) Base Programming .............................43 Bell Selection .......................................43 Select Base Unit Ringer V olume ........44 Select the Dialling Mode .....................44 Select Earth/Flash Timing .
6 ◆ ◆ Connections Plug in the AC Adaptor and the telephone line cord to the rear of the unit. Then connect the cord as shown. Getting Star ted USE ONL Y WITH Panasonic AC ADAPT OR PQL V1CE. • The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use).
7 ➡ ◆ Installing the Batteries in the Handset ◆ Battery Strength Y ou can check the present battery strength on the display . ◆ Rechar ge When “ Û ” flashes or the unit beeps every 15 seconds, recharge the batteries.
8 ◆ Battery Caution: T o reduce the risk of fire or injury to persons, read and follow these instructions. 1. Use only the batteries specified. 2. Do not use non-rechargeable batteries. 3. Do not mix old and new batteries. 4. Do not dispose of the batteries in a fire, they may explode.
9 W all Mounting This unit can be mounted on a wall. • Install screws using the wall template below . • Connect the line cord, and AC Adaptor . • Arrange the wires as shown, then mount the unit.
Location of Contr ols ◆ ◆ Base Unit ◆ Handset 10 7 1 0 3 2 4 6 8 9 5 Charge Contacts Page Button KX-TCD705BX 12/7/01 2:28 pm Page 10.
◆ Icons Î The in-range icon indicates that the handset is in range of the base unit. It flashes when the handset is out of range. Ï The page/intercom icon is displayed when paging or using the intercom. It flashes when another unit pages the handset.
◆ Making a Call (For further information on making calls, see pages 13-16) 1. ZO or %. 2. Dial a phone number . The dialled number is displayed. (If a number is entered incorrectly , ZP ). After a few seconds, the display will start showing the length of the call.
Making Calls ➡ 13 Note : for basic making calls operation, see page 12. ◆ ◆ T o Dial after Confirming the Entered Number With this feature you are able to confirm the entered number before you start dialling. 1. Enter a phone number (maxim um 24 digits) If number is not entered correctly: T o clear one digit, ZW briefly .
➡ Making Calls ◆ T o Redial the Last Number Dialled There are two ways to redial the last number dialled. 1 . ZO or %. 2. ZX . (The last number dialled is displayed and automatically redialled). • After a few seconds, the length of call is displayed.
➡ ◆ A uto Redial When speakerphone is turned on and redial used, the number is dialled automatically . If the number is busy , the unit goes into auto redial mode. The unit automatically repeats the call (max. 12 times) until the called party answers the call.
➡ Making Calls ◆ Direct Call Y ou can store one number into memory and then call this number by pressing O or % . (See pages 38, 40). ◆ Hot Ke y Dialling Y ou can assign up to 9 numbers from the phonebook as Hot Key Dials. After numbers have been stored (see page 26) you can press buttons A to I and then ZO or % to call the number .
Ans wering Calls For basic answering call operation, see page 12. • The handset and base unit will not ring if both ringer volumes are set to OFF (pages 37, 44). ◆ ◆ A uto T alk If you set the Auto T alk Feature to ON (page 39), you can answer a call by lifting the handset off the base unit without pressing O or % .
Using the Phonebook Y ou can store up to 200 names and phone numbers in the phonebook. All phonebook items are sorted by the first word in alphabetical order .
➡ ◆ ◆ Storing Names and Numbers in the Phonebook Make sure that the unit is in the standby mode. 1. ZY or V . 2. Select ‘ New Phonebook ’. 3. ZY or V . • The display shows the number of remaining phonebook items, then ‘ < Enter Name > ’ .
◆ T o Enter Names Selecting Character s The dialling buttons can be used to enter letters and character symbols. The letters are printed on the dialing buttons. Pressing each button selects a character as shown on page 21. T o change the character mode Y ou can select one of 6 character modes by pressing Á during entering a name.
➡ Alphabet (ABC) 1 2 3 4 5 6 7 8 9 0 #&‘ ( ) * , - . / #&‘ ( ) * , - . / #& ‘ ( ) * , - . / #& ‘ ( ) * , - . / #& ‘ ( ) * , - . / #& ‘ ( ) * , - . / #& ‘ ( ) * , - . / #& ‘ ( ) * , - . / #& ‘ ( )* , -.
➡ Using the Phonebook ◆ Finding Items in the Phonebook Make sure that the unit is in the standby mode. All phonebook items are sorted in the following order: Alphabet Letter/Symbol/Number/T elephone Number (when a name is not stored). 1. ZÁ to enter the phonebook.
➡ ◆ Editing an Item in the Phonebook Make sure that the unit is in the standby mode. 1. ZÁ . 2. ZU or S until desired name is displa yed. • Y ou can also search for the item by initial. 3. ZY or V . 4. Select ‘ Edit ’, then ZY or V . • If you do not need to change the name, go to step 6.
◆ Phonebook Copy Y ou can copy the information in the phonebook between the handsets registered in the same base unit. The phonebook copy must be operated in intercom mode (see page 32). Eg. Handset 1 is copying a specified item in the phonebook to Handset 2 during an intercom call.
➡ Eg. Handset 1 is copying more than one item in the phonebook to Handset 2. Handset 1 (Sender): Follow steps 1-5 on Handset 1 on page 24. 1. ZU or S to select item in Phonebook (All items AFTER the selected one are copied). 2. ZY or V . 3. ZU to select ‘ Copy Forward ’.
◆ Storing Phonebook Items as Hot Ke y Dials The dialling buttons (1-9) function as one-touch dials. Y ou can assign up to 9 phone numbers from the phonebook as Hot Key Dials. Make sure that the unit is in the standby mode. 1. ZÁ . 2. ZU or S to select phonebook number to register as Hot Ke y Dial.
◆ Clearing an Item in the Hot Ke y Dial 1. Press and hold a hot key n umber (1-9) • The stored number is displayed. 2. ZU or S until the desired item is displa yed. 3. ZY or V . 4. Select ‘ Clear ’. 5. ZY or V . 6. ZU to select ‘ YES ’. 7.
This unit is compatible with a Caller ID service offered by your telephone company . If you should subscribe to a Caller ID service, the calling party ’ s information will be shown on the handset display after the first ring.
Using the Caller List ➡ 29 ◆ ◆ Viewing the Caller List Y ou can view the caller list of each handset which has received calls. Caller list information includes the caller ’ s phone number (If name and number have been stored in the phonebook, the caller ’ s name and number will be displayed), the date and time the call was received.
◆ Calling Bac k from the Caller List Using the list you can automatically call back a caller . 1. ZU or S to select Caller ID number . 2. ZO or % . • After a few seconds the length of call is displayed. 3. T o hang up ZP . (The handset will return to the standby mode).
• T o Clear All Entries in the Caller ID List 1. ZU or S to displa y Caller ID List. 2. ZY or V . 3. ZU or S to select ‘ All Clear ’. 4. ZY or V . 5. ZU to select ‘ YES ’. 6. ZY or V . • Display returns to the standby mode. • Note : If ‘ NO ’ is selected, Caller ID is not detected and unit returns to Caller ID List.
P aging/Inter com ◆ ◆ P aging All Handsets fr om the Base Unit 1. ZÏ (On the Base Unit). • All handsets will ring for one minute. 2. T o stop paging, ZÏ a gain or ZO on one of the handsets. ◆ Inter com between Handsets A 2-way intercom is available between handsets.
T ransferring a Call using the Inter com (contin ued) 3. (Handset 2) When the unit rings, ZO , N , K to I , L or $ (-An y Ke y Answer), to ans wer . 4. (Handset 1) T ransferring a call ZP • The transfer is completed OR T o return to the External Call ZN .
For Optional Multi-Unit User s 34 Radio Range ◆ ◆ Operating More than One Handset Y ou can register and operate up to 6 handsets at the base unit. Operating more than one handset allows you to have an internal call while simultaneously conducting an external phone call using another handset.
35 Special Features ➡ ◆ ◆ How to Use the P ause Feature (For Analogue PBX Line/Long Distance Service Users) We recommend you insert “ X ” if a pause is required for dialling with a PBX or to access a long distance service (When X is pressed, ‘ P ’ is displayed on LCD).
◆ T emporar y T one Dialling If your telephone line is set to pulse, you are able to switch the dialling mode to tone during a conversation. This feature is necessary if you want to remotely operate a telephone answering machine, or for the access of other special services, which requires the tone dialling, eg.
37 Ringer Option Ringer Volume Y ou can set time of alarm. See page 40 to set alarm time. Y ou can set the alarm to sound OFF , Once or Daily . 6 levels are available. When set to OFF , the handset will not ring. Y ou can set the ring type for calls from an outside line.
38 ➡ Handset Pr ogramming Y ou can turn the handset key sound ON/OFF (key tone, confirmation tone, error tone). Y ou can turn the Call Waiting tone ON/OFF .
39 ➡ Y ou can programme a 4-digit handset PIN. See page 41 to set the PIN. Y ou can turn the Auto T alk feature ON/OFF . When set to ON, you can answer an incoming call by lifting the handset off the base without pressing a button. T wo Nickel Metal Hydride (Ni-MH) rechargeable batteries are included with this unit.
➡ Handset Pr ogramming 40 ◆ Setting Time Alarm The handset(s) will sound an alarm at a preset time for 30 seconds once or everyday . T o set the time, see below:- S / U Y or V S / U Y .
➡ 41 ◆ Setting the Handset PIN Y ou can program a 4 digit password for the handset. The factory pre-set is 0000. Changing the password may prevent the unauthorised use of your unit by another person.
➡ Handset Pr ogramming 42 ◆ Cancelling a Base Unit If another handset is out of range and/or its power is OFF when ‘ Cancelling a Handset ’ , the previous base unit number will still remain in the cancelled handset. Therefore, you need to cancel the base unit registered in the cancelled handset.
43 Base Pr ogramming ➡ Y ou can program the base unit according to your needs. While programming: • When programming is completed, a confirmation tone sounds and display returns to the function menu. • Y ou can exit the programming mode any time by pressing P .
Y ou can program a 4-digit password for the base unit. The factory preset is 0000. Changing the password may prevent the unauthorised use of your unit by another person.
➡ 45 The earth relay can be installed as an option depending on your PBX requirements. Please consult your nearest Panasonic Service Centre for installation.
➡ Base Pr ogramming 46 ◆ Cancelling a Handset Each handset can cancel itself or another handset. Follow steps 1 to 3 on page 43 Y or V Enter Base PIN (4-digits) All registered handsets are displayed. G A - F Select handset(s) to cancel.
Plugging an optional headset into the handset allows a hands-free phone conversation. Please use only the Panasonic KX-TCA89EX headset. Connecting the headset to the handset Open the headset jack cover , and connect the headset to the headset jack as shown.
T abs Slot Slot 3 3 2 1 1 2 2 Option Co ver s Y ou can change the look of your phone ’ s handset with option covers (KX-A109EX). 1. Remove the battery cover by sliding while pressing the arrow . Remove the batteries. 2. The option cover is locked with the right and left tabs.
Bef ore Requesting Help ➡ Prob lem Cause and Remedy “ Î ” flashes and an alarm tone • Y ou are too far from the base unit. Move closer and sounds when you ZO or % . • try again. • Plug in the AC adaptor . • The handset has been cancelled or has not been registered.
50 ➡ Prob lem Cause and Remedy Y ou cannot redial • Access numbers entered after pressing $ will no be included whn redialling. • If the last number dialled was more than 24 digits long, the number will not be redialled correctly .
To T elephone Socke t T -Adaptor T elephone Line Cord Standard T elephone Prob lem Cause and Remedy Y ou cannot register the handset • The base unit has registered a maximum of 6 in the base unit. • handsets or the handset has registered a maximum of 4 base units.
K yushu Matsushita Electric (U .K.) Ltd. Pencarn W ay , Duffryn, Newport, South W ales, NP10 8YE, United Kingdom Printed in Thailand QUQX00004ZA KU0701NMH0 KX-TCD705BX 12/7/01 2:28 pm Page 52 MODEL No.
Ein wichtiger Punkt beim Kauf des Geräts Panasonic KX-TCD705BX (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic KX-TCD705BX noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic KX-TCD705BX - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic KX-TCD705BX reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic KX-TCD705BX erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic KX-TCD705BX besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic KX-TCD705BX verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic KX-TCD705BX. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic KX-TCD705BX gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
