Benutzeranleitung / Produktwartung NTS5925.0 des Produzenten NordicTrack
Zur Seite of 24
Visit our website at www .nordictrack.com new products, prizes, fitness tips, and much more! V CAUTION Read all precautions and instruc - tions in this manual before using this equipment. Save this manual for future reference. Model No. NTS5925.0 Serial No.
2 W ARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 W ARNING DECAL PLACEMENT The decal shown here has been placed on the resistance system. If the decal is missing or illegible, please call the toll-free telephone number on the front cover of this manual and order a free replacement decal. Apply the decal in the location shown.
4 1. Read all instructions in this manual and al l warnings on the resistance system befor e using the resistance system. Use the resist- ance system only as described in this manu- al. 2. It is the responsibility of the owner to ensure that all users of the resistance system are adequately informed of all precautions.
5 Wheel Arm Pad Dip Arm Seat Right Side Left Side Note: The terms “right side” and “left side” are determined relative to a user with his back to the backrest; they do not correspond to right and left on the drawings in this manual.
1. Press two Base Caps (62) onto the Base (1). 2. Attach a Wheel (60) to a Wheel Endcap (61) with an M6 Bolt Set (79). Attach the Wheel Endcap (61) to the Base (1) with two M4 x 20mm Self-tapping Screws (94). Attach a Base Foot (68) to the Base (1) with an M4 x 20mm Self-tapping Screw (94).
7 3. Attach the Upright Base (2) to the Base (1) with four M10 x 60mm Bolts (80), four M10 W ashers ( 91), and four M10 Nylon Locknuts (74). D o not tighten the Locknuts yet. 4. Attach the Upright (3) to the Upright Base (2) with five M10 x 25mm Button Bolts (99) and five M10 W ashers (91).
8 5. Orient the Backrest (16) as shown. Attach the Backrest to the Upright Base (2) and the Upright ( 3) with two M6 x 100mm Screws (71) and two M6 W ashers (85). 6. Attach the Center Cover (59) to the Front Mech Cover (13) with two M4 x 20mm Self-tapping Screws (94).
9 8. Attach a Pull-up Handle (18) to the T op Frame (4) with four M10 x 20mm Button Bolts (83) and four M 10 W ashers (91). S lide a T op Arm Cap (20) over the Pull-up Handle (18) and onto the T op Frame (4). Press a 32mm Round Outer Cap (22) onto the Pull-up Handle (18).
10 13. Attach the Seat (15) to the Seat Frame (6) with four M6 x 16mm Screws (72). 13 15 72 72 6 12. W et the inside of the two Large Foam Pads (24) and the Dip Arm (5) with soapy water . Slide the two Large Foam Pads onto the Dip Arm. Slide a Dip Arm Cap (65) onto a Dip Handle (1 1).
1 1 15. Slide two Small Foam Pads (25) onto the Leg Lever (8). Press two Endcaps (57) onto the Leg Lever . Repeat this step with the Seat Frame (6). 17. Attach the Curl Pad (29) to the Curl Post (9) with two M6 x 16mm Screws (72). 18. Make sure that all parts have been properly tightened before the resistance system is used.
This section explains how to adjust the resistance system. See the EXERCISE GUIDELINES on page 16 for important information about how to get the most benefit from your exercise program. Also, refer to the accompa- nying exercise guide to see the correct form for each exercise.
13 11 2 Hook T ube 58 ADJUSTING THE DIP ARM T o perform some exercises, the Dip Arm (5) should be locked in the up position. Remove the Pin (58) and lift the Dip Handle (1 1). Engage the Pin into the Upright (3) and the hole in the Dip Arm plate. T o use the Dip Arm (5), remove the Pin (58) and lower the Dip Handle (1 1).
14 66 6 29 12 30 Press 122 A TT ACHING THE CURL P AD T o use the Curl Pad (29), first remove the 50mm Round Slanted Inner Cap (66) from the Seat Frame (6). Then, insert the Curl Post (9) into the Seat Frame and secure the Curl Post with the Curl Knob (64).
15 11 8 123 120 121 11 9 56 TIGHTENING THE MECH ROPE The type of rope used on the resistance system, can stretch slightly when it is first used. If there is slack in the rope before resistance is felt, the rope should be tightened. T o tighten the Mech Rope (56), first set the system resistance level to 100 pounds.
17 Rest for a short period of time after each set. The ideal resting periods are: • Rest for three minutes after each set for a muscle building workout. • Rest for one minute after each set for a toning work- out. • Rest for 30 seconds after each set for a weight loss workout.
EXERCISE GUIDELINES THE FOUR BASIC TYPES OF WORKOUTS Muscle Building T o increase the size and strength of your muscles, push them to a high percentage of their maximum capacity . Y our muscles will continually adapt and grow as you progressively increase the intensity of your exercise.
18 MONDA Y D ate: / / EXERCISE WEIGHT SETS REPS EXERCISE WEIGHT SETS REPS EXERCISE WEIGHT SETS REPS AEROBIC EXERCISE AEROBIC EXERCISE TUESDA Y Date: / / WEDNESDA Y Date: / / THURSDA Y Date: / / FRIDA Y Date: / / Make photocopies of this page for scheduling and recording your workouts.
19 MONDA Y D ate: / / EXERCISE WEIGHT SETS REPS EXERCISE WEIGHT SETS REPS EXERCISE WEIGHT SETS REPS AEROBIC EXERCISE AEROBIC EXERCISE TUESDA Y Date: / / WEDNESDA Y Date: / / THURSDA Y Date: / / FRIDA Y Date: / / Make photocopies of this page for scheduling and recording your workouts.
M6 W asher (85) M10 Nylon Locknut (74) M4 W asher (36) M4 x 20mm Self- tapping Screw (94) M M6 x 100mm Screw (71) M10 x 98mm Button Bolt (98) M10 x 217mm Button Bolt (73) M10 x 20mm Button Screw (83) .
Key No. Qty . Description Key No Qty . Description Key No. Qty . Description 1 1 Base 2 1 Upright Base 3 1 Upright 4 1 T op Frame 5 1 Dip Arm 6 1 Seat Frame 7 1 Base Plate 8 1 Leg Lever 9 1 Curl Post .
32 49 69 48 10 67 14 95 95 67 14 74 70 55 56 69 109 9 3 69 30 93 12 13 47 74 70 51 82 82 52 28 53 53 33 29 72 9 55 56 5 92 4 93 104 9 104 74 84 76 74 51 31 53 53 106 105 94 94 6 9 95 95 78 41 39 37 39.
74 1 53 65 77 53 11 24 2 3 53 65 77 53 22 5 18 24 18 20 20 83 83 83 21 9 4 4 23 22 98 83 74 26 26 19 129 129 74 27 27 91 27 27 16 17 74 71 99 6 7 62 62 102 68 80 68 25 74 74 60 79 94 79 79 79 60 94 99.
Part No. 237942 R0306A Printed in USA © 2006 ICON IP , Inc. T o order replacement parts, see the front cover of this manual. T o help us assist you, please be prepared to give the following information: • the MODEL NUMBER of the product (NTS5925.
Ein wichtiger Punkt beim Kauf des Geräts NordicTrack NTS5925.0 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NordicTrack NTS5925.0 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NordicTrack NTS5925.0 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NordicTrack NTS5925.0 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NordicTrack NTS5925.0 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NordicTrack NTS5925.0 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NordicTrack NTS5925.0 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NordicTrack NTS5925.0. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NordicTrack NTS5925.0 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
