Benutzeranleitung / Produktwartung 8000 des Produzenten Oricom
Zur Seite of 44
USER GUIDE Keep this user guide for future reference. Slim Series Slim8800 DECT Digital Cordless Telephone with Answering System Slim8000 DECT Digital Cordless Telephone.
1 CONTENTS Contents Getting started 4 Important 4 Location 5 Handset range 5 Signal strength 5 Installation and Charger 5 Select your Country 5 Battery low warning 6 Battery performance 6 Pack content.
2 CONTENTS T o store an entry 17 Entering names 17 Character map 18 Enter a pause 18 T o view an entry 18 T o edit an entry 19 T o delete an entry 19 T o delete all entries 19 T o copy the phonebook t.
3 CONTENTS T o Reset your Phone 29 Auto pre x 29 T o set Country 30 T o turn intrusion on 30 Registration 31 Register new handsets on the Slim base 31 T o register a handset 31 T o unregister a han.
4 GETTING ST ARTED Important • Avoid exposure of this telephone to moisture or liquid. • T o prevent electric shock, do not open the handset or base cabinet. • Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and charging conductors.
5 GETTING ST ARTED Location Y ou need to place your Slim base within 2 metres of the mains power socket and telephone socket so that the cables will reach. Make sure it is at least 1 metre a way from other electrical appliances to avoid interference. Y our unit works by sending radio signals between the handset and base.
6 GETTING ST ARTED Batter y lo w warning If the icon ashes in the display, you will need to recharge the handset before you can use it again. During charging, the icon in the display will scroll. Batter y performance In ideal conditions, fully charged ba tteries should give about 10 hours talk time or 100 hours standby time on a single charge.
7 GETTING ST ARTED P ack contents Depending on the model you have purchased this pack should contain the following items: If any of these are missing, please contact Oricom directly .
8 GETTING ST ARTED W all mounting IMPORT ANT Before you wall-mount your Slim, check that you are not drilling into any hidden wiring. Before you drill, make sure the power and telephone line cables will reach the sockets. Method A. T o t the wall bracket (supplied) to an existing telephone wall plate with modular connector simply; 1.
9 GETTING TO KNOW YOUR PHONE Overview of the Handset Earpiece Menu / OK Use to access and select the options in the menu Call log / Scroll Up / Volume up Call Log and shortcut to Ans wer Machine menu .
10 GETTING TO KNOW YOUR PHONE Handset display Handset Battery Level Displays the current power levels of your handset battery . In Use Displayed when the line is in use and ashes when there is an incoming call. Missed Calls Displayed when you have missed calls and new number(s) in the Calls list.
11 Overview of the base Navigating the menu The basic steps of navigating through the menu and on-screen options. 1. From the standby screen, press [ ]. The main menu is opened. 2. Use the [ ] or [ ] keys to scroll through the menu. 3. Soft key options OK and are displayed.
12 GETTING TO KNOW YOUR PHONE PHONEBOOK NEW ENTRY LIST ENTRY ¬ <NAME> ¬ EDIT ENTRY ¬ DELETE ENTRY DELETE ALL DIRECT MEM CLOCK/ALARM DA TE & TIME SET ALARM ¬ OFF ¬ ON ONCE ¬ ON DAIL Y A.
13 USING THE PHONE Using the phone T o Make a call 1. Press [ ]. 2. Dial the telephone number . T o Make a call by Pre-dialling 1. Enter the phone number (maximum 24 digits). If you make a mistake press [ ]. 2. Press [ ]to dial the phone number entered.
14 USING THE PHONE TIP If Auto Pick up mode is on, simply lift up the handset from its base to answer the call. The default setting is On. If you have changed Auto Pick up mode to Off, you will need to press [ ] to answer a call. NOTE An incoming call has priority over other events.
15 USING THE PHONE Multi-handset Operation Y our Slim can have up to 5 handsets registered to the base unit. Each handset has its own number HS-1, HS-2, HS-3, HS-4 and HS-5 shown on the left-hand side of the display .
16 USING THE PHONE 4. Press [ ]to switch between both callers. 5. Press [ ] to hang up. T o make a three way conference call 1. During an external call, press [ ]. Y our caller is put on hold. 2. Enter the number of the handset you want to call or press [ ] to ring all handsets.
17 PHONEBOOK Phonebook The Slim handset phonebook can store up to 100 names and numbers. NOTE Numbers can be up to 24 digits long and names up to 12 characters long. Entries are stored in alphabetical order . T o view and dial phonebook entries 1. Press [ ].
18 PHONEBOOK Character map Key characters and symbols Space 1 - < > * A B C 2 D E F 3 G H I 4 J K L 5 M N O 6 P Q R S 7 T U V 8 ? W X Y Z 9 0 - / # + Enter a pause If your Slim is connected to a switchboard, you may need to enter a pause in a stored number .
19 PHONEBOOK T o edit an entry 1. Press [ ]. 2. Scroll [ ] or [ ] to the entry you want to edit and press [ ]. EDIT ENTRY is displayed. Press [ ] again. 3. Edit the name and press [ ] to con rm. Use [ ] to delete characters. 4. Press [ ] and edit the number .
20 PHONEBOOK T o store a phonebook entry as a speed dial number The keys [ ] to [ ] enable one touch speed dialling of entries stored in the phonebook. 1. Press [ ] twice. 2. Scroll [ ] or [ ] to DIRECT MEM and press [ ] . 3. Press [ ] or [ ] to select KEY 1 - 9 and press [ ].
21 CALLER ID Caller ID If you subscribe to your telephone operators service (charges may apply), numbers of the incoming calls will be displayed on the screen and stored in the call log (please consult your telephone service provider for details).
22 CALLER ID T o save a number from the calls list to the phonebook 1. Scroll [ ] to enter the CALL LOG option menu, then press [ ] to enter CALL LIST . The most recent call is displayed. 2. Scroll [ ] or [ ] to the number you want. 3. Press [ ]. SAVE NUMBER is displayed.
23 CALLER ID T o view and dial a number in the redial list 1. Press [ ] . The last number dialled is displayed. If required, scroll [ ] or [ ] to display the number you want. 2. Press [ ] to dial the number . T o copy a redial number to the phonebook 1.
24 CLOCK & ALARM Clock & Alarm If you subscribe to your network’ s Caller ID service, the time on the unit may be set automatically each time you receive a call, depending on your network provider . Y ou can also set or adjust the time manually using the Clock & Alarm menu.
25 PERSONAL SETTINGS P ersonal settings T o set the ring volume 1. Press [ ], scroll [ ] or [ ] to PERSONAL SET and press [ ]. 2. HANDSET TONE is displayed. Press [ ]. 3. RING VOLUME is displayed. Press [ ]. 4. Scroll [ ] or [ ] to adjust the ringer volume level.
26 PERSONAL SETTINGS T o set the Key tones on/off When you press a key on the handset you hear a beep. Y ou can switch these beeps on or off. 1. Press [ ], scroll [ ] or [ ] to PERSONAL SET and press [ ]. 2. HANDSET TONE is displayed. Press [ ] and scroll [ ] or [ ] to KEY TONE .
27 PERSONAL SETTINGS T o set babysit mode on Leave one handset in a room and use another handset to hear sounds in that room. 1. Press [ ], scroll [ ] or [ ] to PERSONAL SET and press [ ]. 2. Scroll [ ] or [ ] to BABYSIT MODE. Press [ ]. 3. Press [ ] or [ ] to select ON or OFF .
28 ADV ANCED SETTINGS Advanced settings This setting is useful to access certain network and PBX/ switchboard services. T o set the Recall time Y ou can use the Recall button on your telephone when using your network operator’ s ser vices such as call waiting etc.
29 ADV ANCED SETTINGS T o set a number to be barred 1. Follow the above procedures to enter the CALL BARRING menu. 2. Scroll [ ] or [ ] to NUMBER . Press [ ]. 3. If necessary , scroll [ ] or [ ] to the next available slot. 4. Press [ ] and enter the number or pre x you want to bar .
30 ADV ANCED SETTINGS 6. Enter the number you (up to 10 digits) want it replaced with and press [ ]. 7. Press [ ] to return to standby . NOTE If you do not enter a number for “Detect Digit” then the “Pre x number” will be dialled prior to the number you call, (useful for access to “lo-cost” telephone service access).
31 REGISTRA TION Registration Register new handsets on the Slim base The handsets which come in the same pack are already registered to the base. If you buy new handsets, you need to register them before use. 1. Charge the batteries (for 15 hours). 2.
32 USING THE ANSWERING SYSTEM (Slim8800 ONL Y) Using the Ans wering system (Slim8800 ONL Y) Y our answering machine records unanswered calls when it is activated. It can store up to 59 messages within the maximum recording time of 12 minutes. Each messa ge can be up to 3 minutes long.
33 USING THE ANSWERING SYSTEM (Slim8800 ONL Y) T o record an outgoing message 1. Press [ ] scroll to ANSW MACHINE and press [ ]. 2. Scroll [ ] or [ ] to ANSWER MODE and press [ ]. 3. Scroll [ ] or [ ] to select ANSWER & REC or ANSWER ONL Y and press [ ].
34 USING THE ANSWERING SYSTEM (Slim8800 ONL Y) New Message When you have received a new message the will ash on the handset screen and the amount of messages will be shown on the base unit’ s display . T o play messages On the handset 1. Press [ ] and scroll [ ] or [ ] to ANSW MACHINE and press [ ].
35 USING THE ANSWERING SYSTEM (Slim8800 ONL Y) 3. Speak your messa ge. Press [ ] to end recording. Remote access Remote access allows you to operate your answering machine and listen to your messages by calling your phone from another phone. The default setting is on.
36 USING THE ANSWERING SYSTEM (Slim8800 ONL Y) 4. Scroll [ ] or [ ] to select ON or OFF . 5. Press [ ] to con rm. T o access the answering machine menu via the Calls list When the is ashing to indicate new messa ges you can see caller details via [ ] or press [ ] again to go to ANSW MACHINE to play new messages.
37 APPENDIX Customer Support If you feel this product is not working correctly please consult the user guide and ensure that you are using the product in accordance with the instructions. Remove all extra telephone equipment and connect only this telephone directly to the telephone socket.
38 T roubleshooting Problem Possible cause(s) Solution(s) No dial tone on the cordless handset. 1. The base unit is not properly connected. 2. T oo far from the base unit. 3. Battery charge is low. 4. Incorrect battery polarity . 5. Re-register handset.
39 APPENDIX Problem Possible cause(s) Solution(s) Bad audio quality (crackles,echo, etc.). 1. Interference from nearby electrical appliance. 2. Base unit is installed in a room with thick walls.
40 APPENDIX Problem Possible cause(s) Solution(s) The battery icon is not scrolling when the handset is placed on the base. 1. Bad ba ttery contact. 2. Dirty contact. 3. Ba ttery is fully charged 1. Move the handset slightly. 2. Clean the battery contact with a dry cloth.
41 APPENDIX (a) W arranty Oricom warrants that the product is free from defects in materials and workmanship for a period of 12 months effective from the date of purchase. This warranty in no way affects your statutory warranty under the T rade Practices Act 1974 or any other similar legislation.
42 APPENDIX The grant of a T elepermit for any item of terminal equipment indicates only that T elecom has accepted tha t the item complies with the minimum conditions for connection to its network. It indicates no endorsement of the product by T elecom, nor does it provide any sort of warranty .
Australia Oricom International Pty Ltd Locked Bag 658 South Windsor, NSW 2756 Customer Support Email: support@oricom.com.au Web: www.oricom.com.au Phone: 1300 889 785 Fax: (02) 4574 8898 New Zealand Atlas Gentech (NZ) Limited Private Bag 14927 Panmure, Auckland Customer Support Email: support@atlasgentech.
Ein wichtiger Punkt beim Kauf des Geräts Oricom 8000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Oricom 8000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Oricom 8000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Oricom 8000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Oricom 8000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Oricom 8000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Oricom 8000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Oricom 8000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Oricom 8000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
