Benutzeranleitung / Produktwartung 9400 S des Produzenten Nokia
Zur Seite of 28
Owner’s Manual MEDIAMASTER 9400S.
.
GB 3 Contents FOR YOUR SAFETY 4 Rear panel 4 Front panel 5 INSTALLATION OF THE MEDIAMASTER 5 Connecting the Mediamaster to the satellite dish 6 Connecting the Mediamaster to a TV set 6 Connecting to a.
GB 4 • Keep a clear space around the Mediamaster to allow for sufficient ventilation. • Do not cover the Mediamaster or place it on a unit that emits heat.
GB 5 The box for your Mediamaster should contain the following items: Medi a master 9400 S includes About the SCART sockets Ÿ The rear panel of the Mediamaster is equipped with 2 SCART sockets . When you connect other products to any of these sockets, always use fully featured SCART cables (as supplied).
GB 6 Installing the satellite dish Ÿ Your satellite dish should be installed with a cable for you to connect to t he Mediama ster. If you do not have this cable you will need to buy one from a dealer (tell the dealer you need a coaxial cable and F - connectors).
GB 7 Refer to your video recorder manual for full instructions. Ÿ Connect one SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster. Ÿ Connect another SCART cable between the VCR and the AUX SCART socket on the Mediamaster.
GB 8 Connect an RCA/Cinch stereo cable from the AUDIO L R sockets on the Mediamaster to the LINE, AUX, SPARE or EXTRA input sockets on your Hi Fi system .
GB 9 This section describes how to operate the Mediamaster using the buttons on the remote control. Some of the functions can also be carried out using the buttons on the front panel. T o switch the Mediamaster in and out of standby mode. EXIT TV To return to the viewing mode from a menu without storing settings (in menu mode).
GB 10 Once you have correctly connected the Mediamaster, you also have to perform some “ Basic Settings ” . During this procedure, helpful information is displaye d at the bottom of the menus. Please note! The OK button always confirms a selection within these menus, and pressing it will take you to the next step in the installation process.
GB 1 1 To install the Mediamaster properly you have to adjust a few settings. You will always be guided by the information at the bottom of the menus. When you have finished the final part of the setup procedure you can start watching TV channels and listening to radio channels.
GB 12 S atellite name : From here you can select a name for the configuration. Switch Type : There are in principle two kinds of external DiSEqC switches on the market at pre sent. One for connection of two LNBs. The other one for connection of up to 4 LNBs.
GB 13 You can use manual channel search if you want to add new channels later. For example If you have a special antenna configuration which is not assigned in the “ Antenna alternative ” menu, you can add new channels using the “ manual channel search ” func tion.
GB 14 If you have a TV set with a 4:3 picture format, and the transmission is in 16:9, y ou can select “ 4:3 (Pan & Scan) ” or “ 4:3 ( Letterbox ) ” to change display format. “ 4:3 (Pan & Scan) ” will fill up the screen vertically, but cut off some information from the left and right sides of the picture.
GB 15 By pressing the GUIDE button you obtain access to the TV Guide which give s the titles of the current programme s on the different channels. By pressing the LEFT or RIG HT button you also can also obtain information about the next programme. The minimized viewing window also helps you to select channels and information.
GB 16 While listening to radio Programmes you can see a programme list on the screen by pressing the OK button. You can change to another channel by pressing the UP/DOWN buttons and then press ing the OK button. To move faster ( 8 at the time) between the channels you can also use the DOUBLE ARROW buttons.
GB 17 TV/Radio Channels will show a list with the names of the different channels. To move faster within the list, use the DOUBLE ARROW buttons. Press OK to enter a marked channel. These guides will give you an overview of programme i nformation from the TV/Radio channels.
GB 18 If you have created several Favorite lists you can determine the sequence in which the lists will appear. To rearrange channels, select the list which you want to move using the OK button. Move the channels to the desired posit ion using the UP/DOWN button and press OK.
GB 19 Y ou can arrange the order of channels within your favorite lists. To rearrange channels, select the channel which you want to move using the O K button.
GB 20 Change a ccess code From here you can change the access code from the standard 1234. DO NOT FORGET IT! Without it you do not have access to any of the functions where the code is required! If you forget it, you have to contact an Authorized Nokia Service Center t o get help.
GB 21 You can en joy this On/Off Timer for such a convenience as wake - up or automatic VCR recording. Mediamaster will be automatically switched - on and play specified channel for the specified time, and then switched - off. You may specify up to 8 separate lists with turn - on time, date, duration, channel and occurrence options.
GB 22 Select this Menu from the line “ Installat ion ” in the Main Menu. The submenu will give you the opportunity to change the preferences performed during first time installation. You can also add features that were not included in the first installation.
GB 23 This will start the Installation procedure from the “ Welcome Menu ” . When you press OK in the “ Welcome Menu ” again, be aware of the fact, that all previous channels and settings will be erased! To exit the ” Reinstall ” menu without erasing any channels, press “ Back ” .
GB 24 AGC Acquisition Gain Control. Audio system With digital satellite reception, the sound is transmitted in packages and is elected either in a special audio mode or pre - selected by using the installation set - up. This makes it possible to select between several different languages in a film.
GB 25 Problem Possible causes What to do The display on the front panel does not light up/is not lit. Mains lead is not connected. Check that the mains lead is plugged into the power socket . No sound or picture. The satellite dish is not po inting at the satellite.
GB 26 Transmission Standards DVB,MPEG2 LNB/Tuner input Connector 2 x F - type (Loop Through) Input frequency 950 - 215 0MHz Max Current 500mA max Supply Voltage 13V/18V DiSEqC 1.
GB 27 System Settings 1.TV Screen Format 2.Output Selection 3.UHF Channel Number 4.RF Modulator Type 5.Information Box Time out 6.Display Volume Indicator 7.Date Setting(dd/mm/yyyy) 8.Time Setting(hh:mm) 9.GMT Offset 7.Game First Time Installation MENUS SCREEN STRUCTURE Welcome Menu Language Settings 1.
Nokia is a registered trademark of Nokia Corporation www.nokia.com 66 76967-10 KQX1A668Y.
Ein wichtiger Punkt beim Kauf des Geräts Nokia 9400 S (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Nokia 9400 S noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Nokia 9400 S - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Nokia 9400 S reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Nokia 9400 S erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Nokia 9400 S besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Nokia 9400 S verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Nokia 9400 S. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Nokia 9400 S gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
