Benutzeranleitung / Produktwartung MB290 des Produzenten OKI
Zur Seite of 100
.
MB290 Dear customer Dear customer For your security and comfort, we ur ge you to care fully read the Safety booklet before atte mpting use. In buying this multifunction m achine, you have opte d for a q uality OKI produc t. Your device sat isfies all of the differe nt needs of a modern office automation tool.
MB290 - I - Contents Contents Dear customer I Consumables I Preface 1 Laser Safety Information 1 For Europe/Asia 1 For North America 1 Positions of Safety labels on the machine 2 Symbols for the main .
MB290 - II - Contents SMS Center tr ansmission num ber 29 Sending an SMS 29 Parameters/Setup 30 Remote configuration 30 Conditions required 30 Accessing the embedded Web server 30 Date/Time 30 Summer .
MB290 - III - Contents Modifying the connectio n time(s) (Set Times type) 55 Selecting the print mode for the deposi t notice 55 Specifying an E-mail reply address 55 Printing the Internet settings 55.
MB290 - IV - Contents GDI, XPS or PCL printing 88 PostScript printing 88 PC printing via LAN/WLAN connection 89 GDI, XPS or PCL printing 89 PostScript printing 89 Specifications 90 Physical specificat.
MB290 - 1 - 1 - Preface - Environmental Information - Software use license Preface Every effort has been made to ensure that the information in this document is complete, accurate , and up-to-date. Oki assumes no responsibili ty for the results of errors beyo nd its control.
MB290 - 2 - 1 - Preface - Environmental Information - Software use license Positions of Safety la bels on the machine The device has warnin g labels at the positions shown belo w. For you r safety, you must never touch these surface s when you rem ove a pape r jam or when you replace the Toner ca rtridge.
MB290 - 3 - 1 - Preface - Environmental Information - Software use license EMC Note to users in the Un ited St ates of America This equipment has been tested and foun d to comply with the limits for a Class B digital de vice, pursuant to Part 15 of the FCC Rules.
MB290 - 4 - 1 - Preface - Environmental Information - Software use license Environmental Information.
MB290 - 5 - 1 - Preface - Environmental Information - Software use license Software use license CAREFULLY READ ALL THE TE RMS AND CONDITIONS OF THE PRESENT LICENSE B EFORE OPENING THE SEALED ENVELOPE CONTAINING TH E SOFTWAR E. OPENING THIS EN VELOPE IN DICATES THAT YOU ACCEPT THESE TERMS AND CONDITIONS.
MB290 - 6 - 1 - Preface - Environmental Information - Software use license Applicable law This license is under the Fr ench law. Any dispute following the interpretation or execution of this license will be submitted to the Paris Court.
MB290 - 8 - 2 - Installation Installation Location conditions By choosing an appropr iate location , you preserv e the lon gevity of the machine. Check th at the selected location has the following characteristics: - Choose a well ventilated location.
MB290 - 9 - 2 - Installation - Never try to modify the machine. This could ca use a fire hazard or an electric shock hazard. - Always make sure that pape r clips, staples or other small metallic it ems do not get inside the machine via the ventilation ports or other ports.
MB290 - 10 - 2 - Installation - When you disconnect the power plug from the wa ll outlet, always pull the plug ( not the cable). - Do not allow paper clips, stapl es, or other small metallic obje cts to fall inside the product.
MB290 - 11 - 2 - Installation Handling the T oner Cartridge • Must not be stood on the side, or held upside down. • Must not be shaken strongly. Rules for use symbols WARNING Indicates important safety notes. Ignoring these notes could result in serious injury or death .
MB290 - 12 - 2 - Installation T erminal description Front and Back sides 1. Control panel 2. Document feeder 3. Paper jam cover 4. Power supply cord connection 5. On/Off switch 6. LINE socket - telephone cable conne ction 7. EXT . socket - connection for external telephone devices 8.
MB290 - 13 - 2 - Installation Command panel Accessing terminal menus All terminal functions and settin gs are available via th e menu and are associated to a specific menu command.
MB290 - 14 - 2 - Installation Packaging contents The packaging contains th e items listed below: Multifunction device 1 toner car tridge 1 Installation guide 1 PC installation CD ROM and 1 Scan and Print drivers CD ROM for Mac/Linux 2 booklets (safety and warranty) 1 power cord 1 telephone cord Device installation 1 Unpack the device.
MB290 - 15 - 2 - Installation 2 Push the lower panel down until it clicks. 3 Setup the back side fee d cassette stop by pushing the "PUSH" lever ( A ). Then adjust the lateral pa per guides to the paper format by pushing leve r ( B ) located on the left guide.
MB290 - 16 - 2 - Installation Paper delivery stop Adjust the paper delivery stop , depending on the format of the document to be printe d. Do not forget to ra ise the flap to prevent the sheets from falling down.
MB290 - 17 - 2 - Installation displays the next basic setting. 1 Select the desire d language u sing the or buttons and confirm with OK . 2 To set the country, press the OK button. 3 Select your country in t he list displayed using the or butt ons and confir m with OK .
MB290 - 18 - 2 - Installation Paper insertion in the manual input tray The manual input tray allo ws you to use various paper formats with greater grammage than the one used in the paper feed cassette (refer to the paragraph Specifications , page 91).
MB290 - 19 - 3 - Copy Copy Your machine has the function to make one or more copies. You can also set up several parameters in order to make copies at your will. Simple copy In this case, the default pa rameters are applied. 1 Place the do cument to be copied in the automatic document feeder, printed face on the top.
MB290 - 20 - 3 - Copy 6 Adjust the desir ed zoom level, from 25% TO 400% with the buttons or , confirm with the OK button (only available in 1P a g et o1 copy mode). 7 Adjust the desire d origin values with the dig ital keyboard buttons or then confirm with the OK button.
MB290 - 21 - 3 - Copy 3 Confirm your choice by pressing the OK button. 4 Quit this menu by pressing the button. Zoom setup The ZOOM parameter a llows you to reduce o r enlarge an area of a document by choosing the origin an d the zoom level to apply to the docu ment, from 25 to 400 %.
MB290 - 22 - 3 - Copy Paper tray selection The Automatic selection can have two meanin gs depending on the paper format defin ed on the paper trays. The following tabl e describes the differe nt cases. 852 - ADVANCED FCT/SCAN. & PRIN T/TRAY PAPER 1 Press , enter 852 using the keypad.
MB290 - 23 - 4 - Fax Fax This chapter describe s all the fax processing and configuration functions. You will also find a section describing fax mailboxes . Fax transmission Print a header p age A header page is stored in yo ur terminal. To send your fax using this header page, you can print it a t any time and fill in your details.
MB290 - 24 - 4 - Fax T ransmission with auto redial This function allows you to monitor the dialling operation during a fax transmission. In this case, the maximum transmission rate will be 14400 bps .
MB290 - 25 - 4 - Fax To activate relay fr om your fax machine: 1 Insert the docu ment to relay. 2 Select 37 - FAX / BROADCAST . 3 Enter the remote fax number where you will relay to or choose your dialling mode and press OK . 4 Enter the rela y list number used by the remote fax and press OK .
MB290 - 26 - 4 - Fax Setting the re-direction cont act 392 - FAX / REROUTING / CALL NUMB ER 1 Press , enter 392 using the keypad. 2 Using the keys and within the navigator, select the subscriber from the direc tory. 3 Confirm with OK .
MB290 - 27 - 4 - Fax Consulting or modifyi ng the waiting queue 62 - COMMANDS / MODIFY 1 Press , enter 62 using the keypad. 2 In the waiting qu eue select the required docum ent and confirm your choice wit h OK . 3 You may now modify the parameters of the given document then confirm your mod ifications by pressing .
MB290 - 28 - 4 - Fax Modifying the features of a MBX 71 - MAILBOXES / CREATE MBX 1 Press , enter 71 using the keypad. 2 Select the desired MBX out of the 31 MBX’s, or enter the number of the MBX dire ctly and press OK . 3 Enter the code of this MBX, if there is one, and confirm with OK .
MB290 - 29 - 4 - Fax Deposit and Polling You may deposit a document in your fax and keep it available to one or more subscribers who can obtain a fax of this document by calling your fax with the POLL function.
MB290 - 30 - 5 - SMS SMS Thanks to the SMS button, you can send an SMS to subscribers all over the world. An SMS ( Short Message Service) is a service wh ich permits short written messages to b e sent to mobile phones or other SMS- compatible devices.
MB290 - 31 - 6 - Parameters/Setup Parameters/ Setup You can setup your machine as you like de pending on the use. You will find in this chapter description of the functions. You can print the fun ctions guide and th e available setup of your multifunction machine .
MB290 - 32 - 6 - Parameters/Setup Y our fax number/Y our name Your multifunction machine w ill print out your fax number and your name on each document it tran smits if you save these settings. To save your fax number and name: 22 - SETUP / NUMBER/NAME 1 Press , enter 22 using the keypad.
MB290 - 33 - 6 - Parameters/Setup Local prefix This function is used when your f ax is i nstall ed with a private network, be hind a company’s PABX. It allows you to program an additiona l automatic.
MB290 - 34 - 6 - Parameters/Setup Economy period This function allows you to defer a fax transmission to "off- peak hours" and thus reduce the cost of your communications. The economy period , via the telephone network (at off- peak hours), is preset by defa ult from 7.
MB290 - 35 - 6 - Parameters/Setup Fax or PC reception This menu, combined with a software progr am installed on your PC will enable you to select the machine you wis h to receive the documents on: •f a x , •P C , • PC if available, fa x otherwise.
MB290 - 36 - 6 - Parameters/Setup confirm with OK . 3 Enter aga in your lock code (4 digits) with the keyboard, confirm with OK . 4 Quit this menu by pressing the button. To access t he Fax serve r settings lockin g menu: 8332- ADVANCED FCT / FAX SERVER / LOCK / LOCK ACCESS 1 Press , enter 8332 using the keypad.
MB290 - 37 - 6 - Parameters/Setup 6 - EPT mode For some long dist ance calls (satellite), the on-line echo may disturb the call. 7 - COM. disp lay Choice between transm ission speed displa yed or numb er of the page in prog ress.
MB290 - 38 - 6 - Parameters/Setup 82 - Form lines This parameter le t s you set the number of lines per page. This variable is linked to the PJL variables: P APER and ORIENT A TION. If you modify one of these variable s, the Form Lines variable is automatically up dated (only for the print job in pr ogress) to respect the same sp acing.
MB290 - 39 - 6 - Parameters/Setup Printing the functions guide 51 - PRINT / FUNCTIONS LIST Press , enter 51 using the keypad. The printing of the f unctions guide starts. Printing the logs The incoming and outgoing logs list the last 30 transmissions (incoming and ou tgoing) made by your machine.
MB290 - 40 - 6 - Parameters/Setup Lock the numbers This function locks dialling and the numerical keypad is disabled. Transmissions ar e only possible from numbers included in the dire ctory. To access the number interlockin g option: 813 - ADVANCED FCT / LOCK / LOCK NUMBER 1 Press , enter 813 using the keypad.
MB290 - 41 - 6 - Parameters/Setup Printed p ages counter To view the number of pages printed on your machine: 824 - AD VANCED F CT / COUNTERS / P RINTED PG 1 Press , enter 824 using the keypad. 2 The number of printed pages appears on the screen.
MB290 - 42 - 7 - Directory Directory Your multifunction machine le ts you create a director y by memorising subscr iber records and su bscriber lists. Your machine can store up to 250 subscrib er records, which you can group in 20 subscribe r lists. For all subscriber records or subscriber lists you may create, consult, modify or delete c ontents.
MB290 - 43 - 7 - Directory Creating subscribers list To create subscribers list: 12 - DIRECTOR Y / NEW GROU P 1 Press , enter 12 using the keypad. 2 Enter the LIST NAME with the alphanumerical keypad (20 characters maximum) , confirm with OK .
MB290 - 44 - 7 - Directory Example: Smith;0123456789; jsmith@isp.co.uk;J;8 Jones;01987654 321;;@;8 O'Connor;0123469874 ;d.oconnor@hello.net;U;8 The rate is coded on a numb er, see the following board: How to a import a directory To import a directo ry: 17 - DIR ECTORY / IM PORT 1 Press , enter 17 using the keypad.
MB290 - 45 - 7 - Directory LDAP Server The LDAP server allows you to access a director y server, for contacts or lists of cont acts (maximum 500 recipients). The LDAP function can be switched on only once there are at least 50 free entr ies in the multifunction machine's local directory.
MB290 - 46 - 8 - Games and Calendar Games and Calendar Sudoku Sudoku is a Japanese puzzle. The game is in a grid format of three sq uares by three squa res to be distributed in fields in zo nes of 3 × 3. Depending on the level of difficulty, more or fewer numbe rs are already entere d at the start of the game.
MB290 - 47 - 9 - Network features Network features You may connect your multifunction term inal to an Ethernet or a wireless ne twork. However, practical knowledge of your computer configuration is required to set up a network.
MB290 - 48 - 9 - Network features 2718 - SETUP / LAN ETHER / PARAMETERS / WINS SRV. 1 2719 - SETUP / LAN ETHER / PARAMETERS / WINS SRV. 2 1 Enter the IP a ddress of each server, and p ress OK to confirm.
MB290 - 49 - 9 - Network features WLAN network You can connect your machine to a PC using a USB cable or make a wireless conne ction (via radio) with a PC or network.
MB290 - 50 - 9 - Network features Connect your WLAN adaptor Your machine belongs to a new gene ration of ter minals that you can incorporate into a WLAN n e twork using a WLAN USB key.
MB290 - 51 - 9 - Network features - If you choose WPA , enter the WPA or WPA2 key that you are using on your network. 8 IP CONF.: MA NU or IP CONF.: AUTO appear on the screen. If you choose to set up th e system manually, go to the next paragraph and ente r the parameters IP ADDRESS, SUBNET MASK and GATEW AY.
MB290 - 52 - 9 - Network features 2827 - SETUP / W LAN / PAR AMETERS / SECURITY This parameter allows yo u to make your network secure by setting the encryption method to use in your WLAN network. 1 Type in , select the menu SETUP using the key s or and confirm with OK .
MB290 - 53 - 9 - Network features Setting up the P C For this section, refer to th e instru ctions supplied by the manufacture r of the WL AN USB key to help you to find and join the "house " network. 1 You may need to install th e software for t he WLAN USB key on the PC, if this has not already been done.
MB290 - 54 - 10 - Message service Message service Your multifunction machine lets you send and receive emails via your local network. To do so, you must connec t your machine to a local network.
MB290 - 55 - 10 - Message service 10 Enter the name of the at tachment and va lidate with OK key. 11 If necessary, change the attachmen t format: PDF or IMAGE and validate with OK key. 12 If you are using the flatbed scanner, you can scan more than one page.
MB290 - 56 - 10 - Message service Connection configuration The settings are div ided into severa l categories: •t h e standard settings de fine the connection type and frequency to the local netwo r k as well as the transmission type for yo ur documents, •t h e E-mail sorting defines treatment for all stored E- mail messages received.
MB290 - 57 - 10 - Message service 96 - E-MAIL / SORT MESSAGES F@X Only mode 1 Select option F@X ONLY and press OK to confirm. All E-Mails are polled and pr inted. PC Only mode 1 Select option PC ONLY and press OK to confirm. The E-mails are neither polled nor printed and they may be used with a comp uter.
MB290 - 58 - 11 - USB memory key USB memory key You can co nnect a USB mem ory Key on th e front side of your machine. The files stored in TXT, TIFF, PDF (versio n 1.
MB290 - 59 - 11 - USB memory key Select the printing form at (for JPEG files): A4 or LETTER (depending on model), or PHOTO and confirm with OK . Select the pr inting format: THICK or NORMAL and confirm with OK to start printing. 5 Quit this menu by pressing the button.
MB290 - 60 - 11 - USB memory key The beginning button immediately star ts the scan and sends a file to the sup port with the parameters defined in the an alysis format. Important With the IMAGE format, if you have selected: • BLACK&WHITE , the picture will be saved in TIFF format.
MB290 - 61 - 12 - PC Features PC Features Introduction The Companion Suite Pro software allows the connection of a personal computer with a compatible multifunction machine.
MB290 - 62 - 12 - PC Features 6 The welcome screen appears. Click on the N EXT button to launch the installation of the Companion Suite Pro in your PC. 7 To continue, you nee d to accept the proposed license agree ment. 8 Click on the N EXT button. 9 The final installation is r eady to be executed.
MB290 - 63 - 12 - PC Features 7 The welcome screen appears. Click on the N EXT button to launch the installation of the Companion Suite Pro kit on y our PC. 8 To continue, you nee d to accept the proposed license agree ment. 9 Click on the N EXT button.
MB290 - 64 - 12 - PC Features To connect the multifunction machine to the PC via the local network (LAN/WLAN), refer to pa ragraph Addin g a device connected to the ne twork , page 66. Inst alling the dr ivers manually You can install the pr inter and scan drivers ma nually without running any setup softwar e.
MB290 - 65 - 12 - PC Features When asked for the drivers, insert the installation CD- ROM. The drivers ar e detected automa tically. Installing PostScript print drivers If you want to install Post script print drivers for your multifunction machine, proceed as follow s: 1 Connect to the Adob e website ( http:// www.
MB290 - 66 - 12 - PC Features From this screen you can monitor the informa tion or configure your multifunction machine from th e tabs: • D EVICE SELECTION : Displays the list of devices managed by the PC. • C OMPANION : Presents the multif unction machine screen.
MB290 - 67 - 12 - PC Features 7 Enter a registration name for your PC and click OK . The multifunction machine will use this name to identify your PC. 8 Click on the OK button . 9 Select the desired print language for your printer and click on N EXT .
MB290 - 68 - 12 - PC Features 5 A message informs yo u when the connection is established. Click OK twice. 6 Enter a registration name for your PC and click OK . The multifunction machine will use this name to identify your PC. 7 Click on the OK butt on .
MB290 - 69 - 12 - PC Features 4 Select the desi red O UTPUT format in the drop-down menu. 5 Click OK to confirm the new parameters. Removing a device 1 Select the device from the list and click the minus sign or R EMOVE button. 2 To confirm the removal of the device, click Y ES .
MB290 - 70 - 12 - PC Features Links available for connected netwo rk devices The L INKS tab lets you access various configuration utilities from the mach ine’s embedded website.
MB290 - 71 - 12 - PC Features To scan a document from PaperPort: 1 Click on F ILE > S CAN . 2 Select the desired scanne r, document feeder or flatbed. 3 Customise the advan ced properties of th e digitisation by clicking on the A DJUST THE QUALITY OF THE SCANNED PICTURE link.
MB290 - 72 - 12 - PC Features 3 Check the Duplex box and choose among the two binding modes: 4 Click on the OK button to begin printing. 5 The machine prin ts the odd pages (from the higher odd page t.
MB290 - 73 - 12 - PC Features Address book The address book enables yo u to store the numbers of the contacts you call the most fre quently. The purpose of this function is to facilitate dialling your contact’s number when you want to send an SMS or fa x.
MB290 - 74 - 12 - PC Features Modify the information related to a contact 1 Select the contact whose data yo u want to modify, using the mouse. 2 Click on P ROPERTIES . 3 Make the necessa ry changes in the window A DDRESS BOOK . 4 Click on OK . Modify a group 1 Select the gro up in the address book list.
MB290 - 75 - 12 - PC Features Send a fax Send a fax from the hard disk or the terminal 1 Click the icon of the window C OMPANION D IRECTOR . 2 Click N EW then click FAX .
MB290 - 76 - 12 - PC Features Receive a fax The wind ow Companion Manager an d Companion Director show, using d ifferent messages, the reception of a fax. The ico n is displayed at the bottom of the window Companion Manager and the ico n appears in the task bar.
MB290 - 77 - 12 - PC Features Fax p arameters Access to fax parameters 1 Click on the icon of the window C OMPANION D IRECTOR . 2 Select T OOLS >O PTION >F AX . 3 Make the adjustments required , referring to the description o f parameter s below and click OK .
MB290 - 78 - 12 - PC Features Cover page The cover page is part of a fax document au tomatically generated by your terminal, on which ther e is information concerning the sender, the recipient, the date, the time sent, comments, etc... This page may b e sent alone or in front of a fax document, but always at the same time as the docu ment.
MB290 - 79 - 12 - PC Features • Option ( B ): Launch C OMPANION M ANAGER , select N EW F AX , select the scanner source as shown be low: Add any recipient to the reci pient list, click on the tab A DVANCED O PTIONS , select re solution F INE as shown below: Finally click on the button S AVE AS DRAFT in the lower right corner (floppy disk icon).
MB290 - 80 - 12 - PC Features 3 Click on the icon to display the available fields. To add a field, proceed as follows: - Select the field you want to insert by clicking the field palette. A stam p replac es the cursor of your mouse. - Click the location where you want to put the field on the model.
MB290 - 81 - 12 - PC Features SMS Communications From your PC, you can send SMS to a single recipient or to multiple recipients using the distribution groups. Communications being sent a re monitored by me ans of the outbox, the outbox log and the o utbox memory (it ems sent).
MB290 - 82 - 12 - PC Features Follow-up of SMS SMS communications are monitor ed by means of: • an outbox, • a sent item me mory, • an outbox log. These services make it possible to have complete information on the terminal activity with regard to communications.
MB290 - 83 - 12 - PC Features Software Uninstallation This section describes th e following procedures: • full uninstallation of the Companion Suite Pro softwar e, • uninstallation of the driver s only. Uninst all the sof tware from your PC Turn your PC on.
MB290 - 84 - 12 - PC Features 5 Select the OKI MB290 driver and click on the R EMOVE button. 6 Select the option R EMOVE DRIVER AND DRIVER PACKAGE and click on the OK button. 7 A confirmation screen appears. Click on the Y ES button to continue. 8 Click on the D ELETE button to conf irm the removal.
MB290 - 85 - 13 - Maintenance Maintenance Service General information To ensure that you r machine is kept in the best conditions, it is recommended tha t you periodically clean the inner parts. Please respect the following rules while using this machine: - Do not leave the scanner cover open.
MB290 - 86 - 13 - Maintenance A wait message appears. The smar t card is read. 9 Remove the smar t card from the r eader, your machine is ready to print again.
MB290 - 87 - 13 - Maintenance Printer issues Error messages When the printer encou n ters any of the pr oblems described below, th e corresponding me ssage is shown on the machine display. Paper jam When printing, a sheet of paper may get stuck in the printer or the paper tray and cause a paper jam.
MB290 - 88 - 13 - Maintenance Scanner issues When a paper jam occurs, the following message appears: 1 Open the document feede r scanner cover. 2 Remove the jammed pa per without tearing it. 3 Close the docu ment feeder scanner co ver. 4 Press . Miscellaneous issues When turning on the ter minal, nothing is displayed on the screen .
MB290 - 89 - 13 - Maintenance Code 06 - Printer default An incident occurr ed in the printe r: no paper, paper jam, opened cover... In th e reception mode, this incident appears only if the recept ion parameter is switched to W ITHOUT P APER . Code 07 - Disconnected The link has been cut (bad line).
MB290 - 90 - 13 - Maintenance PC printing via LA N/WLAN connection GDI, XPS or PCL printing PostScript printing No paper fe ed The printing o f the document is cancelled. Paper jam Paper format problem T oner empty The printing o f the document is cancelled.
MB290 - 91 - 13 - Maintenance Specifications Physical specifications Electrical specifications Environment al specifications Peripheral specifications Printer Copier Scanner Printing supports Dimensions: 412 x 447 x 386 mm Weight: 13 kg Power supply (see rating plate): Sin gle phase 120 V - 50/60 Hz - 8.
MB290 - 92 - 13 - Maintenance PC connection Specifications are subject to cha nges for improvement without notice. Slave USB 2.0 port (PC con nection) Master USB 2 .
Oki Systems (UK) Limited 550 Dundee Road Slough Trading Estate Slough, SL1 4LE Tel:44 (0) 1753 819819 Fax:44 (0) 1753 819899 http://www.okiprint ingsolutions.co.uk Oki Systems Ireland Limited The Square Industrial Com plex Tallaght, Dublin 24, Ireland Tel:+353 1 4049590 Fax:+353 1 4049591 http://www.
OKI Europe Ltd. (Ukraine) 20, Velyka Zhytomyrska Street “Panorama” Business Centre 5th Floor Kiev 01025 Tel: +380 44 537-52-88 e-mail: info@oki.ua Website: www.oki.ua Oki Sistem ve Yazıcı Çözümler i Tic. Ltd. Ști. Harman Sokak , No:4, Kat:6, 34 394, Levent, Istanbul Tel : +90 212 279 2 393 Fax : +90 212 279 2366 http://www .
07099901 iss. 2.
Ein wichtiger Punkt beim Kauf des Geräts OKI MB290 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie OKI MB290 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für OKI MB290 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von OKI MB290 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über OKI MB290 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon OKI MB290 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von OKI MB290 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit OKI MB290. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei OKI MB290 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
