Benutzeranleitung / Produktwartung DX346 des Produzenten Optoma
Zur Seite of 67
1 English T able of Contents ............................ 1 Usage Notice ................................... 2 Safety Information ...............................2 Precautions .........................................3 Eye Safety Warnings .............
2 English Usage Notice Safety Information The lightning ash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.
3 English Usage Notice Precautions Please follow all warnings, precautions and maintenance as recommended in this user ’s guide. ▀ ■ W arning- Do not look into the projector ’s lens when the lamp is on. The bright light may hurt and damage your eyes.
4 English Usage Notice Do: T urn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
5 English Usage Notice Eye Safety W arnings ▀ ■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀ ■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen.
6 English Introduction Documentation : User ’s Manual W arranty Card Quick Start Card WEEE Card (for EMEA only) Due to different applications in each Country , some regions may have different accessories.
7 English Introduction Product Overview Main Unit Focus Ring 1. Zoom Lever 2. IR Receiver 3. Control Panel 4. Input / Output Connections 5. Kensington 6. TM Lock Port V entilation (inlet) 7. Speaker 8. Lens Cap 9. T ilt-Adjustment Feet 10. V entilation (outlet) 1 1.
8 English Introduction 6 1 2 7 8 11 Source 1. Keystone Correction 2. Enter 3. Re-Sync 4. Help 5. Four Directional Select Keys 6. T emp LED 7. Power 8. On/Standby LED 9.
9 English Introduction USB VGA1-IN/YPbPr/ VIDEO VGA-OUT VGA2-IN/YPbPr HDMI AUDIO1-IN AUDIO-OUT AUDIO2-IN S-VIDEO RS-232C Input/Output Connections Composite Video Input Connector 1. S-Video Input Connector 2. VGA-Out Connector (Monitor Loop-through Output) 3.
10 English Introduction Remote Control The interface is subject to model’s specications. Source 1. Re-Sync 2. Video and S-V ideo 3. HDMI 4. 3D 5. V olume +/- 6. Four Directional Select 7. Keys Menu 8. A V Mute 9. Mute 10. IR LED Indicator 1 1.
11 English Installation Connect to Computer/Notebook Connecting the Projector Due to the difference in applications for each country , some regions may have different accessories. (*) Optional accessory The interface is subject to model’s specications .
12 English Installation Connect to Video Sources 1................................................................................ *Composite V ideo Cable 2.............................................................................................. *S-Video Cable 3.
13 English Installation Powering the Projector On / Off Turn on the projector rst and then select the signal sources. Powering On the Projector 1. Remove th e lens cap. 2. Securely connect the power cord and signal cable. When connected, the ON/ST ANDBY LED will turn Amber .
14 English Installation Contact the nearest service center if the projector displays these symptoms. See pages 64-65 for more information. Powering off the projector 1. Press the “ ” button on the remote control or on the control panel to turn off the projector .
15 English Installation Adjusting the Projected Image Adjusting the Projector ’ s Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector .
16 English Installation Adjusting the Projector ’ s Zoom / Focus Y ou may turn the zoom ring to zoom in or out. T o focus the im - age, rotate the focus ring until the image is clear . SVGA/XGA series: The projector will focus at distances from 3.
17 English Installation This table is for user ’s reference only . SVGA/XGA Diagonal length (inch) size of 4:3 Screen Screen Size W x H Projection Distance (D) Offset (Hd) (m) (inch) (m) (feet) Width Height Width Height wide tele wide tele (m) (inch) 30.
18 English User Controls Control Panel Using the Control Panel POWER Refer to the “Power On/Off the Projector” section on pages 13-14. RE-SYNC Automatically synchronize the projector to the input source. ENTER Conrm your item selection. SOURCE Press “SOURCE” to select an input signal.
19 English User Controls Remote Control Battery Installation Press rmly and slide the 1. battery cover off. Put the cover back. 3. Install new battery into the 2. compartment. Remove the old battery and install new one (CR2025). Ensure that the side with a “+” is facing up.
20 English User Controls The interface is subject to model’s speci - cations. Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 13-14. Source Press “Source” to select an input signal. Re-Sync Automatically synchronizes the projector to the input source.
21 English User Controls Using the HELP button The HELP function ensures easy setup and operation. Press the “?” button on the control panel to open the Help Menu.
22 English User Controls Please refer to the “T roubleshooting” section on pages 47-52 for more details. Help menu button functions only when no input source is detected. If input source is detected and help button is pressed, the following pages will appear to help diagnose any problems.
23 English User Controls.
24 English User Controls The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. T o open the OSD menu, press “Menu” on the Remote Control or Projector Keypad.
25 English User Controls Mai n Menu Sub M enu Di spl ay Mo de Pre se nta tio n / B rig ht / M ov ie / sRGB / Bl a ckbo a rd / Use r / 3D Brigh tness -50~ 50 Contr ast -50~ 50 Sharpnes s 1~15 #1 Color -50~ 50 #1 Tint -50~ 50 Advanced Gamma Film / Video / Gr aphics / Standard Br illi ant Color ™ 1~1 0 Co lo r Te mp.
26 English User Controls Mai n Menu Sub M enu Setting s #7 Se curi ty Se curi ty On / Off Se curi ty T im er Mo nth / Da y / Ho ur C h an g e P a s s w or d ʳ E xi t P r oj ec t or ID 0 ~9 9 Au dio S.
27 English User Controls IMAGE Display Mode There are many factory presets optimized for various types of images. Presentation: Good color and brightness from PC input. Bright: Maximum brightness from PC input. Movie: For home theater . sRGB: Standardised accurate color .
28 English User Controls Sharpness Adjust the sharpness of the image. Press the to decrease the sharpness. Press the to increase the sharpness. Color Adjust a video image from black and white to fully saturated color . Press the to decrease the amount of saturation in the image.
29 English User Controls IMAGE | Advanced Gamma This allows you to choose a degamma table that has been ne-tuned to bring out the best image quality for the input. Film: for home theater . Video: for video or TV source. Graphics: for image source.
30 English User Controls Red/Green/Blue/Cyan/Magenta/Y ellow: Use or to select Hue, Saturation and Gain Colors. White : Use or to select Red, Green and Blue Colors. Reset: Choose “Y es” to return the factory default settings for color adjustments.
31 English User Controls IMAGE | Advanced | Signal (RGB) Automatic Automatically selects the signal. If you use this function, the Phase, frequency items are grayed out, and if Signal is not auto - matic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again.
32 English User Controls DISPLA Y Format Use this function to choose your desired aspect ratio. SVGA/XGA 4:3: This format is for 4×3 input sources. 16:9: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV . Native: This format displays the original image without any scaling.
33 English User Controls Aspect ratio (source detected) Resize image (SVGA) Resize image (XGA) 4:3 800 x 600 center 1024 x 768 center 16:9 800 x 450 center 1024 x 576 center Native No resize image, 1:1 mapping and centered. This format shows the original image without scaling.
34 English User Controls 16:10 Screen 480i/p 576i/p 1080i/p 720p PC 4:3 1066 x 800 center 16:10 1280 x 800 center Native 1:1 mapping centered. 1:1 map - ping (960 x 540) display 1280 x 800 1280 x 720 center 1:1 mapping centered. 16:9 Screen 480i/p 576i/p 1080i/p 720p PC 4:3 960 x 720 center 16:9 1280 x 720 center Native 1:1 mapping centered.
35 English User Controls 3D Mode Off: Select “Of f” to turn 3D settings off for 3D images. DLP Link: Select “DLP Link” to use optimized settings for DLP Link 3D images. 3D -> 2D 3D: Display 3D signal. L (Left): Display the left frame of 3D content.
36 English User Controls SETUP Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press “Enter” to nalize the selection. Projection Front-Desktop This is the default selection.
37 English User Controls Menu Location Choose the menu location on the display screen. Screen T ype Choose the screen type from16:10 or 16:9. Projector ID ID denition can be set up by menu (range 0-99), and allow user control an individual projector by RS232.
38 English User Controls SETUP | Security Security On: Choose “On” to use security verication when turning on the projector . Off: Choose “Of f” to be able to switch on the projector without password verication. Security T imer Use thi s func tio n to set how lon g (Mont h/ Day/Ho ur) the proje ctor ca n be used.
39 English User Controls If the i nco rre ct pas sword is e ntered 3 tim es, th e proje ctor w ill automat ica lly shut dow n. If you have forgotten your password, please contact your local ofce for support.
40 English User Controls SETUP | Audio Settings Internal Speaker Choose the “On” or “Off” to turn on or of f the internal speaker . Mute Choose the “On” to turn mute on. Choose the “Off” to turn mute off. V olume Press the to decrease the volume.
41 English User Controls SETUP | Advanced Logo Pres s to c apture an i mage of t he pic ture cur rent ly displ ayed on sc reen. If c hange s are mad e they will t ake ef fect t he next t ime the pr ojec tor is p owered on. Default: The default startup screen.
42 English User Controls Input Source Use this option to enable / disable input sources. Press to enter the sub menu and select which sources you require. Press “Enter” to finalize the selection. The projector will not search for inputs that are not selected.
43 English User Controls IR Function (*) On: Choose “On”, the projector can be operated by the remote control. When you change the setting from “Off” to “On”, it will display a warning message: Off: Choose “Of f”, you will only be able to use the control panel keys.
44 English User Controls OPTIONS | Advanced Direct Power On Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the “ ” key on the projector control panel or on the remote control.
45 English User Controls OPTIONS | Lamp Settings Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp.
46 English User Controls OPTIONS | Optional Filter Settings Optional Filter Installed Select “Y es” to display warning message after 500 hours of use.
47 English Appendices No image appears on-screen Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure all the pins of connectors are not bent or broken. Check if the projection lamp has been securely installed.
48 English Appendices 7. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. 8. V erify that the resolution setting of the monitor display is lower than or equal to UXGA (1600 × 1200).
49 English Appendices Image is out of focus Make sure the Lens cap is removed. Adjust the Focus Ring on the projector lens. Make sure the projection screen is between the required distance.
50 English Appendices The projector stops responding to all controls If p ossible, turn off the projector , then unplug the power cord and wait at least 60 seconds before reconnecting power . Check that “Keypad Lock” is not activated by trying to control the projector with the remote control.
51 English Appendices Steady light No light LED lighting message Message ON/STANDBY LED Temp-LED Lamp-LED (Green/Amber) (Red) (Red) Standby State (Input power cord) Amber Power on (W arming) Flashing Green Lamp lighting Green Power off (Cooling) Flashing Green Error (Over T emp.
52 English Appendices On Screen Messages T emperature warning: Fan failed: Lamp warning: Out of display range: If the remote control does not work Check the operating angle of the remote control is within ±20° both horizontally and vertically of one of the IR receivers on the projector .
53 English Appendices Replacing the Lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible.
54 English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “ ” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the one screw on the cover .
55 English Appendices Installing and Cleaning the Dust Filter Dust lters are only required/sup - plied in selected regions with ex - cessive dust. Installing the Dust Filter Procedure: Install two lters. 1. T urn on the projector then press “Menu”, go to “OPTIONS -> Op - 2.
56 English Appendices Computer/Video/HDMI/Mac Compatibility Compatibility Modes For widescreen resolution (WXGA), the compatibility support is depen- dent on Notebook/ PC models.
57 English Appendices 3D Input Video Compatibility Input Resolution HDMI 1.4a 3D Input Input T iming 1280 x 720p @ 50Hz T op-and-Bottom 1280 x 720p @ 60Hz T op-and-Bottom 1280 x 720p @ 50Hz Frame pack.
58 English Appendices RS232 Pin Assignments RS232 Commands and Protocol Function List Pin no. Spec. (from projector side) 1 N/A 2 RXD 3 TXD 4 N/A 5 GND 6 N/A 7 N/A 8 N/A 9 N/A 1 2 3 4 5 6 7 8 9.
59 English Appendices RS232 Protocol Function List Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F 1. There is a <CR> after all ASCII commands.
60 English Appendices 2 ---------------------- ------------------------ --------------------------- ---------------------- ------------------------- -------------------------- ------------------------.
61 English Appendices 3 ---------------------- ------------------------ --------------------------- ---------------------- ------------------------- -------------------------- ------------------------.
62 English Appendices 4 READ from projector ---------------------- ------------------------ --------------------------- ---------------------- ------------------------- -------------------------- ----.
63 English Appendices Please note that damage resulting from incorrect installation will void the warranty . Ceiling Mount Installation 1. T o prevent damage to you r projector , please use the Optoma ceiling mount.
64 English Appendices Optoma Global Ofces For service or support please contact your local ofce. USA 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www .optomausa.com services@optoma.com Canada 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www .
65 English Appendices USA 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www .optomausa.com services@optoma.com Canada 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www .optomausa.com services@optoma.com Latin America 3178 Laurelview Ct.
66 English Appendices Regulation & Safety Notices This appendix lists the general notices of your projector . FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules.
67 English Appendices Disposal instructions Do not throw this electronic device into the trash when discarding. T o minimize pollution and ensure utmost protection of the global environment, please recycle it. Operation conditions This device complies with Part 15 of the FCC Rules.
Ein wichtiger Punkt beim Kauf des Geräts Optoma DX346 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Optoma DX346 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Optoma DX346 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Optoma DX346 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Optoma DX346 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Optoma DX346 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Optoma DX346 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Optoma DX346. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Optoma DX346 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
