Benutzeranleitung / Produktwartung NTL19806.0 des Produzenten NordicTrack
Zur Seite of 34
USER'S MANUAL CAUTION Read all precautions and instruc - tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. NTL19806.0 Serial No. Write the serial number in the space above for reference.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. It is the responsibility of the owner to ensure t hat all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side.
21. Do not change the incline of the treadmill by p lacing objects under the treadmill. 22. When folding or moving the treadmill, make sure that the frame is held securely by the pin o n the latch knob. 23. Inspect and properly tighten all parts of the t readmill regularly.
5 W ARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
6 Thank you for selecting the revolutionary NordicTrack ® E LITE 4200 treadmill. The ELITE 4200 treadmill offers a selection of features designed to make your work- outs at home more enjoyable and effective.
7 ASSEMBL Y A ssembly requires two persons. S et the treadmill in a cleared area and remove all packing materials. D o not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
8 2. Identify the Left Upright (73) and the Right Upright (74). Hold the Right Upright near the R ight Base Cover (77) as shown. Insert the Upright Wire Harness (75) up through the rec- t angular hole in the bottom of the Right Upright and out of the top of the Right Upright.
9 4. With the help of a second person, hold the con- sole assembly near the Uprights (73, 74). Connect the Upright Wire Harness (75) to the C onsole Wire Harness (71). M ake sure to con- nect the connectors properly (see the inset drawing). The connectors should slide to- gether easily and snap into place.
10 8. Note the location of the 75 ohm antenna terminal and the audio/video input jack on the treadmill. For the television to operate, the included Audio/Video Wire Harness (115) and your DVD player o.
1 1 H OW TO CONNECT AN ANTENNA Indoor Antenna 1 . Place a VHF antenna in the desired loca- tion. Connect the 300 ohm fl at wire from the antenna to a 300 ohm to 75 ohm adapter. 2. Push the 300 ohm to 75 ohm adapter onto the 75 ohm an- tenna terminal on the treadmill frame near the power cord.
12 H OW TO PUT ON THE CHEST PULSE SENSOR T he chest pulse sensor consists of two components— the chest strap and the sensor unit. Insert the tab on one end of the chest strap into the hole in one end of the sensor unit, as shown in the inset drawing above.
13 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- i cone spray or other substances to the walking b elt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
14 FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effec - tive and e njoyab le. When the manual mode of the con- sole is selected, the speed and incline of the treadmill can be changed with the touch of a button.
15 H OW TO TURN ON THE POWER Plug in the power cord (see page 13). Next, l ocate the reset/off cir- cuit breaker on the treadmill frame near the power cord. Make sure that the circuit breaker is in the reset position. Stand on the foot rails of the tread- mill.
16 Select a display mode and follow your progress with the exercise information on the screen. As you walk or run on the treadmill, the screen can d isplay the following exercise information: • The elapsed time. Note: When a program is se- lected, the screen will show the time remaining in the program instead of the elapsed time.
17 H OW TO USE AN EVENT TRAINING PROGRAM I nsert the key into the console. See HOW TO TURN ON THE POWER on page 1 5. S elect an event training program. To select an event training program, press the Event Training button repeatedly; the name of the program and a track will appear on the screen.
18 H OW TO USE A PRESET PROGRAM I nsert the key into the console. See HOW TO TURN ON THE POWER on page 15. S elect a preset program. To select a preset program, press the Aerobic Fitness button, the Performance button, or the Weight Loss button repeatedly.
19 H OW TO CREATE A CUSTOM PROGRAM I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 15. S elect one of the four custom programs.
20 H OW TO USE A CUSTOM PROGRAM I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 15. S elect one of the four custom programs. To select a custom program, press the Custom button repeatedly. When a custom program is se- lected, the name of the program (CUSTOM: 1, CUSTOM: 2, CUSTOM: 3, or CUSTOM: 4) will appear on the screen.
21 H OW TO USE A HEART RATE PROGRAM Follow the steps below to use a heart rate program. Put on the chest pulse sensor. Note: You must wear the chest pulse sensor to use a heart rate program. Insert the key into the console. See HOW TO TURN ON THE POWER on page 15.
22 To stop the program at any time, press the Stop but ton . To restart the program, press the Start but - t on. The walking belt will begin to move at 1 mph.
23 H OW TO USE THE INFORMATION MODE The console features an information mode that allows you to view treadmill usage information, select a sys- t em of measurement for the console, and turn on and t urn off the demo mode.
24 HOW TO ADJUST THE CUSHIONING SYSTEM T he treadmill features a cushioning system that re- duces the impact as you walk or run on the treadmill. T o increase the firmness of the walking platform, step off the treadmill and slide the cushion adjusters toward the front of the treadmill.
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be- c ome permanently damaged. Remove the key and unplug the pow er cord.
26 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
27 Next, locate the Reed Switch (14) and the Magnet (12) on the left side of the Pulley (11). Turn the Pulley u ntil the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and t he Reed Switch is about 1/8”. I f necessary, loosen the indicated Screw (29), move the Reed Switch slightly, and then retighten the Screw.
28 PROBLEM: The incline of the treadmill does not change correctly S OLUTION: a . With the key in the console, press one of the Incline buttons. W hile the incline is changing, re- move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the m aximum incline level and then return to the minimum level.
29 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
30 P ART LIST—Model No. NTL19806.0 R1006A To locate the parts listed below, see the EXPLODED DRAWING attached in the center of this manual. Key No. Qty.
31 Key No. Qty. Description Key No. Qty. Description 99 1 Handrail 100 1 Latch Assembly 101 1 Latch Warning Decal 102 1 AV Wire Nut 103 1 Filter Wire 1 04 1 Idler Arm Bolt 105 2 Rear Roller Washer 106.
28 31 20 29 14 26 27 21 22 38 23 104 79 9 10 101 62 60 105 56 58 4 6 47 62 10 57 7 8 7 39 38 40 29 54 29 59 12 15 16 19 18 51 38 72 4 4 17 32 35 33 33 43 36 69 37 18 17 19 16 15 1 2 2 1 13 29 1 1 72 3.
99 94 89 73 74 83 38 86 85 87 87 29 92 91 93 86 85 38 64 127 38 38 82 81 82 81 82 81 95 96 90 64 64 90 90 70 4 94 75 65 67 75 63 64 90 1 14 1 14 5 5 4 4 82 81 4 4 4 4 4 80 4 49 76 77 4 4 4 4 90 72 90 .
Part No. 249193 R1006A Printed in USA © 2006 ICON IP, Inc. LIMITED W ARRANTY WHAT IS COVERED—The entire NordicTrack ELITE 4200 treadmill (“Product”) is warranted to be free of all defects in material and workmanship. W HO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.
Ein wichtiger Punkt beim Kauf des Geräts NordicTrack NTL19806.0 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NordicTrack NTL19806.0 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NordicTrack NTL19806.0 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NordicTrack NTL19806.0 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NordicTrack NTL19806.0 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NordicTrack NTL19806.0 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NordicTrack NTL19806.0 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NordicTrack NTL19806.0. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NordicTrack NTL19806.0 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
