Benutzeranleitung / Produktwartung TFTV-430 des Produzenten Palsonic
Zur Seite of 43
LCD TV TFTV -430 USER'S MANUAL PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.
Contents Safety Precautions ......................... Important Safety Instructions ........................................................... Overview of TV i. Panel Description .......................................................................
Safety Precautions -1- NOTE TO CABLE/TV INSTALLER: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation.
Important Safety Instructions 1. Read These Instructions - All the safety and operating instructions should be read before the product is operated. 2. Keep These Instructions - The safety and operating instructions should be retained for future reference.
Important Safety Instructions -3- 17. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
Panel Description -4- Overview of TV Press to display the menu of the available viewing sources. Press to display the OSD menu. Press to change the channel. The two buttons also act as direction buttons. Press to adjust volume level. The two buttons also act as direction buttons.
Back Panel Description -5- Overview of TV S-Video or Composite input RGB input Progressive input AV input Power Input Antenna Jack Headphone.
Antenna Connections -6- * For optimum picture quality, adjust antenna direction. Indoor Antenna Connections Typical Wall antenna jack used in apartment buildings, connect the antenna cable as shown below (Please use the correct type of antenna cable according to the type of wall antenna jack).
AV Connections -7- Camcorder Notes: You can connect the TV set with Disc player, Camcorder and VCR following the methods below : 1: S-Video Cable + Audio Cable. Please choose "S-Video" when you select the viewing source. 2: Video Cable + Audio Cable.
DVD Player Connection -8- Notes: Please refer to the methods below to connect TV with DVD Component signal: 1. Connect YCbCr Cable and Audio Cable to corresponding Jacks of DVD Please choose the "YCbCr" when you select viewing source. 2. Connect Progress Scan Cable and Audio Cable to the corresponding jacks of DVD.
PC Connections -9- VGA Cable Notes: Please refer to the upward method to connect TV with set-top Box or PC. 1. Connect VGA Cable and Audio Cable to the corresponding jack of PC or Set-top Box. Please choose "PC" or "YPbPr" when you select viewing source.
Remote Control Overview (All Functions Except Teletext) -10- MUTE One/double/tri-digit select Volume up/down Dual sound selection To freeze current image To set sleep power off time Image page up and .
Remote Control Overview (Teletext Functions) -11- Sound Off Teletext Page Down Teletext List/Flof Teletext Size Teletext Sub-Page Teletext Hold Teletext Store Teletext Reveal Teletext Display/Mix Tele.
Remote Control Operation -12- Batteries installation Remote control direction Point the remote control at the remote sensor. Pull the battery cover upward in the direction shown by the arrow and remove it. Insert the batteries with correct polarity. Make sure there are no objects between the remote control and its sensor.
Basic Operation -13- Turn On/Off 1. Connect the antenna cable to the antenna input port on TV. 2. Connect the adapter to the power input port on TV. 3. Put the power line plug into the jack of adapter. 4. Plug the power cord into the wall power outlet after connecting the power cord to the adapter.
Basic Operation -14- If you want to adjust the display settings, please follow the instruction below. Press the "MENU" button to browse the PICTURE MENU, TV MENU,OPTION MENU, PC MENU in turn.
Picture Menu -15- Menu Operation You can adjust brightness, contrast and colour to meet your favourite picture requirement. Press the "MENU" button to select " Picture" mode. Press " " buttons to select the item you want to adjust.
TV Menu -16- Menu Operation You can set TV program list with Auto Searching function quickly. Press the "MENU" button to select "TV" mode. Press the " " buttons to select "Channel Preset". Press the " " button to enter "Channel Preset".
TV Menu -17- Menu Operation - "Fine tune" helps you adjust specific programs image and sound quality. Press the "MENU" button to select "TV" mode. Press the " " buttons to select "Channel Preset". Press the " " button to enter "Channel Preset".
TV Menu -18- Menu Operation You can also set program list one by one by "Manual searching" function. Press the "MENU" button to select "TV" mode. Press the " " buttons to select "Channel Preset". Press the " " button to enter "Channel Preset".
TV Menu -19- Menu Operation You can change TV system by yourself if necessary. Press the "MENU" button to select "TV" mode. Press the " " buttons to select "Channel Preset". Press the " " button to enter "Channel Preset".
TV Menu -20- Menu Operation If you'd like to exchange the two channels, please use "Channel Exchange". Select current channel from one of the two channels to be exchanged. Press the "MENU" button to select "TV" mode.
Option Menu -21- Menu Operation If you want to change the OSD setting, please enter this menu. Press "MENU" button to select "Option" mode. Select "OSD Set" item, press " " button to enter. Press " " buttons to select the sub item.
Option Menu -22- Menu Operation You can change colour temperature to get a better image effect according to the current circumstance. Press "MENU" button to select "Option" mode. Press " " buttons to select "Display Setting".
Option Menu -23- Menu Operation PIP means picture in picture, the unit can display a sub window on the screen, which displays the program from another video source. This feature is valid when Main Window is in PC mode. You can watch TV or other video on the sub window.
Option Menu -24- Menu Operation In "PIP" mode, you can adjust sub window as follows. Press the "MENU" button to select "Option" mode. Press the " " buttons to select "Display Setting". Select "PIP Setting" with " " buttons and press " " button to enter.
Option Menu -25- Menu Operation You can use this function to adjust the display setting automatically. Press "MENU" button to select "Option" mode. Press " " buttons to select "Display Setting". Press " " button to enter.
Option Menu -26- Menu Operation In Teletext mode, you can enter the menu and set Teletext language and region. For the other operations, please refer to page 32. Press "MENU" button to select "Option" mode. Press " " buttons to select "Teletext Setting".
PC Menu -27- Menu Operation Note: You should set the video signal to "PC" mode before adjusting PC mode setting. Press "MENU" button to enter " PC " mode. Press" " buttons to select the item to be changed. Press " " buttons to adjust the setting.
Functional Button Instruction -28- MUTE Press the button to mute audio, press again to resume. VOL+/- Press "VOL+" button to increase the volume; Press "VOL-" button to decrease the volume. Press this button one time to display "--"on the screen, the channel range will be 00-99.
Functional Button Instruction -29- CH-LIST Press "CH-LIST" button, the Channel list will be displayed on screen. Current channel Use direction buttons to select specific channel. Use "Page Up" and "Page Down" button to switch the listing page.
Functional Button Instruction -30- You can also exchange two channels as follows. Press the "CH-LIST" button ,the channel list will be displayed on the screen. Current channel Use the direction buttons to choose specific channel. Press left button and the following window will be displayed on the screen.
Functional Button Instruction -31- FREEZE Press the button to freeze the current image, press it again to exit the freeze mode. Note: Not available in PC&YPbPr modes. Press direction buttons or "IMAGE" button to select your favourite image mode.
Teletext -32- Teletext is an information system broadcast by certain channels which can be consulted like newspaper. It also offers access to subtitles for viewers with auditive problems or those who are not familiar with the transmission language (cable networks, satellite channels, etc.
Teletext -33- STORE You can store four page numbers in the current channel by pressing Store and numerical buttons. 1. Select the LIST mode using the List/Flof button, then four 3-digit numbers are displayed in different colours. 2. Press the colour buttons of corresponding page that will be replaced.
Play Flash Memory Card -34- Play Flash Memory Card You can enjoy the pictures in your flash card with the TV directly. Several formats files can be played. Flash Memory Card Flash memory card is a small, portable and universal IC recordable card, which has lager memory capacity than floppy disk.
Play Flash Memory Card -35- 1. Insert flash memory card into the card slot. Press the "SOURCE" button to display the main menu and select "Flash Card" with direction buttons. Then press "ENTER" button to confirm. 2. The following menu will be displayed on the screen: File Folder 3.
Play Flash Memory Card -36- Q ZOOM 4/3 Select a folder -- Dirl, then press" ENTER" button and the screen will display as follows. PLAY/PAUSE Press " " button to pause the slide show. Press " " again to continue the slide show.
Stand Uninstallation -37- Please follow the instructions given. 1. Lay the LCD TV/Monitor face-down on a flat surface with a cushion or other soft materials to protect the screen. 2. Remove all cables connected on the TV/Monitor 3. Remove the four screws and then remove the stand from the LCD TV/Monitor.
Maintenance -38- Care for your TV Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have with your TV. Be sure to turn the power off and pull out the plug before you begin any cleaning. 1. 2. Here is a great way to keep the dust off your screen for a while.
Trouble Shooting -39- Please read this user's manual before using the TV set. If you have any troubles in using this TV set, try to solve it by the suggestions mentioned below. If you can not remove the trouble after adopting corresponding suggestions, please contact the technical service centre or dealer authorised by us.
Specifications -40- Power Supply Input: AC 110 - 240V, 50Hz/60Hz Output: DC 12V / 4A Power Consumption Standby: <3W Max: 50W Frequency Horizontal: 30 - 80KHz Vertical: 50 - 75Hz Colour System NTSC / PAL/SECAM VGA Sync.: H/V Separate, TTL, P. or N. Video Signal: 0.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 FKV2.
Ein wichtiger Punkt beim Kauf des Geräts Palsonic TFTV-430 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Palsonic TFTV-430 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Palsonic TFTV-430 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Palsonic TFTV-430 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Palsonic TFTV-430 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Palsonic TFTV-430 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Palsonic TFTV-430 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Palsonic TFTV-430. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Palsonic TFTV-430 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
