Benutzeranleitung / Produktwartung LCD TV COMBO des Produzenten Palsonic
Zur Seite of 38
LCD TV COMBO TFTV1520D USER'S MANUAL.
Table Of Contents Important Safety Instructions -------------------------------------------------------- Characteristic Features ---------------------------------------------------------------- Disc I.
Important Safety Instructions 1 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “Dangerous Voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions 2 Note: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth.
Characteristic Features 3 This product incorporates DVD player, LCD display and TV receiver in one system. Multiple Mode TV mode COMPOSITE mode S-VIDEO mode VGA mode DVD mode High Quality Property High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more than 500 lines.
Disc Information 4 Discs Formats Supported By This Player DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) 242min(SS-DL) 266min(DS-SL) DVD Audio+Video (active picture) 12cm 484min(DS-DL) CD Audio 12cm 74min JPEG Still high resolution 12cm The operating method of some DVD discs is specified by the software maker.
5 Front Panel Front and Side Panel 1. 15" colour TFT screen 15" colour TFT screen clearly shows the data. 2. Power Indicator In normal playback status, it turns green; in standby mode, it turns red. 3. Remote sensor Remote sensor window for the remote control.
Top Panel 6 Top Panel Drawing 1. Input button Press to modes modes among TV, COMPOSITE, S-VIDEO, VGA and DVD. In setup menu, the same function as OK button. 2. MENU button Press to enter or return to the previous setup menu. 3. CH / button While in TV mode, press to select channels In setup menu, the same function as , direction button.
Rear Panel 7 Rear Panel Drawing 1. DC 12V Power Supply Cord Connect the power supply adaptor or the car adaptor 2. VGA Input Jack Connected to the VGA output jack on a personal computer. 3. PC Audio Input Jack Connected to the PC audio output jack. 4.
Remote Control 8 Preparation of Remote Control Using of Remote Control Refer to the drawing and remove the empty battery receptacle. Insert the battery into the receptacle. Make sure the polarity matches the marks inside the component. Insert the receptacle into the remote control.
Remote Control 9 Remote Control Drawing 1. POWER button Press to enter to or exit the standby mode. 2. Input button Press to select mode among TV, COMPOSITE, S-VIDEO, VGA, and DVD. 3. CH+/- button When in TV mode press to select channel. 4. VOL + /- Press to increase or decrease the speaker volume level.
Remote Control 10 17. ZOOM button Press to activate zoom function. Under Teletext mode, press once to display the concealed information, such as solution of riddles or puzzles; press again to resume riddles information from display. 18. INFO. button Press to display reference information of the current program.
System Connections 11 Do not connect the power cord until all other connections have been made. Ensure that you observe the colour cord when connecting audio and video cables.
System Connections 12 Use the audio and video cable to connect the AV input jacks on the rear panel of the unit to the external AV signal source. Use the S-VIDEO cable to connect the S-VIDEO input jack on the rear panel of the unit to the external AV signal source.
System Connections 13 Connecting to PC The unit can be connected to PC (person computer) via the VGA cable. Follow the steps and the figure below to connect. 1. 2. 3. Connect one end of the VGA cable to the VGA input jack on the rear panel and the other end to the PC.
TV Function 14 NOTE: In other mode, you can refer to the following instructions in TV mode to go on with some settings. Only when there are signals, the menus can appear and be set. Preparation 1. 2. After connection, press the POWER button to turn on the power.
TV Function 15 Brightness Setup Press the button to select Brightness and press the button to adjust the value . Press the MENU button to return to the previous menu. Contrast Setup Press the button to select Contrast and press the button to adjust the value.
TV Function 16 When the VGA signal is connected to the unit, the Advanced setup menu is shown below: Press the " " button to select the desired item and press the "ENTER" button to enter it's setup menu. Press the "MENU" button to return to the previous menu.
TV Function 17 Audio Setting Press the MENU button once to enter the setup menu. Press the button to select Audio and press the OK button to enter the menu shown on the right. In the Audio setup menu, press the button to select the desired item. Press the MENU button to return to the previous menu.
TV Function 18 Timer Setting Press the MENU button once to enter the setup menu. Press the button to select Timer and press the OK button to enter the menu shown on the right. In the Timer setup menu, press the button to select Off, 15Min, 30Min, 45Min, 60Min, 75Min, 90Min, 105Min or 120Min.
TV Function 19 Country Press the button to select the Country and press the OK button to enter the menu shown on the right. Press the button to select the desired item. Press the MENU button to return to the previous menu. Auto Scan Press the button to select the Auto Scan and press the OK button to start auto scan.
TV Function 20 Channel Name Press the button to select the Channel Name and press the OK button to enter. Then press the button to select letters or press the number button to input numbers. Press the MENU button to return to the previous menu. Skip Press the button to select Skip and press the OK button to activate or cancel this function.
TV Function 21 CH NO Press the button to select CH NO and press the OK button to enter. Press the number buttons to enter the channel number. Press the button to return to the previous menu. Store Press the button to select Store and press the OK button to store the above operations.
NICAM Function 22 Mono Nicam Mono Mono Stereo The unit support NICAM function under TV mode. Under NICAM TV broadcast: 1. When receiving stereo audio signals, press the STEREO/AUDIO button on the remote control repeatedly to shift the sound tracks between Nicam Stereo and Mono and the screen will appear corresponding display as shown below: 2.
DVD Playback Operation 23 Preparation: After connections, turn on the unit and select the relevant video input before playback. Disc Loading Steps: 1. 2. 3. 4. Press the POWER button to turn on the power. Press the INPUT button and select DVD, press the OK button to confirm and shift to DVD mode.
DVD Playback Operation 24 Pause Press the PAUSE button once to pause the playback; press it repeatedly to start step-by-step playback. Press the PLAY button to resume normal playback.
DVD Playback Operation 25 GOTO During DVD disc playback, press the GOTO button on the remote control once, there will be a menu displayed on the screen. You can set or select items for your preference. Use the direction buttons to select items and press the OK button to enter and use the direction buttons to select the desired item.
DVD Playback Operation 26 Repeat Use the REPEAT button repeatedly to repeat Track, All or to cancel repeat. Some discs do not support the repeat function. Audio During CD playback, press the AUDIO button on the remote control to select the audio output mode: Mono Left, Mono Right, Mix-Mono and Stereo.
DVD Playback Operation 27 Repeat During playback, press the REPEAT button repeatedly, and the repeat modes are Shuffle, Random, Single, Repeat One, Repeat All and Repeat Off. Previous and Next During playback, press the or button to select picture. Menu Press the MENU button once to stop playback and return to the root menu.
DVD System Setup 28 - - General Setup Page - - TV Display Angle Mark OSD Lang Captions Screen Saver Last Memory Go To General Setup Page Preparations 1. 2. 3. 4. 5. Connect to the power supply and turn on the unit. Press the INPUT button to shift to DVD mode.
DVD System Setup 29 OSD Lang Captions Screen Saver Last Memory The item is used to select the OSD language. 1. 2. 3. 4. Press the direction buttons to select OSD Lang . Press the OK button to enter the setup. Use the direction buttons to select items.
DVD System Setup 30 Speaker Setup Page Press the DVD SETUP button to enter the General setup menu, then use the direction buttons to select Speaker Setup Page, the screen will display as the below: In the menu, press the ENTER or direction button to enter.
DVD System Setup 31 Brightness Brightness 0 Dynamic 1. 2. 3. 4. 5. 6. Press the direction buttons to select Dynamic. Press the OK button to enter the setup, the screen will display as left: Press the OK button to enter. Use the direction buttons to adjust.
DVD System Setup 32 Preference Setup Press the DVD SETUP button to enter the General setup menu, then use the direction buttons to select Preference Page, the screen will display as the below: In the menu, press the ENTER or direction button to enter.
DVD System Setup 33 Disc Menu Default 1. 2. 3. 4. Press the direction buttons to select Disc Menu . Press the OK button to enter the setup, see the left figure: Press the direction buttons to select Menu language. Press the OK button again to confirm setting and return.
Troubleshooting 34 SYMPTOM CHECK ITEM The player cannot play. Make sure disc tray is closed Make sure disc is loaded in. Make sure disc is loaded correctly. Make sure disc is not dirty or warped. Make sure the player’s region code is the same as region code of DVD disc.
Specifications 35 TFT-LCD Resolution 1024 x 768 TFT-LCD Screen Size 15 inches Power AC100~240V, 50/60Hz DC 12V 5A Power Consumption < 60W Dimension 461mm x 200mm x 352mm (LxWxD) Weight About 6.5 Kg DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Manufactured under license from Dolby Laboratories.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888.
Ein wichtiger Punkt beim Kauf des Geräts Palsonic LCD TV COMBO (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Palsonic LCD TV COMBO noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Palsonic LCD TV COMBO - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Palsonic LCD TV COMBO reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Palsonic LCD TV COMBO erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Palsonic LCD TV COMBO besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Palsonic LCD TV COMBO verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Palsonic LCD TV COMBO. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Palsonic LCD TV COMBO gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
