Benutzeranleitung / Produktwartung KX-T2470 des Produzenten Panasonic
Zur Seite of 41
Panasonic Integrated Telephone Answering System EASA-PHONE' MoDELro KX-T2470 Pulse-or-tone dialing capability.
ry Features 'l'hrurk you lirr.your purchasing the Panasonic telephone snswrring syslcm. Volcc Syntheclzed Announcements lor lhe time of day, remote menu, memo check, number of calls, and time/day stamp on each incoming message (lCM). LCD Readout for the clock, number of messages, OGM 1/2, OGM tape counter, OGM error, and announce modes.
_"tF -- _Y* Contents Features .. .... I-II Contents ... III-VI Preparation * $ t L IncludedAccessories ......1 Location of Controls. 3-6 lnsertingtheTapes ..,,....7 Connection .. .. .. . 8 Initial Settings .....9 Setting the Time and Day 11 Initial Programming.
Answering Machine Setting the Answering Machine to Record Incoming Messages Recording from the beginning of the ICM tape . . Recording after the last recorded message Recording after the messages you want to save .
Included Accessories ACadaptor .. one KX-A11 Telephonecord .... one Handset ,,.... one Memory Card Use a pencil or a ball-point pen to fill in the station directory with station name. (You can use the reverse side for writing, too.) oRemove the cover using an instrument with a pointed end, like a pen.
Location of Controls w" iilllitilll ri:.,:r,'.' ! o rtl ,'ol !, o 5 i**ir rliUi]i.i ? o @ @ @ @ @ o @ @ @ @ @ @ @ @ @ @ @ @ @ @ &. * ? + f t * t a: TRANSFER indicator Lights when the transfer mode is set. Flashes when the unit is resetting the OGM tape.
W f' Location of Controls (cont.) .,:!lilll. :l:"'lj ', ! o T' 0) o t o = @ @ @ @ @ @ Handset FLASH button Used to access some of the features of your host PBX. VOICE MEMO CHECK button Used to confirm the stored telephone numbers in the memory stations.
Inserting the Tapes ! o at E' ,' Ol ;6' tr= i ti;rt,,,r,'i,r:],j,,, ,l> nl*ll il Power outlet 120V,60Hz) ffi Connection Do not use any handset other than Panasonic handset for model KX-r2470. Single-line modular jack (AC Be sure to insert the tapes before connecting the AC adaptor.
- Initial Settings Ringer volume Dialing mode DIALINC MADE IONE .. PULSf Adjust the Volume. The central position is usually the best. oHIGH: The ringing sound will be high. oLOW: The ringing sound will be low. oOFF: The telephone will not ring. Set to TONE.
Setting the Time and Day lf a power failure has taken place, the indication "o" 12:00" on the display will flash, In this case, set the correct time.
Initial Programming Selecting the CPC (Galling Party Control) The initial setting of the CPC mode is "A". o"A" mode: Use this mode if your telephone line does not have call waiting service. o"B" mode: Use this mode if your telephone line has call waiting service.
Initial Programmihg rcont.) Be sure that the handset is on the cradle. the SP-PHONE indicator is off and the AC adaptor is connected. Press the PROGRAM button. The MUTE/STORE indicator lights. ilri. ir,l ;:t r',O .tl .r.!) ::ii lii!, o 5 t. 1 I ttl+ [*" Zl W^01.
Initial Programmihg rcont.) Selecting the caller's recording time The caller's recording time can be programmed to "VOX", "1 Minute" or "Announce only". The initial setting of the recording time is "VOX (unlimited)".
Initial Programming (cont.) Setting the remote code Before operation, choose a 1-3-digit remote code number (1 through gg9) and store it in memory. The initial setting of the remote code is "1 1 1". ll, '' ilji l il.v ut lrt {rlO gE &A' $-r *n, XFI $"o &J s F] $ & E;r, rillll,:rll,i,li irl:'rl.
Recording an Outgoing Message (OGM) The OGM tells the caller that you are out, and asks lo leavo a mesBage. You can record two OGMs. I OGM 1's recording time is limited to 30 seconds. So you mRy loave a short message. f OGM 2 is an extended OGM and ils recordinq lime may llo rrp lo llrr.
Recording an Outgoing Message (cont.) .r- I I I Checking your recorded message (OGM) Press the OGM SELECT button (OGM 1 or OGM 2). The unit announces "One" or "Two". The selected OGM's indication on the display flashes at first, then it will switch to a steady light after the OGM tape has been reser.
Manual Dialing and Receiving Making calls using the handset 1 Lift the handset. 2 Dialthe telephone number. Making calls using the SP-PHONE button (on-hook dialing) Press the SP-PHONE button, and dialthe telephone number The SP-PHONE indicator lights.
Automatic Dialing (cont.) Be sure that the handset is on the cradle, the SP-PHONE indicator is off and the AC adaptor is connected. When you store a telephone number into memory, pressing the #, *, PAUSE or FLASH button count as 1 digit.
Automatic Dial ihg rcont.) Storing telephone numbers with secret feature This function is useful for keeping a telephone number secret. Press the SECRET STORE button instead of pressing AUTO/STORE button during programmrng. The secret telephone number will not be seen on the display and will not be announced by voice memo check.
i 1 Automatic Dialing (cont.) Erasing a stored number Erasing a number stored for one-touch dialing Press the PROGRAM button. The MUTE/STORE indicator lights. Press the direct call button where the number that you want to erase is stored. The MUTE/STORE indicator goes out.
Other Operation Redial The last dialed number will be stored into memory up to 30 digits. The REDIAL button allows the unit to redial the number automaticallv. When using a handset Lift the handset, and press the REDIAL button. You can redial once. rr i I x rf .
%%:% vg Other Operatioll (cont.) Tone Use the TONE button when you have rotary telephone service. Pressing it will allow you to change from pulse to tone mode during a dialing operation, and enter special tones and codes to operate answering machines, electronic banking services and other soecial services.
Combination Dialing A telephone number with more than 16 digits can be stored into two memory stations. For dialing, follow the next: 1 Lift the handset or press the SP-PHONE button. 2 Press the station key "1". 3 Press the station key "2".
Setting the Answering Machine to Record Incoming Messages Press the POWER ON/OFF button to turn on the unit. (The POWER indicator lights.) After 7 seconds, the unit will be ready to answer the calls. (Answer mode) lN USE indicator REW button Answer mode When a call is received, the unit answers calls.
I i I { I Listening to the Recorded Messages Voice time/day stamp When the messages are received, a synthesized voice announcement of the time and day will be recorded on the ICM tape after the recorded messages. lf the voice time/day stamp is not recorded after the recorded messages, the time and day must be set again (See pages 1 1 and 12.
Voice Menu Remote synthesized voice instruction You can retrieve the Incoming Messages from a remote location with a tone telephone. The remote operation is simplified by a synthesized voice that offers you options over the telephone.
Voice MenU (cont.) Playback The unit rewinds the tape and play back all the recorded messages. oAfter the last message, the voice will say, "End offinal message". o lf you want to operate in succession, wait for 5 seconds. The unit will re-start Voice Menu from the beginning.
Direct Remote Operation (cont.) Resetting the ICM tape for future message After listening to the recorded messages, you can reset the ICM tape and record new messages from the beginning. When the recorded messages have been played back or while they are being played: Prgss "3".
Direct Remote Operation (cont.) Recording a new OGM (Outgoing Message) You can change the content of your OGM tape from a remote telephone. Callyour unit. Example rtmwt t] ] t9_] Re-recording OGM 1 Changing OGM mode (1 or 2) You can change your OGM mode.
Direct Remote Operation (cont.) Turning on the speakerphone (Answer Back) You can monitor the sound in the room where the unit is installed and speak with anyone in the room where the unit is installed by remotely turning the speakerphone. Callyour unit.
* '"::r'' ''ii Transferring the ICM lf a telephone number is stored into the transfer station and the unit is set to the transfer mode, each time an ICM is recorded, the unit will automatically dial the number to which the ICM is to be transferred.
memory station Transferring the ICM (cont.) ,., ,rrfl|E Storing the telephone number Into thc transfer Press the PROGRAM button. The MUTE/SfOHt In(ltontor lrtlhts. Press the LOWER button. The MUTE/STORE hdicator llashes. Press the TRANSFER button. The MUTE/STORE indicator goes out.
1 Transferring the ICM (cont.) Listening to the transferred IGM Each time an Incoming message is recorded, the unit will automatically dial the phone number to which the Incoming Message is transferred. Lift the handset when the telephone rings. You will hear your transfer OGM.
I f Other Features Recording a personal messagcf (Message Memo) Anyone may record a message memo at home on the tape. lt will be heard by anyone retrieving messages from a remote Phone. ir,{o+, fifl Press the MEMO12WAY button until a beep sounds. The lN USE indicator lights.
T ; fr f ; $ Adjust the VOLUME control. * $ * * 1 Other Featufes (cont.) Screening incoming calls While an Incoming Message is being recorded, you can screen it. Then you may choose to lift the telephone handset or press the SP-PHONE button and speak to the caller.
Display Descriptlon (?,'J',i") ^Ntn-An tu._tu The POWER ON/OFF button is set to off. (The POWER indicator is off.) (+ii:,) 6rcm r il Lr5 Outgoing Message is being recorded or played back. Example: "Ll 5 " means 25 seconds elasped.
Troubleshooting Guide Problem Cause & Remedy The unit does not work when I press I Plug in the AC adaptor then press the any button. I pOWf n ON/OFF button to turn on the unit. The unit does not function. However, | .The cassette tape might be broken.
Wall Mounting The unit can be mounted on a wall phone plate. lf you do not have a modular wall phone plate installed, we recommend that you consult with your telephone company or an installer. Unplug the handset cord from the unit. Turn around the handset hook.
Accessory Order Information o Replacement parts and accessories are available through your local authorized parts distributor. oFor the authorized distributors in your area, call toll lree: 1-800-545-2672 Part No.
I I c, $ Maintenance Because the head and capstan assemblies are in contact with the tape, dirt and residue from the tape can easily adhere to these parts, causing distortion. These parts should be cleaned periodically in the manner described below. Clean the head surtace, pinch roller and capstan with a cotton swab.
OGM and ICM cassette tapes oFor optimum sound quality and performance, we recommend that you use side two after six months and replace the tape every year assuming that the unit answers about ten calls a day. oShould the cassette tape break or become worn, replace it with a high quality "NORMAL" tape.
Ein wichtiger Punkt beim Kauf des Geräts Panasonic KX-T2470 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic KX-T2470 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic KX-T2470 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic KX-T2470 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic KX-T2470 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic KX-T2470 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic KX-T2470 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic KX-T2470. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic KX-T2470 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
