Benutzeranleitung / Produktwartung G41C-S des Produzenten Asrock
Zur Seite of 53
1 1 1 1 1 G41C-GS / G41C-S User Ma nual V ersion 1.0 Published December 2009 Copyright©2009 ASRock INC. All rights reserved..
2 2 2 2 2 Copyright Notice: Copyright Notice: Copyright Notice: Copyright Notice: Copyright Notice: No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purcha ser for ba ckup purpose, without written con sent of ASRock Inc.
3 3 3 3 3 Contents Contents Contents Contents Contents 1 Introduction 1 Introduction 1 Introduction 1 Introduction 1 Introduction ................................................... ................................................... .................
4 4 4 4 4 3.7 Security Screen ............................................................ 51 3.8 Exit Screen .................................................................... 52 4 Software Support 4 Software Support 4 Software Support 4 Software Support 4 Software Support .
5 5 5 5 5 Chapter 1 Introduction Chapter 1 Introduction Chapter 1 Introduction Chapter 1 Introduction Chapter 1 Introduction Tha nk you for purcha sing ASRock G41C-GS / G41C-S motherboard, a relia ble motherboard produced under ASRock’s consistently stringent quality control.
6 6 6 6 6 1.2 1.2 1.2 1.2 1.2 Specifications Specifications Specifications Specifications Specifications Platform - Micro A TX Form Fa ctor: 9.6-in x 7.
7 7 7 7 7 - 1 x Serial Port: COM1 - 1 x V GA Port - 4 x Ready-to-Use USB 2.0 Ports - 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED) - HD Audio Ja ck: Line in / Front Speaker / M icrophone Connector - 4 x SA T AII 3.
8 8 8 8 8 CAUTION! 1. About the setting of “Hyper Thre ading T echnology”, plea se check page 36. 2. This motherboard supports U ntied Overclocking T e chnology . Plea se read “U ntied Overclocking T echnology” on page 26 f or details. 3. This motherboard supports Dual Cha nnel Me mory T echnology .
9 9 9 9 9 8. Power Management for USB 2.0 works fine under Microsoft ® Windows ® 7 64-bit / 7 / Vista TM 64-bit / Vista TM / XP 64-bit / XP SP1 or SP2.
10 10 10 10 10 15 . EuP , stands f or Energy Using Product, was a provision regulated by European Union to define the power consumption for the completed system. According to EuP, the total AC power of the completed system shall be under 1.00W in off mode condition.
11 11 11 11 11 1.3 Motherboard Layout (G41C-GS / G41C-S) 1.3 Motherboard Layout (G41C-GS / G41C-S) 1.3 Motherboard Layout (G41C-GS / G41C-S) 1.3 Motherboard Layout (G41C-GS / G41C-S) 1.3 Motherboard Layout (G41C-GS / G41C-S) 1 PS2_USB_PWR1 Jumper 1 6 Pri mary SA T AII Connector (SA T AII_1; Red) 2 A TX 12V Conne ctor (A TX12V2) 1 7 USB 2.
12 12 12 12 12 1.4 I/O Panel (G41C-GS) 1.4 I/O Panel (G41C-GS) 1.4 I/O Panel (G41C-GS) 1.4 I/O Panel (G41C-GS) 1.4 I/O Panel (G41C-GS) 1 PS/2 Mouse Port (Green) 6 USB 2.
13 13 13 13 13 LAN Port LED Indications Activity/Link LED SPEED LED Status Description Status Description Off No Activity Off 10Mbps connection Blinking Data Activity Ora nge 100Mbps connection LAN Port ACT/LINK LED SPEED LED T o enable Multi-Stre a ming function, you need to connect a front pa nel audio cable to the front panel audio header.
14 14 14 14 14 Chapter 2 Installation Chapter 2 Installation Chapter 2 Installation Chapter 2 Installation Chapter 2 Installation G41C-GS / G41C-S is a Micro A TX form fa ctor (9.6" x 7.8", 24.4 x 19.8 cm) motherboard. Before you install the motherboard, study the configuration of your cha ssis to ensure that the motherboard fits into it.
15 15 15 15 15 Lift Lever Up to 90° CPU Marked Corner Socket Marked Corner 2.3 CPU Installation 2.3 CPU Installation 2.3 CPU Installation 2.3 CPU Installation 2.3 CPU Installation For the installation of Intel 775-LAND CPU, plea se follow the steps below .
16 16 16 16 16 For proper inserting, ple a se ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket. Step 2-3. Carefully pla ce the CPU into the socket by using a purely vertical motion. Step 2-4. V erify that the CPU is within the socket and properly mated to the orient keys.
17 17 17 17 17 2.4 2.4 2.4 2.4 2.4 Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink This motherboard is equipped with 775-Pin socket that supports Intel 775-LAND CPU.
18 18 18 18 18 1. If you want to install two memory modules, for optimal compatibility and reliability, it is recommended to install them in the slots of the sa me color . In other words, install them in the set of blue slots (DDR3_A1 and DDR3_B1), or in the set of yellow slots (DDRII_1 and DDRII_2).
19 19 19 19 19 notch break Installing a DIMM Installing a DIMM Installing a DIMM Installing a DIMM Installing a DIMM Plea se make sure to disconnect power supply before a dding or removing DIMMs or the system components. Step 1. Unlock a DIMM slot by pressing the retaining clips outward.
20 20 20 20 20 2.6 Expansion Slots (PCI and PCI Express Slots) 2.6 Expansion Slots (PCI and PCI Express Slots) 2.6 Expansion Slots (PCI and PCI Express Slots) 2.6 Expansion Slots (PCI and PCI Express Slots) 2.6 Expansion Slots (PCI and PCI Express Slots) There are 2 PCI slots and 2 PCI Express slots on this motherboard.
21 21 21 21 21 2.7 Jumpers Setup 2.7 Jumpers Setup 2.7 Jumpers Setup 2.7 Jumpers Setup 2.7 Jumpers Setup The illustration shows how jumpers are setup. When the jumper ca p is placed on pins, the jumper is “Short”. If no jumper ca p is pla ced on pins, the jumper is “Open”.
22 22 22 22 22 2.8 Onboard Headers and Connectors 2.8 Onboard Headers and Connectors 2.8 Onboard Headers and Connectors 2.8 Onboard Headers and Connectors 2.8 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper ca ps over these hea ders and connectors.
23 23 23 23 23 1. High Definition Audio supports Jack Sensing, but the panel wire on the cha ssis must support HDA to function correctly . Plea se follow the instruction in our ma nual a nd cha ssis manual to in stall your system. 2. If you use AC’97 audio panel, plea se install it to the front panel audio hea der as below: A.
24 24 24 24 24 20-Pin A TX Power Supply Installation A TX 12V Connector Plea se note that it is necessary (4-pin A TX12V2) to connect a power supply with (see p.1 1 No. 2) A TX 12V plug to this connector so that it can provides sufficient power. Failing to do so will cause the failure to power up.
25 25 25 25 25 2.9 2.9 2.9 2.9 2.9 SA SA SA SA SA T T T T T AII Hard Disk Setup Guide AII Hard Disk Setup Guide AII Hard Disk Setup Guide AII Hard Disk Setup Guide AII Hard Disk Setup Guide Before in stalling SA T AII hard disk to your computer , plea se carefully read below SA T AII hard disk setup guide.
26 26 26 26 26 2.10 2.10 2.10 2.10 2.10 Serial A Serial A Serial A Serial A Serial A T T T T T A (SA A (SA A (SA A (SA A (SA T T T T T A) / Serial A A) / Serial A A) / Serial A A) / Serial A A) / Seri.
27 27 27 27 27 Chapter 3: BIOS SETUP UTILITY Chapter 3: BIOS SETUP UTILITY Chapter 3: BIOS SETUP UTILITY Chapter 3: BIOS SETUP UTILITY Chapter 3: BIOS SETUP UTILITY 3.1 Introduction 3.1 Introduction 3.1 Introduction 3.1 Introduction 3.1 Introduction This section explains how to use the BIOS SETUP UTILITY to configure your system.
28 28 28 28 28 3.1.2 3.1.2 3.1.2 3.1.2 3.1.2 Navigation Keys Navigation Keys Navigation Keys Navigation Keys Navigation Keys Plea se check the following table f or the function description of ea ch navigation key.
29 29 29 29 29 G41C-S System Time [Hour:Minute:Second] Use this item to specify the system time. System Date [Day Month/Date/Y ear] Use this item to specify the system date.
30 30 30 30 30 BIOS SETUP UTILITY Main Advanced H/W Monitor Boot Security Exit Select Screen Select Item Enter Go to Sub Screen F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.
31 31 31 31 31 BIOS SETUP UTILITY DRAM Timing Control Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.
32 32 32 32 32 Ratio CMOS Setting If the ratio status is unlocked, you will find this item a ppear to allow you changing the ratio value of this motherboard. If the CPU you adopt supports EIST (Intel (R) SpeedStep(tm) tech.), and you plan to adjust the ratio value, plea se disable the option “ Intel (R) SpeedStep(tm) te ch.
33 33 33 33 33 Would you like to save current setting user defaults? In this option, you are allowed to load and save three user defaults a ccording to your own requirements.
34 34 34 34 34 BIOS SETUP UTILITY Main OC T weaker H/W Monitor Boot Security Exit Select Screen Select Item Enter Go to Sub Screen F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.
35 35 35 35 35 BIOS SETUP UTILITY CPU Configuration Select the over clock mode. Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.
36 36 36 36 36 CPU Thermal Throttling Y ou may select [Enabled] to enable P4 CPU internal thermal control mecha- nism to keep the CPU from overheated. This option will be hidden if the current CPU does not support CPU Thermal Throttling.
37 37 37 37 37 DRAM RCOMP and tRD Configuration BIOS SETUP UTILITY DRAM RCOMP STRENGTH Settings Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
38 38 38 38 38 DRAM CH0 G3 (Control2) This controls the number of DRAM CH0 G3 (Control2). Min: 1. M ax: 15. The default value is [Auto]. DRAM CH0 G4 (Clocks1) This controls the number of DRAM CH0 G4 (Clocks1). Min: 1. M ax: 15. The default value is [Auto].
39 39 39 39 39 DRAM DLL SKEW Configuration BIOS SETUP UTILITY DRAM DLL SKEW Settings Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.
40 40 40 40 40 DRAM CH1 CMD SKEW This controls the number of DRAM CH1 CMD SKEW . The default value is [Auto]. DRAM CH1 CTRL0 SKEW This controls the number of DRAM CH1 CTRL0 SKEW . The default value is [Auto]. DRAM CH1 CTRL1 SKEW This controls the number of DRAM CH1 CTRL1 SKEW .
41 41 41 41 41 Flex Mode Operation This allows you to enable or disable flex mode operation feature. The default value is [Enabled]. Configuration options: [Enabled] and [Disabled]. Intelligent Energy Saver Intelligent Energy Saver is a revolutionary technology that delivers unparalleled power savings.
42 42 42 42 42 BIOS SETUP UTILITY ACPI Configuration Select auto-detect or disable the STR feature. Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
43 43 43 43 43 [S A T A 1, SA T A 2, [S A T A 1, SA T A 3, [IDE 1, SA T A 2, S A T A 3, SA T A 4 ] IDE 1] SA T A 4] Ma ster SA T AII 1, SA T AII 2 S A T AII 1 SA T AII 2 Slave SA T AII 3, SA T AII 4 SA T AII 3 SA T AII 4 BIOS SETUP UTILITY Storage Configuration Set [Compatible] when Legacy OS (MS-DOS, Win NT) device is used.
44 44 44 44 44 TYPE Use this item to configure the type of the IDE device that you specify. Configuration options: [Not In stalled], [Auto], [CD/D V D], and [ARMD]. [Not Installed]: Select [Not Installed] to disable the use of IDE device. [Auto]: Select [Auto] to automatically detect the hard disk drive.
45 45 45 45 45 DMA Mode DMA ca pability allows the i mproved tran sfer-speed a nd data-integrity for compatible IDE devices. S.M.A.R.T. Use this item to ena ble or disable the S.M.A.R.T . (Sel f-Monitoring, Analysis, a nd Reporting T echnology) feature.
46 46 46 46 46 3.4.6 3.4.6 3.4.6 3.4.6 3.4.6 Floppy Configuration Floppy Configuration Floppy Configuration Floppy Configuration Floppy Configuration In this section, you may configure the type of your floppy drive. BIOS SETUP UTILITY Floppy Configuration Select the type of floppy drive connected to the system.
47 47 47 47 47 3.4.7 3.4.7 3.4.7 3.4.7 3.4.7 Super IO Configuration Super IO Configuration Super IO Configuration Super IO Configuration Super IO Configuration Serial Port Address Use this item to set the address for the onboard serial port or disable it.
48 48 48 48 48 BIOS SETUP UTILITY USB Configuration T o enable or disable the onboard USB controllers. Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
49 49 49 49 49 3.5 3.5 3.5 3.5 3.5 Hardware Health Event Monitoring Screen Hardware Health Event Monitoring Screen Hardware Health Event Monitoring Screen Hardware Health Event Monitoring Screen Hardw.
50 50 50 50 50 3.6 3.6 3.6 3.6 3.6 Boot Screen Boot Screen Boot Screen Boot Screen Boot Screen In this section, it will display the available devices on your system for you to config- ure the boot settings and the boot priority. 3.6.1 3.6.1 3.6.1 3.6.
51 51 51 51 51 3.7 3.7 3.7 3.7 3.7 Security Screen Security Screen Security Screen Security Screen Security Screen In this section, you may set or cha nge the supervisor/user pa ssword for the syste m. For the user pa ssword, you may also clear it. BIOS SETUP UTILITY Main OC T weaker Advanced H/W Monitor Boot Exit Install or Change the password.
52 52 52 52 52 BIOS SETUP UTILITY Main OC T weaker Advanced H/W Monitor Boot Security Exit system setup after saving the changes. F10 key can be used for this operation. Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit F9 Load Defaults v02.
53 53 53 53 53 Chapter 4 Sof Chapter 4 Sof Chapter 4 Sof Chapter 4 Sof Chapter 4 Sof tware Suppor tware Suppor tware Suppor tware Suppor tware Suppor t t t t t 4.
Ein wichtiger Punkt beim Kauf des Geräts Asrock G41C-S (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Asrock G41C-S noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Asrock G41C-S - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Asrock G41C-S reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Asrock G41C-S erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Asrock G41C-S besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Asrock G41C-S verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Asrock G41C-S. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Asrock G41C-S gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
