Benutzeranleitung / Produktwartung DVD3000 des Produzenten Palsonic
Zur Seite of 24
DIGITAL VIDEO DISC PLAYER MODEL: DVD3000 DVD / VIDEO CD / AUDIO CD PLAYER USER MANUAL DIGITAL VIDEO DIGITAL AUDIO DIGITAL PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 PALSONIC CORPORATI.
Catalogue Importont Safetyinformation ............................................................................2 Precautions ........................................................................................................5 Features ........
SAFETY PRECAUTIONS THIS LIGHTING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
Important Safety Instruction CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THE USER’S MANUAL AND THOSE MARRED ON THE UNIT. RETAIN THE BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety.
7. Power-Cord Protection Power -supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
15. Disc Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction.
l Precautions Please read this precautions before operating this player. n Power cord protection To avoid any malfunction of the unit, and to avoid electric shock, fire or personal injury, please observe the following. l Hold the plug firmly when connecting or disconnecting the AC power cord.
Dear customers: Thank you for your purchasing of this DVD Player produced . We strongly suggest you carefully read the Operating Instructions and take special note to the precautions listed below before enjoying it. l Features DVD: a completely new dimension in video entertainment.
l Remote control unit E. Enjoy the disc content......, you can press the remote key listed below to help enjoying freely: II (1)press key (pause): to pause the playing, II press key again, the player will work again. (2)press the key VOL(+),(-) in remote control unit will change the DVD audio output level.
l Front panel and back panel DVD 3000 2 4 6 7 6 13 10 9 15 (1) POWER SWITCH (2) MIC 1 JACK (3) MIC VOL LEVEL (4) MIC 2 JACK (5) MIC ECHO LEVEL (6) VFD (7) DISC TRAY (8) OPEN/CLOSE (9) PLAY (10) PAUSE (11) PREVIEW (12) NEXT (13) STOP (14) FAST REVERSE (15) FAST FORWARD (1) ELECTRICAL SPDIF OUTPUT (7) Dolby 5.
l Front panel display The figure above shows the front panel with the all displays on. (l)Illuminates when a DVD disc loaded (2)Illuminates when a VCD or CD disc loaded (3)Illuminates during a menu pl.
Basic connection Set the power switches on the player and equipment to be connected to OFF beforeconnecting. l Read through the instruction for the equipment to be connected. l Be sure that the colors of the connectors and plugs match up when connecting the cord.
l Remote control preparation Use batteries size #7 Battery installation: Insert the batteries while observing the correct Notes: (+) and (-) polarities as illustrated below. Service life of batteries: The batteries depend on how often and for what operations the remote control unit is used.
the TV input. Switch on the stereo system’s power if the player has been connected to a stereo system. Standby status: Press the power switch key in the remote control unit, the DVD player will enter into its standby status, press the key again, the player will work normally.
*Note: During playing, the functions may differ depending on discs. Pause Press the “PAUSE” button ( or the " key in the remote control unit) during play. Normal play is resumed when the " " (confirm /play) key or the " key in the remote control unit is pressed.
CHAPTER REPEAT ON TITLE REPEAT ON REPEAT OFF To return to normal play Repeat of chapter being played Repeat of title being played Cancel repeat Press “repeat” key several times until “REPEAT OFF” displayed in the unit’s display.
3. Adjust the microphone volume. 4. Adjust the echo level (if necessary). Note: If you hear strange noises (squealing or howling) while using the KARAOKE feature, move the microphone away from the speakers. Turning down the microphone volume or the speaker volume is also effective.
General page Dolby Digital Settings GENERAL PAGE TV DISPLAY NORMAL/LB WIDE TV TYPE MULTI* NTSC PAL ANGLE MARK OFF OSD LANG ENGLISH CHINESE* AUDIO OUTPUT CAPTIONS ON OFF* SCREEN SAVER OFF Speaker Set u.
Note: (1) When connecting 5. lch, center speaker, rear speaker and subwoofer speaker is in on status. (2)For changeable of software, there may appear some menu display different from exact function above, but it is not affect function of the player. SET UP 1.
Mode Press "MODE" key to select play with left sound track, right sound track or stereo sound and so on. This mode satisfies to realize bilingual function. Catalogue menu This function is effective only in STOP status Press the "MENU" key, then press the number key according to the needed function.
Program Programming play PBC OFF status. Press "PROGRAM" key in the stop mode, the "Programming" will be displayed in the screen. Continuously press the number key to select the program you wanted.
Audio output control Press the "VOL(+)", "VOL(-)" to control the audio output level in 16 steps. Note: If you hear strange noises (squealing or howling) ----Move the microphone away from the speakers. ----Turning down the TV volume or Audio amplifier volume.
Troubleshooting Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom(Common) Remedy No power Insert the power plug securely into the power outlet.
General Specifications POWER SUPPLY AC 110-240V, 50/60Hz POWER CONSUMPTION: 30W TV SYSTEM: WEIGHT: 430mm x 300mm x 92mm (except jut) ENVIRNMENTAL SECTION TEMPERATURE: HUMIDITY: 5~80% (condition of no jew) Discs playback: (1) DVD (2) SUPER VCD (3) VCD AND AUDIO CD S-VIDEO output Y output: C output: VIDEO output: Horizontal definition 1.
Ein wichtiger Punkt beim Kauf des Geräts Palsonic DVD3000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Palsonic DVD3000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Palsonic DVD3000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Palsonic DVD3000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Palsonic DVD3000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Palsonic DVD3000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Palsonic DVD3000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Palsonic DVD3000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Palsonic DVD3000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
