Benutzeranleitung / Produktwartung WNDR3400-100NAS des Produzenten NETGEAR
Zur Seite of 48
March 2010 208-10532-03 v1.0 NETGEAR , Inc. 350 E. Plumeria Drive San Jose, CA 95134 USA N600 Wireless Dual Band Router WNDR3400 Setup Manual.
ii Trademarks NETGEAR and the NETGEAR logo are registered trademarks, and Smart Wizard is a trademark of NETGEAR. Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their respective holders.
Contents iii Contents Getting to Know Your Wireless Router ................................................................................ 1 Unpacking Your New Wireless Router ..........................................................................
Getting to Know Your Wireless Router 1 Getting to Know Your Wireless Router Congratulations on your purchase of the NETGEAR® N600 Wireless Dual Band Router WNDR3400. Before you begin installing your router, check the package contents (see “Unpacking Your New Wireless Router” on page 1 ).
N600 Wireless Dual Band Router WNDR3400 Setup Manual Getting to Know Your Wireless Router 2 2. Set up your wireless router by inserting the router into the stand supplied with your router. 3. Place your router in an area suitable for installation (near an AC power outlet and accessible to the Ethernet cables for your wired computers).
N600 Wireless Dual Band Router WNDR3400 Setup Manual Getting to Know Your Wireless Router 3 Front Panel You can use the status lights on the front of the wireless router to verify various conditions. Figure 2 Table 1. Status Light Descriptions Item Function Activity Description 1.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Getting to Know Your Wireless Router 4 4. USB Solid Green The USB device has been accepted by the Router and is ready to be used.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Getting to Know Your Wireless Router 5 Back Panel The rear panel of the WNDR3400 router contains the items in the list that follows the figure. The back of the wireless router includes: 1. AC power adapter outlet 2.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Getting to Know Your Wireless Router 6 Top Panel The top of the wireless router includes a dome that performs two functions: 1.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Getting to Know Your Wireless Router 7 Router Label View the label on the bottom of the wireless router to identify the serial number, port connectors, status lights, and default login information.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Getting to Know Your Wireless Router 8 • Away from any large metal surfaces, such as a solid metal door or aluminum studs. Large expanses of other materials such as glass, insulated walls, fish tanks, mirrors, brick, and concrete can also affect your wireless signal.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Getting to Know Your Wireless Router 9 2. Set up your wireless router for Internet access (see “Setting Up Your Router for Internet Access” on page 17 ).
Installing Your Wireless Router Using Smart Wizard 10 Installing Your Wireless Router Using Smart Wizard Prepare the following before you set up your router make sure that: • You are using a PC with.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Installing Your Wireless Router Using Smart Wizard 11 2. When the Smart Wizard prompts you to Check for Firmware Updates, click Yes to check the NE.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Installing Your Wireless Router Using Smart Wizard 12.
Installing Your Wireless Router Manually (Advanced and Linux Users) 13 Installing Your Wireless Router Manually (Advanced and Linux Users) Before installing and connecting your router manually, review the list below and make sure that you have all of the necessary information.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Installing Your Wireless Router Manually (Advanced and Linux Users) 14 of your computer. If you are unsure about this, refer to the documentation for your computer or see the link to TCP/IP Addressing in “Related Documents” on page 43 .
N600 Wireless Dual Band Router WNDR3400 Setup Manual Installing Your Wireless Router Manually (Advanced and Linux Users) 15 4. Locate the cable you removed from the modem in step 2. Securely insert that cable ( 4 ) into a LAN port on the router such as LAN port 1.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Installing Your Wireless Router Manually (Advanced and Linux Users) 16 2. Now, plug the power cord into your wireless router and into a power outlet.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Installing Your Wireless Router Manually (Advanced and Linux Users) 17 • Internet . The Internet port light ( 5 ) should be lit. If it is not, make sure that the Ethernet cable is securely attached to the wireless router Internet port and that the modem, and that the modem is powered on.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Installing Your Wireless Router Manually (Advanced and Linux Users) 18 A login window such as the one in the following figure opens: 2. For security reasons, the router has its own user name and password.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Installing Your Wireless Router Manually (Advanced and Linux Users) 19 5. From the main menu, select Setup Wizard . The Setup Wizard screen will display. 6. Select No to set up the connection yourself.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Installing Your Wireless Router Manually (Advanced and Linux Users) 20 If you do not connect successfully: • Review your settings and make sure that you have selected the correct options and typed everything correctly.
Configuring Your Wireless Network 21 Configuring Your Wireless Network After installing your router, you must log into the router to complete your wireless setup. When you log in to the browser, you will be prompted to check for firmware updates from the NETGEAR update server.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Configuring Your Wireless Network 22 A login window similar to the one shown below will display. 2. When prompted, enter the default Password ( admin is the default router User Name and password is the default router Password), both in lowercase letters.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Configuring Your Wireless Network 23 Configuring Your Wireless Settings and Security Options The wireless network settings of the router must match the wireless network settings of any wireless devices that connect wirelessly to the router (such as wireless adapter cards and wireless computers).
N600 Wireless Dual Band Router WNDR3400 Setup Manual Configuring Your Wireless Network 24 Setting Your SSID and Wireless Security To specify the wireless settings, you must know the following: • Name (2.4GHz b/g/n SSID). The default is NETGEAR . • Name (5GHz a/n SSID).
N600 Wireless Dual Band Router WNDR3400 Setup Manual Configuring Your Wireless Network 25 b. Select the operating channel for the wireless mode. The default channel is 36. If there is an Auto option in the channel list and you select it, the router will find the best operating channel available.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Configuring Your Wireless Network 26 To access the Internet from any computer connected to your wireless router, launch a browser such as Microsoft Internet Explorer or Mozilla Firefox. You should see the wireless router’s Internet LED blink, indicating communication to the ISP.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Configuring Your Wireless Network 27 While the router is in WPS enable mode (a maximum of 2 minutes), wireless security is not enabled. 3. While the dome lights are blinking, you have 2 minutes to enable WPS on the device you are connecting to.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Configuring Your Wireless Network 28 Testing Basic Wireless Connectivity Once you have established basic wireless connectivity and enabled security settings appropriate to your needs, you can test connectivity between devices connected to your router.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Configuring Your Wireless Network 29 Your wireless router is now configured to provide Internet access for your network. Your wireless router automatically connects to the Internet when one of your computers requires access.
Troubleshooting 30 Troubleshooting This chapter gives information about troubleshooting your wireless router. You can find help with the following problems: • “Basic Setup Checklist” on page 30 .
N600 Wireless Dual Band Router WNDR3400 Setup Manual Troubleshooting 31 Make sure that the network settings of the computer are correct: 1. Verify that your LAN-connected computers are configured to obtain an IP address automatically through DHCP. For help with this, see the documentation for your computer or “Related Documents” on page 43 .
N600 Wireless Dual Band Router WNDR3400 Setup Manual Troubleshooting 32 If the correct behavior does not occur, check for a remedy from the following table. Table 2. Troubleshooting the router’s LED behavior LED Behavior Recommended Action Power light is off.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Troubleshooting 33 For more information on WPS functionality and advanced features, see the online Reference Manual.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Troubleshooting 34 • Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using Internet Explorer, click Refresh to be sure that the Java applet is loaded. Try closing the browser and starting it again.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Troubleshooting 35 If your router is unable to obtain an IP address from the your service provider, the problem might be one of the following: • Your service provider might require a login. Ask your service provider whether they require PPP over Ethernet (PPPoE) login.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Troubleshooting 36 Troubleshooting Internet Browsing If your wireless router can obtain an IP address but your computer is unable to load any Web pages from the Internet, check the following. • Your computer might not recognize any DNS server addresses.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Troubleshooting 37 1. From the Windows toolbar, click Start and select Run. 2. In the field provided, type Ping followed by the address of the router, as in this example: ping www.routerlogin.net or ping 192.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Troubleshooting 38 • Check that your PC has the IP address of your router listed as the default gateway. If the IP configuration of your PC is assigned by DHCP, this information is not visible in your PC’s Network Control Panel.
Technical Specifications 39 Technical Specifications Default Configuration Settings This section provides factory default settings and technical specifications for the N600 Wireless Dual Band Router WNDR3400.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Technical Specifications 40 Firewall Inbound (communications coming in from the Internet) Disabled (bars all unsolicited requests) Outbound (communications going out to the Internet) Enabled (all) Wireless Wireless Communication Enabled Name (2.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Technical Specifications 41 Physical Specifications Dimensions 28 x 175 x 119 mm (1.1 x 6.89 x 4.68 in.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Technical Specifications 42 Restoring the Default Password and Configuration Settings You can restore the factory default configuration settings that reset the router’s user name to admin, the password to password, and the IP address to 192.
Related Documents 43 Related Documents This table provides links to reference documents that you can use to gain a more complete understanding of the technologies used in your NETGEAR product. Document Link TCP/IP Networking Basics http://documentation.
N600 Wireless Dual Band Router WNDR3400 Setup Manual Related Documents 44.
45 Registration and Certifications Product Registration, Support, and Documentation Register your product at http://www.NETGEAR.com/register . You must register before you can use our telephone support service. Product updates and Web support are always available by going to http://www.
Ein wichtiger Punkt beim Kauf des Geräts NETGEAR WNDR3400-100NAS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NETGEAR WNDR3400-100NAS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NETGEAR WNDR3400-100NAS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NETGEAR WNDR3400-100NAS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NETGEAR WNDR3400-100NAS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NETGEAR WNDR3400-100NAS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NETGEAR WNDR3400-100NAS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NETGEAR WNDR3400-100NAS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NETGEAR WNDR3400-100NAS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
