Benutzeranleitung / Produktwartung B6200 Series des Produzenten Oki
Zur Seite of 66
.
2 > PREFA CE PREFACE Eve r y e ffor t ha s bee n m ade to ensur e th at the in f o rmat io n in th i s docu m ent is co mple te, accura te, and up - to -date. Th e manuf acturer a ssumes no r esponsib ilit y for the resu lts o f errors beyond i ts co ntrol.
FCC STAT EMENT > 3 FCC S TAT EMENT Federal C ommunicati ons Commis sion Rad io Frequency Inter ference Statement for 120-Volt Models. This equipment has been tes ted and f ound to comply with the li mits for a Class B digi tal device, pursuant to Part 15 of the FCC rules.
4 > F CC STATEME NT CONTENTS Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . .
CONTENTS > 5 Setting printer configurations via a Web page . . . . . . . . . . . . 47 Using Online Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Installing the printer driver . . . . . . . . . . . . . . . . . . . . . . . . . 48 Microsoft Windows Systems .
6 > INTRODUCTION INTRODUCTION W ELCOME Thank you f or choosi ng an Ok i B6200/B 6300 Se ries pr inter. Thi s is a guide to h elp you s et up, install an d operate y our prin ter. To und erstand its features fully and to use the prin ter correctly and effectively, please read this guide be fore using the printer.
INTRODUCTION > 7 FEATURES OVERVIEW A brief over view of the main feat ures of yo ur printer is give n here: • Multiple up pri nting • 2-sided printin g • W atermark printing • Poster printi.
8 > ABOUT THIS GUI DE ABOUT THIS GUIDE CONVENTIONS Throughou t this gui de, the four sides of the printer are referred to as front , rear, right and left. Standing at the fr ont of the printer you can view the control panel and the rear of the printer is opposite the front.
INSTALLATION AND RELOCATION PROCEDURE > 9 INSTALLATION AND RELOCATION PROCED URE The following sections guide you through the process of installing and setting up your printer right through to making a test print from an application. Complete the entire installation procedure to ensure a proper installation .
10 > INSTALLATION AND RE LOCATION PROCEDURE CHECKING THE PA CKAGE CONTENTS Check that all items li sted below are in cluded in th e p rinter pack aging . I f any items ar e missing or dama ged, contact yo ur dealer. •P r i n t e r • Drum-ton er cartrid ge (for approximate ly 6,0 00 Letter pages at 5% coverage, i.
INSTALLATION AND RELOCATION PROCEDURE > 11 LOCATING PARTS OF T HE PRINTER The main par ts of the p rinter and a bri ef des cription of th eir funct ions are shown b elow : No. Name Description 1 Center outp ut t ray Print jobs are ou tput here wit h pri nte d sid e fa ci ng down.
12 > INSTALLATION AND RE LOCATION PROCEDURE PREPARING A LOCATION FOR THE PRINTER Place the machine on a level an d stur dy s urface that can withstand the machine weig ht – 20. 4 kg (4 5lb) (B6 200) or 22.6 k g (50lb) (B630 0). If tilted, the machine may fall ov er and cause injuries.
INSTALLATION AND RELOCATION PROCEDURE > 13 • T emperature ran ge 10 – 32 °C (50 – 89 °F), h umidity range 15 – 85% (no co ndensa tion). Humidity s hould b e 70% o r belo w at 32 °C (89 ° F), and te mperature should be 28°C (82 °F) or below a t 85% humidi ty .
14 > INSTALLATION AND RE LOCATION PROCEDURE INSTALLING THE FACE U P (REAR) T RAY You can install the face u p (rear) tr ay on this printer if r equired. 1. Insert the right and left tabs of the face up (rear) tray into the holes at the back of the printer (1), an d lower the tray into position (2 ).
INSTALLATION AND RELOCATION PROCEDURE > 15 INSTALLING TH E OPTIONAL ACCES SORIES If you have purchased any optional accessories, install th em before setting the drum-to ner cartridge an d before load ing paper.
16 > INSTALLATION AND RE LOCATION PROCEDURE INSTALLING A U NIVERSAL T RAY You can ins tall up to tw o l evels of universal tray (5 50-sh eet) optio n to this printer.
INSTALLATION AND RELOCATION PROCEDURE > 17 2. Place the tray module to be installed at th e bottom level on a f lat surface, then pu ll out the paper tray . 3. Lift the tray module to be installed at the top level by holding the parts as show n in the diagram.
18 > INSTALLATION AND RE LOCATION PROCEDURE 5. Insert the fasteners provided into the two locations insid e the tray module and the two locations at the back of the tray module.
INSTALLATION AND RELOCATION PROCEDURE > 19 6. Pull the paper trays out of the printer . 7. Lift up the pr inter by ho lding the recessed areas . 8. Align the corners of the printer and the tray mod.
20 > INSTALLATION AND RE LOCATION PROCEDURE 9. Insert the fasteners provided into the two locations insid e and the two locations at the back of th e printer . Insert the fasteners securely . 10. Push both trays completel y into the printer . NOTE For deta ils on ho w to load paper, ref er to “Loadin g paper” on page 40 .
INSTALLATION AND RELOCATION PROCEDURE > 21 INSTALLING TH E DUPLEX UNIT You can install a dup lex unit option on this printer. If a face up tray has been fitted, rem ove it b y reversi ng the step s in “Installing the Face Up (Rear) T ray” on page 14 before install ing the duplex unit and re fit it when the duplex unit has been in stalled.
22 > INSTALLATION AND RE LOCATION PROCEDURE 3. T ighten the screws at both ends of the bottom of the duplex unit..
INSTALLATION AND RELOCATION PROCEDURE > 23 INSTALLING TH E OF FSET CATCH T RAY You can install an of fset catch tray option on this printer. 1. Lift the second lever on the top le ft corner at the back of the printer (1), and open the cover (2). NOTE An offset catch tray can b e installed on the B6300 o nly.
24 > INSTALLATION AND RE LOCATION PROCEDURE 2. Loosen the right and l eft thumb screws as shown in t he diagram to uninstall the top cover of the paper exit. 3. Insert the right and left tabs of the of fset catch tray into the holes at the top of the printer (1) and lower it slo wly onto the top of the printer (2).
INSTALLATION AND RELOCATION PROCEDURE > 25 5. Close the cover . 6. If you install the face up (rear ) tray on the printer , affix the label provided to the back of the o ffset catch tray . 7. Pull out the extension tray . 8. Flip up the st opper wh en printi ng on heavy weight papers.
26 > INSTALLATION AND RE LOCATION PROCEDURE INSTALLING A N ETWORK SOFTWAR E KIT, HARD DISK, COMP ACT FLASH DISK, OR ADD ITIONAL MEMORY The same steps are r equired at the beginning and at the end of each installation to prepare the printer and to clo se it.
INSTALLATION AND RELOCATION PROCEDURE > 27 3. Remove the two screws on top of the me tal cover (1), and pull the metal cover upwar ds (2). Closing th e pri nte r 1. Align and insert the protrusion at the bottom of the metal cover into the notch of the printer (1), and tighten the two screws on the top of the co ver (2).
28 > INSTALLATION AND RE LOCATION PROCEDURE INSTALLING A N ETWORK SOFTWAR E KIT You can install a network so ftware kit option on this printer. Installin g this option may initialize the s ettin gs of [Network/Port] and [Allocate Memory]. 1. Refer to “Preparing the prin ter” on pag e 26 .
INSTALLATION AND RELOCATION PROCEDURE > 29 Inserting the network software kit fully and securely into the slot will cause the hook on the top of the slot to rise. 5. Remove the cap from the network connector . 6. Refer to “Closin g the printer” on page 27 .
30 > INSTALLATION AND RE LOCATION PROCEDURE INSTA LLING A HARD DISK You can inst all a hard di sk opti on on th is printe r. 1. Refer to “Preparing the prin ter” on pag e 26 . 2. Remove the screws on the rig ht and left sides of the Compact Flash bracket (1 ) and remove th e Compact Flas h disk drive as shown i n the diagr am (2).
INSTALLATION AND RELOCATION PROCEDURE > 31 4. Connect the cable of the hard disk to the connector on the printer as shown in the diagr am. 5. Hold the hard disk as shown in the diagram, and install it in the printer .
32 > INSTALLATION AND RE LOCATION PROCEDURE INSTALLING A C OMPACT FLASH DI SK You can install a Compact Flash disk option (only available in certain regions) to this printer. 1. Refer to “Preparing the prin ter” on pag e 26 . 2. Open the fastener on the Compact Flash disk drive.
INSTALLATION AND RELOCATION PROCEDURE > 33 4. Close the fastener . 5. Refer to “Closin g the printer” on page 27 ..
34 > INSTALLATION AND RE LOCATION PROCEDURE INSTALLING AD DITIONAL MEMORY The additional memory module for this printer is 512MB. 1. Refer to “Preparing the prin ter” on pag e 26 . 2. Hold the additional memory so that the notch (1) is aligned with the pro trusion on th e slot.
INSTALLATION AND RELOCATION PROCEDURE > 35 INSTALLING THE DRUM -T ONER CARTRIDGE When handli ng the dr um-toner car tridge, take note of the fol lowing points: • Do not subject the drum- toner car tridge to direct sunlight or strong light.
36 > INSTALLATION AND RE LOCATION PROCEDURE • It is recommended to use up the drum-toner cartridge within one yea r of re m ovi ng it from its packaging.
INSTALLATION AND RELOCATION PROCEDURE > 37 3. Place the drum-toner cartridge on a f lat surface and pull out th e seal horizonta lly . 4. Hold the drum-toner cartridge by the grip and insert it into the slot inside the p rinter . 5. Close the cover securely .
38 > INSTALLATION AND RE LOCATION PROCEDURE CONNECTING AN INTERFACE CABLE Connect the interface cable to b e used to the pr inter. 1. Connect the interface cable to th e interface connecto r at the back of the printer : serial (1), USB (2), networ k (3), parallel (4 ).
INSTALLATION AND RELOCATION PROCEDURE > 39 CONNECTING THE POWER CORD When connecting the po wer cord, take heed of th e information given in “Safety precautions” o n page 9 . 1. Ensure that the printer power switch is in the < ¡ > posit ion.
40 > INSTALLATION AND RE LOCATION PROCEDURE LOADING PAPER This section explains how to load Letter size plain paper in portrait orientation in the paper tray. 1. Place the paper tray on a flat surface an d remove the lid. 2. If the base plate of the paper t ray is rai sed, push it down.
INSTALLATION AND RELOCATION PROCEDURE > 41 3. Squeeze the length guide and slide it to the desired p aper s ize (1). Squeeze the right width guide and slide it to the desi red pap er size (2) . 4. Load the paper wi th the side to be pri nted facing up and w ith all four corn ers ali gned.
42 > INSTALLATION AND RE LOCATION PROCEDURE 5. Close the lid of the paper tray and push the tray completely int o the printer . 6. Depending on t he types an d si zes of the loaded paper , you need to configure s ettings on the co ntrol panel .
INSTALLATION AND RELOCATION PROCEDURE > 43 THE CONT ROL PAN EL AN D MEN U SYSTE M For full details on the control panel and menu stru ct ure, refer to the Reference Guide. The control panel co mponents and th eir f unctions are des cribed bel ow: No.
44 > INSTALLATION AND RE LOCATION PROCEDURE NAVIGATING THE CON TROL PANEL MENUS When you p ress the MENU button on the co ntrol panel , you enter the printer’s menu sy stem. At that point, the first line of the display contains the text [ Menu], indi cating that you are in the menu system.
INSTALLATION AND RELOCATION PROCEDURE > 45 SELECTING THE CONTROL PANE L LANGUAGE English is the defaul t langua ge for all error and status messages; however, these messages ar e also available in many langu ages. Use the fo llowing procedure t o change the di splay lan guage.
46 > INSTALLATION AND RE LOCATION PROCEDURE PRINTING A CONF IGURATI ON SUMMARY To check whether the printer is correctly installed, use the control panel to print the [System Settin g s List]. 1. Press the <MENU> butt on to dis play th e Menu screen.
INSTALLATION AND RELOCATION PROCEDURE > 47 SETTING PRINTER CONFIGURATIONS VIA A W EB PAGE If you are working in a TCP/IP-enabled environment, you can us e a web browser to display t he prin ter or j ob printi ng statu s and to chang e the settings.
48 > INSTALLATION AND RE LOCATION PROCEDURE INSTALLING THE PRINTER DRIVER To print from the computer, install the printer driver and other required software. The installation procedu re(s) you will use for yo ur printer vary accor ding to operating syst em, us age of the USB port, and net work connect ion.
INSTALLATION AND RELOCATION PROCEDURE > 49 11. Dr ivers are copied. Click Finish . I f Conn ect cable screen displ ays . Clic k Fin ish . 12. Sw itch y our pri nter ON . If the New Ha rdware Fo und Wizard di splays : 13. Wi n 9 8 : sel ect “Search for th e best driver for your device”, s elect CD-ROM drive, clear oth er choices.
50 > INSTALLATION AND RE LOCATION PROCEDURE INST ALL PRINT ER SO FTWARE UTI LITIES W ith the Software Installa tion screen open, click the Sof tware Utilities button. Select and ins tall th e util ities you want following the on-screen instruction s.
INSTALLATION AND RELOCATION PROCEDURE > 51 MACINTOSH - OS 9.1+ INSTALL THE DRIVER 1. Turn on the pr inter , then turn on the compu ter . 2. Place the Drivers CD supplied with your printer into the CD-ROM dr iv e. 3. Double-click the CD icon that appear s on the desktop.
52 > INSTALLATION AND RE LOCATION PROCEDURE 6. Make sure the Printer Descriptions folder is selected in the drop-do wn bo x. 7. Highlight y our prin ter mod el, cli ck Select . 8. Under USB Printer S election , click Ch ange . 9. Highlight y our prin ter mod el, cli ck OK .
INSTALLATION AND RELOCATION PROCEDURE > 53 MACINTOSH - OS X.1+ INSTALL THE DRIVER Note: Be sur e to s witch of f antivirus software befo re in stalling a printer driver. 1. Turn on the pr inter , then turn on the compu ter . 2. Place the Drivers CD supplied w ith the printer in th e CD-ROM driv e.
54 > INSTALLATION AND RE LOCATION PROCEDURE ADDING THE PRINT ER FOR A NETWORK 1. Run the Print Center ( Local HD → Applications → Utilities → Pri nt C ent er ). 2. Click Printers fro m the menu bar . 3. Click Add Printer . 4. Select App letalk from the drop down menu.
INSTALLATION AND RELOCATION PROCEDURE > 55 6. Click Apply C h ange s . 7. Close the Print Cent er . Y our printer is availabl e under Mac O S X.1 ap plic ations . T O PRINT A JOB USING THE OPTI ONAL DUPLEX UNIT 1. From your application, click File → Print → Co pies & Pages → Duplex .
56 > IF PAPER JAMS IF PAPER JAMS Guided by th e message on the co ntrol panel, open the cover an d remove the jammed paper . If paper is torn, ch eck for any remain ing torn pieces of paper.
IF PAPER JAM S > 57 Cover B : Open Cover B (For B 6300, raise the lever as sho wn in the diagr am and open cover B (1) ). Aft er op eni ng cover B, ho ld t he part mar ked with a *, open the cover of the fus er unit (2) and remo ve any jamme d paper.
58 > IF PAPER JAMS Cover D Offset catch tray: Paper Tray: Pull ou t the tray and follow the pro cedure to re move paper . Refer t o “Insid e the Paper Tray” on page 59 .
IF PAPER JAM S > 59 3. Return the drum-toner cartridge and Cover A to their original posit ions. INSIDE THE PAPER T RAY Follow the procedure below to remove any jammed paper when the following messag es are displayed intermitt ently: [Pull out all trays.
60 > IF PAPER JAMS After removing the pa per: 1. Push the paper trays completely back into the printer . 2. Open and close Cover A to clear the error mes sage.
ERROR MESSAGES > 61 ERROR MESSAGES If an error message is displayed at the control panel, follow the instruct ions to fix t he er ror. Depe ndi ng on the message content, follow the instructions in the Reference column below to fix the error. The following section exp lains the co ntents and actions r equired for the more compl ex messa ges.
62 > ERROR MESSAGES Off-line Off-line Data in memory The p rin ter is o ff-l ine, p r o bably becau se the <O N LINE > butt on has been pre s sed. T o cancel the off-lin e sta tu s, press the <ON LINE> button aga in. The pri nter cann ot recei ve any pri nt data fr om th e compu t er whil e it is off-line.
INDEX > 63 INDEX A arrow bu ttons .......... ....... ....... ....... ........44 C Condens a tio n Pro blem s Occu r ............13 connec ting in terface c ables ......... ........38 Connect ing p ower cord .... ........... ........39 E Error Mes sag es (cont rol pa n el) .
64 > LIMITED WARRANTY: UNITED STATES AND CANADA LIMITED W ARRANTY: UNITED STATES AND CA NADA Oki Data Americas, Inc. (Oki Data) warrants this printer to be free from defects in material and workmanship and will remedy any such defect according to the term s of this Limited Warranty.
LIMITED WARRANTY: UNITED STATES AND CANADA > 65 To make request o r claim for servi ce under th is Limited Warranty con tact your local Oki Data autho rized service center o r Oki Data at 1-800-OKI -DATA (1-800 -654-3282 ).
66 > OKI DATA AMERICAS SERVICE CENTERS OKI DATA AMERICAS SERVICE CENTERS UNITED STATES Oki Data Americas Inc. 2020 B ishop s Ga te Blv d. Mt. L a u rel, NJ 08 054, USA Tel: 1 -800-6 54-328 2 Fax: 1-8 56-22 2-52 47 CANADA Oki Data Americas Inc. 2735 M athes on Blv d.
Ein wichtiger Punkt beim Kauf des Geräts Oki B6200 Series (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Oki B6200 Series noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Oki B6200 Series - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Oki B6200 Series reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Oki B6200 Series erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Oki B6200 Series besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Oki B6200 Series verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Oki B6200 Series. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Oki B6200 Series gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
