Benutzeranleitung / Produktwartung ZP-500 des Produzenten Olevia
Zur Seite of 47
.
2 Index Introduction ................................................................................................................... ......................................... 4 Package Contents .....................................................
3 Reset the device ............................................................................................................................................ 41 Power on/S tandby time .................................................................
4 Introduction ZP-500 is a powerful media player which trul y decodes, playback and outputs High Definition 1080p in the market. Through the USB 2.0 port and the HDMI interf ace, ZP-500 playbacks the HD MPEG2, HD VC-1, HD A VC/H.264 movie or transport str eam from the USB flas h drive or hard disk drive to HDTV screen.
Product Overview Panel Front side LED/button/connector: (1) USB port: These two USB 2.0 type A sockets are for the external USB Fl ash Disk, USB Mass S torage, USB DVD-ROM or USB Wi-Fi Dongle. (2) IR sensor: It receives the command from remote control unit.
6 Remote Control MUTE: Mute POWER: Power on/Suspend MUSIC: Hotkey to view the music file PHOTO: Hotkey to view the photo file MOVIE: Hotkey to view the movie file RED / GREEN / YELLOW / BLUE: Special .
7 Connect There are three ways shown below to connect this pl ayer to your TV set. Please choose one to apply . Basic connection: Power Cord: Connect the DC input in the device. Audio cable output: Connect the cables to TV set. CVBS video output (NTSC or P AL): Connect to TV set.
8 Setup Please check the battery of Remote Contro l first, and then start the initial setup. Initial setup When plugged in the power at the first time, after the booting logo, the se tup p age should display to start the initial setting. The first item is the menu language.
9 The final item is to setup the aspec t ratio for your TV set. If your TV set is 4:3 then you can choose Pan Scan 4:3 or Letter Box 4:3. If you have wide-screen TV then you can choose 16:9. Use ▲▼ button to select one and press “ENTER” to confirm.
10 The menu structure and options are listed below . 1.System Select this option to open the detail setting for the system. Menu Language: Select the OSD language among Englis h, Chinese T raditional, Español, Fran ҫ ais, Deutsch, It aliano, Dutch, Pycc кий and Chinese Simplified.
11 System Info: It displays the firmware version includ ing system version, audio-firmware version video-firmware version and the TV system o f this device. 2.V ideo Select this option to open the detail setting for video display . Aspect Ratio: Select one among these options “P an Scan 4:3, Letter Box 4:3, 16:9”.
12 3.Photo Select this option to open the detail setting for the photo display . Slide Show Timing : Choose from these options “Off, 2 Seconds, 5 Seconds, 10 Seconds, 30 Seconds, 1 Minutes and 2 Minutes”. It de cides the waiting time before changing to the next photo while viewing photos.
13 Wireless LAN setup : Before configuring the WLAN network, insert the USB 802.1 1n Wi-Fi Dongle. T o setup the WLAN connection, you will go through th e steps below . In each step, setup and press “ENTER” to continue or press “RETURN” to previous step.
14 Security setup : If the key is required for accessing AP , us e the virtual keyboard on the monitor to input the key . The key must be th e same as the setting on your AP . IP Setup: Choose to use DHCP IP or FIX IP . Generally , you select DHCP IP .
15 Multimedia Jukebox Playback the media files in the ex ternal DVD-ROM or USB storage Y ou can playback the movies, music and photos in the connected USB storage via this device. Plug in the USB storage, and then press the three buttons “MUSI C, PHOTO, MOVIE” to enter the interface and playback the media f iles.
16 Movie Press “MOVIE” button to ent er the interface. In th e interface, you can use ▲▼ arrow keys to move and highlight the file titles. Press “ENTER” to op en the folder or file titl e, or press “RETURN” key to return to the previous folder .
17 ZOOM +, -: Press “+” to enlarge the video to 2X, 3X, 4X, 8X. Press “-” to recover the video to 8X, 4X, 3X, 2X, 1X and Zoom-out. When zoom the video, you can use the direction key to change the visible picture of the whole video. Note: if the edge of the video is cut in the TV screen, press the Zoom “-” to fit the screen.
18 Please change the file name of subtitle file as the same as the video file and put them in the same folder . This device detects and applies the subtitle file automatically . If you have multiple formats of subtitle file with the same file name in the same folder , this device will show the menu for you to select one to pl ay .
19 ◄◄ , ►► : Press to play fast forward or fast reverse. Press it again to swit ch the rate among “2X, 4X, 8X, 16X, and 32X”. When switching to FF 2X, the playback still comes with audio. VOLUME +, -: Press volume keys to control the volume.
20 Y ellow key : In the photo browser , press this ke y to switch to thumbnail preview . Blue key: In the browser , press it to go to the root directory . : Ban sign. When pressing the irrelevant butt on, it will be blocke d and shows this sign on screen.
21 Rot ating the photo When viewing the photos, press ◄► arrow keys to rotate from 90 to 180 or 270 degree. However , if you zoom in the photo then you cannot rotate the photo. All If the browse interface is already opened, press ◄► keys to navigate to “All” category to browse all files including Movies, Music and Photo.
22 Edit the media files In the browser window , press the “EDIT” key to open the edit window . Y ou can rename or delete the files in the browser . If you d on’t want to continue, select “Ret urn” or press “Return” key on the remote control.
23 DVD-ROM The external USB DVD-ROM is s upported. Plug in the U SB external DVD-ROM into the USB port in front of the player . If the DVD disc is loaded in the DVD-ROM, the “Disc detected” window pops up for selection.
24 Eject button: Press green key on the remote cont rol to eject the DVD-loader . Network player This player features an Ethernet port to allow it to browse and play the medi a files in the other PC via Ethernet or Wireless LAN.
25 Setup the IP Address Before using this function, you have to connect the Ethe rnet port to your network. For the network with a DHCP server such as a resi dential gateway , you can select “ DHCP IP (AUT O)”.
26 Choose the “Internet Protocol (TCP/IP)” and t hen click “Properties” button to continue. Click “Use the following IP address” and input the IP Address. The S tatic IP Address for the PC should be in the same domain as the one of the pl ayer .
27 Check the computer name and the workgroup for PC In the beginning, you need to check the comput er name and the workgroup of your PC. The computer name and the workgroup are exposed in the LAN for being browsed and accessed. Right click on the “My Computer” icon and se lect the “Properties” to continue.
28 Select the tab “Computer Name” i n the pop up window , and then check the Full computer name and the Workgroup. The computer name and the work group can be found by the other PC to browse and access. For the simplest network environm ent, we recommend choosing “WORKGROUP” as your workgroup.
29 When applying the new computer name and the new workgroup, the system will remind you to restart the system to take ef fect. Confirm it in the next two windows.
30 Setup the share folder on PC Now you can choose the folder to be shared. The shared folder can be accessed by the player or other PC in the LAN. In order to browse the media files on your PC from the player , you have to put the files in the folder and then make it to be a shared fo lder .
31 In the next window , select “Sharing” tab and check the option “Share this folder on the network” and then click “OK” to apply . Y ou can se lect multiple folders to share. Browse and play the media on your PC Now you can browse the folder on your player .
32 Generally you have an account name and password for login y our PC. In the pop up window , enter the User ID (Account nam e) and pa ssword for login. Press “ENTER” key and the keyboard screen pops up. Green Key: When you want to re-enter the User ID and the Password, press the key to pop up the window again to input them.
33 When the User ID and password are inputted, select “OK” to logi n and browse the file. For the frequent PC for sharing, select “OK & Save to My Shortcut s” to login and also add this account in the shortcut. When entering the folder , select the file to browse.
34 My Shortcut s If you add the shortcut in the previous step, you can select the shortcut to login the PC. Select /My Shortcuts/ and then you can see the shortcut you have set. Choose it to enter without re-entering the User ID and Password. If you haven’t set up the shortcut yet, you can add it manually .
35 Det ail window : When adding a new shortcut or modifying a sh ortcut, select “Detail” block to open more fields to input. There are extra fields including Label, Do main an d Host Name for enter or modify . Enter it if it is required in your network environment.
36 UPnP player Besides the network player functi on in the previous section, this player also supports the UPnP player function for easier usage. The device can read the media library on the UPnP media server . The Music, Pictures and V ideo files on the server will b e classified automatically so you can find the right kind of media files easily .
37 After the inst allation of UPnP User Interface, you need to check if the related services running in the background. Open the “Control Panel”, and “Administrative T ools”, and then the “Services”.
38 Windows Media Player 1 1 Setup (on Windows XP/Vi st a) Before configuring Media Player , make sure the network is setup and passing through Ethernet or WLAN to this computer . Open the Media Player 1 1, and click the button “Library , Media Sharing”.
39 The player should appear in the below window . Cli ck “OK” to finish. If not, please op erate the player to enter “UPNP” again and it should display .
40 Import the media files on Windows Media Player 1 1 Click the button “Library , Add to library” on Windows Media Player 1 1 to add the media information into its dat abase. The media files on the PC will be sorted by the Media Player 1 1. Please refer to Windows help for more setting.
41 Maintenance Reset the device Y ou can press “MENU” to open the setup menu. T o Reset the devic e, navigate to Setup menu and select “Restore Default” and press “ENTER”. Please refer to setup section for the details. Power on/St andby time The device needs sometime to power on.
42 Can’t use Thumbnail function Check the tab in the top. The thumbnail function can only be to ggled under “Photo” t ab. The second point is to make sure to enter the folder and browse the photo files, and then press the yellow key for thumbnail view .
43 V ideo/Audio codec support for ZP-500 Codec Feature Others File container MPEG-1 DAT, MPG MPEG MPEG-2 Up to MP@HL 1080p ISO IFO VOB MPG MPEG TS TP Divx DivX 3/4/5/6 Divx HD Divx HD Plus DIVX AVI MKV MPEG-4 MPEG-4 Visual MPEG-4 SP/ASP Xvid AVI MKV MP4 Real Video Real Video 8, 9, 10 Up to 720@30P RM RMVB AVC H.
44 (Multi-Channel) Real Audio RA1/RA-cook/RA-lossless MPEG-4 HE AACv2 LPCM 7.1 audio channel MPEG-1 Layer 3 MP3 2 channels, 8~320kbp s, VBR M3U (MP3 list) supported MP3 WMA WMA (2CH) WMA ver.
45 MPEG-4 (MP4 / A VI / MOV) DivX 3/4/5/6, Xvid (A VI / MKV) H.264 A VC (TS / A VI / MKV / MOV) VC-1 (TS / A VI / MKV / WMV) WMV 9 (WMV) Real V ideo 8/9/10 (RM / RMVB), up to 720@30p FL V (FL V) MOVIE Audio Dolby Digital AC3, DTS pass-th rough, MPEG-I Layer 1/2/3, MPEG-II Layer 1/2 multichannel, R eal Audio, MPEG-4 HE AACv2, LPCM Support 7.
46 Import ant Safety Instruction Please review the following safety prec autions. If this is the first time to use ZP-320, then read this manual before installing or using this product. If the product is not functioning properly , please contact Olevia Service Dept.
47 around the product. Ensure that there is adequate ve ntilation if the product is placed in a stand. Put the product in a properly ventilated area, away from direct sunlight or any source of heat. z Overheating: A void s tacking the product on top of a hot component such as a power amplifier .
Ein wichtiger Punkt beim Kauf des Geräts Olevia ZP-500 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Olevia ZP-500 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Olevia ZP-500 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Olevia ZP-500 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Olevia ZP-500 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Olevia ZP-500 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Olevia ZP-500 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Olevia ZP-500. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Olevia ZP-500 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
