Benutzeranleitung / Produktwartung M5200 Series des Produzenten Oricom
Zur Seite of 44
Oricom M5200 Series Cor dless phone with integrated answering system DO NO T USE ST AND ARD/ALKALINE BA TTERIES IN THIS PR ODUCT , AS THERE IS A RISK OF EXPLOSION AND/OR INJUR Y . USE ONL Y Ni-MH RECHARGEABLE BA TTERIES AS SPECIFICED IN THIS USER GUIDE.
If you f eel this product is not w orking correctly please consult the user guide and en- sure that you are using the product in accordance with the instructions. Remov e all e xtra telephone equipment and connect only this telephone directly to the telephone sock et.
1 CONTENTS CONTENTS W ARNINGS AND SAFETY INFORMA TION ………………………………… 4 Basic Operation ………………………………………………………………… 11 During st.
CONTENTS 2 LNR Function (Last Number Redial) ………………………………………… 18 Redial the last number ……………… 18 Store the last number dialled ……… 19 Delete last num.
3 CONTENTS Answering Machine Operation ……………………………………………… 28 Answering machine On / Off ……… 28 Day/Time setting ……………………… 28 Answering machi.
W ARNINGS AND SAFETY INFORMA TION 4 A void e xposure of this telephone to moisture or liquid. T o prev ent electric shock, do not open the handset or base cabinet. A void metallic contact (e .g. metal clips, ke ys) between the battery contacts and charging conductors.
5 GETTING ST ARTED Getting Star ted Installation and Charger 1 . Connect the mains adaptor (supplied) to the sock et on the back of the base unit and to the wall mains supply . 2 . Connect the telephone cord to the phone sock et on the back of the base unit and into the wall phone soc ket.
GETTING ST ARTED 6 P ac k contents Depending on the model you ha v e purchased this pack should contain the f ollowing items: If any of these are missing, please contact Oricom directly .
7 GETTING ST ARTED 1. T alk 2. Left / Recall 3. Menu 4. Phonebook 5. Right / CID (Caller ID) / Handsfree 6. Intercom 7. Delete / Mute 8. Numeric keys 9. / Ringer Off (On) 10. Ring er Melody / Ringer V olume / Receiver V olume 11. # / K eypad loc k 12.
GETTING ST ARTED 8 Left Arro w / Phonebook records are being revie wed Battery level (3 bars full y charged) Ringer is turned off Speakerphone on Ke ypad lock Connected to telephone line.
9 GETTING ST ARTED 1. Battery charge/Call Light 2. Message Full Light 3. Play/P ause Play MEMO/ICM Message; Pause playbac k. 4. Message/Po wer Light 5. Rewind/OGM(ANS) Recording/Play OGM, Repeat Message , Press twice for Skip to pre vious Message 6. Time Set Day , Hour , Minute 7.
GETTING ST ARTED 10 2-9/GS (Answering Machine Rings) Bottom CODE (Answering Machine PIN).
11 BASIC OPERA TION Basic Operation During standby Cordless handset's LCD displa y HANDSET 1 : Handset number : Current battery lev el : A constant signal icon indicates the cordless handset is linked to the base unit. When signal icon is flashing the handset needs to be re-registered (see page 25) .
BASIC OPERA TION 12 Making an external call With cordless handset Normal dialling 1 . Press key . 2 . Enter a telephone number . If you enter more than 14 digits , you only see the last 14 digits on the displa y . 3 . Press ke y to end the call. Pre-dialling 1 .
13 BASIC OPERA TION Recall feature Recall f eature can be used when you are using some services provided by y our network operators such as “call waiting”, etc. A subscription may apply f or these ser vices, contact y our network operator f or more inf ormation.
BASIC OPERA TION 14 Recall function when connected to a P ABX If you ha v e connected your telephone to a P ABX, you can use all the f acilities such as call transf er , automatic recall, etc.
15 BASIC OPERA TION V olume adjustment (with base unit) Speaker v olume control During speakerphone mode, 1 . Press or ke y to adjust the Speak er volume le vel: Step 1(lo west) to Step 8 (hightest). 2 . The unit automatically retur ns to the pre vious talking mode 2 seconds after pressing the last ke y .
CALLER ID OPERA TION 16 If you subscribe to your telephone oper ators service (charges may apply), numbers of the incoming calls will be displa yed on the screen and stored in the call log (please consult your telephone service provider f or details).
17 CALLER ID OPERA TION 4 . Press the numeric keys to edit the Phone n umber . 5 . Press k e y to confirm. The record is now sa v ed into the phonebook. Then it goes bac k to the call log. Delete one or all CID record(s) Delete one CID record While you are vie wing the CID record that y ou wish to delete, 1 .
LNR FUNCTION 18 This function in only av ailab le f or handset. Redial the last number Y our cordless handset stores the last 3 external numbers dialled, up to 25 digits per number . If the number e xceeds 25 digits, the first 25 digits will be stored to memory .
19 LNR FUNCTION Store the last number dialled While you are vie wing a pre viously dialled number that y ou wish to sav e , 1 . Press ke y . The display on the right is shown. 2 . Press the numeric ke ys to enter the Name . If you made a mistake , press X ke y to edit it.
PHONEBOOK 20 Phonebook This function in only av ailab le f or handset. Add ne w recor ds Y ou can store up to 50 phonebook records in each handset. Each record can contain up to 25 digits per number and 14 characters per name . During standby mode, 1 .
21 PHONEBOOK While you are vie wing the record that y ou wish to edit, 1 . Press and hold k ey . The displa y on the right is shown. 2 . Press X ke y to erase the last char acter , or press and hold X ke y to erase the entire characters . 3 . Press k e y to complete editing the Name and proceed to edit the Number .
CORDLESS HANDSET OPERA TION 22 Cor dless Handset Operation Handset ringer melody During standby mode, 1 . Press and hold key . flashes and the current melody option appears. 2 . Press or key to select the melody option (1 to 9 f or adjustment) . 3 . Press ke y to confirm.
23 CORDLESS HANDSET OPERA TION Multi-handset Operation Y our M5200 series phone can have up to 4 handsets registered to the base unit. Each handset has its own number HS-1, HS-2, HS-3 and HS-4 sho wn on the left-hand side of the displa y .
CORDLESS HANDSET OPERA TION 24 Call transfer between cor dless handsets When there is an incoming e xternal call, 1 . Press INT ke y . The display on the right is shown. 2 . K ey the handset n umber (1, 2, 3, or 4) you wish to transf er . 3 . Press ke y to e xit Intercom mode and return to standby mode.
25 CORDLESS HANDSET OPERA TION Cordless handset ke ypad loc k During standby mode, 1 . Press and hold ke y to loc k the ke ypad. 2 . T o release ke ypad lock, press and hold ke y f or 3 seconds. Note : When the keypad is loc ked, ke y and INT ke y can be used to ans wer an e xternal or intercom call.
CORDLESS HANDSET OPERA TION 26 REMOVE HS PIN ? REMOVE HS ? Language setting T o select the displa y language, 1 . Press ke y during standby mode. 2 . Press or key to select “ LANGU A GE ” from the display . 3 . Press ke y to enter the mode. 4 . Press or key to select Language options on the displa y .
27 CORDLESS HANDSET OPERA TION Reset During standby mode, 1 . Press key . 2 . Press or key to select “ RESET ” from the displa y . 3 . Press ke y to enter the mode. The displa y on the right is shown. 4 . Press the numeric keys to enter the PIN. 5 .
ANSWERING MA CHINE OPERA TION 28 Answering mac hine On / Off During standby mode, 1 . Press and hold k ey to s witch the answering machine off . “ Answering off ” will be heard follow ed by tw o shor t beeps. Note: During Off mode, the ans wering machine is set to Announcement T wo mode automatically .
29 ANSWERING MA CHINE OPERA TION Answering mac hine Ring dela y Setting This setting is used to set the ring times. Def ault number of ring -3 1 . Press and hold 2-9/GS key (bottom of base) f or 2 seconds. “ Set rings ” will be heard f ollow ed by a short beep, after a pause then prompt current rings.
ANSWERING MA CHINE OPERA TION 30 OGM (Outgoing Messages) M5200 has two OGM message modes: OGM1 (Announcement One) mode: Callers can hear a pre-recorded message “ Please leave a message after the beep ” and the unit records the caller's message.
31 ANSWERING MA CHINE OPERA TION Play OGM During standby mode, 1 . Press ANS ke y to pla y the OGM. 2 . Press ke y to stop pla ying and return to standby mode. Delete OGM During OGM playing mode , 1 . Press X key to delete the OGM. 2 . The machine will retur n to standby mode after 5 seconds .
ANSWERING MA CHINE OPERA TION 32 ICM (Incoming Messages) Record ICM During OGM 1 mode, the machine can record callers’ messages. During recording mode, the light will flash. The machine will stop automatically after recording 2 minutes. Or you can stop recording b y pressing key .
33 ANSWERING MA CHINE OPERA TION Memo Record memo Y ou can record memos for other users of the unit to hear . The maximum recording time is 2 minutes. During standby mode, 1 . Press and hold MEMO ke y until y ou hear a long beep . 2 . Speak into the microphone after the beep.
ANSWERING MA CHINE OPERA TION 34 Delete all messages While you are listening to a message , 1 . Press and hold X k e y . The voice prompt, “ all message deleted ” can be heard f ollowed b y a long beep .
35 AD V ANCED ANSWERING SYSTEM Remote control Y ou can access your ans wering machine when you are a w a y by using an y touch tone phone. Y ou hav e to enter the Security PIN to access the answ ering machine. The def ault PIN is 321 (Refer to “Answering mac hine PIN Number Setting” on P29) .
AD V ANCED ANSWERING SYSTEM 36 Remote operation keys Keys on remote phone ke ypad Operation 1 Replay the current message 1(1) Skip back to the pre vious message 2 Play ne w messages /P ause during pla.
37 AD V ANCED ANSWERING SYSTEM T oll saver T oll sav er option is useful when using the remote access f eature. Y ou can see whether there are new messages or not in y our ans wering machine from a remote location. If your ans w ering machine r ings 5 times bef ore ans wering your call, it means there are NO new messages .
APPENDIX 38 Problem P ossible cause(s) Solution(s) No dial tone on the cordless handset. 1. The base unit is not proper ly connected. 2. T oo far from the base unit. 3. Battery charge is low . 4. Incorrect battery polarity . 5. Re-register handset (see P age 25).
39 APPENDIX Problem P ossible cause(s) Solution(s) Phone does not ring when a call comes in. 1. The r inger is off. 2. T oo many phones are sharing the same phone line. 3. Base unit not plugged in. 1. T ur n ON the ringer . 2. REMOVE some of the phones from the phone line.
APPENDIX 40 Phone – Oricom M5200 Specifications Frequency range 1.88-1.897 GHz (bandwidth=20MHz) Channel bandwidth 1.728 MH Operating range Up to 300m outdoors, up to 50m indoors Standby time Up to.
41 APPENDIX W arranty Information (a) W arranty . Oricom warrants that the product is free from def ects in materials and workmanship f or a period of 12 months effectiv e from the date of purchase. This warranty in no wa y aff ects y our statutor y warr anty under the T rade Practices Act 1974 or any other similar legislation.
Customer Support Australia Email: support@or icom.com.au W eb: www .oricom.com.au F ax: (02) 4574 8888 Ph: 1300 889 785 Customer Suppor t T o view the full Oricom range , please visit the Oricom website: www .
Ein wichtiger Punkt beim Kauf des Geräts Oricom M5200 Series (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Oricom M5200 Series noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Oricom M5200 Series - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Oricom M5200 Series reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Oricom M5200 Series erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Oricom M5200 Series besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Oricom M5200 Series verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Oricom M5200 Series. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Oricom M5200 Series gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.