Benutzeranleitung / Produktwartung NTTL11994 des Produzenten NordicTrack
Zur Seite of 33
Patent Pending Model No. NTTL11994 Serial No. Find the serial number in the location shown below. Write the serial number in the space above for reference.
TABLE OF CONTENTS IMPORTANT PRECAUTIONS ................................................................. 3 BEFORE YOU BEGIN ....................................................................... 5 ASSEMBLY ...........................................
IMPORTANT PRECAUTIONS WARN ING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill.
22. When using iFIT.com CD's and videos, an electronic "chirping" sound will alert you when the speed and/or incline of the treadmill is about to change. Always listen for the "chirp" and be prepared for speed and/or in- cline changes.
BEFORE YOU BEGIN Thank you for selecting the revolutionary NordicTrack ® EXP2000 treadmill. The EXP2000 treadmill combines advanced technology with innovative design to help you get the most from your exercise program in the convenience of your home.
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver _ and wire cutters _- _.
4. Place one of the Handrail Spacers (65) on the right Upright (69) as shown, with the cutout toward the tread- mill(see inset drawing A). Pull the Upright Wire Harness (98) up through the Handrail Spacer. Place the other Handrail Spacer on the left Upright (not shown).
OPERATION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM, a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form.
o o ° ° ° ° ° ° ° ° o o F Program Display o o o TRAINING ZONES 1 o ' ' T i WA_IU P / COOL-DOWN A :_U_N _UU_A_C P_r O_MA_C INC IN _ SELJ%EN ]IM _ _IS AN( _ EAR[ RAE _ SP_) o "-&.
A.= CAUTION: Before operating the console, read the following precautions. • Do not stand on the walking belt when turn- ing on the power. • Always wear the cli p (see the drawing below) while operating the treadmill. • Adjust the speed in small increments to avoid sudden jumps in speed.
HOW TO USE THE MANUAL MODE _ Follow your progress with the LED track and the displays. _1 Insert the key fully into the console. See GETTING STARTED on page 10. F,I Select the manual mode. When the key is in- serted, the manual mode will be selected and the Manual indica- tor will light.
D Speed/Pace display-- This display shows the speed of the walking belt and your current pace (pace is mea- sured in minutes per mile). Every seven seconds, the display will change from one number to the other. Note: The console can display speed and dis- tance in either miles or kilometers.
Each program is divided into several time seg- ments of different lengths. The Time display shows both the time remaining in the program and the time remaining in the current segment. One speed setting and one incline setting are pro- grammed for each segment.
HOW TO CREATE CUSTOM PROG MS B B Insert the key fully into the console. See GETTING STARTED on page 10. Select one of the custom programs. When the key is in- serted, the manual mode will be selected and the Manual indica- tor will light.
HOW TO USE CUSTOM PROGRAMS _! Insert the key fully into the console. See GETTING STARTED on page 10. B Select one of the custom programs. When the key is in- serted, the manual mode will be selected and the Manual indica- tor will light. To select one of the custom pro- grams, press the Select Learn Indicator OOOOOO@O OOOOOO@O A_.
HOW TO USE THE FITNESS TEST PROGRAM The fitness test program is designed to measure your relative fitness level. For the best results, the fitness test program should be used at a time when your en- ergy level is high; the fitness test program should not be used if you have already exercised during the day.
When the cool-down segment is completed, the walking belt will slow to a stop. After the fitness test program is com- pleted, your fitness level will be shown in the Time display. There are ten fitness levels-- fitness level 10 (FL:10) is the highest.
_ ress the Start Program button or the Speed + button to start the program. A moment after the button is pressed, the tread- mill will automatically adjust to the first speed and incline settings for the program. Hold the handrails and begin walking. Each program is divided into several time segments of different lengths.
HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER To use iFit.com CD's, the treadmill must be con- nected to your portable CD player, portable stereo, home stereo, or computer with CD player. See pages 19 and 20 for connecting instructions.
HOW TO CONNECT YOUR HOME STEREO HOW TO CONNECT YOUR COMPUTER Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord.
HOW TO CONNECT YOUR VCR Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 20.
If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next "chirp" is heard, the speed and/or incline will change to the next settings of the CD or video program.
HOW TOUSE PROGRAMS DIRECTLY FROM OUR INTERNET SITE B eturn to the treadmill and stand on the foot rails. Find the clip attached to the key and slide the key onto the waistband of your clothing.
THE INFORMATION MODE/DEMO MODE THE OPTIONAL CHEST PULSE SENSOR The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Remove the key and unplug the power cord.
TROUBLE-SHOOTING 26 Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-888-825-2588, Monday through Friday, 6 a.
PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
CONDITIONING GUIDELINES 28 A=WARNIN G: Before beginning this or any exercise program, consult your physi- cian, This is especially important for individu- als over the age of 35 or individuals with pr.
SUGGESTED STRETCHES The correct form forseveral basic stretches is shown atthe right. Move slowly as you stretch--never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
PART LISTmModel No. NTTL11994 R0101A 30 To locate the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual. Key No. Qty.
61 59 34 44 60 59 18-{ 9 26 25 83 109 43 39 / 4 / 8O To identify the parts shown on this exploded drawing, refer to the PART LIST on pages 30 and 31 of the USER'S MANUAL.
/ "r 90 0 I07 76 111 90 107 76 33 /_ 90.
LIMITED WARRANTY WHAT IS COVERED--The entire NordicTrack ® EXP200O treadmill ("Product") is warranted to be free of all defects in material and workmanship. WHO IS COVERED--The original purchaser or any person receiving the Product as a gift from the original purchaser.
Ein wichtiger Punkt beim Kauf des Geräts NordicTrack NTTL11994 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NordicTrack NTTL11994 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NordicTrack NTTL11994 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NordicTrack NTTL11994 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NordicTrack NTTL11994 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NordicTrack NTTL11994 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NordicTrack NTTL11994 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NordicTrack NTTL11994. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NordicTrack NTTL11994 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
