Benutzeranleitung / Produktwartung FoodPro des Produzenten Omega
Zur Seite of 24
Fo o dP r o ™ PREMIER F OOD P ROCE SSOR INSTRUCTION M ANUAL.
.
4 Introduction Food Processor Safety .............................................................................................. 4 Electrical Requirements ............................................................................................ 4 Important Safeguards .
5 Y our safety and the safety of others are very important.W e have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
6 IMPORT ANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. T o protect against risk of electrical shock do not put Food Processor in water or other liquid.
7 W ARNING Cut Hazard Handle blades carefully. Failure to do so can result in cuts. First Cleaning Before using your Omega Food Pro for the first time, wash all r emovable parts. Cleaning the Food Processor 1. Make sure the Food Pro is unplugged. 2. Wipe the motor base and cor d with a warm, sudsy cloth, and wipe clean with a damp cloth.
8 FOOD PROCESSOR FEA TURES • Large 11-Cup W ork Bowl • Large Chopping/Mixing Stainless Steel Blade • W ork Bowl Cover with wide Feed Chute • Stainless Steel Dough Blade • Compact 4-Cup Mini .
9 1. Large 11-Cup W ork Bowl Durable polycarbonate bowl large enough for most jobs. 2. W ork Bowl Cover with Wide Feed Chute Handles large items with minimal pr eparat i on . 3. Large Chopping/Mixing Stainless Steel Blade Multi-use blade for quick mincing, cho pping, mixing, and emulsifications.
10 FOOD PROCESSOR FEA TURES 7. 2mm/4mm Stainless Steel Slicing Disk The two-sided disc will produce two differ ent size slices depending on the side use d.
11 1. Place the large work bowl onto the motor housing with the main handle to the left of the power panel. This aligns the bowl to properly engage the safety interlock. T urn the main handle to the right until it “clicks” or “locks” into place.
12 1. Rotate the Cover to the left until the “tab” is unseated. 2. Remove the Blade by pulling upward. (If the blade is held in place by ingredients, it may be removed with the W ork Bowl) 3. Rotate the Main Handle to the left until it is unseated and lift off of the motor housing.
13 Maximum Liquid Level This line is visible on the work bowl. Use as an indication of the maximum amount of liquid that can be used in the Food Pro. Power Pad The Food Pro will not operate until the Large W ork Bowl and the W ork Bowl Cov er are both properly installed.
14 1. Place the large work bowl onto the motor housing with the main handle to the left of the power panel. This aligns the bowl to properly engage the safety interlock turn the main handle to the right until it clicks” or “lock s” in to place. The main handle shoul d no w be centered with the Power Panel.
15 DISASSEMBL Y – SLICING OR SHREDDING DISK 1. Rotate the Cover to the left until the “tab” is unseated. 2. Remove the Disk and Adapter by pulling upward. 3. Remove the Disk from the Adapter by rotating the disk and/or adapter . 4. Rotate the Main Handle to the left until it is unseated and lift off of the motor housing.
16 The Food Pro will not operate until the Large W ork Bowl and the W ork Bowl Cover are both properly installed. Once installed, the indicator light will remain lit if the unit has power . On – Once pressed, the Food Pro will run continuously . Off – Stops the Food Pro.
17 1. Place the large work bowl onto the motor housing with the main handle to the left of the power panel. This aligns the bowl to properly engage the safety interlock. T urn the main handle to the right until it “clicks” or “locks” into place.
18 DISASSEMBL Y -MINI CHOPPER 1. Rotate the Cover to the left until the “tab” is unseated. 2. Remove the Mini Blade by pulling upward. (If the blade is held in place by ingredients, it may be removed with the Mini Chopper Bowl) 3. Remove the Mini Chopper Bowl from the Large W ork Bowl.
19 Power Pad The Food Pro will not operate until the Large W ork Bowl and the W ork Bowl Cover are both properly installed. Once installed, the indicator light will remain lit if the unit has power . On – Once pressed, the Food Pro will run continuously .
20 Hard cheese (Example: Parmesan, Romano) If the cheese cannot be pierced with t he ti p o f a s har p k ni fe, it is t oo har d to process. Do not use your Food Pro for processing. If the cheese can be pierced with the tip of a sharp knife, it is okay to continue.
21 HELPFUL HINTS 1. Never process any food that is so hard or firmly frozen that it cannot be pierced with the tip of a sharp knife Hard food can cause damage to the blade or motor . If a piece of hard food, such as carrot, becomes wedged or stuck on the blade, stop the processor and remove the blade.
22 8. When shredded or sliced food piles up on one side of the bowl, stop the processor and redistribute the food using a spatula. 9. Wh en fo od qua nt ity r eac hes th e bot tom of a slicing or shredding disc, remove the food. 10. A few larger pieces of food may remain on top of the disc after slicing or shredding.
23 OMEGA PRODUCTS, INC. Omega Model Food Pro Omega Products, Inc. 6291 L yters Lane Harrisburg, P A 17111 Omega Products, Inc. warrants this food processor to be fr ee from defects of workmanship and material under normal use and service. The food processor is requir ed to be operated solely on the electric current indicated on the unit.
24 Serial Number ___________________________________________________ Name __________________________________________________________ Address _________________________________________________________ C.
Omega Food Pro 11- Cup Direct Drive Food Processor with 4-Cup Mini Chopper INSTRUCTION MANUAL Omega Products, Inc. 6291 L yters Lane Harrisburg, P A 17111 717-561-1105 717-561-1298 fax 800-633-3401 www .
Ein wichtiger Punkt beim Kauf des Geräts Omega FoodPro (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Omega FoodPro noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Omega FoodPro - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Omega FoodPro reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Omega FoodPro erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Omega FoodPro besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Omega FoodPro verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Omega FoodPro. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Omega FoodPro gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
