Benutzeranleitung / Produktwartung KX-TC1484F des Produzenten Panasonic
Zur Seite of 44
900MHz Cordless Phone Operating Instructions Model No. KX-TC1484F KX-TC1484R Pulse-or-tone dialing capability PLEASE READ BEFORE USE AND SAVE. Panasonic World Wide Web address: http://www.panasonic.com for customers in the USA or Puerto Rico Charge the battery for about 15 hours before initial use.
2 Accessories (included) For extra orders, call 1-800-332-5368. ∑ AC Adaptor (p. 7) Order No. PQWATC1461M one ∑ Telephone Line Cord (p. 7) one ∑ Handset Cover (p. 8) Order No. PQYNTC1484F (Blue) PQYNTC1484R (Red) one ∑ Belt Clip (p. 27) Order No.
For assistance, please call: 1-800-211-PANA(7262) For Best Performance 3 Battery Charge A rechargeable Ni-Cd battery powers the handset. Charge the battery for about 15 hours before initial use (p. 8). Raise the antenna. Away from electrical appliances such as a TV or personal computer.
Preparation Location of Controls ............... 5 Settings ..................................... 7 Connections ............................. 7 Installing the Battery ................. 8 Battery Charge ......................... 8 Ringer Volume .......
Location of Controls “ 5 Preparation For assistance, please call: 1-800-211-PANA(7262) Base unit Charge Contacts (p. 9) IN USE/CHARGE Indicator (p. 8, 25) (HANDSETLOCATOR) (p.
“ Location of Controls 6 Handset Antenna (PAUSE/REDIAL) (p . 11, 26) Charge Contacts (p . 9) (–– – /FLASH) (p. 11, 12, 26) (AUTO/PROGRAM) (p . 18, 20, 22) (MUTE/CLEAR) (p . 12, 19, 24) (OFF) (p . 11, 15) RINGER Selector (p . 9) ($) (T ONE) (p .
Settings “ 7 Preparation For assistance, please call: 1-800-211-PANA(7262) Connections Power Outlet (AC 120 V, 60 Hz) Telephone Line Cord Single-Line Telephone Jack (RJ11C) Raise the antenna. AC Adaptor Fasten the AC adaptor cord to prevent it from being disconnected.
“ Settings 8 Battery Charge Place the handset on the base unit and charge for about 15 hours before initial use. ≥ The IN USE/CHARGE indicator lights and a beep sounds. OR IN USE/CHARGE Indicator Installing the Battery Install the battery and close the handset cover, locking it into place.
9 Preparation For assistance, please call: 1-800-211-PANA(7262) Battery information After your Panasonic battery is fully charged (p. 8): ≥ The battery operating time may be shortened depending on usage conditions, such as viewing the Caller ID Caller List or phone book, and ambient temperature.
Programmable Functions 10 Display Language You can select ENGLISH, SPANISH or FRENCH as the display language. Your phone comes from the factory set to ENGLISH. If you want to select the other language, program as follows: 1 Press (CH/FUNCTION) . ≥ The current setting is displayed.
Making Calls “ 11 Basic Operation For assistance, please call: 1-800-211-PANA(7262) 1 Press . ≥ After a few seconds, the display will show the receiver volume. 2 Dial a telephone number. ≥ The dialed number is displayed. 3 To hang up, press (OFF) or place the handset on the base unit.
To select the receiver volume Press (‹) or (›) while talking. ≥ Each time you press (‹) or (›) , the volume level will change by 4 levels. Answering Calls “ Making calls 12 When a call is received, the unit rings and the IN USE/CHARGE indicator on the base unit flashes quickly.
For assistance, please call: 1-800-211-PANA(7262) 13 Basic Operation The display shows the caller’s name, phone number and the date and time received after the first ring. After you answer the call, the display will show the receiver volume. Caller ID Service “ This unit is compatible with a Caller ID service offered by your telephone company.
“ Caller ID Service 14 To check the number of new calls If you have received 10 new calls, the display will show the following: NEW CALL 10 ≥ Caller information cannot be displayed in the following cases: ≥ — If the caller dialed from an area which does not provide a Caller ID service, the display will show “ OUT OF AREA ”.
Using the Caller List “ 15 Basic Operation For assistance, please call: 1-800-211-PANA(7262) Viewing the Caller List To check who has called, follow the steps below. Make sure the unit is in the standby mode. 1 Lift the handset off the base unit and press (›) or (‹) to enter the Caller List.
“ Using the Caller List 16 Ex. When you search from the most recent call: Lift the handset off the base unit and press (›) . ≥ If there is no name information for a caller, the display will only show the phone number. To return to the previous caller, press (‹) .
17 Basic Operation For assistance, please call: 1-800-211-PANA(7262) “ Editing the Caller’s Phone Number The unit can edit a phone number into one of 3 patterns. Make sure the unit is in the standby mode. 1 Lift the handset off the base unit and press (›) or (‹) to enter the Caller List.
“ Using the Caller List 18 Storing Caller List Information in the Phone Book You can store numbers that are in the Caller List in the phone book. Make sure the unit is in the standby mode. 1 Lift the handset off the base unit and press (›) or (‹) to enter the Caller List.
19 Basic Operation For assistance, please call: 1-800-211-PANA(7262) Erasing Caller List Information After checking the Caller List, you can erase some or all of the entries.
Phone Book 20 You can store up to 10 names and phone numbers in the phone book. Using the phone book, you can make a call by selecting a name on the handset display. Storing Names and Numbers Make sure the unit is in the standby mode. 1 Press (AUTO/PROGRAM) .
For assistance, please call: 1-800-211-PANA(7262) “ 21 Advanced Operation For example, to enter “TOM”: 1 Press (AUTO/PROGRAM) . 2 Press a memory station number ( (0) to (9) ). 3 Press (EDIT) . 4 Press (8) . 5 Press (6) three times, then wait for 3 seconds.
Finding Stored Items Make sure the unit is in the standby mode. 1 Press (AUTO/PROGRAM) . 2 Press (‹) or (›) . ≥ The first item or last item is displayed. 3 Scroll to the desired item by using (‹) or (›) . ≥ You can find the items using the memory station numbers ( (0) to (9) ) directly in step 2.
“ 23 Advanced Operation For assistance, please call: 1-800-211-PANA(7262) Editing Make sure the unit is in the standby mode. 1 Press (AUTO/PROGRAM) . 2 Press (‹) or (›) . ≥ The first item or last item is displayed. 3 Scroll to the phone book item you want to change by using (‹) or (›) , and press (EDIT) .
“ Phone Book 24 Erasing Make sure the unit is in the standby mode. To erase a specific caller from the Phone book 1 Press (AUTO/PROGRAM) . 2 Press (‹) or (›) . ≥ The first item or last item is displayed. 3 Scroll to the phone book item you want to erase by using (‹) or (›) .
Special Features “ 25 Advanced Operation For assistance, please call: 1-800-211-PANA(7262) Handset Locator You can locate the handset or page the handset user with beep tones from the base unit. 1 Press (HANDSETLOCATOR) . ≥ The IN USE/CHARGE indicator flashes.
Call Waiting Caller ID Feature Call Waiting Caller ID Feature allows your unit to display the second caller ’ s information. After you hear a call-waiting tone while talking, the unit will display the caller ’ s name, the phone number and the date and time received.
For assistance, please call: 1-800-211-PANA(7262) 27 Useful Information Belt Clip You can hang the handset on your belt or pocket using the belt clip. To attach the belt clip To remove the belt clip Headset Jack When an optional headset is connected to the handset, make sure to use the headset to talk with the caller.
28 Wall Mounting This unit can be mounted on a wall phone plate. 1 Push the lower side of the hook ( 1 ) and pull down the hook until it locks ( 2 ), so the tab holds the handset . 3 Connect the AC adaptor. Tuck the telephone line cord inside the wall mounting adaptor, then push it in the direction of the arrow ( 1 and 2 ).
29 Useful Information For assistance, please call: 1-800-211-PANA(7262) 5 To charge the battery: Fit the handset hole in the tab ( 1 ) and fi x the charge contacts ( 2 ). ≥ Make sure to place the handset with the keypad facing down. ≥ The IN USE/CHARGE indicator lights.
30 If “ RECHARGE ” and “” are displayed after a few telephone calls even if the battery was fully charged, replace the battery with a new Panasonic PQWBTC1461M (P-P504) battery. To order, call the accessories telephone number on page 2. 2 1 Battery Replacement Black Lead Red Lead 3 Close the cover.
Troubleshooting “ 31 Useful Information For assistance, please call: 1-800-211-PANA(7262) Problem The unit does not work. An alarm tone sounds. Static, sound cuts in/out, fades. Interference from other electrical units. The handset does not ring. The handset display is blank.
32 “ Troubleshooting Problem You cannot store a name and phone number in the phone book. While programming or searching, the handset starts to ring and stops the program/search. The handset does not display the caller ’ s name and/or phone number.
33 Useful Information For assistance, please call: 1-800-211-PANA(7262) Problem You cannot redial by pressing (PAUSE/REDIAL) . “ RECHARGE ” and “” are displayed or the handset beeps intermittently. While talking, the call is disconnected. You charged the battery fully, but “ RECHARGE ” and “” are still displayed.
34 Important Safety Instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fi re, electric shock, or personal injury. 1 1. Read and understand all instructions. 1 2. Follow all warnings and instructions marked on this unit.
For assistance, please call: 1-800-211-PANA(7262) 35 Useful Information CAUTION: To reduce the risk of fi re or injury to persons, read and follow these instructions. 1. Use only the battery(ies) speci fi ed. 2. Do not dispose of the battery(ies) in a fi re.
36 FCC and Other Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identi fi er in the format US:AAA-----.
37 Useful Information For assistance, please call: 1-800-211-PANA(7262) “ WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and brie fl y explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such as early morning or late evenings.
“ FCC and Other Information 38 ≥ Environment — do not place the unit in a room where the temperature is less than 5 o C (41 o F) or greater than 40 o C (104 o F). Allow 10 cm (4 q ) clearance around the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.
39 Useful Information For assistance, please call: 1-800-211-PANA(7262) Specifications ∫ Base unit Power Supply: AC Adaptor (120 V AC, 60 Hz) Power Consumption: Standby: Approx. 3.1 W Maximum: Approx. 4 W Frequency: 902.1 MHz – 904.05 MHz Dimensions (H k k W k k D): Approx.
40 Index A Accessories .................................. 2 Answering calls ........................... 12 Automatic Security Code Setting ...................................... 25 B Backlit LCD ................................. 12 Base Unit location .
41 Panasonic Telephone Limited Warranty Limited Warranty Coverage If your telephone (identi fi ed in your Operating Instructions) does not work properly because of a defect in materials or workmanshi.
42 THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
43 For product service ≥ Call 1-800-211-PANA(7262) or 1-800-833-9626 for the location of an authorized servicenter. ≥ Panasonic ’ s e-mail address for customer inquiries: consumerproducts@panasonic.com for customers in the USA or Puerto Rico ONLY When you ship the product ≥ Carefully pack your unit, preferably in the original carton.
PQQX13745ZA F0303-0 D Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infanter í a, Km.
Ein wichtiger Punkt beim Kauf des Geräts Panasonic KX-TC1484F (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic KX-TC1484F noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic KX-TC1484F - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic KX-TC1484F reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic KX-TC1484F erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic KX-TC1484F besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic KX-TC1484F verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic KX-TC1484F. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic KX-TC1484F gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
