Benutzeranleitung / Produktwartung Astra (2015) des Produzenten Opel
Zur Seite of 342
OPEL Astra Owner's Manual.
.
Introduction .................................... 2 In brief ............................................ 6 Keys, doors and windows ............ 21 Seats, restraints ........................... 38 Storage ........................................ 60 Instruments and controls .
2 Introduction Introduction.
Introduction 3 Vehicle specific data Please enter your vehicle's data on the previous page to keep it easily accessible. This information is available in the sections "Service and maintenance" and "Technical data" as well as on the identification plate.
4 Introduction Danger, Warnings and Cautions 9 Danger Text marked 9 Danger provides information on risk of fatal injury. Disregarding this information may endanger life. 9 Warning Text marked 9 Warning provides information on risk of accident or injury.
Introduction 5.
6 In brief In brief Initial drive information Vehicle unlocking Press button c to unlock the doors and load compartment. Open the doors by pulling the handles. 5-door hatchback, Sports tourer To open the tailgate, push the touchpad switch below the brand emblem.
In brief 7 3-door hatchback To open the tailgate, push the brand emblem at the bottom half. Press button x on remote control to unlock and open the tailgate. The doors remain locked. 4-door notchback Press button x on the remote control for at least 2 seconds; the boot lid opens slightly.
8 In brief Seat backrests Pull lever, adjust inclination and release lever. Allow the seat to engage audibly. Seat position 3 40, Seat adjustment 3 40, Seat folding 3 43. Seat height Lever pumping motion up = seat higher down = seat lower Seat position 3 40, Seat adjustment 3 40.
In brief 9 Power seat adjustment Operate switch 1 : forwards/back‐ wards = length adjustment upwards/down‐ wards = height adjustment upwards/down‐ wards at front = inclination adjustment Operate switch 2 : forwards/ backwards at the top = backrest adjustment Power seat adjustment 3 44, Seat folding 3 43.
10 In brief Mirror adjustment Interior mirror To reduce dazzle, adjust the lever on the underside of the mirror housing. Interior mirror 3 32, Automatic anti- dazzle interior mirror 3 33. Exterior mirrors Select the relevant exterior mirror and adjust it.
In brief 11 Instrument panel overview.
12 In brief 1 Power windows ..................... 33 2 Exterior mirrors ..................... 31 3 Cruise control ..................... 179 Speed limiter ....................... 181 Adaptive cruise control ....... 182 Forward collision alert .........
In brief 13.
14 In brief Exterior lighting Turn light switch: 7 = lights off 8 = sidelights 9 = low beam Automatic light control AUTO = automatic light control: exterior lighting is switched on and off automatical.
In brief 15 Turn and lane-change signals lever up = right turn signal lever down = left turn signal Turn and lane-change signals 3 144, Parking lights 3 145. Hazard warning flashers Operated with the ¨ button. Hazard warning flashers 3 144. Horn Press j .
16 In brief Washer and wiper systems Windscreen wiper HI = fast LO = slow INT = interval wiping or automatic wiping with rain sensor OFF = off For a single wipe when the windscreen wiper is off, press the lever down to position 1x . Windscreen wiper 3 102, Wiper blade replacement 3 229.
In brief 17 Rear window washer Push lever. Washer fluid is sprayed on the rear window and the wiper wipes a few times. Rear window wiper/washer 3 104. Climate control Heated rear window, heated exterior mirrors The heating is operated by pressing the Ü button.
18 In brief Transmission Manual transmission Reverse: with the vehicle stationary, wait 3 seconds after depressing clutch pedal and then press the release button on the selector lever and engage the gear. If the gear does not engage, set the lever to neutral, release the clutch pedal and depress again; then repeat gear selection.
In brief 19 Starting the engine ■ Turn key to position 1 ■ move the steering wheel slightly to release the steering wheel lock ■ operate clutch and brake ■ automatic transmission in P or N ■.
20 In brief to position P before removing the ignition key. On an uphill slope, turn the front wheels away from the kerb. If the vehicle is on a downhill slope, engage reverse gear or set the selector lever to position P before removing the ignition key.
Keys, doors and windows 21 Keys, doors and windows Keys, locks ................................... 21 Doors ........................................... 26 Vehicle security ............................ 28 Exterior mirrors ............................ 31 Interior mirrors .
22 Keys, doors and windows Radio remote control Used to operate: ■ Central locking system ■ Anti-theft locking system ■ Anti-theft alarm system ■ Power windows ■ Sunroof The radio remote control has a range of approx. 20 metres. It can be restricted by external influences.
Keys, doors and windows 23 Key with foldaway key section Extend the key and open the unit. Replace the battery (battery type CR 2032), paying attention to the installation position. Close the unit and synchronise. Radio remote control synchronisation After replacing the battery, unlock the door with the key in the driver's door lock.
24 Keys, doors and windows Unlocking Press button c . Two settings are selectable: ■ To unlock only the driver's door, load compartment and fuel filler flap, press button c once.
Keys, doors and windows 25 Fault in radio remote control system Unlocking Manually unlock the driver's door by turning the key in the lock. Switch on the ignition and press the central locking button c to unlock the other doors, load compartment and fuel filler flap.
26 Keys, doors and windows 9 Warning Use the child locks whenever children are occupying the rear seats. Using a key or suitable screwdriver, turn the child lock in the rear door to the horizontal position. The door cannot be opened from the inside. To deactivate, turn the child lock to the vertical position.
Keys, doors and windows 27 Pressing button x opens the tailgate even if the doors are locked. Sports tourer After unlocking, push the touchpad switch under the tailgate moulding and open the tailgate.
28 Keys, doors and windows Closing Use one of the interior handles. Do not push the touchpad switch or the emblem whilst closing as this will unlock the tailgate again. Central locking system 3 23. General hints for operating tailgate 9 Danger Do not drive with the tailgate open or ajar, e.
Keys, doors and windows 29 Activating Press e on the radio remote control twice within 15 seconds. Anti-theft alarm system The anti-theft alarm system is combined with the anti-theft locking system. It monitors: ■ Doors, tailgate, bonnet ■ Passenger compartment including adjoining load compartment ■ Vehicle inclination, e.
30 Keys, doors and windows 1. Close tailgate, bonnet, windows and sunroof. 2. Press button o . LED in the button o illuminates for a maximum of 10 minutes. 3. Close doors. 4. Activate the anti-theft alarm system. Status message is displayed in the Driver Information Centre.
Keys, doors and windows 31 If the control indicator d flashes when the ignition is on, there is a fault in the system; the engine cannot be started. Switch off the ignition and repeat the start attempt. If the control indicator continues flashing, attempt to start the engine using the spare key and seek the assistance of a workshop.
32 Keys, doors and windows Electric folding Turn control to 0 , then push the control down. Both exterior mirrors will fold. Push the control down again - both exterior mirrors return to their original position. If an electrically folded mirror is manually extended, pressing down the control will only electrically extend the other mirror.
Keys, doors and windows 33 Automatic anti-dazzle Dazzle from following vehicles at night is automatically reduced. Windows Windscreen Heat-reflecting windscreen The heat-reflecting windscreen has a coating which reflects solar radiation. Also data signals, e.
34 Keys, doors and windows Keep a close watch on the windows when closing them. Ensure that nothing becomes trapped in them as they move. Switch on ignition to operate power windows. Retained power off 3 161. Operate the switch for the respective window by pushing to open or pulling to close.
Keys, doors and windows 35 Press and hold c button to open windows. Press and hold e button to close windows. Release button to stop window movement. If the windows are fully opened or closed, the hazard warning lights will flash twice.
36 Keys, doors and windows A ticket holder is located on the backside of the sun visor. Roof Sunroof 9 Warning Take care when operating the sunroof. Risk of injury, particularly to children. Keep a close watch on the movable parts when operating them.
Keys, doors and windows 37 If the sunroof is raised, it can be opened in one step by pressing p . Sunblind The sunblind is manually operated. Close or open the sunblind by sliding.
38 Seats, restraints Seats, restraints Head restraints ............................ 38 Front seats ................................... 40 Rear seats ................................... 47 Seat belts ..................................... 47 Airbag system .
Seats, restraints 39 Horizontal adjustment To adjust horizontally, pull the head restraint forwards. It engages in several positions. To return to its rearmost position, pull fully forwards and release.
40 Seats, restraints Front seats Seat position 9 Warning Only drive with the seat correctly adjusted. ■ Sit with buttocks as far back against the backrest as possible. Adjust the distance between the seat and the pedals so that legs are slightly angled when pressing the pedals.
Seats, restraints 41 9 Warning Never store any subjects under the seats. Drive only with engaged seats and backrests. Seat positioning Pull handle, slide seat, release handle. Seat backrests Pull lever, adjust inclination and release lever. Allow the backrest to engage audibly.
42 Seats, restraints Seat inclination Lever pumping motion up = front end higher down = front end lower Lumbar support Adjust lumbar support using the four- way switch to suit personal requirements. Moving support up and down: push switch up or down. Increasing and decreasing support: push switch forwards or backwards.
Seats, restraints 43 Side bolster, OPC version Adjust seat width and backrest width using the switches to suit personal requirements. Operate front rocker switch to change seat width.
44 Seats, restraints 9 Danger Move the backrest to an upright position before folding to avoid injury. Seat folding on power seats Lift release lever and fold backrest forwards. The seat slides automatically forwards to the stop. To restore lift backrest to upright position and engage.
Seats, restraints 45 Seat height Move switch upwards/downwards. Seat inclination Move front of switch upwards/ downwards. Seat backrests Turn switch forwards/backwards. Lumbar support Adjust lumbar support using the four- way switch to suit personal requirements.
46 Seats, restraints Adjustable thigh support Pull the lever and slide the thigh support. Overload If the seat setting is electrically overloaded, the power supply is automatically cut-off for a short time. Armrest The armrest can be slid forwards by 10 cm.
Seats, restraints 47 Rear seats Armrest Fold armrest down. The armrest contains cupholders and a storage box. Seat belts The seat belts are locked during heavy acceleration or deceleration of the vehicle holding the occupants in the sitting position. Therefore the risk of injury is considerably reduced.
48 Seats, restraints Seat belt reminder Front seats are equipped with a seat belt reminder, indicated for driver seat as control indicator X in the tachometer 3 113 and for passenger seat in the centre console 3 111. Belt force limiters On the front seats, stress on the body is reduced by the gradual release of the belt during a collision.
Seats, restraints 49 9 Warning The belt must not rest against hard or fragile objects in the pockets of your clothing. Seat belt reminder X 3 113. Height adjustment 1. Pull belt out slightly. 2. Press button. 3. Adjust height and engage. Adjust the height so that the belt lies across the shoulder.
50 Seats, restraints Using the seat belt while pregnant 9 Warning The lap belt must be positioned as low as possible across the pelvis to prevent pressure on the abdomen. Airbag system The airbag system consists of a number of individual systems depending on the scope of equipment.
Seats, restraints 51 Additionally there is a warning label on the side of the instrument panel, visible when the front passenger door is open, or on the front passenger sun visor. The front airbag system is triggered in the event of a front-end impact of a certain severity.
52 Seats, restraints The inflated airbags cushion the impact, thereby reducing the risk of injury to the upper body and pelvis in the event of a side-on collision considerably. 9 Warning Keep the area in which the airbag inflates clear of obstructions.
Seats, restraints 53 The front passenger airbag system can be deactivated via a key- operated switch on the right side of the instrument panel. Use the ignition key to choose the position: * OFF = front passenger airbag is deactivated and will not inflate in the event of a collision.
54 Seats, restraints Change status only when the vehicle is stopped with the ignition off. Status remains until the next change. Control indicator for airbag deactivation 3 113. Child restraints Child restraint systems We recommend the Opel child restraint system which is tailored specifically to the vehicle.
Seats, restraints 55 Ensure that the mounting location of the child restraint system within the vehicle is correct, see following tables. Allow children to enter and exit the vehicle only on the side facing away from the traffic. When the child restraint system is not in use, secure the seat with a seat belt or remove it from the vehicle.
56 Seats, restraints Child restraint installation locations Permissible options for fitting a child restraint system Weight and age class On front passenger seat On rear outboard seats On rear centre seat activated airbag deactivated airbag Group 0: up to 10 kg or approx.
Seats, restraints 57 Permissible options for fitting an ISOFIX child restraint system Weight class Size class Fixture On front passenger seat On rear outboard seats On rear centre seat Group 0: up to 10 kg or approx. 10 months E ISO/R1 X IL X Group 0+: up to 13 kg or approx.
58 Seats, restraints IL = Suitable for particular ISOFIX restraint systems of the 'specific-vehicle', 'restricted' or 'semi-universal' categories. The ISOFIX restraint system must be approved for the specific vehicle type.
Seats, restraints 59 ISOFIX child restraint systems Fasten vehicle-approved ISOFIX child restraint systems to the ISOFIX mounting brackets. Specific vehicle ISOFIX child restraint system positions are marked in the table by IL. ISOFIX mounting brackets are indicated by a label on the backrest.
60 Storage Storage Storage compartments ................ 60 Load compartment ....................... 82 Roof rack system ......................... 97 Loading information ..................... 98 Storage compartments 9 Warning Do not store heavy or sharp objects in the storage compartments.
Storage 61 Depending on the version, cupholders are located under a cover in the centre console. Slide cover backwards. Bottles can be stowed after folding up the intermediate shelf 3 63. Additional cupholders are located in the rear armrest. Fold down the armrest.
62 Storage Underseat storage Press button in the recess and pull out drawer. Maximum load: 3 kg. To close, push in and engage. On version with rear carrier system 3 64, the tyre repair kit is stowed in the drawer. Tyre repair kit 3 265. Armrest storage Storage under the front armrest Press button to fold up the armrest.
Storage 63 Centre console storage Front console The storage container can be used to store small items. Depending on the version, a storage compartment is located under a cover. Slide cover backwards. Press button to remove the frame of the cupholder.
64 Storage Rear carrier system Rear carrier system for two bicycles The rear carrier system (Flex-Fix system) allows bicycles to be attached to a pull-out carrier integrated into the vehicle floor. The transportation of other objects is not permitted.
Storage 65 Completely pull out the rear carrier system until you hear it engage. Ensure that it is not possible to push in the rear carrier system without pulling the release lever again 9 Warning It is only permissible to fit objects to the rear carrier system if the system has been correctly engaged.
66 Storage Check the cable and lamp position to make sure these are correctly installed and are securely located. Lock the rear carrier system Swivel the right clamping lever ( 1 ) first, followed by the left clamping lever ( 2 ), until a resistance is noticeable.
Storage 67 Unfold pedal crank recesses Fold one or both pedal crank recesses upwards until the diagonal support engages. Remove the pedal crank mounts from the pedal crank recesses. Adapting the rear carrier system to a bicycle Press the release lever and withdraw the wheel recesses.
68 Storage Push the release lever on the strap retainer and remove the strap retainer. Prepare the bicycle for attachment Note The maximum width for the pedal crank is 38.3 mm and the maximum depth is 14.4 mm. Rotate the left pedal (without a chain cog) vertically downwards.
Storage 69 Put on the bicycle. The pedal crank here must be placed in the pedal crank recess opening, as shown in the illustration. Caution Make sure that the pedal does not touch the surface of the rear end carrier. Otherwise the crankset might be damaged during the transport.
70 Storage Align the bicycle in the longitudinal direction of the vehicle: Slightly loosen the pedal mount. Place the bicycle upright using the rotary lever on the pedal crank recess.
Storage 71 Removing a bicycle from the rear carrier system Undo strap retainers on both bicycle tyres. Hold on to the bicycle, loosen the attachment screw for the pedal bearing mount, then lift the pedal bearing mount to remove it.
72 Storage Disengage the locking lever on the diagonal support and fold both pedal crank recesses down. 9 Warning Risk of pinching. Swivel first the left clamping lever ( 1 ), followed by the right clamping lever ( 2 ), until they stop. Push the clamping lever down and pull both lamp supports out of the recesses.
Storage 73 Push the release lever up and hold. Lift the system slightly and push it into the bumper until it engages. Release lever must return to original position. 9 Warning If the system cannot be correctly engaged, please seek the assistance of a workshop.
74 Storage Caution Consult your bicycle dealer before attaching bicycles with carbon frames. The bicycles might get damaged. Extending Open the tailgate. 9 Warning No-one should be in the extension zone of the rear carrier system, risk of injury. Pull release lever up.
Storage 75 Fold out tail lamps Fold out both tail lamps. Lock the rear carrier system Swivel both clamping levers sidewards as far as they will go. Otherwise safe functionality is not guaranteed. Fold out wheel recesses Fold out both wheel recesses. Assembling the bicycle rack Lift the rack at the rear ( 1 ) and pull it backwards.
76 Storage Push down the rack ( 1 ) and swivel handle ( 2 ) backwards to engage. Attaching the first bicycle 1. Rotate the pedals into position (as shown in the illustration) and put the bicycle on the foremost wheel recess. Make sure that the bicycle stands centrally on the wheel recesses.
Storage 77 Attaching the adapter When carrying more than two bicycles, the adapter must be fixed before the second bicycle is attached. 1. Apply the adapter to the rear carrier system as shown in the illustration. 2. Turn the lever ( 1 ) forwards and hold, then lower the adapter ( 2 ) at the rear.
78 Storage 3. Position the bicycles on the rear carrier system alternately aligned to the left and to the right. 4. Align the bicycles to the one attached before. The wheel hubs of the bicycles must not touch each other. 5. Attach the bicycles with mounting brackets and strap retainers as described for the first bicycle.
Storage 79 It is recommended to attach a warning sign at the rearmost bicycle to increase visibility. Fold the rear carrier system backwards The rear carrier system can be folded backwards to get access to the load compartment. ■ Without attached adapter: Push the lever ( 1 ) to disengage and hold.
80 Storage 2. Unbutton the strap. 3. Turn the lever ( 1 ) forwards and hold. 4. Lift the adapter ( 2 ) at the rear and remove. Disassembling the bicycle rack Arrange mounting brackets as shown in the illustration. Swivel handle ( 1 ) forwards to disengage and lift the rack ( 2 ).
Storage 81 Stow the strap retainers accurately. Unlock the rear carrier system Swivel both clamping levers inwards as far as they will go. Fold in tail lamps Swivel in both tail lamps. Fold in number plate holder Lift the number plate holder and fold it forwards.
82 Storage Load compartment The rear seat backrest is divided into two parts. Both parts can be folded down. Load compartment extension, 3-door and 5-door hatchback, 4-door notchback ■ Only 3-door and 5-door hatchback: remove the load compartment cover if necessary.
Storage 83 or damage to the load or vehicle in the event of hard braking or a collision. The seat belt of the centre seat could be blocked when the backrest is folded up too quickly. To unlock the retractor, push in the seat belt or pull it out by approx.
84 Storage If the vehicle is to be loaded via a rear door, take the seat belt out of the seat backrest guide and put it behind the retainer (as shown in the illustration). ■ To fold up, raise the backrests and guide them into an upright position until they engage audibly.
Storage 85 Raise the seat cushion and fold the backrest ■ Pull the strap on one or both seat cushions and lift the rear of the cushion forwards. ■ Press and hold the catch to push the head restraints down 3 38. ■ Pull the release lever on one or both sides of the backrests and fold down onto the seat cushion to get a flat load bay.
86 Storage The closed cover can be secured from the side of the load compartment. Turn the knob 90°: knob horizontal = cover secured from the side of the passenger compartment knob vertical = cover not secured Rear storage 3-door hatchback Press both buttons and fold down cover.
Storage 87 Lift cover at the rear and push it upwards at the front. Remove the cover. If the height adjustable cover is mounted in the middle or upper position, the load compartment cover can be stowed below it. Height adjustable cover 3 88. Fitting Engage cover in side guides and fold downwards.
88 Storage Removing cover Open the load compartment cover. Pull the release lever on the right side up and hold it. Lift the cover first on the right side and remove from retainers. The removed cover can be stored under the rear floor cover like shown in the graphic.
Storage 89 Height adjustable cover, 3-door hatchback, 5-door hatchback The height adjustable cover can be mounted in three positions: ■ directly above the rear floor cover ( 1 ), ■ in a middle position ( 2 ) ■ in an upper position ( 3 ). Caution Ensure that the front and rear end of the height adjustable cover are attached to the same level.
90 Storage Note ■ If mounted in position 2 or 3 , the space between the rear floor cover and the height adjustable cover can be used as a stowage compartment. ■ The height adjustable cover can be lifted and hooked in with the strap when it is mounted in position 1 or 2 .
Storage 91 Lashing eyes The lashing eyes are designed to secure items against slippage, e.g. using lashing straps or luggage net. Cargo management system The FlexOrganizer is a flexible system for dividing up the load compartment. The system consists of: ■ adapters, ■ mesh pockets, ■ hooks, ■ service box, ■ strap set.
92 Storage Net pocket Insert adapters into the required position in the rails. The net pocket can be suspended from the adapters. Installation of hooks in the rails Insert the hook in the desired position first in the upper groove of the rail and then press in the lower groove.
Storage 93 Alternatively install both hooks in the lower rail. Plug in the lower brackets of the box from above into the lower hooks. Strap set Insert the adapters of the strap set in a rail. Make sure that the belt is not twisted. The strap set has two locks to open.
94 Storage Behind the front seats Attach strap to eyes underneath the rear seat cushion. Fold backrests forward. To get a flat load bay, first fold seat cushion before attaching the safety net.
Storage 95 Sports tourer Fold down straps. Stow the warning triangle in the space behind the straps on the inside of the tailgate. 4-door notchback Stow the warning triangle in the recess on the left side of the load compartment. First aid kit 5-door hatchback Stow the first aid kit in the stowage compartment behind the warning triangle.
96 Storage 3-door hatchback Stow the first aid kit in the stowage compartment behind the warning triangle. Use the recesses to fold down the cover. Depending on the equipment, the first aid kit can be stored in the rear storage 3 86. Sports tourer Fold down strap.
Storage 97 Roof rack system Roof rack For safety reasons and to avoid damage to the roof, the vehicle approved roof rack system is recommended. For further information contact your workshop. Follow the installation instructions and remove the roof rack when not in use.
98 Storage Loading information ■ Heavy objects in the load compartment should be placed against the seat backrests. Ensure that the backrests are securely engaged. If objects can be stacked, heavier objects should be placed at the bottom. ■ Secure objects with lashing straps attached to the lashing eyes 3 91.
Storage 99 vehicle weight (see identification plate 3 287) and the EC kerb weight. To calculate the payload, enter the data for your vehicle in the Weights table at the front of this manual. The EC kerb weight includes weights for the driver (68 kg), luggage (7 kg) and all fluids (tank 90 % full).
100 Instruments and controls Instruments and controls Controls ..................................... 100 Warning lights, gauges and indi‐ cators ......................................... 108 Information displays ................... 119 Vehicle messages .
Instruments and controls 101 Heated steering wheel Activate heating by pressing * button. Activation is indicated by the LED in the button. The recommended grip areas of the steering wheel are heated quicker and to a higher temperature than the other areas.
102 Instruments and controls Windscreen wiper/washer Windscreen wiper HI = fast LO = slow INT = interval wiping or automatic wiping with rain sensor OFF = off For a single wipe when the windscreen wiper is off, press the lever down to position 1x . Do not use if the windscreen is frozen.
Instruments and controls 103 Adjustable sensitivity of the rain sensor Turn the adjuster wheel to adjust the sensitivity: low sensitivity = turn adjuster wheel downwards high sensitivity = turn adjuster wheel upwards Keep the sensor free from dust, dirt and ice.
104 Instruments and controls Rear window wiper/washer Press the rocker switch to activate the rear window wiper: upper position = continuous operation lower position = intermittent operation middle position = off Push lever. Washer fluid is sprayed onto the rear window and the wiper wipes a few times.
Instruments and controls 105 If outside temperature drops to 3 °C, a warning message is displayed in the Driver Information Centre with Uplevel-Combi-Display. 9 Warning The road surface may already be icy even though the display indicates a few degrees above 0 °C.
106 Instruments and controls Note If RDS Auto Time Adjust is activated, time and date are automatically set by the system. See Infotainment system manual for further information. Set time To adjust the time settings, select the Set Time menu item. Turn the multifunction knob to adjust the first setting.
Instruments and controls 107 A further 12 Volt power outlet is located in the rear console. Fold the cover downwards. Sports tourer: A 12 Volt power outlet is located at the left sidewall in the load compartment. Do not exceed the maximum power consumption of 120 watts.
108 Instruments and controls Warning lights, gauges and indicators Instrument cluster In some versions, the needles of the instruments briefly rotate to the end position when the ignition is switched on. Speedometer Indicates vehicle speed. Odometer The bottom line displays the recorded distance in km.
Instruments and controls 109 Caution If the needle is in the red warning zone, the maximum permitted engine speed is exceeded. Engine at risk. Fuel gauge Displays the fuel level or gas level in the tank depending on the operation mode. Control indicator i illuminates if the level in the tank is low.
110 Instruments and controls Displays the coolant temperature. left area = engine operating temperature not yet reached central area = normal operating temperature right area = temperature too high Caution If engine coolant temperature is too high, stop vehicle, switch off engine.
Instruments and controls 111 code appears in the Driver Information Centre. Have engine oil and filter changed by a workshop within one week or 500 km (whichever occurs first). Driver Information Centre 3 119. Service information 3 284. Control indicators The control indicators described are not present in all vehicles.
112 Instruments and controls Control indicators in the instrument cluster.
Instruments and controls 113 Control indicators in the centre console Turn signal O illuminates or flashes green. Illuminates briefly The parking lights are switched on. Flashes A turn signal or the hazard warning flashers are activated. Rapid flashing: failure of a turn signal light or associated fuse, failure of turn signal light on trailer.
114 Instruments and controls * illuminates yellow. The front passenger airbag is deactivated 3 52. 9 Danger Risk of fatal injury for a child using a child restraint system together with activated front passenger airbag. Risk of fatal injury for an adult person with deactivated front passenger airbag.
Instruments and controls 115 9 Warning Stop. Do not continue your journey. Consult a workshop. Illuminates after the ignition is switched on if the manual parking brake is applied 3 172. Operate pedal - illuminates or flashes yellow. Illuminates Brake pedal needs to be depressed to release the electric parking brake 3 172.
116 Instruments and controls Upshift [ illuminates green as a control indicator, or is shown as a symbol in the Driver Information Centre with Uplevel-Combi-Display, when upshifting is recommended for fuel saving reasons. On some versions, gearshift indication is popped-up as full page in the Driver Information Centre.
Instruments and controls 117 Have the cause of the fault remedied by a workshop. Flashes The system is actively engaged. Engine output may be reduced and the vehicle may be braked automatically to a small degree. Electronic Stability Control 3 175, Traction Control system 3 174.
118 Instruments and controls 3. Move out of the flow of traffic as quickly as possible without impeding other vehicles. 4. Switch off ignition. 9 Warning When the engine is off, considerably more force is needed to brake and steer. During an Autostop the brake servo unit will still be operational.
Instruments and controls 119 Fog light > illuminates green. The front fog lights are on 3 144. Rear fog light r illuminates yellow. The rear fog light is on 3 145. Low washer fluid G illuminates yellow. The washer fluid level is low. Washer fluid 3 227.
120 Instruments and controls ■ trip/fuel information ■ vehicle messages, displayed as code numbers 3 126. In the Uplevel-Combi-Display, menu pages can be selected by pressing the MENU button.
Instruments and controls 121 Vehicle Information Menu Press the MENU button to select the Vehicle Information Menu or, on Uplevel-Combi-Display, select X . Turn the adjuster wheel to select a submenu. Press the SET/CLR button to confirm. Follow the instructions given in the submenus.
122 Instruments and controls Trip/Fuel Information Menu Press the MENU button to select the Trip/Fuel Information Menu , or select W on Uplevel-Combi-Display.
Instruments and controls 123 ■ Top Consumers : List of top comfort consumers currently switched on is displayed in descending order. Fuel saving potential is indicated. A switched off consumer disappears from the list and the consumption value will be updated.
124 Instruments and controls ■ Coolant Temp. : Display of coolant temperature. ■ Battery Volt. : Display of vehicle battery voltage. Graphic-Info-Display, Colour-Info-Display Depending on the vehicle configuration the vehicle has a Graphic- or Colour-Info-Display.
Instruments and controls 125 ■ vehicle messages 3 126 ■ settings for vehicle personalisation 3 132 The type of information and how it is displayed depends on the equipment of the vehicle and the settings made. Selecting menus and settings Menus and settings are accessed via the display.
126 Instruments and controls Vehicle messages Messages are indicated mainly in the Driver Information Centre (DIC), in some cases together with a warning and signal buzzer. Press the SET/CLR button, the MENU button or turn the adjuster wheel to confirm a message.
Instruments and controls 127 No. Vehicle message 26 Left rear turn signal failure 27 Right front turn signal failure 28 Right rear turn signal failure 29 Check trailer brake light 30 Check trailer rev.
128 Instruments and controls No. Vehicle message 134 Park assist fault, clean bumper 136 Service parking assist 145 Check washer fluid level 174 Low vehicle battery 258 Park assist off Vehicle messages on the Uplevel-Combi-Display The vehicle messages are displayed as text.
Instruments and controls 129 ■ If a warning message or a warning code appears in the Driver Information Centre. ■ If the parking assist detects an object. ■ If unintended lane change occurs. ■ If the reverse gear is engaged and the rear end carrier extended.
130 Instruments and controls Trip/Fuel Information Menu on Uplevel-Combi-Display Turn the adjuster wheel to select the submenus: ■ Trip odometer 1 ■ Average consumption 1 ■ Average speed 1 ■ T.
Instruments and controls 131 Trip odometer Trip odometer displays the recorded distance since a certain reset. Trip odometer counts up to a distance of 2,000 km and then restarts at 0. To reset, press the SET/CLR button for a few seconds. Range Range is calculated from current fuel tank content and current consumption.
132 Instruments and controls Vehicle personalisation The vehicle's behaviour can be personalised by changing the settings in the Info-Display. Some of the personal settings for different drivers can be memorised individually for each vehicle key.
Instruments and controls 133 ■ Sport steering : Steering support is reduced. ■ Swap backlight colour main instr. : Changes the instrument illumination colour. Languages Selection of the desired language. Time Date See Clock 3 105. Radio settings See description in the Infotainment system manual for further information.
134 Instruments and controls assist. Activation is selectable with or without attached trailer coupling. Auto collision preparation : Activates or deactivates the automatic brake functionality of the vehicle in the event of imminent collision danger.
Instruments and controls 135 ■ Radio Settings ■ Phone Settings ■ Navigation Settings ■ Display Settings ■ Vehicle Settings In the corresponding submenus the following settings can be changed: Sport Mode Profile ■ Engine Sport Performance : Accelerator pedal and gear change characteristics become more responsive.
136 Instruments and controls ■ Collision Detection Systems Park Assist : Activates or deactivates the ultrasonic sensors. Activation is selectable with or without attached trailer coupling. Automatic Collision Preparation : Activates or deactivates the automatic brake functionality of the vehicle in the event of imminent collision danger.
Lighting 137 Lighting Exterior lighting .......................... 137 Interior lighting ........................... 146 Lighting features ........................ 147 Exterior lighting Light switch Turn light switch: 7 = lights off 8 = sidelights 9 = low beam Control indicator 8 3 118.
138 Lighting In the Driver Information Centre with Uplevel-Combi-Display, the current status of the automatic light control is displayed. When switching on the ignition, automatic light control is active. When low beam is on, 8 illuminates. Control indicator 8 3 118.
Lighting 139 It switches to low beam when: ■ a sensor detects the lights of oncoming or preceding vehicles ■ the vehicle speed is slower than 20 km/h ■ it is foggy or snowy ■ driving in urban areas If there are no restrictions detected, the system switches back to high beam.
140 Lighting Dynamic automatic headlight levelling 3 140. Headlights when driving abroad The asymmetrical headlight beam extends visibility at the edge of the road at the passenger side. However, when driving in countries where traffic drives on the opposite side of the road, adjust the headlights to prevent dazzling of oncoming traffic.
Lighting 141 With the light switch in position AUTO all lighting functions are available. The following functions are available also with light switch in position 9 : ■ Dynamic curve lighting ■ Cornering light ■ Reversing function ■ Dynamic automatic headlight levelling Playstreet lighting Activated automatically at low speed up to approx.
142 Lighting Control indicator f 3 118. Reversing function If the headlights are on and reverse gear is engaged, both corner lights are switched on. They remain illuminated for 20 seconds after disengaging reverse gear or until driving faster than 17 km/h in a forward gear.
Lighting 143 If there are no restrictions detected, the system switches back to high beam. When the system is active, the front camera monitors the area ahead of the vehicle and ensures an optimum light distribution for maximum driver vision during almost all conditions.
144 Lighting Fault in adaptive forward lighting system When the system detects a failure in the Adaptive forward lighting system, the system moves to a preset position to avoid dazzling of oncoming traffic. If this is not possible the affected headlight will be automatically switched off.
Lighting 145 Light switch in position AUTO : switching on front fog lights will switch headlights on automatically. Rear fog lights Operated with the r button. Light switch in position AUTO : switching on rear fog light will switch headlights on automatically.
146 Lighting Interior lighting Instrument panel illumination control Brightness of the following lights can be adjusted when the exterior lights are on: ■ Instrument panel illumination ■ Info-Display ■ Illuminated switches and operation elements.
Lighting 147 Operate rocker switches: centre position = automatic switching on and off. press I = on. press 0 = off. Rear courtesy lights Illuminates in conjunction with the front courtesy light depending on rocker switch position. Press s or t to switch on manually.
148 Lighting Activation or deactivation of this function can be changed in the Settings menu in the Info-Display. Vehicle personalisation 3 132. The settings can be saved for the key being used 3 23.
Lighting 149 ■ Auxiliary heater ■ Heated rear window and mirrors ■ Heated seats ■ Fan In the second stage a message which confirms the activation of the vehicle battery discharge protection will be displayed in the Driver Information Centre.
150 Climate control Climate control Climate control systems ............. 150 Air vents ..................................... 158 Maintenance .........
Climate control 151 Demisting and defrosting ■ Press button V : fan automatically switches to higher speed, the air distribution is directed towards the windscreen. ■ Set temperature control to warmest level. ■ Switch on heated rear window Ü . ■ Open side air vents as required and direct them towards the door windows.
152 Climate control If no cooling or drying is required, switch off the cooling system for fuel saving reasons. Activated cooling may inhibit Autostops. Air recirculation system 4 Press button 4 to activate air recirculation mode. Activation is indicated by the LED in the button.
Climate control 153 Demisting and defrosting the windows V ■ Press button V : fan automatically switches to higher speed, the air distribution is directed towards the windscreen. ■ Set temperature control to warmest level. ■ Switch on heated rear window Ü .
154 Climate control Heated rear window Ü 3 35, Heated seats ß 3 46, Heated steering wheel * 3 101. Each change of settings is shown in the Info-Display for a few seconds. The electronic climate control system is only fully operational when the engine is running.
Climate control 155 If the minimum temperature Lo is set, the climate control system runs at maximum cooling, if cooling n is switched on. If the maximum temperature Hi is set, the climate control system runs at maximum heating.
156 Climate control Manual settings Climate control system settings can be changed by activating the buttons and rotary knobs as follows. Changing a setting will deactivate the Automatic mode. Fan speed Z Press lower button to decrease or upper button to increase fan speed as shown in the illustration.
Climate control 157 Press button n to switch on cooling. Activation is indicated by illumination of the LED in the button. Cooling is only functional when the engine is running and climate control fan is switched on. Press button n again to switch off cooling.
158 Climate control Auxiliary heater Air heater Quickheat is an electric auxiliary air heater which automatically warms up the passenger compartment more quickly. Air vents Adjustable air vents At least one air vent must be open while the cooling is on.
Climate control 159 Maintenance Air intake The air intake in front of the windscreen in the engine compartment must be kept clear to allow air intake. Remove any leaves, dirt or snow. Pollen filter The pollen filter cleans dust, soot, pollen and spores from the air entering the vehicle through the air intake.
160 Driving and operating Driving and operating Driving hints ............................... 160 Starting and operating ............... 161 Engine exhaust .......................... 166 Automatic transmission .............. 167 Manual transmission ..
Driving and operating 161 Starting and operating New vehicle running-in Do not brake unnecessarily hard for the first few journeys. During the first drive, smoke may occur because of wax and oil evaporating off the exhaust system. Park the vehicle in the open for a while after the first drive and avoid inhaling the fumes.
.
Driving and operating 163 Stop-start system The stop-start system helps to save fuel and to reduce the exhaust emissions. When conditions allow, it switches off the engine as soon as the vehicle is at a low speed or at a standstill, e.g. at a traffic light or in a traffic jam.
164 Driving and operating Conditions for an Autostop The stop-start system checks if each of the following conditions is fulfilled: ■ The stop-start system is not manually deactivated ■ the bonnet.
Driving and operating 165 ■ the engine temperature is too low ■ the charging level of the vehicle battery is below a defined level ■ the brake vacuum is not sufficient ■ the vehicle is driven .
166 Driving and operating Engine exhaust 9 Danger Engine exhaust gases contain poisonous carbon monoxide, which is colourless and odourless and could be fatal if inhaled. If exhaust gases enter the interior of the vehicle, open the windows. Have the cause of the fault rectified by a workshop.
Driving and operating 167 Cleaning takes place quickest at high engine speeds and loads. The control indicator % extinguishes as soon as the self-cleaning operation is complete. Catalytic converter The catalytic converter reduces the amount of harmful substances in the exhaust gases.
168 Driving and operating Selector lever P = park position, wheels are locked, engage only when the vehicle is stationary and the parking brake is applied R = reverse gear, engage only when the vehicl.
Driving and operating 169 Manual mode Move selector lever out of position D towards the left and then forwards or backwards. < = Shift to a higher gear. ] = Shift to a lower gear. If a higher gear is selected when vehicle speed is too low, or a lower gear when vehicle speed is too high, the shift is not executed.
170 Driving and operating Only the highest gear is available. Depending on the fault, 2nd gear may also be available in manual mode. Shift only when vehicle is at a standstill.
Driving and operating 171 Manual transmission To engage reverse, with the vehicle stationary wait 3 seconds after depressing the clutch pedal and then press the release button on the selector lever and engage the gear. If the gear does not engage, set the lever to neutral, release the clutch pedal and depress again; then repeat gear selection.
172 Driving and operating ABS starts to regulate brake pressure as soon as a wheel shows a tendency to lock. The vehicle remains steerable, even during hard braking. ABS control is made apparent through a pulse in the brake pedal and the noise of the regulation process.
Driving and operating 173 To reduce the operating forces of the parking brake, depress the foot brake at the same time. Control indicator R 3 114. Electric parking brake Applying when vehicle is stationary 9 Warning Pull switch m for approx. one second, the electric parking brake operates automatically with adequate force.
174 Driving and operating Apply electric parking brake: pull and hold the switch m for more than 5 seconds. If control indicator m illuminates, electric parking brake is applied. Release electric parking brake: push and hold the switch m for more than 2 seconds.
Driving and operating 175 9 Warning Do not let this special safety feature tempt you into taking risks when driving. Adapt speed to the road conditions. Control indicator b 3 116. Deactivation TC can be switched off when spinning of drive wheels is required: press button b briefly to deactivate TC, k illuminates.
176 Driving and operating For a more sporty behaviour ESC and TC can be deactivated separately: ■ press button b briefly: only Traction control system is inactive, ESC remains active, k illuminates ■ hold button b pressed for min. 5 seconds: TC and ESC are deactivated, k and n illuminate.
Driving and operating 177 Interactive driving system Flex Ride Flex Ride driving system allows the driver to select between three driving modes: ■ SPORT mode: press button SPORT , LED illuminates. ■ TOUR mode: press button TOUR , LED illuminates. ■ NORMAL mode: both buttons SPORT and TOUR are not pressed, no LED illuminates.
178 Driving and operating automatically changes the settings within the selected driving mode or, when recognising greater variations, the driving mode is changed for the length of variation. If, for example, NORMAL mode is selected and DMC detects a sporty driving behaviour, DMC changes several settings of the Normal mode into sporty settings.
Driving and operating 179 NORMAL mode In NORMAL mode, when neither SPORT nor OPC button is pressed, all settings of the systems are adapted to standard values. SPORT mode The settings of the systems are adapted to a sportier driving style. OPC mode The drive dynamic characteristics are adapted to high performance settings.
180 Driving and operating Activation Accelerate to the desired speed and turn thumb wheel to SET/- , the current speed is stored and maintained. Control indicator m in instrument cluster illuminates green. Accelerator pedal can be released. Vehicle speed can be increased by depressing the accelerator pedal.
Driving and operating 181 Speed limiter The speed limiter prevents the vehicle exceeding a preset maximum speed. The maximum speed can be set at a speed above 25 km/h. The driver can only accelerate up to the preset speed. Deviations from the limited speed may occur when driving downhill.
182 Driving and operating The limited speed will flash in the Driver Information Centre and, depending on the vehicle, additionally a chime sounds during this period. Release the accelerator pedal and the speed limiter function is reactivated once a speed lower than the limit speed is obtained.
Driving and operating 183 9 Warning The complete driver attention is always required while driving with adaptive cruise control. The driver stays fully in control of the vehicle because the brake pedal, the accelerator pedal and the cancel switch have priority over any adaptive cruise control operation.
184 Driving and operating Increase speed With adaptive cruise control active, hold thumb wheel turned to RES/+ : speed increases continuously in large increments, or activate repeatedly RES/+ : speed increases in small increments. If the vehicle is driven with adaptive cruise control active much faster than the desired speed, e.
Driving and operating 185 The selected following distance is indicated by filled distance bars in the adaptive cruise control page. Note that the following distance setting is shared with the sensitivity setting of forward collision alert.
186 Driving and operating ■ Electronic Stability Control is operating, ■ there is no traffic and nothing detected on the road sides for several minutes.
Driving and operating 187 So if a new vehicle is detected, the system may accelerate instead of braking. ■ Adaptive cruise control does ignore the oncoming traffic. ■ Adaptive cruise control does not brake for stopped vehicles, pedestrians or animals.
188 Driving and operating Hill and trailer considerations System performance on hills and when towing a trailer depends on your vehicle speed, vehicle load, traffic conditions and the road gradient. It may not detect a vehicle in your path while driving on hills.
Driving and operating 189 Vehicle messages 3 126. Forward collision alert The forward collision alert can help to avoid or reduce the harm caused by front-end crashes. A vehicle ahead is indicated by a control indicator A . If a vehicle directly ahead is approached too quickly, a warning chime and alert in the Driver Information Centre is provided.
190 Driving and operating Press button E ; the current setting is shown on the Driver Information Centre. Press button E again to change the alert sensitivity.
Driving and operating 191 Settings Settings can be changed in the Auto collision preparation menu in the vehicle personalisation 3 132. Forward collision alert based on front camera system Forward collision alert uses the front camera system in the windscreen to detect a vehicle directly ahead, in your path, within a distance of approx.
192 Driving and operating Deactivation The system can be deactivated. Press button V repeatedly until the following message appears in the Driver Information Centre. General information for both variants of forward collision alert 9 Warning Forward collision alert is just a warning system and does not apply the brakes.
Driving and operating 193 The minimum indicated distance is 0.5 s. If there is no vehicle ahead or the vehicle ahead is out of range, two dashes will be displayed: -.
194 Driving and operating results immediately in a strong braking. This function helps the driver brake quicker and stronger before the imminent collision. 9 Warning Active emergency braking is not designed to apply strong autonomous braking or to avoid automatically a collision.
Driving and operating 195 Parking assist Rear parking assist 9 Warning The driver bears full responsibility for the parking manoeuvre. Always check the surrounding area while reversing and using the rear parking assist system. The rear parking assist makes parking easier by measuring the distance between the vehicle and rear obstacles.
196 Driving and operating Manual deactivation is also possible by pressing the parking assist button r . When the system is deactivated, the LED in the button extinguishes. Additionally, Park Assist Off pops-up in the Driver Information Centre when the system is deactivated manually.
Driving and operating 197 Long press of button D (approx. one second) activates or deactivates the advanced parking assist. Button logic operates the systems by pressing as following: ■ front-rear parking assist is active: short press deactivates front-rear parking assist.
198 Driving and operating The distance indication in the Driver Information Centre can be inhibited by vehicle messages with a higher priority. After approving the message by pressing the SET/CLR button on the turn signal lever, distance indication appears again.
Driving and operating 199 acoustic signals. The driver must control acceleration, braking, steering and gear shifting. The system uses the sensors of the front-rear parking assist in combination with two additional sensors on both sides of the front and rear bumper.
200 Driving and operating Functionality When the vehicle passes a row of cars and the system is activated, the advanced parking assist system begins searching for a suitable parking slot. When a suitable slot is detected, a visual feedback on the Driver Information Centre and an acoustic signal are given.
Driving and operating 201 A successful parking manoeuvre is indicated by the End position symbol. Always pay attention to the sound of the front-rear parking assist.
202 Driving and operating Basic notes on parking assist systems 9 Warning Under certain circumstances, various reflective surfaces on objects or clothing as well as external noise sources may cause the system to fail to detect obstacles. Special attention must be paid to low obstacles which can damage the lower part of the bumper.
Driving and operating 203 Side blind spot alert The Side blind spot alert system detects and reports objects on either side of the vehicle, within a specified "blind spot" zone. The system alerts visually in each exterior mirror, when detecting objects that may not be visible in the interior and exterior mirrors.
204 Driving and operating by approx. 3 metres. The height of the zone is approx. between 0.5 metres and 2 metres off the ground. The system is deactivated if the vehicle is towing a trailer. Side blind spot alert is designed to ignore stationary objects such as guardrails, posts, curbs, walls and beams.
Driving and operating 205 Due to the high position of the camera the rear bumper can be seen on the display as a guide to position. The area displayed by the camera is limited. The distance of the image that appears on the display differs from the actual distance.
206 Driving and operating Fault Fault messages are displayed with a 9 on the top line of the Info-Display. The rear view camera may not operate properly when: ■ the surrounding is dark, ■ the sun or the beam of headlights is shining directly into the camera lens, ■ ice, snow, mud, or anything else covers the camera lens.
Driving and operating 207 An exclamation mark in a frame indicates that there is an add on sign detected which cannot be recognised by the system. The system is active up to a speed of 200 km/h depending on the lighting conditions. At night the system is active up to a speed of 160 km/h.
208 Driving and operating Pop-up function Speed limits and no passing signs are displayed as pop-ups on each page of the Driver Information Centre. The pop-up function can be deactivated on the traffic sign page by pressing the SET/CLR button on the turn signal lever.
Driving and operating 209 signs. Do not ignore traffic signs which are not displayed by the system. The system does not discern any other than the conventional traffic signs that might give or end a speed limit. Do not let this special feature tempt you into taking risks when driving.
210 Driving and operating At speeds below 56 km/h the system is inoperable. Fault The lane departure warning system may not operate properly when: ■ the windscreen is not clean ■ there are adverse environmental conditions like heavy rain, snow, direct sunlight or shadows The system can not operate when no lane marking is detected.
Driving and operating 211 Caution Use of fuel that does not comply to EN 590 or similar can lead to engine powerloss, increased wear or engine damage and may affect your warranty. Do not use marine diesel oils, heating oils, Aquazole and similar diesel- water emulsions.
212 Driving and operating Fill the tank completely at regular intervals to prevent corrosion in the tank. Faults and remedies If gas mode is not possible, check the following: ■ Is there enough liqu.
Driving and operating 213 Refuelling 9 Danger Before refuelling, switch off engine and any external heaters with combustion chambers. Switch off any mobile phones. Follow the operating and safety instructions of the filling station when refuelling. 9 Danger Fuel is flammable and explosive.
214 Driving and operating The fuel filler cap can be retained in the bracket on the fuel filler flap. For refuelling, fully insert the pump nozzle and switch it on. After automatic cut-off, it can be topped up with max. two doses of fuel. Caution Wipe off any overflowing fuel immediately.
Driving and operating 215 ACME Adapter: Screw the nut of the filling nozzle onto the adapter. Press locking lever on filler nozzle down. DISH (Italy) filler neck: Place the filler nozzle into the adapter.
216 Driving and operating EURO adapter: Spain DISH (Italy) adapter: Bosnia- Herzegovina, Bulgaria, Denmark, Estonia, France, Greece, Italy, Croatia, Latvia, Lithuania, Macedonia, Austria, Poland, Port.
Driving and operating 217 Trailer hitch General information Only use towing equipment that has been approved for your vehicle. Entrust retrofitting of towing equipment to a workshop. It may be necessary to make changes that affect the cooling system, heat shields or other equipment.
218 Driving and operating The permissible gross train weight must not be exceeded. This weight is specified on the identification plate 3 287. Vertical coupling load The vertical coupling load is the load exerted by the trailer on the coupling ball. It can be varied by changing the weight distribution when loading the trailer.
Driving and operating 219 Fitting the coupling ball bar All versions except 3-door hatchback: Press fastenings inward and fold the cover downward at the front. Remove cover. Disengage and fold down the socket. Remove the sealing plug from the opening for the coupling ball bar and stow it.
220 Driving and operating ■ Pull out rotary knob and turn clockwise as far as it will go. Inserting the coupling ball bar Insert the tensioned coupling ball bar in the opening and push firmly upwards until it audibly engages. The rotary handle snaps back into its original position resting against the coupling ball bar without a gap.
Driving and operating 221 ■ The coupling ball bar must be firmly engaged in the opening. ■ The coupling ball bar must be locked and the key removed. 9 Warning Towing a trailer is permitted only when a coupling ball bar is fitted correctly. If the coupling ball bar does not engage correctly, seek the assistance of a workshop.
222 Vehicle care Vehicle care General Information ................... 222 Vehicle checks ........................... 223 Bulb replacement ....................... 230 Electrical system ........................ 250 Vehicle tools ........................
Vehicle care 223 ■ Open the bonnet, close all doors and lock the vehicle. ■ Disconnect the clamp from the negative terminal of the vehicle battery.
224 Vehicle care 9 Danger The ignition system and Xenon headlights use extremely high voltage. Do not touch. Bonnet Opening Pull the release lever and return it to its original position. Move the safety catch sideways to the left vehicle side and open the bonnet.
Vehicle care 225 Pull out the dipstick, wipe it clean, insert it to the stop on the handle, pull out and read the engine oil level. Insert dipstick to the stop on the handle and make half a turn. Different dipsticks are used depending on engine variant.
226 Vehicle care Coolant level Caution Too low a coolant level can cause engine damage. If the cooling system is cold, the coolant level should be above the filling line mark. Top up if the level is low. 9 Warning Allow the engine to cool before opening the cap.
Vehicle care 227 Washer fluid Fill with clean water mixed with a suitable quantity of windscreen washer fluid which contains antifreeze. Caution Only washer fluid with a sufficient antifreeze concentration provides protection at low temperatures or a sudden drop in temperature.
228 Vehicle care The vehicle battery is maintenance- free provided that the driving profile allows sufficient charging of the battery. Short-distance-driving and frequent engine starts can discharge the battery. Avoid the use of unnecessary electrical consumers.
Vehicle care 229 Charging the vehicle battery 9 Warning On vehicles with stop-start system, ensure that the charging potential does not exceed 14.6 volts when using a battery charger. Otherwise the vehicle battery might be damaged. Jump starting 3 276.
230 Vehicle care Lift the wiper arm until it stays in the raised position, press button to disengage the wiper blade and remove. Attach the wiper blade slightly angled to the wiper arm and push until it engages. Lower wiper arm carefully. Wiper blade on the rear window Lift wiper arm.
Vehicle care 231 Halogen headlights 5-door hatchback, 4-door notchback, Sports tourer Halogen headlights with separate bulbs for low beam and high beam. Low beam (1) outer bulb. High beam (2) inner bulb. Sidelight/Daytime running light (3) . Low beam (1) 1.
232 Vehicle care High beam (2) 1. Rotate the cap (2) anticlockwise and remove it. 2. Rotate the bulb holder anticlockwise to disengage. Withdraw the bulb holder from the reflector. 3. Detach the bulb from the bulb holder and replace the bulb. 4. Insert the bulb holder, engaging the two lugs into the reflector and rotate clockwise to secure.
Vehicle care 233 3-door hatchback Bi-Halogen Headlight (1) with one bulb for low and high beam. Sidelight/Daytime running light (2) . Low/High beam (1) 1. Rotate the cap (1) anticlockwise and remove it. 2. Rotate the bulb holder anticlockwise to disengage.
234 Vehicle care Sidelight/Daytime running light (2) 1. Rotate bulb socket (2) anticlockwise to disengage. Withdraw the bulb socket from the reflector. 2. Remove the bulb from the socket by pulling. 3. Replace and insert new bulb into socket. 4. Insert the bulb socket into the reflector and turn clockwise.
Vehicle care 235 Corner lighting 1. Rotate the cap anticlockwise and remove it. 2. Rotate the bulb holder anticlockwise to disengage. Withdraw the bulb holder from the reflector. 3. Disengage the bulb from the plug connector by pulling. 4. Replace the bulb and connect bulb holder with the plug connector.
236 Vehicle care 2. Unscrew both screws and remove turn light assembly from the bumper. 3. Unscrew three screws and remove fog light assembly from the bumper. 4. Turn the bulb socket anti- clockwise and remove it from the reflector. 5. Disengage the bulb socket from the plug connector by pressing the retaining lug.
Vehicle care 237 2. Unscrew both screws and remove light assembly from the bumper. 3. Turn the bulb socket anti- clockwise and remove it from the reflector. 4. Disengage the bulb socket from the plug connector by pressing the retaining lug. 5. Remove and replace the bulb socket with bulb and attach the plug connector.
238 Vehicle care 2. Unscrew both screws and remove light assembly from the bumper. 3. Disengage the bulb socket from the reflector by pressing both retaining lugs. 4. Disengage the plug connector from the bulb socket by pressing the retaining lug. 5. Remove and replace the bulb socket with bulb.
Vehicle care 239 3. Disengage the bulb socket from the plug connector by pressing the retaining lug. 4. Remove and replace the bulb socket with bulb. 5. Attach the plug connector. 6. Insert the bulb socket into the reflector. 7. Swivel the spring clip forwards and engage.
240 Vehicle care Tail lights 5-door hatchback 1. Release the cover on the respective side and remove it. 2. Unscrew the plastic securing nut from the inside by hand. 3. Carefully withdraw the tail light assembly from recesses and remove. Make sure that the cable duct remains in position.
Vehicle care 241 7. Remove and replace the bulb by withdrawing or pushing the bulb slightly into the socket and rotating anticlockwise: Tail light ( 1 ) Brake light ( 2 ) Turn signal light ( 3 ) 8. Insert the bulb carrier into the tail light assembly and screw into place.
242 Vehicle care 5. Remove and replace the bulb by withdrawing or pushing the bulb slightly into the socket and rotating anticlockwise: Tail light ( 1 ) Rear fog light/Reverse light ( 2 ), depending on the side. 6. Insert the bulb carrier into the tail light assembly.
Vehicle care 243 Turn signal light ( 2 ) 6. Insert bulb holder and turn clockwise. Connect the wiring plug. Fit light assembly with the retaining pins into the recesses of the car body and tighten the securing nuts from the inside of the load compartment.
244 Vehicle care 2. Remove cover on the respective side. 3. Unscrew two plastic securing nuts from the inside by hand. 4. Carefully withdraw tail light assembly from recesses and remove. Make sure that the cable duct remains in position. 5. Detach wiring plug from bulb carrier.
Vehicle care 245 Light assembly in the tailgate 1. Open the tailgate and remove the blind covers on the respective side. 2. Unscrew and remove the screws.
246 Vehicle care 3-door hatchback 1. Release the cover on the respective side and remove it. 2. Unscrew both plastic securing nuts from the inside by hand. 3. Carefully withdraw the light assembly from the recesses and remove. 4. Detach wiring plug from bulb carrier.
Vehicle care 247 Only turn signal light ( 2 ) can be changed. 6. Insert and turn bulb holder clockwise into the tail light assembly. Connect the wiring plug with the light assembly. Fit light assembly with the retaining pins into the recesses of the car body and tighten the securing nuts from the inside of the load compartment.
248 Vehicle care 1. Slide lamp to its left side and remove with its right end. 2. Turn bulb holder anticlockwise and remove from housing. 3. Pull bulb from bulb holder and replace it. 4. Insert bulb holder and turn clockwise. 5. Insert left end of the lamp, slide to the left and insert right end.
Vehicle care 249 4. Insert bulb holder and turn clockwise. 5. Insert left end of the lamp, slide to the left and insert right end. Number plate light 1. Insert screwdriver in recess of the cover, press to the side and release spring. 2. Remove lamp downwards, taking care not to pull on the cable.
250 Vehicle care Electrical system Fuses Data on the replacement fuse must match the data on the defective fuse. There are three fuse boxes in the vehicle: ■ in the front left of the engine compartm.
Vehicle care 251 Engine compartment fuse box The fuse box is in the front left of the engine compartment. Disengage the cover and fold it upwards until it stops.
252 Vehicle care No. Circuit 15 Engine control module 16 Starter 17 Transmission control module 18 Heated rear window 19 Front power windows 20 Rear power windows 21 Rear electrical centre 22 Left hig.
Vehicle care 253 Instrument panel fuse box In left-hand drive vehicles, the fuse box is behind the storage compartment in the instrument panel. Open the compartment and push it to the left to unlock. Fold the compartment down and remove it. In right-hand drive vehicles, the fuse box is located behind a cover in the glovebox.
254 Vehicle care No. Circuit 14 Diagnostic connector 15 Airbag 16 Power outlet 17 Air conditioning system 18 Logistics 19 Body control module 20 Body control module 21 Instrument panel cluster, anti- .
Vehicle care 255 Fuse assignments No. Circuit 1 – 2 Trailer outlet 3 Parking assist 4 – 5 – 6 – 7 Power seat 8 – 9 – 10 – 11 Trailer module, trailer socket 12 Trailer module 13 Trailer outlet 14 Rear seat, electrical folding 15 – 16 Inside mirror, rear view camera 17 Power outlet No.
256 Vehicle care When assembling press the blind into the rubber grommets to reach full retention force. Vehicle tools Tools Vehicles with tyre repair kit Some tools and the towing eye are located together with the tyre repair kit in a tool box in the load compartment below the floor cover.
Vehicle care 257 Vehicles with spare wheel Variant 1a: 3-door and 5-door hatchback with rigid wheel wrench The jack, the tools and a strap for securing a damaged wheel are in the tool box below the spare wheel in the load compartment. The wheel wrench and the towing eye are in the tool bag located in the spare wheel well near the tool box.
258 Vehicle care Variant 3: 4-door notchback The jack and the tools are in the tool box below the spare wheel in the load compartment. The wheel wrench, the towing eye and an extension bolt for securing a damaged wheel (only vehicles with temporary spare wheel) are in the tool bag located in the spare wheel well near the tool box.
Vehicle care 259 Tyre pressure Check the pressure of cold tyres at least every 14 days and before any long journey. Do not forget the spare wheel. This also applies to vehicles with tyre pressure monitoring system. Unscrew the valve cap. Tyre pressure 3 309.
260 Vehicle care Caution Tyre pressure monitoring system warns only about low tyre pressure condition and does not replace regular tyre maintenance by the driver. All wheels must be equipped with pressure sensors and the tyres must have the prescribed pressure.
Vehicle care 261 If w flashes for 60-90 seconds and then illuminates continuously, there is a fault in the system. Consult a workshop. After inflating, driving may be required to update the tyre pressure values in the DIC. During this time w may illuminate.
262 Vehicle care matching process should also be performed after replacing a spare tyre with a road tyre containing the TPMS sensor. The malfunction light and the warning message or code should go off at the next ignition cycle.
Vehicle care 263 Temperature dependency Tyre pressure depends on the temperature of the tyre. During driving, tyre temperature and pressure increase. The tyre pressure value displayed in the DIC shows the actual tyre pressure. Therefore it is important to check tyre pressure with cold tyres.
264 Vehicle care If the wheel covers and tyres used are not factory approved, the tyres must not have a rim protection ridge. Wheel covers must not impair brake cooling. 9 Warning Use of unsuitable tyres or wheel covers could lead to sudden pressure loss and thereby accidents.
Vehicle care 265 3-door hatchback Tyre chains are permitted on tyres of size 225/55 R 17. Always use fine mesh chains that add no more than 10 mm to the tyre tread and the inboard sides (including chain lock). Tyre chains are also permitted on tyres of size 245/45 R 18.
266 Vehicle care 1. Take the tyre repair kit from the compartment. 2. Remove the compressor. 3. Remove the electrical connection cable and air hose from the stowage compartments on the underside of the compressor. 4. Screw the compressor air hose to the connection on the sealant bottle.
Vehicle care 267 10. Set the rocker switch on the compressor to I . The tyre is filled with sealant. 11. The compressor pressure gauge briefly indicates up to 6 bar whilst the sealant bottle is emptying (approx. 30 seconds). Then the pressure starts to drop.
268 Vehicle care If tyre pressure is more than 1.3 bar, set it to the correct value. Repeat the procedure until there is no more loss of pressure. If the tyre pressure has fallen below 1.3 bar, the vehicle must not be used. Seek the assistance of a workshop.
Vehicle care 269 ■ Never crawl under a jacked-up vehicle. ■ Do not start the vehicle when it is raised on the jack. ■ Clean wheel nuts and thread with a clean cloth before mounting the wheel. 9 Warning Do not grease wheel bolt, wheel nut and wheel nut cone.
270 Vehicle care Fold out the wheel wrench and install ensuring that it locates securely and loosen each wheel nut by half a turn. The wheels might be protected by locking wheel nuts. To loosen these specific nuts first attach the key adapter onto the head of the nut before installing the wheel wrench.
Vehicle care 271 Attach jack handle and with the jack correctly aligned rotate handle until wheel is clear of the ground. Sports Tourer, jack variant 2, 3 256: Set the jack to the necessary height. Position it directly below the jacking point in a manner that prevents it from slipping.
272 Vehicle care Jacking position for lifting platform Rear arm position of the lifting platform centrically under the recess of the sill. Front arm position of the lifting platform at the underbody. Spare wheel Some vehicles are equipped with a tyre repair kit instead of a spare wheel.
Vehicle care 273 To remove: 1. Open the floor cover. 2. Only 3-door hatchback: remove rear storage by pressing both buttons. Fold down cover and extract storage upwards. 3. The spare wheel is secured with a wing nut. Untwist nut, remove conus (only 3-door hatchback) to take out the spare wheel.
274 Vehicle care 4. Insert the strap through the spokes of the wheel as shown in the illustration. 5. Mount the hook to the rear lashing eye. 6. Tighten the strap and secure it using the buckle. 9 Danger Always drive with folded up and engaged rear seat backrests when stowing a damaged full size wheel in the load compartment.
Vehicle care 275 3. Take the extension bolt from the tool bag 3 256 and screw it in hand-tight using the hexagon key of the wheel wrench. 4. Store the tool box and the damaged wheel outside up in the spare wheel well and secure it by turning the wing nut clockwise on the bolt.
276 Vehicle care they are not fixed properly. During a sudden stop or a collision, loose equipment could strike someone. Store jack and tools always in the respective storage compartments and secure them by fixing. Damaged wheel placed in the load compartment must always be secured by the strap.
Vehicle care 277 ■ Never expose the vehicle battery to naked flames or sparks. ■ A discharged vehicle battery can already freeze at a temperature of 0 °C. Defrost the frozen vehicle battery before connecting jump leads. ■ Wear eye protection and protective clothing when handling a vehicle battery.
278 Vehicle care 2. After 5 minutes, start the other engine. Start attempts should be made for no longer than 15 seconds at an interval of 1 minute. 3. Allow both engines to idle for approx. 3 minutes with the leads connected. 4. Switch on electrical consumers (e.
Vehicle care 279 Caution Drive slowly. Do not drive jerkily. Excessive tractive force can damage the vehicle. When the engine is not running, considerably more force is needed to brake and steer. To prevent the entry of exhaust gases from the towing vehicle, switch on the air recirculation and close the windows.
280 Vehicle care Caution Drive slowly. Do not drive jerkily. Excessive tractive force can damage the vehicle. After towing, unscrew the towing eye. Insert cap at the top and engage downwards. Appearance care Exterior care Locks The locks are lubricated at the factory using a high quality lock cylinder grease.
Vehicle care 281 On vehicles with emblem touchpad: when cleaning with a high-pressure jet cleaner ensure a minimum distance of 30 cm when working around the tailgate to prevent unintended unlocking. Thoroughly rinse and leather-off the vehicle. Rinse leather frequently.
282 Vehicle care Paintwork damage Rectify minor paintwork damage with a touch-up pen before rust forms. Have more extensive damage or rust areas repaired by a workshop. Underbody Some areas of the vehicle underbody have a PVC undercoating while other critical areas have a durable protective wax coating.
Vehicle care 283 coloured upholstery. Removable stains and discolourations should be cleaned as soon as possible. Clean seat belts with lukewarm water or interior cleaner. Caution Close Velcro fasteners as open Velcro fasteners on clothing could damage seat upholstery.
284 Service and maintenance Service and maintenance General information ................... 284 Recommended fluids, lubricants and parts ..............
Service and maintenance 285 Confirmations Confirmation of service is recorded in the Service and Warranty Booklet. The date and mileage is completed with the stamp and signature of the servicing workshop.
286 Service and maintenance Select the appropriate engine oil based on its quality and on the minimum ambient temperature 3 289. Additional engine oil additives The use of additional engine oil additives could cause damage and invalidate the warranty.
Technical data 287 Technical data Vehicle identification .................. 287 Vehicle data ............................... 289 Vehicle identification Vehicle Identification Number The Vehicle Identification Number may be stamped on the identification plate and on the floor pan, under the floor covering, visible under a cover.
288 Technical data Information on identification label: 1 = Manufacturer 2 = Type approval number 3 = Vehicle Identification Number 4 = Permissible gross vehicle weight rating in kg 5 = Permissible gr.
Technical data 289 Vehicle data Recommended fluids and lubricants European service schedule Required engine oil quality All European countries (except Belarus, Moldova, Russia, Turkey) Only Israel Eng.
290 Technical data International service schedule Required engine oil quality All countries outside Europe except Israel Only Belarus, Moldova, Russia, Turkey Engine oil quality Petrol engines (includ.
Technical data 291 All countries outside Europe except Israel Only Belarus, Moldova, Russia, Turkey Engine oil quality Petrol engines (including CNG, LPG, E85) Diesel engines Petrol engines (including.
292 Technical data Engine data Sales designation 1.4 1.4 1.4 1.4 1.6 1.6 1.6 Engine identifier code A14XEL A14XER A14NEL A14NET LPG A16XER A16XHT A16SHT Number of cylinders 4 4 4 4 4 4 4 Piston displa.
Technical data 293 Sales designation 1.8 2.0 OPC 1.3 1.6 1.6 1.7 1.7 Engine identifier code A18XER A20NFT A13DTE B16DTH B16DTL A17DTN A17DTC Number of cylinders 4 4 4 4 4 4 4 Piston displacement [cm 3.
294 Technical data Sales designation 1.7 1.7 1.7 2.0 Turbo 2.0 Turbo Engine identifier code A17DTE A17DTF A17DTS A20DTH A20DTR Number of cylinders 4 4 4 4 4 Piston displacement [cm 3 ] 1686 1686 1686 .
Technical data 295 Performance 3-door hatchback Engine A14XER A14NEL A14NET A16XHT A16SHT Maximum speed 4) [km/h] Manual transmission 178 5) 192 201 219 230 Automatic transmission – – 200 210 – 4) The maximum speed indicated is achievable at kerb weight (without driver) plus 200 kg payload.
296 Technical data Engine A17DTF A17DTS A20DTH A20DTR Maximum speed 4) [km/h] Manual transmission 197 196 210 225 Automatic transmission – – 207 – 4) The maximum speed indicated is achievable at kerb weight (without driver) plus 200 kg payload. Optional equipment could reduce the specified maximum speed of the vehicle.
Technical data 297 Engine A16XHT A13DTE B16DTH B16DTL A17DTE A17DTC Maximum speed 4) [km/h] Manual transmission 220 175 200 184 188 186 Automatic transmission 212 – – – – – 4) The maximum speed indicated is achievable at kerb weight (without driver) plus 200 kg payload.
298 Technical data 4-door notchback Engine A14XER A14NET A14NET LPG A16XER A16XHT Maximum speed 4) [km/h] Manual transmission 183 5) 207 202 193 222 Automatic transmission – 205 – 185 215 4) The maximum speed indicated is achievable at kerb weight (without driver) plus 200 kg payload.
Technical data 299 Sports tourer Engine A14XER A14NEL A14NET A16XER A16XHT Maximum speed [km/h] 4) Manual transmission 175 190 200 185 220 Automatic transmission – – 198 180 211 4) The maximum speed indicated is achievable at kerb weight (without driver) plus 200 kg payload.
300 Technical data Vehicle weight Kerb weight, basic model without any optional equipment 3-door hatchback Engine Manual transmission Automatic transmission without/with air conditioning [kg] A14XER 1.
Technical data 301 3-door hatchback Engine Manual transmission Automatic transmission without/with air conditioning [kg] A17DTE 1503/1518 – A17DTS –/1503 – A17DTC –/1503 – A17DTF 1503/1518 – A20DTH –/1550 –/1571 A20DTR –/1571 – Optional equipment and accessories increase the kerb weight.
302 Technical data Kerb weight, basic model without any optional equipment 5-door hatchback Engine Manual transmission Automatic transmission without/with air conditioning [kg] A14XEL 1373/1388 – A1.
Technical data 303 5-door hatchback Engine Manual transmission Automatic transmission without/with air conditioning [kg] B16DTH 1488/1503 – B16DTL 1488/1503 – A17DTC 1503/1518 – A17DTE 1503/1518.
304 Technical data Kerb weight, basic model without any optional equipment 4-door notchback Engine Manual transmission Automatic transmission without/with air conditioning [kg] A14XER 1393/1405 – A1.
Technical data 305 Kerb weight, basic model without any optional equipment Sports tourer Engine Manual transmission Automatic transmission without/with air conditioning [kg] A14XER 1393/1408 – A14NE.
306 Technical data Sports tourer Engine Manual transmission Automatic transmission without/with air conditioning [kg] A17DTN 1550/1565 – A17DTF 1550/1565 – A17DTC 1550/1565 – A17DTS 1550/1565 – A20DTH 1550/1565 –/1613 A20DTR –/1613 – Optional equipment and accessories increase the kerb weight.
Technical data 307 3-door hatchback 5-door hatchback 4-door notchback Sports tourer Load compartment width [mm] 980 1027 976 1026 Load compartment height [mm] 512 554 546 721 Wheelbase [mm] 2695 2685 2685 2685 Turning circle diameter [m] 11.4 11.5 11.
308 Technical data Capacities Engine oil Engine A14XEL, A14XER A14NEL, A14NET A16XER A16SHT, A16XHT A18XER A20NFT including Filter [l] 4.0 4.0 4.5 5.5 4.5 6.0 between MIN and MAX [l] 1.0 1.0 1.0 1.0 1.0 1.0 Engine A13DTE ecoFlex B16DTH, B16DTL A17DTE, A17DTC A17DTF, A17DTN, A17DTS A20DTH, A20DTR including Filter [l] 3.
Technical data 309 Tyre pressures Tyre pressures differ depending on the model variant. The order of the listed car models is as follows: ■ 3-door hatchback ■ 5-door hatchback, 4-door notchback, Sports tourer Refer to the table header to find the correct tyre pressure for your model.
310 Technical data 3-door hatchback Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A14NEL, A14NET 225/55 R17, 210/2.
Technical data 311 3-door hatchback Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A17DTS, A17DTC 225/55 R17, 210/2.
312 Technical data 3-door hatchback Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) 245/35 R20 270/2.
Technical data 313 5-door hatchback Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A14NET, A14NEL 205/55 R16, 220/2.
314 Technical data 5-door hatchback Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A14NET LPG 205/60 R16, 220/2.
Technical data 315 5-door hatchback Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A16XHT, B16DTH, B16DTL 205/65 R16, 230/2.
316 Technical data 5-door hatchback Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A17DTC, A17DTS, A17DTN 205/65 R16, 230/2.
Technical data 317 5-door hatchback Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A17DTE 205/65 R16, 230/2.
318 Technical data 5-door hatchback Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A20DTH 205/65 R16, 230/2.
Technical data 319 Sports tourer Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A14XER 205/55 R16, 220/2.
320 Technical data Sports tourer Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A14NET, A14NEL 205/55 R16, 220/2.
Technical data 321 Sports tourer Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A14NET LPG 205/60 R16, 220/2.
322 Technical data Sports tourer Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A16XHT, B16DTH, B16DTL 205/65 R16, 230/2.
Technical data 323 Sports tourer Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A17DTC, A17DTS, A17DTN 205/65 R16, 230/2.
324 Technical data Sports tourer Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A17DTE 205/65 R16, 230/2.
Technical data 325 Sports tourer Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A20DTH 205/65 R16, 230/2.
326 Technical data 4-door notchback Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A14XER 205/55 R16, 220/2.
Technical data 327 4-door notchback Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A14NET LPG 205/60 R16, 220/2.
328 Technical data 4-door notchback Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A16XHT, B16DTH, B16DTL 205/65 R16, 230/2.
Technical data 329 4-door notchback Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A17DTC, A17DTS 205/65 R16, 230/2.
330 Technical data 4-door notchback Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) A17DTE 205/65 R16, 230/2.
Customer information 331 Customer information Customer information ................ 331 Vehicle data recording and pri‐ vacy ........................................... 334 Customer information Declaration of conformity Radio transmission systems This vehicle has systems that transmit and/or receive radio waves subject to Directive 1999/5/EC.
332 Customer information.
Customer information 333 Jack, 3-door and 5-door hatchback, 4-door notchback Translation of the original declaration of conformity Declaration of conformity according to EC Directive 2006/42/EC We declare that the product: Product designation: Jack Type/GM part number: 13576735 is in compliance with the provisions of Directive 2006/42/EC.
334 Customer information Adam Opel AG D-65423 Rüsselsheim Vehicle data recording and privacy Event data recorders Data storage modules in the vehicle A large number of electronic components of your vehicle contain data storage modules temporarily or permanently storing technical data about the condition of the vehicle, events and errors.
Customer information 335 When using the vehicle, situations may occur in which these technical data related to other information (accident report, damages on the vehicle, witness statements etc.) may be associated with a specific person - possibly, with the assistance of an expert.
336 Index A Accessories and vehicle modifications .......................... 222 Active Emergency Braking ......... 193 Active head restraints ................... 39 Adaptive cruise control ....... 119, 182 Adaptive forward lighting .......... .......
337 Child restraints.............................. 54 Child restraint systems ................ 54 Cigarette lighter ......................... 107 Climate control ............................. 17 Climate control systems ............. 150 Clock.........
338 Glass panel .................................. 37 Glovebox ..................................... 60 Graphic-Info-Display, Colour- Info-Display ............................ 124 H Halogen headlights .................... 231 Hand brake ..............
339 P Parking ................................ 19, 165 Parking assist ............................ 195 Parking brake ............................ 172 Parking lights ............................. 145 Particulate filter ........................... 166 Performance .
340 Towing the vehicle ..................... 278 Traction Control system ............. 174 Traction Control system off......... 117 Traffic sign assistant ................... 206 Trailer coupling ........................... 217 Trailer stability assist .
Ein wichtiger Punkt beim Kauf des Geräts Opel Astra (2015) (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Opel Astra (2015) noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Opel Astra (2015) - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Opel Astra (2015) reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Opel Astra (2015) erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Opel Astra (2015) besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Opel Astra (2015) verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Opel Astra (2015). Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Opel Astra (2015) gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
