Benutzeranleitung / Produktwartung SE102 des Produzenten Oregon Scientific
Zur Seite of 28
1 EN EN Heart Rate Monitor with Vibration Alert and Tap On Lens Model: SE102 Heart Rate Monitor with Tap On Lens Model: SE102L USER MANUAL CONTENTS I ntroduction ..................................................................... 3 Key Features ....
2 EN EN EN EN Tap On Lens (TOL – Patent Pending) ........................ 1 1 Heart Rate Limits / Alert ................................................ 12 Target Activity ............................................................. 13 Maximum / Lower / Upper Heart Rate .
EN EN 3 EN EN INTRODUCTION Thank you for selecting the Oregon Scientific TM Heart Rate Monitor * SE102 & SE102L * SE102 = Heart Rate Monitor with Tap on Lens (TOL) and Vibration Alert SE102L = Heart Rate Monitor with Tap on Lens (TOL) (TOL- patent pending) NOTE Please keep this manual handy as you use your new product.
4 EN EN EN EN KEY FEATURES FRONT VIEW 1. Tap on lens screen (patent pending): Tap on it to view a display mode 2. HR: Enter HR mode; toggle heart rate displays 3. MODE: Switch to another display mode 4. ST / SP / +: Start / stop stopwatch; change setting 5.
EN EN 5 EN EN LCD 1. walking / jogging / running activity level 2. : Alarm is set; flashes when alarm is active 3. AM / PM: 12-hour clock 4. / : Upper / lower heart rate limit 5. Time / heart rate 6. / * : Low Battery / Vibration alert battery is low 7.
6 EN EN EN EN 15. CM: Metric height unit (centimeters) 16. YR: Year of user’s birth 17. : Keypad lock is turned on 18. : Tap on lens function is active 19. : Heart rate has exceeded the set limit 20. : Flashes when receiving heart rate signal * for SE102 only GETTING STARTED IMPORTANT To effectively use the watch when exercising i.
EN EN 7 EN EN 2. Strap the chest belt across your chest making sure the belt sits snugly below your pectoral muscles. TIPS • For accurate heart rate readings, make sure the chest belt is placed above your heart. • Avoid areas with dense chest hair.
8 EN EN EN EN • Check the batteries. If they are low the range may be less. NOTE Signal interference in the environment can be due to electromagnetic disturbances.
EN EN 9 EN EN MODE BANNER MAIN MODE USER PROFILE HEART RATE LIMIT CLOCK / ALARM / KEYPAD TONE / TAP ON LENS To set the clock: 1. Press MODE to switch to clock mode. 2. Press and hold SET until the first setting flashes. 3. Press + to change the setting.
10 EN EN EN EN To toggle between the 4 different clock displays: 1. Press MODE to navigate to clock mode. 2. Press SET to scroll through the different screens. ALARM To set the daily alarm: 1. Press MODE to navigate to clock mode. 2. Press SET until you reach the alarm display.
EN EN 1 1 EN EN To turn the alarm sound OFF and reset it for the next day: Press any key. To activate / deactivate the alarm: 1. Press MODE to navigate to clock mode. 2. Press SET until you reach the alarm display. 3. Press + to toggle between alarm on or off.
12 EN EN EN EN To use the tap on lens function: 1. Press MODE to navigate to the clock mode. 2. Press SE T until you reach the tap on lens display and use + to select TOUCH ON . 3. Press and hold SET . 4. Press + to select 1 of the 6 modes and SET to confirm.
EN EN 13 EN EN TARGET ACTIVITY MAXIMUM / LOWER / UPPER HEART RATE Before you begin any exercise program and to achieve maximum health benefits from your workout, it is important to know your: • Max.
14 EN EN EN EN To manually calculate your own heart rate limits: MHR MHR = 220-age LOWER LIMIT MHR x lower target activity %. E.g. Target activity is WALK: Lower limit = MHR x 65% UPPER LIMIT MHR x upper target activity %.
EN EN 15 EN EN USER DATA To access the full benefits of this product, set up your user data before you exercise. This will automatically generate a fitness index, and enable the watch to calculate the level of calories burned when exercising. This information helps you track your progress over time.
16 EN EN EN EN ACTIVITY LEVEL The activity level is based on your own self-assessment of the amount of exercise you regularly perform. ACTIVITY LEVEL DESCRIPTION LITTLE Low - You do not usually participate in programmed recreation sports or exercise.
EN EN 17 EN EN The lungs, heart, blood, circulatory system, and working muscles are all factors in determined VO2 Max. The unit of VO2 Max is ml/kg min.
18 EN EN EN EN STOPWATCH To use the stopwatch: 1. Press MODE to navigate stopwatch mode. 2. To start / stop / resume the stopwatch, press ST / SP . 3. To reset the stopwatch, press and hold SET .
EN EN 19 EN EN Average heart rate and current heart rate Calories burned and current heart rate PERCENTAGE HEART RATE READING The percentage heart rate reading is calculated from your current heart rate and MHR: The higher the percentage, the harder the heart is working.
20 EN EN EN EN NOTE The backlight does not work when the low battery icon is shown and will return to normal once the batteries are replaced. BATTERIES The product uses 2 x CR2032 batteries, one for the watch and another for the chest belt. Both are already installed.
EN EN 21 EN EN To replace the chest belt battery: 1. Using a coin, twist the battery door counter-clockwise until it clicks out of place. 2. Replace the old battery and close the battery door by twisting it clockwise until it is firmly in place. IMPORTANT • Non-rechargeable and rechargeable batteries must be disposed of properly.
22 EN EN EN EN • Batteries are extremely dangerous when swallowed! Therefore, keep batteries and the article away from infants. If a battery has been swallowed seek immediate medical advice. • The batteries supplied must not be recharged, reactivated by any other means, dismantled, put into fire or short-circuited.
EN EN 23 EN EN TRAINING TIPS To gain the maximum benefit from your training program, and to ensure that you exercise safely, please observe the following guidelines: • Start with a well-defined training goal, such as to lose weight, keep fit, improve health or compete in a sporting event.
24 EN EN EN EN the watch and chest belt thoroughly after each training session. Never use the products in hot water or store them when wet. • Do not bend or stretch the transmitter part of the chest belt. • Do not subject the product to excessive force, shock, dust, temperature changes, or humidity.
EN EN 25 EN EN and cleaning of your device. Have your watch serviced by an approved service center annually. • When disposing of this product, do so in accordance with your local waste disposal regulations. • Due to printing limitations, the displays shown in this manual may differ from the actual display.
26 EN EN EN EN When using the watch for aquatic or outdoor sports activities, avoid pressing the keys with wet fingers, under water, or in heavy rain, as this may allow water to gain entry into the electrical circuitry.
EN EN 27 EN EN Water resistant Watch 50 meters (163 feet) not actuating keys Chest belt Splash proof Operating environment Operation temperature 5°C to 40°C (41°F to 104°F) Storage temperature -20°C to 70°C (-4°F to 158°F) * for SE102 only ABOUT OREGON SCIENTIFIC Visit our website (www.
28 EN EN EN EN EU-DECLARATION OF CONFORMITY Hereby, Oregon Scientific, declares that this SmartHeart Heart Rate Monitor (SE102 / SE102L) is in compliance with EMC directive 89/336/CE. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service.
Ein wichtiger Punkt beim Kauf des Geräts Oregon Scientific SE102 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Oregon Scientific SE102 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Oregon Scientific SE102 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Oregon Scientific SE102 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Oregon Scientific SE102 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Oregon Scientific SE102 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Oregon Scientific SE102 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Oregon Scientific SE102. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Oregon Scientific SE102 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
