Benutzeranleitung / Produktwartung BT-LH1700W des Produzenten Panasonic
Zur Seite of 30
Operating Instructions LCD Video Monitor Model BT- P S0805M1095 -H Printed in Japan VQT0U69-1 ENGLISH D Bef ore oper ating this product, plea se read the instruct ions carefully and sa v e this manual f or future use .
2 indicates safe ty information. g THIS EQUIPMENT MUST BE GROUNDED T o ensure saf e oper ation, the thre e-pin plug must be inser ted only into a sta ndard three-pin po wer outlet which is eff ectiv ely ground ed through normal household wiring.
3 FCC NO TICE (USA) IMPOR T ANT SAFETY INSTR UCTIONS 1) Read these instructions . 2) Keep these instruc tions. 3) Heed all warnings. 4) Follo w all instructions. 5) Do not use this appar atus near w ater . 6) Clean on ly with dr y cloth. 7) Do not b lock an y ven tilation openings.
4 • The liquid crystal por tion is manuf actured with highly precise te chnolog y . It includes ove r 99.99% eff ectiv e pix els, but 0.01% or less of the pix els are either missing, or ha ve fix ed lighting (red, blue , green). This is not a sign of malfunction.
5 The BT -LH1700W liquid crystal monitor was designed especially f or broadcasting service and business use . It is equipped with a high p erf or mance 17.1-inch wide liquid cr ystal display pa nel. g High perf ormance liquid crystal panel This monitor achie ves o utstanding color r eproducti on, a wide vie wing angle , and high-speed response .
6 Video monitor unit Fr ont view Rear vie w Rear panel ( J pa ge 8) An embedde d audio un it (BT -Y AE170 0G) can be attached ( J I nstallation Guide included).
7 PO WER switch This s witches the po wer supply ON/ OFF . When the pow er is ON, the LED (gree n) lights up . INPUT SELECT button This selects the signal input line .
8 SDI (HD/SD) terminal (BNC) IN1 : This is the SDI input ter minal (c ompatible with HD/SD au tomatic switching). IN2 : This is the SDI input ter minal (c ompatible with HD/SD au tomatic switching). SWITCHED OUT : This is the activ e through -out terminal for the SDI inpu t signal being displa yed on the screen.
9 1. Attach the power co rd to the monitor unit. 2. Connect the power cord to the power outlet. g When using e xternal DC po wer (DC11V–17V) Y ou can slide open the po wer cov er , and s witch from A C input to e xter nal DC input. (Wh en shipped from the f actor y , the pow er cov er is up, a nd A C input is selected.
10 Three types of in f or mation are disp la yed on th e screen. The input sig nal status , picture adju sting knob status , and the menu display . 1. The selected input line ( J pa ge 7, ) • VIDEO , Y/C, SDI1, SDI2, YP B P R /RGB-VIDEO/R GB-COMP . 2.
11 1. Push [ME NU] to display the MA IN menu. 2. Push [ , ] to select the men u, then push [ENTER]. 3. Push [ , ] to select the sub menu, the n push [ENTER]. The setting v alues in the sub menu change to green. 4. Push [ , ] to select t he setting v alues, then push [ENTER].
12 Y ou can change the menu se tting v alues and picture adjust ing knob settings, then sav e and load up to 5 combinations of screen adjustme nt values as user dat a. Y ou can also retur n the setting v alues and adjustment v alues to the f actory preset settings .
13 Menu configuration MAIN VIDEO CONFIG SYSTEM CONFIG INPUT SELECT GPI MARKER GAMMA SELECT FILM GAMMA COLOR TEMP . SHARPNESS MODE SHARPNESS H SHARPNESS V I-P MODE MONO ANAMO SD ASPECT SCAN NOISE WIPE .
14 The underlined v alues are f actor y preset setting v alues. *1 When controlling the marker settings using the GPI function ( J page 23), thes e settings become disab led. These are not oper ated when the 2 screen s are displa yed . *2 These are only enab led when the HD signal and SD signal aspect ratio settings are 16: 9.
15 g 16:9 marker (Displa yed when using HD , or when using SD with a 16:9 aspe ct ratio) The marker is only displa yed as a v er tical bar . In addition, the section becomes the “MARKER BACK” item. VIST A marker , CNSCO marker A horizontal dotted line is display e d as the ma rker .
16 The underlined v alues are f actor y preset setting v alues. *1 Even if FILM gamma is changed during 2 screen displa y , only the main window is set, and the changes are not reflected in the sub windo w . *2 When “RGB-COMP . ” is selected in “YP B P R /RGB” in the “INPUT SELECT” menu ( J page 21), this does not operate.
17 g WB adjustment mode Y ou can adjust “WHITE BALA NCE V AR1” – “WHITE BALAN C E V AR3” (WB) by selecting “V AR1” – “V AR3” in “COLOR TEMP . ” in the “VIDEO CO NFIG” menu. The underlined v alues are f actory preset setting v alues.
18 The underlined v alues are f actor y preset setting v alues. *1 When the monitor is shipped f rom the f actory , “USER1” – “USER5” and “F ACT OR Y” all hav e the same det ails. *2 This screen is not displa yed when “RGB-COMP . ” is selected in the “YP B P R /RGB” menu in the “INPUT SELECT” menu.
19 g About the SUB WINDO W Y ou can compare sav ed still and moving images or show the W av e Form Monitor (WFM) by using the “SUB WINDOW” function to separate th e main window into 2 displays as shown below .
20 The “GPI CONTR OL ” item is used to set enable/disab le of all GPI functions, and assigns functio ns to each of the GPI ter minal pins ( J page 23). The underlined v alues are f actor y preset setting v alues. Note: Please be a ware that the f ollowing can not be perf or med.
21 The underlined v alues are f actory preset setting v alues. *1 “A UT O” is set when the monitor is shipped from the factory , but if there are concerns about noise etc. from outside the input signal, we recommend assigning specific f or mat. g COMP .
22 g “PHASE” and “CLOCK” factory preset sett ing valu es Adjusting the speak er output. This can on ly be set when th e monitor is equip ped with an embedded audio unit BT - Y AE1700G (optional). If the monitor is not eq uipped with an embedd ed audio unit, the output will be in analog.
23 REMO TE operation is possible on this monitor using the GPI/RS-232C terminal. Each of the items in the GPI screen a r e compatible with the f ollowing terminals. Y ou can assign functions to each terminal in the menu GPI screen ( J page 20). The functions assign ed to each terminal operate when th e GND (5 Pin) is connected (ON) or open (OFF).
24 g Assignment of item priority levels • When both “MARKER1” and “MARKER2” are ON at the same time, “ MARKER1” has priority . • When both “MARKER BACKHALF” and “MARKER BA C KBLA CK” are ON at the same time, “MARKER BA CKBLACK” has priority .
25 g Setting command No Command Explanation Data Response 1 IIS Input s witch 0: SDI 1 1: SDI2 2: VIDEO 3: YP B P R /RGB 4: Y/C IIS 2 VPS Image qu ality adjustment CON00-60 : Contr ast settings BRI00-.
26 g Query command No Command Explanation Data Response 1 QIS Input select ion 0: SDI1 1 : SDI2 2: YP B P R 3: RGB-V IDEO 4: VIDEO 5: Y/C 6: RGB-COMP .
27 If yo u use rac k-mounting adap tors BT -MA1710G (optiona l) with this monitor , yo u can incor porate a 19 -inch standard rac k (the height is 7U size). Please see the instructions below f or attachment. 1. Remo ve the scre ws on the bac k and base of the monitor (3 place s), and remo ve the stand.
28 Maintenance inspecti ons are necessary for the user to use this equipmen t saf ely . It is impor tant to k eep monitor functions in good condition at all time s through periodical and appropriate maintenance .
29 g List of compatible sign al formats *1 When 1035/59.94I signal is input, displaye d as 1080/59.94I. Other vari ous mar ker displa ys will use the 1080/ 59.94I mark er . *2 When 1035/60I signal is input, di spla yed as 1080/60I. Other v arious marker displays will use the 1080/60I marker .
P © 2005 Matsushita Electric In dustria l Co., Ltd. All Rights Reser ved. P ANA SONIC BRO ADCAST & TELEVISION SYSTEMS COMP ANY UNIT CO MP ANY OF P ANASONIC CO RPORA TION OF NOR TH AMERICA Executi.
Ein wichtiger Punkt beim Kauf des Geräts Panasonic BT-LH1700W (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic BT-LH1700W noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic BT-LH1700W - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic BT-LH1700W reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic BT-LH1700W erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic BT-LH1700W besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic BT-LH1700W verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic BT-LH1700W. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic BT-LH1700W gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
