Benutzeranleitung / Produktwartung SR607 des Produzenten Onkyo
Zur Seite of 108
E n A V Receiv er TX-SR607 Instruction Manual Thank you for purchasing an Onkyo A V Receiv er. Please read this manual thoroughl y before making connections and plugg ing in the unit. Follo wing the inst ructions in this manual will enable you to obtain opti mum performance and listening enjoyment from your new A V Receiv er.
2 Impor tant Safety Instructions 1. Read these ins tructions. 2. Ke ep these instructi ons. 3. Heed all warnings. 4. Follo w all instructions. 5. Do not use this apparatus near w ater . 6. Clean only with dry cloth. 7. Do not block an y ventil ation openings.
3 Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording copyright ed material is il legal wit h- out the permission of the copyright holder . 2. A C Fuse —The A C fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer .
4 Precautions —Continued F or British models Replacement and mounting of an A C plug on the po wer supply cord of this unit should be performed only by qualified service personnel.
5 Features Amplifier • 90 W atts/Channel @ 8 ohms (FTC) • 140 W atts/Channel @ 6 ohms (IEC) • 175 W atts/Channel @ 6 ohms (JEIT A) • WRA T -Wide Range Amplif ier T echnology (5 Hz-100 kHz bandwidth) • Optimum Gai n V olume Circuitry • H.C.
6 Multir oom Capability Y ou can use two speaker systems with this A V recei ver —a surround-so und speaker system (up to 7.1 channels) in your main listening room, a stereo speake r system in a second room, or Zone 2, as we call it. And, you can select a different audio source for each room.
7 Contents Introd uction Important Safety Instructions .................................... 2 Precautions ............................................................... 3 Supplied Accessories ................................................ 4 Features .
8 Fr ont & Rear P anels North American/T aiwan models Other models The actual front panel has v arious logos printe d on it. They are not sho wn here for clarity .
9 Fr ont & Rear P anels —Continued The page numbers in parentheses show where you can find the main explanation for each item. a ON/ST ANDBY button (38) This bu tton is used to set the A V recei ver to On or Standby .
10 Front & Rear P a nels —Continued For detailed information, se e th e pages in parentheses. a SLEEP indi cator (53) Lights up when the Sleep function has been set. b MUTING indicator (53) Flashes while the A V recei ver is mute d. c Listening mode and format indicator s (62) Show the selected listen ing mo de and audio input signal format.
11 Fr ont & Rear P anels —Continued North American/T aiwan models Other models On some model a DIGIT AL IN CO AXIAL 1 and 2 These coaxial digital audi o inputs are for connect- ing components with coaxia l digital audio outputs, such as CD and D VD players.
12 Front & Rear P a nels —Continued c COMPONENT VIDEO IN 1 and 2 These RCA component video inputs are for con- necting components with a component video out- put, such as a D VD player, D VD rec order , or D VR (digital video recorder). They’ re assignable, which means you can assign each one to an input selector to suit your setup.
13 Remote Contr oller Notes: • If the remote controller doesn’t wo rk reliably , try replacing the batteries. • Don’ t mix new and old batteries or dif ferent types of batteries. • If you intend not to use the re mote controller for a long time, remo ve the batter ies to prev ent damage from leakage or corrosion.
14 Remote Contr oller —Continued For detailed information, se e th e pages in parentheses. a ON/ST ANDBY button (38) Sets the A V receiv er to On or Standby . b REMO TE MODE/INPUT SELECT OR buttons (51, 93–99) Selects the remote contro ller modes and the input sources.
15 About Home Theater Thanks to the A V receiver’ s superb capabilit ies, you can enjoy surround sound with a real sense of mov ement in your own home—just lik e being in a movie th eater or concert hall. W ith DVDs you can enjo y DTS and Dolby Digital.
16 Connecting the A V Receiver Speaker Configurat ion For 7.1-channel surround-sound playback, you need sev en speakers and a po wered subwoofer . The following tabl e indicates the channels you should use depending on the numb er of speakers that you ha ve.
17 Connecting the A V Receiver —Continued Speaker Connectio n Precautions Read the following before connecting your speak ers: • North American/ T aiwan models: Y ou can connect speakers with an impedance of between 6 an d 16 ohms.
18 Connecting the A V Receiver —Continued The follow ing illustration shows which spea k er should be connected to each pair of terminals. If you’ re using only one surround back speaker , connect it to th e left (L) SURR B A CK SPEAKERS terminals.
19 Connecting the A V Receiver —Continued The FR ONT L/R and SURR B A CK L/R terminal posts can be used with front speakers and surro und back speakers respe ctiv ely , or bi-amped to provide se parate tweeter and woofer feeds for a pair of front speake rs that support bi-amping, prov iding improved bass and treble performance.
20 Connecting the A V Receiver —Continued This section explains ho w to connect the supplied indoor FM antenna and AM loop an tenna, and ho w to connect commercially av ailable ou tdoor FM and AM antennas. The A V Recei ver won’ t pick up an y radio signals with- out any antenna connected, so you must connect the antenna to use the tuner .
21 Connecting the A V Receiver —Continued Connecting an Outdoor FM Antenna If you cannot achie ve good re ception with the supplied indoor FM antenna, try a co mmercially a vailable out- door FM antenna instead. Notes: • Outdoor FM antennas w ork best outside, but usable results can someti mes be obtained when in stalled in an attic or l oft.
22 Connecting the A V Receiver —Continued • Before making any A V connections, read the manuals supplied with your other A V components. • Don’t connect the po wer cord until you’ ve completed and double-checked a ll A V connections.
23 Connecting the A V Receiver —Continued About HDMI Designed to meet the in crease d demands of digital TV , HDMI (High Definiti on Multimedia Interfa ce) is a new digita l interface standard for connecting TVs, projectors, D VD players, set-top box es, and othe r video components.
24 Connecting the A V Receiver —Continued Making HDMI Connections ■ Video Signals Digital video signals receiv ed by th e HDMI IN jacks are normally output by the HDMI OUT for display on your TV . Composite video and component video sources can be upcon verted for the HDMI output.
25 Connecting the A V Receiver —Continued By connecting both the audio and video outputs of your D VD pl ayer and other A V components to the A V receiv er, you can select both the audio and video simu ltaneously simply b y selecting the appropr iate input source on the A V recei ver.
26 Connecting the A V Receiver —Continued ■ Signal Selection If signals are present at mo re than one input, the inputs will be selected autom atically in the fol- lowin g order of priority: HDMI, component video, composite video.
27 Connecting the A V Receiver —Continued See “Connecting Compon ents with HDMI” on page 23 f or HDMI connection inf ormation. • W ith connection , you can listen to and reco rd audio from your TV and listen in Zone 2. • T o enjoy Dolby Digital and DTS, use connection or .
28 Connecting the A V Receiver —Continued See “Connecting Components with HDMI” on page 23 for HDMI connection inf ormation. • W ith connection , you can listen to and record audio from a D VD and listen in Zone 2. • T o enjoy Dolb y Digital and DTS, use connection or .
29 Connecting the A V Receiver —Continued W ith this hookup, you can use your VCR’ s tuner to li sten to your fav orite TV programs via the A V receiv er, useful if your TV has no audio outputs. • W ith connection , you can listen to the VCR or D VD recorder even in Zone 2.
30 Connecting the A V Receiver —Continued Notes: • The A V recei ver must be turned on for recording. Recording is not possible while it’ s in Standby mode.
31 Connecting the A V Receiver —Continued W ith this hookup, you can use your satellite or cable receiv er to listen to your fa vorite TV programs via the A V recei ver, useful if your TV has no audio outputs. • W ith connection , you can listen to and record audio from the video source and listen in Zone 2.
32 Connecting the A V Receiver —Continued • W ith connection , you can listen to and record audio from the game console or listen in Zone 2. • T o enjoy Dolby Digital and DTS, us e connection .
33 Connecting the A V Receiver —Continued Note: When it is connected at the same tim e as A UX INPUT A UDIO L/R terminal, the input of POR T ABLE is giv en priority to and outputted. Connecting a Camcor der or Other Device Connection A V receiver Signal flow Camcorder etc.
34 Connecting the A V Receiver —Continued ■ CD Player or T urntable (MM) with Built-in Phono Preamp • W ith connection , you can listen to and record audio from the CD player and listen in Zone 2. • T o connect the CD player di gitally , use connection or .
35 Connecting the A V Receiver —Continued • W ith connection , you can play and record and listen in Zone 2. • T o connect the recorder digitally for playback, use connections and , or and .
36 Connecting the A V Receiver —Continued ■ If Y our iP od Suppor ts Vide o: Connect your RI Dock’ s audio output jacks to the A V receiv er’ s GAME IN or VCR/D VR IN L/R jacks, and connect its video output ja ck to the A V receiv er’ s GAME IN or VCR/D VR IN V jack.
37 Connecting the A V Receiver —Continued Wi t h u (Remote Interactiv e), you can use the follow- ing special functions: ■ Auto P ower On/Standby When you start playback on a component connected via u , if the A V receiver is on Standb y , it will auto- matically turn on and select that component as the input source.
38 T urning On the A V Receiver ST ANDBY/ON ON/ST ANDBY RECEIVER ST ANDBY indicator T urning On and Standby Press the [ON/ST ANDBY] button. Alternatively , press the remote c ont roller’ s [RECEIVER] button, f ollowed by the [ON/ST ANDBY] button. The A V recei ver comes on, the display li ghts up, and the ST ANDB Y indicator goes off.
39 Fir st Time Setup This section explains the settings that you need to make before using the A V recei v er for the very f irst time. Carry out the settings for th e A V recei ver b y using t he Onscreen Setup Menu. The settings of the A V recei v er can be changed using the Display .
40 First Time Setup —Continued HDMI Input Setup If you connect a video component to HDMI IN, you must assign that input to an input selector . F or example, if you connect your D VD player to HDMI IN1, you must assign HDMI IN1 to the D VD/BD input selector .
41 First Time Setup —Continued Component Video Setup If you connect to a COMPONENT VIDEO IN, you must assign it to an input selector . For example, if you connect your D VD player to COMPONENT VIDEO IN 2, you should assign it to the D VD/BD input selector .
42 First Time Setup —Continued If you connect a component to a digital input jack, you must assign t hat jack to an in put selector . For e xample, if you connect your CD player to the OPTICAL IN1 jack, you should assign that jack to the CD input selector .
43 First Time Setup —Continued If the impedance of any speaker is 4 ohms or more but less than 6, set the minimum speaker impedance to 4 ohms. If you’ ve connected your front speak ers to the FRONT L/R and SURR B A CK L/R termin al posts for bi-amping, you must change the “Speaker T ype” setting.
44 First Time Setup —Continued For the on screen setup menus to display properly , you must specify the TV system used in your area. Note: This procedure can also be perform ed on the A V recei ver by using its [SETUP] b utton, arro w buttons, and [ENTER] button.
45 First Time Setup —Continued Note: This procedure can also be performed on the A V receiver by using its [SETUP] b utton, arrow b uttons, and [ENTER] button.
46 First Time Setup —Continued W ith the supplied calibrated microphone, Audyssey 2EQ automatic ally determines the number of speakers connected, their size for purposes of bass management, optimum cros sove r frequencies to the subwoofer (if present), and distances from the primary listening position.
47 First Time Setup —Continued Using A ud yssey 2EQ ™ The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is con nected to the MONITOR OUT V or the COMPONENT VIDEO OUT, use the A V receiver’ s display when changing settings.
48 First Time Setup —Continued • Make the room as quiet as possible. Background noise can disrupt the room measurements. Close windows, silence cell phones, television s, radios, air conditioners, fluorescent lights, home appliances, light dimmers, or other devices.
49 First Time Setup —Continued Notes: • When the room correcti on and speaker setup is complete, the “Equalizer Sett ings” (page 72) will be set to “Audyssey” an d the “Dynamic EQ” (page 74) will be set to “On”.
50 First Time Setup —Continued ❏ Writing Error! This message appears if saving fails. T ry sa ving again. If this message appears after 2 or 3 attempts, the A V receiv er is probably malfunctioning. Contact your Onkyo dealer . Retry : Return to step 2 and try again.
51 Basic Operations This section explains ho w to select th e input source (i.e., the A V component that you want to listen to or w atch). Selecting the Input Sour ce 1 Use the A V re ceiver’ s input select or buttons to se lect the input source.
52 Basic Oper ations —Continued Y ou can adjust the bass and treble for the front speakers, except when the Direc t, Pure Audio listening mode is selected. ■ Bass Y ou can boost or cut lo w-frequency sounds output by the front speakers from –10 dB to +10 dB in 2 dB steps.
53 Basic Operations —Continued Y ou can temporarily mute th e output of the A V recei ver. W ith the sleep time r , you can set the A V recei ver to turn off aut omatically after a specif ied period. If you need to cancel the sleep timer , p ress the [SLEEP] but ton repeatedly u ntil the SLEEP indicato r disappears.
54 Listening to the Radio W ith the built-in tun er you can enjoy AM and FM radio stations. Y ou can store your fav orite stations as presets for quick selection. Listening to the Radio T uning into Radio Stations ■ Auto T uning Mode When tuned into a station, the T UNED indicator appears.
55 Listening to the Radio —Continued Y ou can store a combination of up to 40 of your fa vorite AM/FM radio stati ons as presets. Note: Y ou can name yo ur radio pr esets for easy identification (see page 79). Its name is di splayed instead of the band and frequency .
56 Listening to the Radio —Continued RDS only works in ar eas where RDS br oadcasts ar e av ailable. When tuned into an RDS st ation, the RDS indicator appears. ■ What is RDS? RDS stands for Radio Data System and is a method of transmitting data in FM radi o signals.
57 Listening to the Radio —Continued When tuned to an RDS station th at’ s broadcasting text informat ion, the te xt can be displayed. Displa ying Radio T ext (RT) Notes: • The message “ W ai ting ” may appear while the A V recei ver waits for the R T information.
58 UP-A1 series Doc k f or iP od W ith the UP-A1 series Dock (sold separately), you can easily play the music, photo, or mo vie stored on your Apple iPod through the A V receiv er and enjoy great sound. Y ou can use the A V rece iv er’ s remote controller to operate your iPod.
59 UP-A1 series Doc k for iP od —Continued Operating Notes: • Before selecting a differ ent input source, stop iPod playback to prev ent the A V rec eiv er from selecting the iPod input source by mistake. • If any accessories are conne cted to your iPod, the A V recei ver may not be able to select the input source properly .
60 UP-A1 series Dock for iP od —Continued a Arro w [ q ]/[ w ] and ENTER buttons Used to navigate me nus and select items. b Previous [ 7 ] button Restarts the current song. Press it twice to select the previous song. c Rewind [ 5 ] button Press and hold to re wind.
61 Recor ding This section explains ho w to record the selected input source to a component with re cording ca pability , and how to record aud io and video from different sources. Notes: • The surround sound and D SP listening modes cannot be recorded.
62 Using the Listening Modes See “ About the Listening Modes” on page 67 for detailed information a bout the listening modes. Selecting on the A V receiver ■ [PURE A UDIO] b utton This button selects the Pure Audio listening mode.
63 Using the Listening Modes —Continued Mono/Multiple x Sourc es ✔ : A vail able Li stening Modes Notes: *1 Pure Audio listening mo de is not available for Nor th American/T aiwan models. *2 Which Front high spea kers or Surround back speakers outputs th e sound is swi tched by the “S pLayout” sett ing on page 76 .
64 Using the Listening Modes —Continued Stereo Source ✔ : A vailable Listening Modes Notes: *1 Pure Audio l istening mod e is not available for North American/T aiwan models. *2 Which Front h igh speaker s or Surround ba ck speaker s outputs the sou nd is switched b y the “SpLayo ut” setting on pa ge 76.
65 Using the Listening Modes —Continued 5.1 chan nel Sourc es ✔ : A vail able Li stening Modes Notes: *1 Pure Audio listening mo de is not available for Nor th American/T aiwan models. *2 Which Front high spea kers or Surround back speakers outputs th e sound is swi tched by the “S pLayout” sett ing on page 76 .
66 Using the Listening Modes —Continued 7.1 channe l Source s ✔ : A vailable Listening Modes DTS-ES Discrete/ Matrix Sources Notes: *1 Pure Audio l istening mod e is not available for North American/T aiwan models.
67 Using the Listening Modes —Continued The A V receiv er’ s listeni ng modes can transform your listening room into a m ovie theater or concert hall, with high fidelity and stunning surround sound.
68 Using the Listening Modes —Continued DTS-ES Matrix This mode is for use with DTS-ES Matrix soundtracks, which use a matrix-encoded back-channel for 6.1/7.1- channel playback. Use it with DVDs that bear the DTS- ES logo, especially thos e with a DTS-ES Matrix soundtrack.
69 Ad v anced Setup The onscreen setup menus appear on the connected TV and provide a con venient way to change the A V receiver’ s variou s settings. Settings are orga nized into nine categories on the main menu , most containing a submenu . Onscreen Setup Menu s 1.
70 Adv anced Setup —Continued Some of the settings in this section are set automatica lly by the Audyssey 2EQ™ Room Correction and Speak er Setup function (see page 46).
71 Adv anced Setup —Continued LPF of LFE 80Hz, 90Hz, 100Hz (default), 12 0Hz (Low-P ass Filter for the LFE Channel) This setting is not set automatic ally by the Audyssey 2EQ™ Room Correction and Speaker Setup function (see page 46).
72 Adv anced Setup —Continued Speaker Levels Calibration This setting is set au tomatically b y the Audyssey 2EQ™ Room Correction and Speaker Setup function (see page 46). Here you can adjust the le ve l of each speaker with the built-in test tone so that the v olume of each speak er is the same at the listening position.
73 Adv anced Setup —Continued W ith the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like. A udio Adjust Multiplex/Mo no Settings Multiple x Input Channel Main: The main channel is output (def ault). Sub: The sub channel is output.
74 Adv anced Setup —Continued DTS Setting Neo:6 Music Center Image 0 to 5 (default: 2) The DTS Neo:6 Music listening mode creates 6-channel surround sound fro m 2-channel stereo sources. W ith this setting, you can specify by ho w much the front left and right channel output is atte nuated in order to create the center channel .
75 Adv anced Setup —Continued Y ou can change v arious audio settings by pressing the [A UDIO] button. Note: When the “Audio TV Out” setting is set to “On” (page 81), the [A UDIO] b utton is disabled. Using the A udio Settings RECEIVER AU D I O qwer 1 Press the [RECEIVER] button f ollowed b y the [A UDIO] b utton.
76 Adv anced Setup —Continued CinemaFIL TER W ith the CinemaFIL TER, you can soften ov erly bright movi e soundtracks, which ar e typi cally mixed for reproduction in a movie theater .
77 Adv anced Setup —Continued Y ou can assign a def ault list ening mode to each input source that will b e sele cted automatically when you select each input source. For e xample, you can set the default listening mode to be used with Dolby Digita l input signals.
78 Adv anced Setup —Continued This section explai ns items on the “S ource Setup” menu. Items can be set individuall y for each input selector . IntelliV ol ume W ith IntelliV olume, you can set the input level for each input selector indi vidually .
79 Adv anced Setup —Continued Name Edit Y ou can enter a custom name for each individ ual input selector and radio preset fo r easy identif ication. Whe n entered, the custom name will appear on the display . The custom name is edited using th e character input screen.
80 Adv anced Setup —Continued This section explains the it ems on t he “Miscellaneous” menu. Note: This procedure can also be performed on the A V receiver by using its [SETUP] b u tton, arro w buttons, and [ENTER] button. Vo l u m e S e t u p ■ Maximum V olume W ith this setting, you can lim it the maximum v olume.
81 Adv anced Setup —Continued . This section explains item s on the “Hardware Setup” menu. Note: This procedure can also be performed on the A V receiver by using its [SETUP] b utton, arrow b uttons, and [ENTER] button. Remote Con trol ■ Remote ID When sev eral Onkyo components are used in the same room, their remote ID codes may overlap.
82 Adv anced Setup —Continued ■ Lip Sync The A V recei ver c an be set to automaticall y correct an y delay between the video and th e audio, based on the data from the connected monitor . Notes: • This function works only if your HDMI-compatible TV supports HDMI Lip Sync.
83 Adv anced Setup —Continued W ith this preference, you ca n protect your settings by locking the setup menus. ■ Resolution (Reso) Y ou can specify the outpu t resolution for the HDMI out- puts and ha ve the A V receiver up con vert the picture res- olution as necessary to ma tch the resolution supported by your TV .
84 Adv anced Setup —Continued ■ Zoom Mode (Zo om) This setting determines the aspect ratio that wi ll be used for 480i, 480p, 576i, and 576p i nput signals when they are out- put by the HDMI O UT . This setting only applies when the HDMI Output Resolution setting is set to 1080i or 720p.
85 Zone 2 In addition to your main listening room, you can also enjoy playback in the othe r room, or as we ca ll Zone 2. And, you can select a different source for each room. There are two ways you can connect Zone 2 speakers: 1. Connect them directly to the A V receiv er.
86 Zone 2 —Continued Connecting Y our Zone 2 Speakers to an Amp in Zone 2 This setup allows 7.1-channe l playback in your main lis- tening room and 2-channel st ereo playback in Zone 2, with a different source in each room.
87 Zone 2 —Continued Notes: • When “Act” is selected a nd Zone 2 turned on, the Zone 2 speakers connected to the ZONE 2 L/R speaker terminals output sou nd, but the surround back or front high speake rs connected to the SURR B A CK/ FR ONT HIGH L/R speaker terminals do not.
88 Zone 2 —Continued Contro lling Zone 2 with the Remote Contro ller Note: T o control Zone 2, you must press the remote control- ler’ s [ZONE 2] b utton first. Adjusting the V olume for Zone 2 Muting Zones Notes: • Only analog input sources are output by the ZONE 2 LINE OUT and ZONE 2 L/R speaker terminals.
89 Contr olling Other Components Y ou can use the A V recei ver’ s remote control ler (RC-738M) to control your other A V components, including those made by ot her manufacturers. This sec- tion explains ho w to enter th e remote control c ode for a component that you want to control: D VD, TV , VCR, etc.
90 Controlling Other Components —Continued Note: This procedure can also be perform ed on the A V recei ver by using its [SETUP] b utton, arro w buttons, and [ENTER] button. 6 Use the arrow [ q ]/[ w ]/[ e ]/[ r ] but- tons to select a character , and then press [ENTER].
91 Contr olling Other Components —Continued Y ou’ ll need to enter a code for each component that you want to control. Note: The remote control codes provided are correct at t he time of printing, but are subject to change.
92 Controlling Other Components —Continued Onkyo components that are connected via u are con- trolled by pointing the remo te controll er at the A V receiv er, not the component. Th is allo ws you to control components that are out of vie w , in a rack, for example.
93 Contr olling Other Components —Continued By pressing the [TV] button that’ s been programmed with the remote control code for TV , you can control your TV with the following b uttons. For details on entering a remote control code for a differ- ent component, see page 91.
94 Controlling Other Components —Continued By pressing the REMO TE MODE button that’ s been programmed with the remote control code for your D VD player (HD D VD, Blu-ray , or TV/D VD combination), you can control your player w ith the follo wing bu ttons.
95 Contr olling Other Components —Continued u CLR button Cancels functions and cl ears entered numbers. Notes: • With some components, certain b uttons may not work as expected, and some may not work at all.
96 Controlling Other Components —Continued By pressing the REMO TE MODE button that’ s been programmed with the remote control code fo r your sat- ellite receiver , cable receiver , or D VD recorder (DBS/ PVR combination or cable/ PVR combination), you can control your player with the follo wing buttons.
97 Contr olling Other Components —Continued By pressing the REMO TE MODE button that’ s been programmed with the remote control code for your CD player , CD recorder , or MD player , yo u can control your player with the follo wing but tons. The [CD] bu tton is preprogrammed with the remote con- trol code for controlling an Onkyo CD player .
98 Controlling Other Components —Continued By pressing the REMO TE MODE button that’ s been programmed with the remote contr ol code for your Dock, you can control your iPod in the Dock with the follow ing buttons. For some RI docks, th e [ ON/ST ANDBY] button may not work with a remote control code 82990 (without RI).
99 Contr olling Other Components —Continued By pressing the REMO TE MODE button that’ s been programmed with the remote control code for your cas- sette recorder , you can control your cassette recorder with the following b uttons.
100 T roub leshooting If you hav e any trouble using the A V recei ver, look for a solution in this section. If you can’ t resolve the issue yourself, contact your Onkyo dealer . Can’t turn on the A V rec eiver • Make sure that the power cor d is properly plugged into the wall outle t.
101 T r oubleshooting —Continued The surround bac k speakers produce no sound • Depending on the current listening mode, no sound may be produced by the surround back speakers. Select another liste ni ng mode (page 67). • Not much sound may be produced by the surround back speakers wit h some sources.
102 T r oubleshooting —Continued There’ s no picture from a sour ce connected to an HDMI IN • Reliable operation with an HDMI-to-D VI adapter is not guaranteed.
103 T r oubleshooting —Continued • If you still can’t control your iPod, start playback by pressing your iPod’ s Play button. Remote operation should then be possible. • Try resetting your iPod. • Depending on your iPod, some b uttons may not work as expected.
104 Specifications Amplifier Section Video Section Tu n e r S e c t i o n General ■ Video Inputs ■ Video Outputs ■ Audio Inputs ■ Audio Outputs ■ Contr ol T erminal Specifications and features ar e subject to change without notice.
105 Video Resolution Char t The follow ing tables sho w how vide o signals at dif ferent resolutions are output by the A V recei ver. ✔ : Output NTSC HDMI COMPONENT COMPOSITE 1080p (60Hz/24Hz) 1080i.
106 Memo.
107 Memo.
108 SN 29344951 Y0902-1 (C) Copyright 2009 ONKY O CORPORA TION Japan. All rights reserved. http://www.onkyo.com/ HOMEPAGE Sales & Product Planning Div . : 2-1, Nisshin-cho , Ney agawa-shi, OSAKA 572-8540, J AP AN T el: 072-831-8023 F ax: 072-831-8163 ONKY O U .
Ein wichtiger Punkt beim Kauf des Geräts Onkyo SR607 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Onkyo SR607 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Onkyo SR607 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Onkyo SR607 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Onkyo SR607 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Onkyo SR607 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Onkyo SR607 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Onkyo SR607. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Onkyo SR607 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
