Benutzeranleitung / Produktwartung 310 des Produzenten Oricom
Zur Seite of 31
DECT Digital Bab y Monitor Secure 310 User Guide.
T ABLE OF CONTENTS.
3 T ABLE OF CONTENTS IMPORT ANT SAFETY INFORMA TION ....................................................... 4 GETTING ST ARTED .................................................................................. 7 ORICOM DIGIT AL BABY MONIT OR .........
4 impOr T ANT SAFETy iNFOrmA TiON impOr T ANT SAFETy iNFOrmA TiON Impor tant Safety Inf ormation • It is very important that you read the User Guide carefully as it contains detailed information you will need to get the most from your Oricom Baby Monitor.
5 impOr T ANT SAFETy iNFOrmA TiON impOr T ANT SAFETy iNFOrmA TiON • The installation location plays an important role in ensuring proper operation. Therefore, maintain a distance of at least one meter from other electronic equipment, such as microwave ovens or hi− devices, otherwise they could cause interference.
6 impOr T ANT SAFETy iNFOrmA TiON • Use only the batteries supplied with the product. Improper use, or use of unapproved batteries may present a risk of re, explosion, or other hazard, and may invalidate any approval or warranty. • If you believe the batteries are damaged, remove product from the charger and stop using the product.
7 impOr T ANT SAFETy iNFOrmA TiON This User Guide pr ovides y ou with all the information y ou need to get the most from y our Oricom Digital Baby Monitor .
8 OriCOm DiGiT AL BABy mONiTOr OriCOm DiGiT AL BABy mONiTOr P arent unit You can loop a lanyard (not supplied) through here. Press to toggle the Parent unit receive volume between on and off. Press to talk to your baby. Steady green indicates that the Baby and Parent units are linked.
9 OriCOm DiGiT AL BABy mONiTOr OriCOm DiGiT AL BABy mONiTOr P arent unit charger Front Back Charging light P ower socket Red when the Parent unit is correctly placed on the charger. For connection to the mains power socket via the power adaptor cable supplied.
10 H D S o u n d Baby unit Press to switch the Nightlight on or off. Press and hold to switch the power on or off. Steady green indicates that the Baby and Parent units are linked. Flashes green if not linked for the rst 30 seconds. Flashes red if not linked for longer than 30 seconds.
11 OriCOm DiGiT AL BABy mONiTOr OriCOm DiGiT AL BABy mONiTOr For connection to the mains power socket via the power adaptor cable supplied. P ower socket Back of Bab y unit.
12 SETTiNG up SETTiNG up P arent unit 1. Plug one of the power adaptor cables into the socket marked on the back of the Parent unit charger and plug the other end into the mains power wall socket and switch the power on. 2. Activate the batteries by pulling the plastic tab away from the back of the Parent unit.
13 SETTiNG up SETTiNG up 3. Place the Parent unit into the charger. The red charging light will illuminate on the charger and the battery icon will start scrolling on the Parent until display to indicate that the batteries are being charged. Leave the batteries to charge for 16 hours to reach maximum charge.
14 Battery performance Rechargeable batteries in the Parent unit will last up to 20 hours in normal use. Please note that new batteries do not reach full capacity until they have been in normal use for several days.
15 Switch on and link the P arent and Bab y units 1. Press and hold the button on the Baby unit for 1 second. The nightlight will briefly illuminate and then the green Link indicator will flash. 2. Press and hold the button on the Parent unit until all the LEDs on the unit briefly illuminate.
16 uSiNG yOur DiGiT AL BABy mONiTOr If the link is broken: • check that the mains power is plugged in and switched on at the Baby unit • check that both units are switched on • check that the ba.
17 uSiNG yOur DiGiT AL BABy mONiTOr Switching on/off Switch the Bab y unit on 1. Press and hold the button for 1 second. The nightlight will briefly illuminate and then the green Link indicator will flash until it links with the Parent unit. Once linked the green Link indicator will remain on.
18 Baby sound le vel LED indicators The seven LEDs across the top of the Parent unit light up to indicate the level of sound being received from the Baby unit. The LEDs light up progressively as the sound increases. LEDs 1-2 light up Green (or Amber if Mute Low is on, see page 18) when sounds of 57dB and 63dB are received.
19 Adjust the P arent unit loudspeaker v olume There are 5 volume levels and off (Mute). The default loudspeaker volume is Level 3. 1. Press or to select the required level.
20 Mute All feature – P arent unit onl y The Mute All feature prevents any sound coming from the Parent unit loudspeaker. With Mute All on you can still monitor your baby using the Baby sound level LED indicators (page 18) and the Crying Alert (below).
21 When Mute Low is switched on, any sounds from the Baby unit to the Parent unit will be muted unless a sound is made above a set level. The set level are sounds that are louder than the rst two green LEDs would register, as described in ‘Baby sound level LED indicators’ on page 18.
22 You will be able to activate Talk Back mode even if other functions have been activated at the Baby unit like Music playback or Nightlight on. Do not press the button when the Baby unit and Parent unit are positioned in the same room.
23 uSiNG yOur DiGiT AL BABy mONiTOr List of tones Your Baby Monitor unit can produce various tones. They have the following meaning: Tone Meaning Single tone Conrmation tone e.g. setting saved. Double tone (fast) Error tone e.g. max volume reached when adjusting volume.
24 Reset the P arent unit 1. Within 3 seconds of the Parent unit being switched on, press and hold the button for at least 10 seconds. The display will show Reset for 2 seconds during the reset and then you will hear a conrmation beep once the reset has been performed.
25 TrOuBLESHOOTiNG uSiNG yOur DiGiT AL BABy mONiTOr Should you experience difficulties operating the SC310 please refer to the troubleshooting guide below. If you still experience difculties please contact Oricom Customer Support on 1300 889 785 for assistance.
26 W ArrANTy TrOuBLESHOOTiNG Battery low on Parent unit − Put the Parent unit back on the charger to charge. − Place Parent unit back on the charger as frequently as possible or ideally leave it on the charger to ensure the batteries remain charged.
27 W ArrANTy TrOuBLESHOOTiNG W arranty Inf ormation (A ustralia) Oricom makes no other warranties or conditions, express or implied, including as to acceptable quality and tness for a particular purpose, except as stated in this Warranty. Any implied warranties that may be imposed by law are limited in duration to the Warranty Period.
28 W ArrANTy W ArrANTy During the Warranty Period, Oricom will where possible repair and if not replace the faulty product or part thereof. All component parts removed under this Warranty become the property of Oricom.
29 W ArrANTy W ArrANTy 4 modication to the product or services carried out on the production by anyone other than Oricom or Oricom's authorised service provider.
.
A ustralia Oricom International Pty Ltd Locked Bag 658 South Windsor, NSW 2756 Australia Email: support@oricom.com.au Phone: 1300 889 785 (Monday to Friday 8am to 6pm AEST) Web: www.
Ein wichtiger Punkt beim Kauf des Geräts Oricom 310 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Oricom 310 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Oricom 310 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Oricom 310 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Oricom 310 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Oricom 310 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Oricom 310 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Oricom 310. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Oricom 310 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
