Benutzeranleitung / Produktwartung DMR-ES20DEB des Produzenten Panasonic
Zur Seite of 56
Operating Instructions DVD Recorder Model No. DMR-ES20DEB Before connecting, operating or adjusting this product, please read the instructions completely .
T able of Contents 2 Page Page Page 23 DIRECT NA VIGA T OR 3 Quick View 23 35-36 Before Y ou Start 4-5 Chapter View 37 Included Accessories 4 Manual Skip 24 Product Introduction 5 PLA YLISTS 38 Remote.
Safety Precautions ! The moulded three pin mains plug is supplied for your safety and convenience and must NOT be cut of f. ! A 5 amp fuse is fitted in the mains plug. If the fuse has to be replaced, it must be of the same rating and approved by AST A or BSI to BS1362.
4 Before Y ou Start Matsushita Electric Industrial Co., Ltd. http://www .panasonic.co.jp/global/ 1 . Read the operating instructions , the safety precautions and the information on setting up the unit on page 3 thoroughly before you connect, operate or adjust any settings on the unit.
5 Inserting Batteries The batteries last for about a year , depending on how often you use the remo te con tro l unit. ! Do not mix old with new batteries, or batteries of different types. ! Only use batteries without any harmful substances (lead, cadmium, mercury).
6 Remote control Standby/on switch Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power .
Remote control T rademark Code T rademark Code T rademark Code T rademark Code Panasonic 01-04,45 GOLDST AR/LG 31 MIV AR 24 SALORA 26 AIW A 35 GOODMANS 05,06,31 NEC 36 SAMSUNG 31,32,43 AKAI 27,30 GRUN.
/ x1.3 CH REC OPEN/CLOSE EXT LINK DVD St andby/on switch Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power . Front Panel 5 1 6 7 8 9 4 Open and close the disc tray Channel selector button Record St o p Playback / x1.
9 Display Disc type e.g.: DVD-RAM, DVD-R, ,DVD-RW(VR), DVD-V ideo, Video-CD. Record mode All on : FR mode (for flexible recordings or TIMER-controlled recordings). Reading Disc. Current time, Disc recording and playback counter , various messages. External-Link display TIMER-controlled recording.
Y P B P R OPTICAL COMPONENT VIDEO OUT (PROGRESSIVE/ INTERLACE) DIGITAL AUDIO OUT (PCM/BITSTREAM) S VIDEO OUT S VIDEO AV4 IN AV4 IN OUT AUDIO R R L L VIDEO AC IN AV1 (TV) AV2 (EXT) RF OUT RF IN Connect.
Auto-Setup Ch 4 Suche Sender, bitte warten. RETURN: abbrechen 35 Digital Auto-Setup in progress, please wait. RETURN: to abort RETURN Download from TV using ! Switch your television on and select the A V channel. ! Switch the device on using the St andby/on switch .
Y P B P R OPTICAL COMPONENT VIDEO OUT (PROGRESSIVE/ INTERLACE) DIGITAL AUDIO OUT (PCM/BITSTREAM) S VIDEO OUT S VIDEO AV4 IN AV4 IN OUT AUDIO R R L L VIDEO AC IN AV1 (TV) AV2 (EXT) RF OUT RF IN AC mains lead Follow the steps for Auto-Setup without Q Link on page 1 1.
Y P B P R OPTICAL COMPONENT VIDEO OUT (PROGRESSIVE/ INTERLACE) DIGITAL AUDIO OUT (PCM/BITSTREAM) S VIDEO OUT S VIDEO AV4 IN AV4 IN OUT AUDIO R R L L VIDEO AC IN AV1 (TV) AV2 (DECODER/EXT) RF OUT RF IN.
Y P B P R OPTICAL COMPONENT VIDEO OUT (PROGRESSIVE/ INTERLACE) DIGITAL AUDIO OUT (PCM/BITSTREAM) S VIDEO OUT S VIDEO AV4 IN AV4 IN OUT AUDIO R R L L VIDEO AC IN AV1 (TV) AV2 (EXT) RF OUT RF IN AC IN AC mains socket AC mains lead Connect DVD Recorder and TV set to the AC mains socket.
Removing Interference / Changing RF output channel In some cases, interference (lines or patterning) or a very poor picture may a ppear on the TV when the DVD Recorder is connected. If this happens, follow the steps below to change the RF output channel to remove the interference.
16 COMPONENT VIDEO OUT Connecting a television with COMPONENT VIDEO input socket s ! Press FUNCTIONS in stop mode. ! Use to select [T o Others] and confirm with ENTER . ! Use to select SETUP and confirm with ENTER . ! Use to select [Connection], , to select [Progressive] and confirm with ENTER .
17 P B P R Y OPTICAL DIGITAL AUDIO OUT (PCM BITSTREAM) Amplifier (example) OPTICAL Optical digital audio cable Push the jack all the way into the socket with this side facing up .
TV Guide F U N C T I O N S ENTER Direct Access: ! Press GUIDE on your remote control. The TV Guide programme overview is displayed. Access via the FUNCTIONS Menu: ! Press FUNCTIONS on your remote control. ! Use to select [TV Guide] and press ENTER . The TV Guide programme overview is displayed.
TV Guide Selecting the programme from Prog. T ype in the TV Guide ! Press GUIDE to open the TV Guide . The Programme T ype function let s you display a TV Guide list sorted by programme types (e.g. Movies, S ports). ! Press the Blue button to display the list of programme types.
PROTECT Cartridge Only play round discs. Cleaning DVD-Videos, V ideo CDs and CDs If the disc is dirty , wipe it with a moist and then a dry cloth. Bad scratches and stubborn dirt may not be able to be removed so that recording, editing or playback is still compromised even after cleaning.
DVD- V -R +R DVD- V DVD -V () -RW V DVD- V RAM DVD- V DVD- A () -RW VR CD VCD DVD- V unfinalised finalised 4.7GB / 9.4GB, 12cm 2.8GB, 8cm rewritable TIME SLIP function, CPRM compatible, supports 2 channel sound, 16:9 format,creation of playback lists, deleting individual titles frees up storage space unfinalised finalised 4.
Playback CD VCD DVD- V DVD- A RAM -R () -RW V +R () -RW VR Playback ! Press OPEN/CLOSE to open the disc tray . ! Place the disc in the disc tray . ! Press PLA Y . The disc tray is closed and playback begins. The reading of the disc may take some time! Playback begins with the last recorded title.
VCD Playback RAM -R () -RW V +R () -RW VR ! Press DIRECT NA VIGA TOR . ! Use to select the desired title and confirm with ENTER . ! Press RETURN to exit the menu. Selecting programmes/ti tl es f or p la yb a ck Y ou can display the menu during playback, recording and in stop mode using the DIRECT NA VIGA TOR button.
RAM Splitting a recording into chapters ! Press CREA TE CHAPTER during playback. During playback press SKIP or SKIP to skip the chapter. CREA TE CHAPTER TIME SLIP REC PLA Y 0 min RAM ! Press TIME SLIP . ! Use to select the time that the playback should jump forward or back.
MP3 playback CD (MP3) MENU No. 0 9 -- No. Group 1 : Set Me Free T otal Track Tree 10 Prev . 1 01- Father Next G 1 T 1 TOT AL 1/ 12 SELECT RETURN ENTER Page 001/002 01- We Seek His Face 2 1 4 5 6 7 8 9.
CD (JPEG) ! Press DIRECT NA VIGA TOR . The PICTURE (JPEG) VIEW appears on the screen. ! Use to select the desired picture and start picture playback using ENTER . ! Use STOP or DIRECT NA VIGA TOR to return to PICTURE (JPEG) VIEW. T o select a picture using the numeric buttons, press e.
RAM 49 RAM -R () -RW V +R +R () -RW V Recording Pause during recording ! Press P AUSE to pause the recording. ! Press P AUSE again to resume recording. The title is not divided. ! Use CH , or the numeric buttons to select the TV channel. ! Use INPUT SELECT to select the A V channel for externally connected devices.
DVD-RAM REC 83 BBC1 XP SP LP EP (6 Hours)* EP (8 Hours) 44 -R () -RW V +R RAM -R () -RW V +R FLEXIBLE REC Recording in FR mode. Maximum rec. time 1 Hour 49 Min. 1 Hour 49 Min. Set rec. time Start Cancel RETURN SELECT Recording * Only if the Recording time in EP mode setting in the SETUP menu is set to [EP (6Hours)].
RAM -R () -RW V +R Manual programming ! Press PROG/CHECK . The TIMER RECORDING screen appears. ! Confirm the highlighted line with ENTER . ! Use to select the name of the TV st ation. ! Use to switch to the next field and change entry using . Name, Date, S tart and S top can also be entered using the numeric buttons.
TIMER RECORDING in the TV Guide Name, Date, S tart, S top and Programme Name are taken from the TV Guide. Y ou can select a programme that you want to record in the TV Guide list and transfer it directly to the TIMER RECORDING menu. ! Press GUIDE to open the TV Guide.
VIDEO Plus+ Remain 1:58 SP 12:09:37 18/ 1 1 THU ENTER RETURN Nr. 0 9 8 5 3 4 2 Enter PlusCode Number by using 0-9 keys. TIMER RECORDING Remain 1:58 SP 12:09:37 18/ 1 1 THU ENTER RETURN CANCEL Date Start Stop Mode SP ON Name No. 0 9 Press ENTER to store the programme.
If the television is connected to the A V1 connection via the 21-pin Scart cable, the picture to be recorded appears on the screen. The beginning of the recording may not be recorded correctly in certain cases. The Ext Link 2 setting cannot be used if the input signal is in NTSC format.
35 - 37 27 - 32 31 38 - 40 28 49 - 50 Y our electronic programme guide Y ou can access the main functions via the FUNC TION S se lect ion menu . The illustrations show DVD-RAM menus. The menu entries can be different depending on the disc or medium. MP3&JPEG ! Press FUNCTIONS in stop mode.
Entering T ext Y ou can give discs or programmes titles in various menus: In DISC MANAGEMENT , in DIRECT NA VIGA TOR, in the PLA YLIST and when setting the TIMER-controlled recording. Entering a Disc Name or Title via the Menu ! Use ! Use ! ! ! to select the desired character and confirm with ENTER .
FUNCTIONS Selection Menu Access via the FUNCTIONS menu ! Press FUNCTIONS in stop mode. ! Confirm DIRECT NA VIGA TOR with ENTER . Use [Previous] or [Next] to select other pages and press ENTER . ! Select the desired title and start playback with ENTER .
FUNCTIONS Selection Menu 01 DIRECT NA VIGAT OR DVD-RAM 34 Set up Protection, Cancel Protection ! Us e to select [Set up Protection] or [C anc el Pro te cti on] and confirm with ENTER . ! Use to select [Y es] and confirm with ENTER . Enter Name The complete name is displayed in the sub menu [Properties].
RAM RAM RAM Create Chapter ! Use to select [Create Chapter] and confirm with ENTER . ! Press ENTER where you want to create the chapter . ! Repeat this step to create more chapters. ! Use to select [Exit] and confirm with ENTER . A short section of the recording right before the diving point may be lost.
FUNCTIONS Selection Menu RAM Insert a recorded disc. If write protection is activated, deactivate it. ! In the Create menu, use to select the Source T itle and press SUB MENU . ! Confirm [Create Chapter] with ENTER . ! In the [Create Source Chap.] Menu, use ENTER to select the chapter sections.
PLA YLISTS Change Thumbnail Change 0:00.02 Change Exit 0:00.02 DVD-RAM Copy Copy PLA YLIST Copy Cancel Erase Properties Edit Chapter View Create Copy Enter Name Change Thumbnail RETURN SELECT ENTER 02 Start play and select the image of a thumbnail. 34 38 Create ! Confirm [Create] with ENTER .
FUNCTIONS Selection Menu F U N C T I O N S PLA YLISTS T o Others Add Chapter ! Press FUNCTIONS . ! Use to select [T o Others] and confirm with ENTER . ! Confirm PLA YLISTS with ENTER . ! In PLA YLIST VIEW , use to select a playlist. ! Press SUB MENU .
41 FUNCTIONS Selection Menu SETUP ! Press FUNCTIONS in stop mode. ! Use to selec t [T o Others] and confirm with ENTER . ! Use to select SETUP and confirm with ENTER . ! Use to select the desired sub menu and use to switch to setting. ! Use to select the desired setting and confirm with ENTER .
42 FUNCTIONS Selection Menu SETUP T o Others F U N C T I O N S T uning Edit Profiles ENTER SETUP Disc Picture Sound Display Connection Others Edit Profiles Auto-Setup Restart T uning Digital Add New D.
Add New DVB Service RETURN ENTER Add New DVB Service The station search begins automatically . ! T o stop the station search early , press RETURN . The channels found up to the abort of the station search are stored. T uning Add New DVB Service ENTER Auto-Setup Restart Use to select [Y es] and confirm with ENTER .
ENTER T uning Manual Deleting T elevision S tations ! Use to select the station that you want to delete. ! Press the red Button to delete the station. The settings of the programme position are deleted. C ha n gi n g t h e Name of the T elevision St ation ! Use to select the name of the television station and confirm with ENTER .
ENTER ENTER Picture Settings Option T uning Others Disc Picture Sound Display Connection SETUP Comb Filter On Still Mode Automatic SELECT RETURN TA B Comb Filter Still Mode Frames are still images that together form a moving picture. A full frame is made up of 2 half frames.
ENTER ENTER Display Settings Option ENTER ENTER Connection Settings Option T uning Others Disc Picture Sound Display Connection SETUP TV Aspect 16:9 Progressive Off TV System PA L A V1 Output RGB A V2 Settings SELECT RETURN TA B On-Screen Messages Grey Background On: The grey background is displayed when there is no television reception.
T uning Disc Picture Sound Display Connection SETUP Others SELECT RETURN TA B 7 Remote Control Clock Owner ID Change the code of the remote control so that you can also use another it a t t he same time.
T uning Disc Picture Sound Display Connection SETUP Others On On EPG Download in Standby Software Update in Standby Software Update Search Now System Update Software Update in Standby Software Update Search Now EPG Download in Standby DVB V ersion: 0.
Disc Formatierung Disc Protection Set up Disc Protection ? Yes DISC MANAGEMENT DVD-RAM Remain 0:59(XP) Off Disc Name Title No. 1 Used 0:01 Format Disc Disc Protection Erase all titles RETURN SELECT ENTER Disc Formatierung Erase all titles All titles and PLA YLISTS will be erased.
Finalize Finalizing is necessary for compatible playback. It will take approximately 15 minutes. Finalize the disc ? Finalize Finalize will make this disc playback only . Start finalizing the disc ? Ye s No Start Cancel DISC MANAGEMENT DVD-R Remain 0:59(XP) T op Menu Disc Name Title No.
DISPLA Y menus Soundtrack Subtitle Angle DVD- V DVD- A DVD- V DVD- A DVD- R RAM DVD- V DVD- A DVD- V DVD- A DVD- R RAM DVD- V DVD- A Disc Play Picture Sound Other Soundtrack Subtitle Angle 1 ENG Digital 2/Och Off 1 Eng 1 Audio channel PBC STILL-P . DVD- A DISPLA Y menus contain information on the disc or the unit.
ST A TUS displays (Banner) Signal Condition Category Change Profile Encrypted Multi-Audio TXT Subtitle info Now / Next P AGE CH 1 Name 10:46 Title 1 BBC ONE W ALES Bad Signal 10:46 PROFILE 1 Coronation Street Change Category 20:00 ~ 20:55 Now info Encrypted Multi-Audio TXT Subtitle Appears if subtitles are available for the current programme.
53 1 3 2 DVD-RAM 10 DVB BBC1 PLA Y 10:07:21 1/12 T14 0:05.14 SP Remain 0:50 SP 4 5 6 7 T14 0:05.14 SP ST A TUS displays ! Press ST A TUS . ! Press ST A TUS again . The display changes each time that the button is pressed. ! T o exit the display , press ST A TUS .
Before requesting service FUNCTION PICTURE SOUND 10 46 53 88 17 No function possible. The unit is switched on but cannot be used. The error code « H », « U » or « F » appears : The unit automatically switches to standby mode. No picture. T elevision reception worsens when the unit is connected.
Before requesting service î Y ou can manually change the start and end time of TIMER programmes in the TIMER RECORDING menu. Is it possible to programme a recording, with a st art and end time that a.
Index Page A dd New DVB Service 43 Audio channel 28,53 Angle 53 A V1 Output 46 A V2 Input 46 A V2 Settings 46 B anner 52 Bilingual Audio Selection 28,45 Bitstream 45 C D (MP3/JPEG) 25,26 Child lock 7 .
Ein wichtiger Punkt beim Kauf des Geräts Panasonic DMR-ES20DEB (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic DMR-ES20DEB noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic DMR-ES20DEB - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic DMR-ES20DEB reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic DMR-ES20DEB erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic DMR-ES20DEB besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic DMR-ES20DEB verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic DMR-ES20DEB. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic DMR-ES20DEB gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
