Benutzeranleitung / Produktwartung 632 des Produzenten Asus
Zur Seite of 142
MyPal A636/632 Handbook.
ii Copyright © 2005 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a r.
iii Contents at a glance This handbook contains the information you need to efficiently use ASUS ® MyPal A636/632 Pocket PC. • Chapter 1 - Get started! .
iv • Chapter 8 - Get connected ........................................ 8 - 1 This chapter provides the procedures for connecting to the Internet, and for transferring data using infrared (IR). • Chapter 9 - Bluetooth ® ..........................
v MyPal A636/632 specifications Processor Operating system Memory Display Battery Expansion slot Communication Audio Size Weight Intel ® XScale™ PXA272 416MHz Microsoft ® Windows Mobile™ 5.
vi Package contents Y our package includes several accessories for the Pocket PC. After unpacking, check the items against the list below and make sure that they are in good condition. If any item is missing or damaged, contact your dealer or retailer immediately .
Get started! 1-1 Chapter 1 Get started! ♦ ♦ ♦ ♦ ♦ Introducing MyPal ................................................ 1-2 Front features ........................................................................... 1-2 Back features ...........
1-2 Chapter 1 Introducing MyPal The ASUS ® MyPal A636/A632 is truly a good companion wherever you go. Powered by a 416MHz Intel ® XScale PXA272 processor , equipped with 64MB SDRAM and 128MB Flash ROM, and bundled with the Microsoft ® Windows Mobile ® 5.
Get started! 1-3 • Speaker - allows you to hear alarms and other sound outputs from the device. • 4-way navigation button - functions like the four arrow keys on a keyboard. This button allows you to move through the program icons, folders, or files in a menu by scrolling up or down, left or right.
1-4 Chapter 1 Side features • Infrared (IR) port - allows you to copy or send data to another device with an IR port. For a successful exchange of data, the IR port of both devices must be properly aligned and facing each other within the IR communication range.
Get started! 1-5 RESET Reset switch Headphone jack Sync and power cable connector T op features • External antenna cover - covers the external antenna port. If the GPS signal is weak, connect an external antenna to the port. • SD card slot - accommodates an SD memory card, MMC memory card or an SDIO interface card (e.
1-6 Chapter 1 The stylus The stylus functions on a Pocket PC the same way a mouse functions on a standard PC. Use the stylus to tap or drag on the LCD touch screen to open programs or execute commands. • T ap. T ouch the screen once with the stylus to open programs and select options.
Get started! 1-7 Setting up MyPal Installing and removing the battery 1. First, remove the battery cover . Press on the battery cover latch behind the device, then slide down the battery cover to remove it. 2. Position and insert the right side of the battery with its contacts matching the 4-pin connector on the right side of the compartment.
1-8 Chapter 1 Connecting to a power source IMPORT ANT Y ou need to charge the battery before using the device for the first time. To connect the power adapter and charge the battery 1. Connect the power cable to the jack on the sync cable adapter . 2.
Get started! 1-9 Setting up GPS To receive GPS signal Flip open the GPS antenna panel from the back of the device. Y ou may rotate the panel as illustrated below . To use the GPS car-mount kit 1. Mount the GPS cradle onto the car ’ s windshield, then place the device on the cradle.
1-10 Chapter 1 Additional storage MyPal A636 comes with the standard SD card slot while MyPal A632 has an additional mini SD card slot . The SD card slot can be inserted with SD (Secure Digital) or MMC memory cards. It also supports SDIO cards of various functionalities including 802.
Get started! 1-11 Activating MyPal Y ou need to properly calibrate and activate your device before using it. This process ensures accurate positioning when entering text and selecting menus. Calibrating and activating your device 1. Press the power button.
1-12 Chapter 1 Basic screens on MyPal T oday screen Normally , the T oday screen appears when you turn on your device for the first time each day . NOTE When the device is already on and the screen displays another program, you may return to the T oday screen any time by tapping the icon.
Get started! 1-13 Start menu From the Start menu, you can select programs, settings, and help topics. To display the Start menu, tap the icon from the top of the screen. Pop-up menus With the pop-up menus, you can easily choose an action for an item. For example, you can use the pop-up menu in File Explorer to delete, copy , or beam an item.
Get started! 1-17 Pop-up menus With the pop-up menus, you can easily choose an action for an item. For example, you can use the pop-up menu in File Explorer to delete, copy , or beam an item. To access a pop-up menu, tap and hold the stylus on the item that you wish to perform action on.
Learn the basics 2-1 Chapter 2 Learn the basics ♦ ♦ ♦ ♦ ♦ V iewing system information ................................ 2-2 ♦ ♦ ♦ ♦ ♦ Entering information ............................................ 2-2 Entering text using the Input Panel .
2-2 Chapter 2 Entering information Y ou can enter information in your device in any of the following ways: • Use the input panel to enter text using the soft keyboard or the Letter Recognizer •W r.
Learn the basics 2-3 To type with the soft keyboard: 1. T ap the arrow next to the Input Panel button, then tap Keyboard . NOTE For a demonstration, open Notes .
2-4 Chapter 2 To use Block Recognizer: With the Block Recognizer , you can input character strokes that are similar to those used on other devices. 1. T ap the arrow next to the Input Panel button, then tap Block Recognizer . 2. Write a letter in the box.
Learn the basics 2-5 To use T ranscriber: With T ranscriber , you can use the stylus to write anywhere on the screen as you would on paper . Unlike Letter Recognizer and Block Recognizer , you can write a sentence or additional information. Pause after writing and let T ranscriber convert the written characters to typed characters.
2-6 Chapter 2 To edit your writing: 1. T ap and hold the stylus next to the text that you wish to select until the insertion point appears. 2. Without lifting, drag the stylus across the text to select it. If you accidentally write on the screen, tap Menu , then Undo Ink and try again.
Learn the basics 2-7 If the conversion is incorrect, you can select different words from a list of alternates or return to the original writing. 1. T ap and hold the incorrect word. 2. When the pop-up menu appears, tap Alternates to display a list of alternate words for the selection.
2-8 Chapter 2 Drawing on the screen Y ou can draw on the screen in the same way that you write on the screen. The difference between writing and drawing on the screen is how you select items and how they can be edited. For example, selected drawings can be resized, while writing cannot.
Learn the basics 2-9 Recording a message In any program where you can write or draw on the screen, you can also quickly capture thoughts, reminders, and phone numbers by recording a message. In Calendar , T asks, and Contacts, you can include a recording in the Notes tab.
2-10 Chapter 2 To use the Help feature: 1. T ap > Help . 2. T ap a link to the topic that you wish to display . To change the recording format: 1. In the note list, tap Menu > Options . 2. T ap the Global Input Options link. 3. T ap the Options tab.
Learn the basics 2-11 Customizing your device Y ou can customize your device by adjusting the settings, using the built-in programs, and installing additional software. To see the available options: 1. T ap > Settings to display the Settings screen.
2-12 Chapter 2 Changing the Start menus To change the menu items: 1. T ap > Settings , then tap the Menus icon. 2. Check the box opposite the items that you wish to appear on the Start Menu . 3. T ap OK . Changing the date and time To change the date and time settings: 1.
Learn the basics 2-13 Changing the owner information To change the owner information: 1. T ap > Settings , then tap the Owner Information icon. 2. Key-in the data that you wish to appear on the T oday screen. 3. Add notes to the owner information by tapping the Notes tab.
2-14 Chapter 2 Landscape orientation Changing the screen display orientation To change the screen display orientation: 1. T ap > Settings > System tab. 2. T ap the Screen icon to show the screen options. 3. Select your desired orientation, then tap OK .
Learn the basics 2-15 To enable the ClearT ype feature: 1. T ap > Settings , then tap the System tab. 2. T ap the Screen icon to show the screen options. 3. T ap the Clear T ype tab. 4. Check the Enable Clear T ype box, then tap OK . To change the screen text size: 1.
2-16 Chapter 2 Changing the button assignments To change the button assignments: 1. T ap > Settings , then tap the Buttons icon. 2. Highlight a button by tapping on it. 3. T ap the down arrow to display the programs that you can assign to the button.
Learn the basics 2-17 To customize the speed of your Up/Down button control: 1. T ap the Up/Down Control tab. 2. T ap the slider to your desired settings then tap OK when done. NOTE T ap the Advance tab to set options for the key light and hold switch.
2-18 Chapter 2 Changing the battery power settings To change the battery power settings: 1. T ap > tap Settings . 2. T ap the System tab. 3. T ap the Power icon to display the battery power status. This screen shows the detected percentages of the remaining battery power .
Learn the basics 2-19 Selecting sounds and notifications Y our device can remind you of things you have to do in several ways. For example, if you have set up an appointment in Calendar , a task with a due date, or an alarm in Clock, you will be notified in any of the following ways.
2-20 Chapter 2 To change the W akeup settings: 1. T ap > Settings . 2. T ap the Personal tab, then tap the W akeup Source icon. 3. Check the boxes of the items to control what functions/conditions will turn on the device’s power . Pressing any one of the function buttons on the front panel wakes up the device.
Learn the basics 2-21 To change the USB settings: 1. T ap > Settings . 2. T ap the Connections tab, then tap the USB Settings icon. 3. Choose a USB Client Function. • RNDIS - ( R emote N etwork D river I nterface S pecification) lets you send and receive data using the device when connected to another device.
2-22 Chapter 2 To view the running programs: 1. T ap > Settings , then tap the System tab. 2. T ap the Memory icon, then tap the Running Programs tab to display a list of currently running programs. 3. If you wish to free some system memory currently used by the running programs, select a program then tap Stop .
Learn the basics 2-23 Using simple applications Y our device includes several simple application that are useful in your day- to-day use of your device. NOTE The major applications that came with the Microsoft ® Windows Mobile ® 5.0 are discussed in other chapters.
2-24 Chapter 2 Games T ap the Games icon to display the available games. Bubble Breaker The main objective of this game is to burst all the bubbles. T o do so, tap two or more jawbreakers of the same color that are connected to each other . The more bubbles you burst at a time, the higher your score.
Learn the basics 2-25 Solitaire The main objective of this game is to use all the cards in the deck to build up four suit stacks in ascending order , beginning with the aces. NOTE For details on the game rules, see the Help information on your device.
2-26 Chapter 2 Pictures & V ideos Use Pictures & Videos to view pictures and play back videos of various formats stored on your device or on a storage card. Y ou can then send them to your friends, view a slideshow of your pictures, play back the video or set a picture as background on the T oday screen.
Learn the basics 2-27 To use Auto Correct •T ap Menu > Edit > Menu > Auto Correct to automatically adjust the picture. NOTE T ap Menu then Undo to reverse the last action made. T ap Revert to Saved to reverse all actions done on the picture.
2-28 Chapter 2 Checking Device Status Quickly view essentail device information such as storage usage and battery life by using Asus Status . To open Asus Status 1. T ap the Asus Status icon at the lower right corner of the screen. 2. A menu opens displaying general information about your device.
Synchronize and enhance 3-1 Chapter 3 Synchronize and enhance ♦ ♦ ♦ ♦ ♦ Microsoft ® ActiveSync ® ...................................................................... 3-2 What is ActiveSync ® ? ...........................................
3-2 Chapter 3 Microsoft ® ActiveSync ® What is ActiveSync ® ? The Microsoft ® ActiveSync ® is one of the important bundled programs in MyPal. With ActiveSync, you can synchronize the information on your desktop computer with the information on your device.
Synchronize and enhance 3-3 Installing ActiveSync ® on your computer The ActiveSync program is already installed on your device. T o synchronize information on your device with your computer , you must also install ActiveSync on your computer . Install ActiveSync from the Companion CD that came with your product package.
3-4 Chapter 3 9. Follow the instructions on the succeeding screens. If you have previously installed Microsoft ® ActiveSync ® in your computer , the installation wizard detects it and prompts you with a message. Click Next to continue installing and replace the current version.
Synchronize and enhance 3-5 A sync relationship is a file that allows you to synchronize your device with your desktop computer . This file is stored on your desktop computer . An additional file that enables your desktop computer to recognize your device is stored on your device.
3-6 Chapter 3 Immediately after you set up a sync relationship, ActiveSync starts automatically and initiates the first synchronization between your device and your computer .
Synchronize and enhance 3-7 Manually initiating synchronization Once you have set up ActiveSync and completed the first synchronization process, you can initiate synchronization from your device at any time. To manually initiate synchronization: 1. T ap , Programs , then tap the ActiveSync icon to display the ActiveSync screen.
3-8 Chapter 3 Synchronization options The Microsoft ActiveSync program allows you to customize your synchronization settings at any time. Y ou can select the items to synchronize, set the synchronization schedule, and specify the synchronization rules.
Synchronize and enhance 3-9 Installing other applications The Companion CD packs a variety of useful applications. Y ou may install some of the applications directly from the CD and download other available applications from the Internet. To install applications from the Companion CD: 1.
3-10 Chapter 3 7. Click Pocket PC Applications to display the entertainment programs that you can install on your device, then click Details for installation instructions. 8. Click Desktop Applications to display the entertainment programs that you can install on your computer , then click Details for installation instructions.
Microsoft ® Pocket Outlook 5-1 Chapter 5 Microsoft ® Pocket Outlook ♦ ♦ ♦ ♦ ♦ Introduction ........................................................... 5-2 ♦ ♦ ♦ ♦ ♦ Calendar .......................................................
5-2 Chapter 5 Introduction Microsoft ® Pocket Outlook includes Calendar , Contacts, T asks, Notes, and Messaging. Y ou can use these programs individually or together . For example, you can use an e-mail address stored in Contacts to address e-mail messages in Messaging.
Microsoft ® Pocket Outlook 5-3 Creating appointments To create an appointment: 1. If you are in Day or Week view , tap your desired date for the appointment, 2. T ap Menu on the Menu bar then tap New Appointment . 3. Using the input panel, enter a description and a location.
5-4 Chapter 5 Using the summary screen When you tap an appointment in Calendar , a summary screen appears. T o change the appointment, tap Edit . Creating meeting requests Y ou can use Calendar to set up meetings with users of Outlook and Pocket Outlook.
Microsoft ® Pocket Outlook 5-5 Contacts Contacts maintains a list of your friends and colleagues so that you can easily find the information you look for , whether you are at home or on the road. Using the infrared port (IR) on the device, you can quickly share Contacts information with other device users.
5-6 Chapter 5 Creating contacts To create a contact: 1. T ap , then tap Contacts . 2. T ap New to display a blank contact form. 3. Using the input panel, enter a name and other contact information. Y ou will need to scroll down to see all available fields.
Microsoft ® Pocket Outlook 5-7 Finding a contact There are four ways to find a contact. 1. In the contact list, enter a contact name in the box under the navigation bar . T o show all contacts again, clear text from the box or tap the button to the right of the box.
5-8 Chapter 5 T asks Use T asks to keep track of what you have to do. Creating tasks To create a task: 1. T ap , then tap T asks . 2. T ap New to display a blank task form. 3. Using the input panel, enter a description. 4. Enter a start date and due date, or enter other information by tapping the field first.
Microsoft ® Pocket Outlook 5-9 5. T o assign the task to a category , tap Categories and select a category from the list. On the task list, you can display tasks by category . 6. T o add notes, tap the Notes tab. Y ou can enter text, draw , or create a recording.
5-10 Chapter 5 Notes Quickly capture thoughts, reminders, ideas, and phone numbers with Notes. Y ou can create a written note or a recording. Y ou can also include a recording in a note. If a note is open when you create the recording, it will be included in the note as an icon.
Microsoft ® Pocket Outlook 5-11 Creating notes To create a note: 1. T ap , then tap Notes . 2. T ap New to display a blank note. 3. Create your note by writing, drawing, typing, or recording. For more information about using the input panel, writing and drawing on the screen, and creating recordings, see Chapter 2.
5-12 Chapter 5 Messaging Use Messaging to send and receive e-mail messages in one of these ways: • Synchronize e-mail messages with Microsoft Exchange or Microsoft Outlook on your desktop computer .
Microsoft ® Pocket Outlook 5-13 Connecting directly to an e-mail server In addition to synchronizing e-mail messages with your desktop computer , you can send and receive e-mail messages by connecting to an e-mail server using a modem or network card connected to your device.
5-14 Chapter 5 When you connect to your e-mail server or synchronize with your desktop computer , by default, you will receive messages from the last five days only , the first 100 lines of each new messages, and file attachments of less than 100KB in size.
Microsoft ® Pocket Outlook 5-15 Reading messages in Inbox The messages you receive appear in your Inbox folder . By default, the most recently received messages appear on top of the list. Unread messages appear in boldface. T ap an e-mail message from your Inbox to display it.
5-16 Chapter 5 Composing messages To compose a message: 1. T ap New to display a blank e-mail screen. T ap to show or hide the complete message header T ap to send the message Enter the e-mail address here T ype your text here 2. In the To field, enter the e-mail address of your recipient.
Microsoft ® Pocket Outlook 5-17 To address your e-mail to several recipients, type the e-mail addresses separated by a semicolon. A semicolon is automatically added between e-mail addresses if you select from your Contacts list. All the names in the Contacts list with e-mail addresses appear in the e-mail address book.
5-18 Chapter 5 Managing e-mail messages and folders The behavior of the folders you create depends on whether you are using ActiveSync, SMS, POP3, or IMAP4. • If you use ActiveSync, e-mail messages in the Inbox folder in Outlook will automatically be sunchronized with your device.
Companion programs 6-1 Chapter 6 Companion programs ♦ ♦ ♦ ♦ ♦ W ord Mobile .......................................................... 6-2 Creating Pocket Word documents ........................................... 6-2 Saving Pocket Word documents .
6-2 Chapter 6 The companion programs consist of Microsoft ® Pocket Word, Microsoft ® Pocket Excel, Microsoft ® PowerPoint Mobile, MSN Messenger , and Windows Media™ Player for Pocket PC. To switch to a companion program on your device, tap Programs on the menu, then tap the program that you wish to open.
Companion programs 6-3 2. T ap New on the Menu bar to display a blank document. 3. Use any of the tools in the input panel to type your text. Saving W ord Mobile documents To save a Word Mobile document: When you have finished editing your document, tap OK .
6-4 Chapter 6 To specify save options: 1. With the document open, tap Menu . 2. From the pop-up menu, tap File , then tap Save As... to display the Save As screen. 3. Change the file name by simply typing a new one in the Name field. 4. T ap the down arrow in the Folder field to select a folder where you wish to place the file.
Companion programs 6-5 Opening an existing W ord Mobile document W ord Mobile contains a list of the files stored on your device. T ap a file in the list to open. T o delete, make copies of, and send files, tap and hold a file in the list, then select the appropriate action on the pop-up menu.
6-6 Chapter 6 Excel Mobile Excel Mobile works with Microsoft Excel on your desktop computer to give you easy access to copies of your workbooks. Y ou can create new workbooks on your device, or you can copy workbooks from your desktop computer to your device.
Companion programs 6-7 Creating an Excel Mobile document To create a new Excel document: 1. T ap , tap Programs , tap Excel Mobile . 2. T ap New to display a blank document. If you selected a template for new documents in the Options dialog box, that template appears with the appropriate text and formatting already provided.
6-8 Chapter 6 To specify save options: 1. With the document open, tap Menu , then tap File . 2. From the pop-up menu, tap Save As... to display the Save As screen. 3. Change the file name by simply typing a new one in the Name field. 4. T ap the down arrow in the Folder field to select a folder where you wish to place the file.
Companion programs 6-9 T ips for working in Excel Mobile T ake note of the following when working on large worksheets in Pocket Excel: • V iew in full-screen mode to see as much of your worksheet as possible. T ap V iew , then tap Full Screen . T o exit full-screen mode, tap Restore .
6-10 Chapter 6 PowerPoint Mobile PowerPoint Mobile works with Microsoft PowerPoint on your desktop computer to give you easy access to copies of your PowerPoint presentationss. Copy PowerPoint presentation files from your desktop computer to your device and view them on-the-go.
Companion programs 6-11 V iewing a PowerPoint Mobile file To go to the previous or next slide: 1. While viewing a PowerPoint file, tap the arrow on the lower-left side of the screen to open the menu. 2. In the menu, tap Next or Previous to go forward or go back in your PowerPoint Mobile file.
6-12 Chapter 6 V iewing a custom show Custom shows are presentations, usually a group of slides, within a presentation that are meant only for a specific audience. To view a custom show: 1. While viewing a PowerPoint file, tap the arrow on the lower-left side of the screen to open the menu.
Companion programs 6-13 MSN Messenger MSN Messenger on your device is an instant messaging program that allows you to: • See who among your contacts is online • Send and receive instant messages .
6-14 Chapter 6 Signing up To sign in to MSN Mesenger service: NOTE If you already use MSN Messenger on your desktop computer , your contacts will show up on your device. 1. T ap Menu then tap Sign in... from the menu. OR Simply tap the T ap here to sign in area.
Companion programs 6-15 W orking with contacts The MSN Messenger window shows all of your messenger contacts at a glance, divided into Online and Not Online categories. From this view , while connected, you can chat, send an e-mail, block the contact from chatting with you, or delete contacts from your list using the pop-up menu.
6-16 Chapter 6 Chatting with contacts T ap a contact name to open a chat window . Enter your message in the text entry area at the bottom of the screen, or tap My T ext to enter a preset message, then tap Send . T o invite another contact to a multi-user chat, tap Invite in the T ools menu, then tap the contact that you want to invite.
Companion programs 6-17 W indows Media Player for Pocket PC Use Microsoft ® Windows Media Player for Pocket PC to play digital audio and video files that are stored on your device or on a network. T o switch to Windows Media Player for Pocket PC, tap , then tap W indows Media .
6-18 Chapter 6.
Pocket Internet Explorer 7-1 Chapter 7 Internet Explorer Mobile ♦ ♦ ♦ ♦ ♦ Introduction ........................................................... 7-2 ♦ ♦ ♦ ♦ ♦ Using Internet Explorer Mobile ........................... 7-2 Changing View settings .
7-2 Chapter 7 Introduction Use Microsoft Internet Explorer Mobile to view Web or W AP pages in any of these ways. • During synchronization with your desktop computer , download your favorite links and mobile favorites that are stored in the Mobile Favorites sub-folder in the Internet Explorer on the desktop computer .
Pocket Internet Explorer 7-3 2. T ap Menu > Home to display the Internet Explorer Mobile with links to some useful W eb sites. 3. T ap any of the Web site buttons to go to a specific site. Changing V iew settings To change View settings: 1. T ap Menu > View then select view options.
7-4 Chapter 7 Mobile Favorites folder Only the items stored in the Mobile Favorites sub-folder on your desktop computer will be synchronized with your device.
Pocket Internet Explorer 7-5 4. If you want to download the pages that are linked to the mobile favorite you just created, in Internet Explorer on the desktop computer , click Favorites > Mobile Favorites , then right- click a specific mobile favorite item, then click Properties .
7-6 Chapter 7 V iewing mobile favorites and channels To view mobile favorites and channels: 1. T ap Menu > Favorites to display your list of favorites. 2. T ap a Favorites page that you wish to view . Y ou will see the page that was downloaded the last time you synchronized with your desktop computer .
Pocket Internet Explorer 7-7 Adding/Deleting mobile favorites and folders To add a favorite: 1. T ap Menu > Favorites > Add/Delete tab. 2. T ap the Add button to show the Add Favorite screen. 3. T ype a name for the favorite that you wish to add in the Name field.
Get connected 8-1 Chapter 8 Get connected ♦ ♦ ♦ ♦ ♦ Introduction ........................................................... 8-2 ♦ ♦ ♦ ♦ ♦ Connect to the Internet ........................................ 8-2 ♦ ♦ ♦ ♦ ♦ Connect to Work .
8-2 Chapter 8 Introduction Y ou can set up connections to the Internet and corporate network at work to do such activities as browse the Internet or intranet, send and receive e- mail and instant messages, and synchronize information using ActiveSync.
Get connected 8-3 Connect to W ork 1. Obtain the following information from your network administrator: server phone number , user name , and password . 2. T ap > Settings > Connections tab > Connections . 3. Under My Work Network , set up either a modem, network card, wireless network, or VPN server connection.
8-4 Chapter 8 VPN server connections A VPN connection helps you to securely connect to servers, such as a corporate network, via the Internet. Ask your network administrator for your user name, password, domain name, TCP/IP settings, and host name or IP address of the VPN server .
Get connected 8-5 Network card connections Use a network (Ethernet) card to connect directly to a network. Once connected, you can view the Internet or intranet, or download e-mail. Y ou do not need to create a new connection on your device. For more information, see your network administrator .
8-6 Chapter 8 End a connection • When connected via modem or VPN, tap on the navigation bar , then tap Disconnect. • When connected via cable or cradle, detach your device from the cable or cradle. • When connected via Infrared, move the device away from the other computer or device.
Get connected 8-7 Use dialing rules Additional numbers may need to be dialed depending on your given location when connecting. For example, if you want to dial from work, a 9 prefix must often be dialed, or an area code is needed.
8-8 Chapter 8 Infrared (IR) connection Setting beam options To set the beam options: 1. T ap > Settings > Connections tab. 2. T ap Beam icon to display the Settings screen. 3. By default, your device detects incoming infrared (IR) beams and prompts you to accept them.
Get connected 8-9 Sending infrared beams To send a file via infrared beam: 1. T ap and hold a file to beam, then tap Beam File... from the pop-up menu. 2. Align the IR ports of the devices so that they are unobstructed and within a close range. If the ports are not aligned, a message appears asking you to do so.
Bluetooth ® 9-1 Chapter 9 Bluetooth ® ♦ ♦ ♦ ♦ ♦ Introducing Bluetooth ® ................................................................ 9-2 Bluetooth icon .......................................................................... 9-2 ♦ ♦ ♦ ♦ ♦ Bluetooth settings .
9-2 Chapter 9 Introducing Bluetooth ® Bluetooth is a short-range wireless communications technology . Devices with Bluetooth capabilities can exchange information over a distance of about 10 meters (30 feet) without requiring a physical connection. Unlike infrared, you do not need to line up the devices to beam information with Bluetooth.
Bluetooth ® 9-3 Bluetooth settings To configure the Bluetooth settings: 1. T ap from the lower right corner of the T oday screen to display the Bluetooth menu. 2. T ap Bluetooth Settings . 3. T ap one of the tabs at the bottom of the Settings screen to make your desired changes.
9-4 Chapter 9 Services About Displays the Bluetooth™ for Windows ® CE (BTW-CE) software information. T ap the Advanced button to display information about the individual software modules that make up BTW-CE. The information on this screen is not configurable.
Bluetooth ® 9-5 Bluetooth Manager The Bluetooth Manager allows you to create, manage, and use Bluetooth to connect to remote devices. To launch the Bluetooth Manager: 1. T ap from the lower right corner of the T oday screen to display the Bluetooth menu.
9-6 Chapter 9 Bluetooth Connection Wizard The Bluetooth Connection Wizard helps you set up connections with remote Bluetooth devices. To launch the Bluetooth connection wizard: 1. T ap New from the Bluetooth Manager command bar . The Bluetooth Connection Wizard screen appears.
Bluetooth ® 9-7 Remote device services W ireless serial port Using a Bluetooth serial port is equivalent to using a physical cable serial port connection between two devices. As with a physical connection, you have to configure the application that will use the serial port.
9-8 Chapter 9 Dial-up networking The Dial-up Networking feature allows you to connect to a remote computer through a phone line. Once connected, you can browse the Internet, check/read emails, etc.
Bluetooth ® 9-9 Bluetooth File Explorer The Bluetooth File Explorer appears automatically after a file transfer connection is established. This service feature allows you to do the following operatio.
9-10 Chapter 9 To create a folder on the remote device: 1. Select the folder in which you wish to place the new folder . 2. From the File menu, tap Create a Folder . 3. Enter a name for the new folder while the default name New Folder is highlighted. To send a file to the remote device: 1.
Bluetooth ® 9-11 To set a local folder for incoming files: 1. From the T ools menu, tap Set Local Folder . 2. Use the drop-down menu at the top of the screen to go to your desired folder . 3. T ap OK to return to the main screen of Bluetooth File Explorer .
9-12 Chapter 9 Send via Bluetooth Y ou can conveniently send your Pocket Outlook contacts, calendar items, and tasks individually or collectively to the remote device via Bluetooth. To send data via Bluetooth: 1. T ap , then either Contacts, Calendar , or T asks.
Bluetooth ® 9-13 Dial via Bluetooth The Dial via Bluetooth option allows you to select a contact from the Pocket Outlook contacts list, and have your paired cell phone dial the contact’s phone number . If a contact has more than one phone number , select the number that you wish to dial.
9-14 Chapter 9 Bluetooth Personal Area Network A Bluetooth personal area network is a private, temporary , ad-hoc network of up to eight (8) devices. A Bluetooth personal area network allows you to easily exchange information that normally requires a TCP/IP network.
Bluetooth ® 9-15 To join a personal network: 1. From the Bluetooth Manager , select New > Join a personal network . 2. On the wizard screen, select Join a personal network , then tap Next .. 3. Select the host of the personal network, then tap Next to establish a connection to the personal area network.
9-16 Chapter 9.
Using Wi-Fi ® 10-1 Chapter 10 Using W i-Fi ® ♦ ♦ ♦ ♦ ♦ Introducing Wi-Fi ® .............................................. 10-2 ♦ ♦ ♦ ♦ ♦ Accessing the Wi-Fi feature .............................. 10-2 ♦ ♦ ♦ ♦ ♦ Using Wi-Fi .
10-2 Chapter 10 Introducing Wi-Fi ® MyPal comes with a built-in Wireless Fidelity (Wi-Fi ® ) feature that allows you to connect to wireless local area networks and the Internet.
Using Wi-Fi ® 10-3 3. From the list of detected wireless networks, select a wireless network to you want to connect your device. 4. Select either The Internet or Work for the network to connect your device. 5. T ap Connect . The device connects to the selected network.
10-4 Chapter 10 To configure a network adapter: 1. T ap the Network Adapters tab. 2. Make your desired changes to the available adapters on the list. 3. T ap OK when done. Adding a wireless network If the device fails to auto-detect the wireless network you want to connect, you can add the network provided you know the wireless network settings.
Using Wi-Fi ® 10-5 2. T ap Add New ... from the wireless networks field. 3. Use the input panel to key-in the Network name . 4. Select The Internet or Work network you wish to connect to through the wireless network.
10-6 Chapter 10 8. The created wireless network is displayed in the list of wireless networks. T ap the wireless network to connect. Network association To associate with one of the detected wireless networks: 1. T ap and hold on a wireless network, then tap Connect from the pop-up menu.
Using Wi-Fi ® 10-7 W i-Fi information Y ou can view the Wi-Fi information by tapping , and selecting Wi-Fi Information from the menu. NOTE Y ou can view the Wi-Fi information even when the device is disconnected from a wireless network.
10-8 Chapter 10 Status This field shows the Wi-Fi connection status. • Connected - the station is associated with one wireless LAN device. This status also indicates the MAC address of the device. • Disconnected -a previous link existed but no beacon was received.
Using Wi-Fi ® 10-9 ESSID This column shows the Extended Service Set Indenfier (ESSID) of the wireless network found in the search. CH This column shows the channel used by the wireless device.
10-10 Chapter 10 RSSI This column shows the Received Signal Strength Indication (RSSI) transmitted by each wireless network. This information is helpful in determining which network you wish to associate your device. This signal is normally represented by a dBm value .
Using Wi-Fi ® 10-11 About This page displays the Wi-Fi utility and driver version information of your Wi-Fi device. For updated product information, technical support, and downloads, visit the ASUS web site at http://www .
10-12 Chapter 10.
Notices A-1 Appendix Notices ♦ ♦ ♦ ♦ ♦ Federal Communications Commission Statement .............................................................. A-2 ♦ ♦ ♦ ♦ ♦ Canadian Department of Communications Statement .......................
A-2 Appendix Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation.
Notices A-3 UL Safety Notices Required for UL 1459 covering telecommunications (telephone) equipment intended to be electrically connected to a telecommunication network that has an operating voltage .
A-4 Appendix.
Ein wichtiger Punkt beim Kauf des Geräts Asus 632 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Asus 632 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Asus 632 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Asus 632 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Asus 632 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Asus 632 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Asus 632 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Asus 632. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Asus 632 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
