Benutzeranleitung / Produktwartung WIRELESS-G ROUTER WGR614V10 des Produzenten NETGEAR
Zur Seite of 122
202-10585-01 February 2010 NETGEAR , Inc. 350 East Plumeria Drive San Jose, CA 95134 USA W ireless-G Router WGR614v10 Reference Manual.
v1.0, February 2010 ii © 2010 by NETGEAR, Inc. All rights reserved. T echnical Support Please refer to the support informat ion card that shipped with your prod uct. When you register your product at http://www .netgear .com/r egister , we can pr ovide you with faster expert te chnical support and timel y notices o f product and software upgrades.
v1.0, February 2010 iii 2. This device must accept any inte rference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user ’ s authority to operate this equipment.
v1.0, February 2010 iv Bestätigung des Herstellers/Importeurs Es wird hiermit bestätigt, daß da s W ireless-G Router Model WGR614v10 gemäß der im BMPT -AmtsblVfg 243/1991 und Vfg 46/1992 aufgeführten B estimmungen entstört ist. Das vorschriftsmäßige Betrei ben einiger Geräte (z.
v1.0, February 2010 v Certificate of the Manufacturer/Importer It is hereby certified that the W ire less-G Router Model WG R614v10 has been suppressed in accordance with the conditions set out in the BMPT -AmtsblVfg 243/1991 and Vf g 46/1992.
vii v1.0, February 2010 Content s About This Manual Conventions, Formats, and Scope .................. ................ ............. ................ ................ .... xi How to Print This Manual ............ ................. ............ ......
Wireless-G Router WGR614v10 Refer ence Manual Contents viii v1.0, February 2010 Chapter 3 Restricting Access From Y our Network Content Filtering Overview . ................ ............. ................ ............. ................ ............. .
Wireless-G Router WGR614v10 Refer ence Manual Contents ix v1.0, February 2010 Configuring Port Forwarding to Local Servers .... ... ............. ... .... ... ... ... .... ............ .... ... ... .. 5-6 Adding a Custom Service ...... .... ... ... ..
Wireless-G Router WGR614v10 Refer ence Manual Contents x v1.0, February 2010 Solving Wireless Connection Problems ................. ................ ................. ................ ........ 7-9 Using Y our Wireless Card Setup Program ......... ....
xi v1.0, February 2010 About This Manual The user manual provides in formation for configuring the features of the NETGEAR ® W ireless-G Router Model WGR614v10 beyond initial configuration settings. In itial configuration instructions can be found in the NETGEAR W ir eless-G Router WGR614v10 Setup Manual .
Wireless-G Router WGR614v10 Refer ence Manual About This Manual xii v1.0, February 2010 • Scope . This manual is written for the W ireless-G Ro uter according to th ese specifications: For more information abou t network, Internet, firewall, and VP N technologies, c lick the links to the NETGEAR website in Appendix B, “Related Documents .
Wireless-G Router WGR614v10 Refer ence Manual About This Manual xiii v1.0, February 2010 Revision History NETGEAR, Inc. is constantly se arching for ways to improve it s pr oducts and documentatio n. The following table indicates any changes that might have been made since the W ireless-G Router was introduced.
1-1 v1.0, February 2010 Chapter 1 Configuring Basic Connectivity This chapter describes the settings for your Internet connection and your wireless l ocal area network (LAN) connection.
Wireless-G Router WGR614v10 Refer ence Manual Configuring Basic Connectivity 1-2 v1.0, February 2010 Logging In to Y our Wireless Router When the wireless router is connected to your network, you can access and configure the router using your browser .
Wireless-G Router WGR614v10 Refer ence Manual Configuring Basic Connectivity 1-3 v1.0, February 2010 The Checking for Firmware Updates screen a ppears unless you previously cleared the Check for Updated Firmwar e Upon Log-in check box. This message displa ys if the router discovers that ne w firmware is available.
Wireless-G Router WGR614v10 Refer ence Manual Configuring Basic Connectivity 1-4 v1.0, February 2010 If the wireless router is connected to the Internet, you can select Knowledge Base or Documentation under W eb Support in the main menu to view support information or the documentation for the wireless router.
Wireless-G Router WGR614v10 Refer ence Manual Configuring Basic Connectivity 1-5 v1.0, February 2010 Selecting a Language for Y our Screen Display Using the Select Language dro p-down menu, located in.
Wireless-G Router WGR614v10 Refer ence Manual Configuring Basic Connectivity 1-6 v1.0, February 2010 The language yo u select is then downloaded and display ed in the language selection box, an d your screen display will be in the selected language.
Wireless-G Router WGR614v10 Refer ence Manual Configuring Basic Connectivity 1-7 v1.0, February 2010 Y our Internet Connection Does Not Require a Login If no login is required by your ISP , the followi ng settings appear in the Basic Settings screen. • Account Name (might also be called Host Name).
Wireless-G Router WGR614v10 Refer ence Manual Configuring Basic Connectivity 1-8 v1.0, February 2010 • Internet IP Address . Determines how your router obtains an IP address for Internet access. – If your ISP assigns an IP address dynamically (by DHCP), sele ct Get Dynamically From ISP .
Wireless-G Router WGR614v10 Refer ence Manual Configuring Basic Connectivity 1-9 v1.0, February 2010 Y our Internet Connection Does Require a Login If a login is required by your ISP , the following s.
Wireless-G Router WGR614v10 Refer ence Manual Configuring Bas ic C onne ct i vity 1-10 v1.0, February 2010 – PPTP (Point to Point T unneling Protocol), used primarily in Austrian DSL services – T .
Wireless-G Router WGR614v10 Refer ence Manual Configuring Bas ic C onne ct i vity 1-11 v1.0, February 2010 • Idle Timeout . Y our Internet connection is logged out if there is no data transfer du ring the specified time interval. • Domain Name Server (DNS) Address .
Wireless-G Router WGR614v10 Refer ence Manual Configuring Bas ic C onne ct i vity 1-12 v1.0, February 2010 2. As appropriate, select the regi on in whic h the wireless interface will operate. 3. For the wireless network name (SSID), use the default name, or choose a suitable descriptive name.
Wireless-G Router WGR614v10 Refer ence Manual Configuring Bas ic C onne ct i vity 1-13 v1.0, February 2010 6. Select Wir eless Se ttings under Advanced in the main menu of the WGR614v10 router . 7. Make sure that the Enable Wir e less Router Radio, Enable SSID Broadcast, and Enable WMM check boxes are selecte d.
2-1 v1.0, February 2010 Chapter 2 Safeguarding Y our Network The W ireless-G Router Model WGR614v10 provides highly ef fective security features, which are covered in detail in this chapter .
Wireless-G Router WGR614v10 Refer ence Manual Safeguarding You r Network 2-2 v1.0, February 2010 S tronger security methods can entail a cost in terms of through put, latency , battery consumption, and equipment compatibility .
Wireless-G Router WGR614v10 Refer ence Manual Safeguarding You r Network 2-3 v1.0, February 2010 features that affect security are listed in T able 2-2 on page 2-4 . For more details on wireless security methods, see the online document “W ireless Networking Basics” in Appendix B .
Wireless-G Router WGR614v10 Refer ence Manual Safeguarding You r Network 2-4 v1.0, February 2010 Recording Basic Wireless Settings Setup Information Before customizing your wireless settings, print this section, and re cord the following information.
Wireless-G Router WGR614v10 Refer ence Manual Safeguarding You r Network 2-5 v1.0, February 2010 • Wir eless Network Name (SSID) . ___________ ______________ _____ The SSID identifies the wireless network. Y ou can use up to 32 alphanumeric characters.
Wireless-G Router WGR614v10 Refer ence Manual Safeguarding You r Network 2-6 v1.0, February 2010 Changing Wireless Security Settings This section describes the wireless settings that you can view and configure in the W ireless Settings screen, which you access under Setup in the main menu.
Wireless-G Router WGR614v10 Refer ence Manual Safeguarding You r Network 2-7 v1.0, February 2010 • Name (SSID) . The SSID is also known as the wireless network name. Enter a value of up to 32 alphanumeric characters. When more than on e wireless network is active, different wireless network names provide a way to separate the traffi c.
Wireless-G Router WGR614v10 Refer ence Manual Safeguarding You r Network 2-8 v1.0, February 2010 WEP of fers the following options: • Open System . W ith Open System authen tication and 64 or 128 bit WEP dat a encryption, the W irele ss-G Router does perform data encryption but does no t perform any authenticat ion.
Wireless-G Router WGR614v10 Refer ence Manual Safeguarding You r Network 2-9 v1.0, February 2010 • Automatic . In the Passphrase field, enter a word or g roup of printable c haracters, and click Generate . The passphrase is case- sensitive. For example, NETGEAR is not the same as nETgear .
Wireless-G Router WGR614v10 Refer ence Manual Safeguarding You r Network 2-10 v1.0, February 2010 3. In the Passphrase field, enter a word or group of 8–63 printable characters. The passphrase is case-sensitive. 4. Click Apply to save your settings.
Wireless-G Router WGR614v10 Refer ence Manual Safeguarding You r Network 2-11 v1.0, February 2010 The available settings in this screen are: • Enable SSID Broadcast . Clear this check box to disable broadcast of the SSID, so that only devices that know the correct SSID can connect.
Wireless-G Router WGR614v10 Refer ence Manual Safeguarding You r Network 2-12 v1.0, February 2010 The W ireless Card Ac cess List displa ys a list of wireless computers that you allow to connect to the router based on their MAC addresse s.
Wireless-G Router WGR614v10 Refer ence Manual Safeguarding You r Network 2-13 v1.0, February 2010 4. If the computer you want appears in the A vailabl e W ireless Cards list, you can select the radio button of that computer to capture its MAC addr ess; otherwise, you can manually enter a name and the MAC address of the authorized comput e r .
Wireless-G Router WGR614v10 Refer ence Manual Safeguarding You r Network 2-14 v1.0, February 2010 Now , only devices on this list can wirel essly connec t to the W ireless-G Router. Adding Guest Networks Adding a guest network allows visito rs at your home to use the Internet without having to know your wireless security key .
Wireless-G Router WGR614v10 Refer ence Manual Safeguarding You r Network 2-15 v1.0, February 2010 – Enable SSID Broadcast – If selected, the W ire less Access Point broadcasts its name (SSID) to all W ireless Stations . S tations can adopt the correct SSID for connections to this Access Point.
Wireless-G Router WGR614v10 Refer ence Manual Safeguarding You r Network 2-16 v1.0, February 2010 T o change the admi nistrator password: 1. On the main menu, unde r Maintenance, select Set Password to display the Set Password screen. 2. T o change the password, first enter the old password, then ente r the new password twice.
Wireless-G Router WGR614v10 Refer ence Manual Safeguarding You r Network 2-17 v1.0, February 2010 Underst anding Y our Firewall Y our W ireless-G Router Model WGR614v10 contains a true firewall to protect your network from attacks and intrusions.
3-1 v1.0, February 2010 Chapter 3 Restricting Access From Y our Network This chapter describes how to u se the content filtering and reporting features of the W ire le ss-G Router Model WGR614v10 to protect your network. Y ou can find these features by selecti ng the items under Content Filtering in the main menu of the browser interface.
Wireless-G Router WGR614v10 Refer ence Manual Restricting Access Fr om Your Network 3-2 v1.0, February 2010 • If the keyword .com is specified, only websites with othe r domain suf fixes (such as .edu, .or g, or .gov) can be viewed . T o block access to Internet sites: 1.
Wireless-G Router WGR614v10 Refer ence Manual Restricting Access Fr om Your Network 3-3 v1.0, February 2010 4. Y ou can specify one trusted user , which is a computer that is exempt from blocking and logging. Specify a trusted user by ente ring that computer ’ s IP address in the T rusted IP Address fields.
Wireless-G Router WGR614v10 Refer ence Manual Restricting Access Fr om Your Network 3-4 v1.0, February 2010 T o block by schedule, be sure to specify a time period in the Schedule screen. For information about scheduling, see “Schedulin g Blo cking” on page 3-5 .
Wireless-G Router WGR614v10 Refer ence Manual Restricting Access Fr om Your Network 3-5 v1.0, February 2010 • If you know that the application uses either TCP or UDP , select the appropriate protocol.
Wireless-G Router WGR614v10 Refer ence Manual Restricting Access Fr om Your Network 3-6 v1.0, February 2010 b. Tim e of Day to Block . Select a start and end time in 24-hour format. Select All Day for 24-hour blocking. c. Time Zone . Select the time zone where you are located, an d if you prefer to automatically adjust for daylight savings time.
Wireless-G Router WGR614v10 Refer ence Manual Restricting Access Fr om Your Network 3-7 v1.0, February 2010 V iewing Logs of Web Access or Attempted W eb Access The log is a detailed record of the websites you have accessed or attempted to access. Up to 128 entries are stored in the log.
4-1 v1.0, February 2010 Chapter 4 Customizing Y our Network Settings This chapter describes how to configure advanced networking features of the W ireless-G Router Model WGR614v10, including LAN, W AN, and routing settings.
Wireless-G Router WGR614v10 Refer ence Manual Customizing Your Ne twork Settings 4-2 v1.0, February 2010 Configuring a Device Name The device name is a user-friendly name for the ro uter . This name is shown in the Network on W indows V ista and the Ne twork Explorer on all W indows systems.
Wireless-G Router WGR614v10 Refer ence Manual Customizing Your Ne twork Settings 4-3 v1.0, February 2010 Specify the pool of IP addresses to be assigned by setting the st arting IP address and ending IP address. These addresses should be part of the same IP addre ss subnet as the router ’ s LAN IP address.
Wireless-G Router WGR614v10 Refer ence Manual Customizing Your Ne twork Settings 4-4 v1.0, February 2010 4. Click Apply to enter the reserve d address into the table. T o edit or delete a reserved address entry: 1. Click the button next to the reserved address you want to edit or delete.
Wireless-G Router WGR614v10 Refer ence Manual Customizing Your Ne twork Settings 4-5 v1.0, February 2010 From the main menu of the browser interface, under Advanced, select Dynamic DNS to display the Dynam ic DN S sc re en . T o configure Dynamic DNS: 1.
Wireless-G Router WGR614v10 Refer ence Manual Customizing Your Ne twork Settings 4-6 v1.0, February 2010 Configuring the W AN Setup Options The W AN Setup options let you configure a DM Z (demilitarized zone) server , change the Maximum T ransmit Unit (MTU) siz e, and enable the wireless router to respond to a pi ng on the W AN (Internet) port.
Wireless-G Router WGR614v10 Refer ence Manual Customizing Your Ne twork Settings 4-7 v1.0, February 2010 them, but there are other applications that migh t not function well. In some case s, one local computer can run the application co rrectly if that computer ’ s IP ad dress is entered as the default DMZ server .
Wireless-G Router WGR614v10 Refer ence Manual Customizing Your Ne twork Settings 4-8 v1.0, February 2010 Configuring NA T Filtering Network Address T ranslation (NA T) determines ho w the router processes inbound traffic.
Wireless-G Router WGR614v10 Refer ence Manual Customizing Your Ne twork Settings 4-9 v1.0, February 2010 •T h e Gateway IP Address field specifies that all traf fic for these addresses should be forwarded to the ISDN router at 19 2.168.1.100. •A Metric value of 1 will work since the ISDN router is on the LAN.
Wireless-G Router WGR614v10 Refer ence Manual Customizing Your Network Settings 4-10 v1.0, February 2010 5. T ype the IP address of the final destination. 6. T ype the IP subnet mask for this destination. If the destination is a single host, type 255.
Wireless-G Router WGR614v10 Refer ence Manual Customizing Your Network Settings 4-11 v1.0, February 2010 In the scenario shown, the following co nditions must be met for both APs: • Both APs m ust use the same SSID , wireless channe l, and encryption m ode (see informat ion about WEP in “Configuring WEP W ireless Security” on page 2-7” ).
Wireless-G Router WGR614v10 Refer ence Manual Customizing Your Network Settings 4-12 v1.0, February 2010 If this check box is selected, th e router communicates wireless ly only with other APs whose MAC addresses are listed in this screen. The r outer still communicates with wire-conne cted LAN devices.
Wireless-G Router WGR614v10 Refer ence Manual Customizing Your Network Settings 4-13 v1.0, February 2010 Setting Up a Repeater Unit Use a wi red Ethernet co nnection to set up the repe ater unit to avoid conflicts with the wireless connection to the base station.
5-1 v1.0, February 2010 Chapter 5 Fine-T uning Y our Network This chapter describes how to modify the configuration of the W ireless-G Router Model WGR614v10 to allow specific appl ications to acces s the Internet or to be acc essed from the Internet, and how to make adjustments to enhance yo ur network’ s performance.
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-2 v1.0, February 2010 How Y o ur Computer Accesses a Re mote Computer through Y our Router When a computer on your network need.
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-3 v1.0, February 2010 4. The W eb server at www .example.com compos es a return messa ge with the requested W eb page data. The re turn message contains the following address a nd port information: • The source address is the IP address of www .
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-4 v1.0, February 2010 “When you initiate a session with destination port 6667, you must also allow incoming traffic on port 1 13 to reach the originatin g computer .
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-5 v1.0, February 2010 How Port Forwarding Changes the Communication Process In both of the preceding examples, your computer initiates an application session with a serve r computer on the Internet.
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-6 v1.0, February 2010 How Port Forwarding Diff ers from Port T riggering The following points summarize the differences between.
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-7 v1.0, February 2010 T o configure port forwarding to a local server: 1. Select Port Forwarding/Port T riggering under Advanced in the main menu. 2. From the Service Name list, select the service or game that you will host on your network.
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-8 v1.0, February 2010 2. Click Add Custom Service . 3. In the Service Name field, ente r a descriptive name. 4. In the Service T ype field, select the protocol. If you are unsure, select TCP/UDP .
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-9 v1.0, February 2010 T o make a local W eb server public: 1. Assign your W eb serve r either a fixed IP ad dr ess or a dynamic IP address using DHCP addre ss reservation, as explained in “Using Addres s Reservation” on page 4-3 .
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-10 v1.0, February 2010 T o configure port triggering, you need to know which inbound ports the applicatio n needs. Also, you need to know the number of the outbound po rt that will trigger the opening of the inbound ports.
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-11 v1.0, February 2010 4. In the Port T riggering T imeout field, enter a value up to 99 99 minutes. T his value controls the inactivity timer for the d esignated inbou nd ports.
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-12 v1.0, February 2010 Using Universal Plug and Play Universal Plug and Play (UPnP) helps devices, su ch as Internet appliances and computers, to access the network and connect to other devices as needed.
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-13 v1.0, February 2010 • Advertisement Period . The advertisement period is how often the ro uter broadcasts its UPnP information. This value can range from 1 to 1440 minutes. The default pe riod is 30 minutes.
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-14 v1.0, February 2010 • Choose placement carefully . For best results, place your router: – Near the center of the area in which your computers will operate.
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-15 v1.0, February 2010 Quality of Service Quality of Service (QoS) is an advanced feature that can be used t o prioritize some types of traf fic ahead of others. The W ireless-G Route r can provide QoS prioritization on th e Internet connection.
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-16 v1.0, February 2010 • For specific applications • For specific online games • On individual Ethernet LAN po rts of the.
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-17 v1.0, February 2010 2. Click Setup QoS Rule . The QoS Priority Rule List displays: 3. In the QOS Priority Rule L ist, select an existing item, or you can scroll to the bottom of the list and select Add Priority Rule .
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-18 v1.0, February 2010 a. If you chose to add a new entr y , the screen expands as shown: b. In the QoS Policy for field, enter a descriptive name for the new application or game.
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-19 v1.0, February 2010 3. On the QoS - Priority Rules screen, go to the Priority Category field, and select Ethernet LAN Port from the drop-down list: 4. From the LAN port list, select the LAN port that will have a QoS policy .
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-20 v1.0, February 2010 3. On the QoS - Priority Rules screen, go to the Priority Category field, and select MAC Address from the drop-down list: 4. If the device to be prioritized appears in the MAC Device List, select it.
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-21 v1.0, February 2010 3. Select the radio button next to the QoS policy to be edited or deleted, and do one of the following: • Click Delete to remove the QoS policy . • Click Edit to edit the QoS policy .
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-22 v1.0, February 2010 If you suspect an MTU problem, a common solution is to change the MTU size to 1400. If you are willing to experiment, you can gradually reduce the MTU size from the maximum value of 1500 until the problem goes away .
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-23 v1.0, February 2010 • Wir eless . Y o ur W ireless-G Router Model WGR614v10 pr ovides a wireless data throughput of up to 300 Mbps using technology called multip le input, multiple outp ut (MIMO), in which multiple antennas transmit mult iple streams of data.
Wireless-G Router WGR614v10 Refer ence Manual Fine-Tuning Your Network 5-24 v1.0, February 2010 • S treaming MP3 audio requires less than 1 Mbps per stream and does not strain most modern networks. Like video, however , streaming audio is also sensitive to late ncy and packet loss, so a congested network or a noisy lin k can cause problems.
6-1 v1.0, February 2010 Chapter 6 Using Network Monitoring T ools This chapter describes how to use the maintenance features of your W ireless-G Router Model WGR614v10. Y ou can access these features by selec ting the items under Maintenance in the main menu of the browser interface.
Wireless-G Router WGR614v10 Refer ence Manual Using Network Monitoring Tools 6-2 v1.0, February 2010 Ta b l e 6 - 1 des cribes the router status fields. Figure 6-1 T able 6-1. Wireless Router S t atus Fields Field Description Account Name The host name assigned to the router .
Wireless-G Router WGR614v10 Refer ence Manual Using Network Monitoring Tools 6-3 v1.0, February 2010 LAN Port These settings apply to the Ethernet (LAN) port of the router . MAC Address The Media Access Control address. This is the unique physi cal address being used by the LAN port of the router .
Wireless-G Router WGR614v10 Refer ence Manual Using Network Monitoring Tools 6-4 v1.0, February 2010 2. Click Connection S tatus to display the connectio n status. Ta b l e 6 - 2 describes the connection status settings. Click the Release button to release the connection status items (that is, all items return to 0).
Wireless-G Router WGR614v10 Refer ence Manual Using Network Monitoring Tools 6-5 v1.0, February 2010 3. Click Show S tatistics to display router usa ge statistics. Ta b l e 6 - 3 describes the router statistics. T o change the polling frequency , enter a time in seconds in the Poll In terval field, and click Set Interval .
Wireless-G Router WGR614v10 Refer ence Manual Using Network Monitoring Tools 6-6 v1.0, February 2010 V iewing a List of Att ached Devices The Attached Devices screen contains a table of all IP devic es that the router has discovered on the local network.
Wireless-G Router WGR614v10 Refer ence Manual Using Network Monitoring Tools 6-7 v1.0, February 2010 The following sections describ e the three available options.
Wireless-G Router WGR614v10 Refer ence Manual Using Network Monitoring Tools 6-8 v1.0, February 2010 Upgrading the Router Sof tware The routing software (also called firmware) of the W ireless-G Rout er is stored in flash memory , and can be upgraded as NETGEAR release s new soft ware.
Wireless-G Router WGR614v10 Refer ence Manual Using Network Monitoring Tools 6-9 v1.0, February 2010 A screen is also provided for u pgrading the router . From the main menu of the browser interface, under Maintenance, select Router Upgrade to display the Router Upgrade screen.
Wireless-G Router WGR614v10 Refer ence Manual Using Network Monitoring Tools 6-10 v1.0, February 2010 If the router discovers a newer vers ion of software, the message on the left displays when you log in. If no new software is available, the message on the right displays.
Wireless-G Router WGR614v10 Refer ence Manual Using Network Monitoring Tools 6-11 v1.0, February 2010 6. Click Browse , and locate the firmware imag e that you downloaded to your PC (the file ends in .img or .chk). 7. Click Uploa d to send the firmware to the router .
Wireless-G Router WGR614v10 Refer ence Manual Using Network Monitoring Tools 6-12 v1.0, February 2010 T o configure your router for remote management : 1. Select the T urn Remote Management On ch eck box. 2. Under Allow Remote Access By , sp ecify what external IP addr esses will be allowed to access the router’ s remote management.
Wireless-G Router WGR614v10 Refer ence Manual Using Network Monitoring Tools 6-13 v1.0, February 2010 T raffic Meter T raf fic Metering allows you to mo nitor the volume of Internet traf fic passing through your route r ’ s Internet port.
Wireless-G Router WGR614v10 Refer ence Manual Using Network Monitoring Tools 6-14 v1.0, February 2010 2. T o enable the T raffic Meter , click the Enable T raffic Meter check box. 3. If you would like to record an d restrict the volume of Internet traf fic, click the T raffic volume control by radio button.
7-1 v1.0, February 2010 Chapter 7 T roubleshooting This chapter provides information about trou bleshootin g your W ireless-G Router Model WGR614v10. After each prob lem description, instru ctions are provided to help you diagnose and solve the problem.
Wireless-G Router WGR614v10 Refer ence Manual Troubleshooting 7- 2 v1.0, February 2010 4. T urn on the wireless router and wait 1 minute. 5. T u rn on the computers.
Wireless-G Router WGR614v10 Refer ence Manual Troubleshooting 7- 3 v1.0, February 2010 T roubleshooting Basic Functions After you turn on po wer to the router , the following sequ ence of events should occur: 1. When power is first applied, veri fy that the Power light is on.
Wireless-G Router WGR614v10 Refer ence Manual Troubleshooting 7- 4 v1.0, February 2010 If the error persists, you might h av e a hardware problem and sh ould contact T ech nical Support at www .netgear .com/support . The Internet or Ethernet port light s are not on.
Wireless-G Router WGR614v10 Refer ence Manual Troubleshooting 7- 5 v1.0, February 2010 • Make sure that your browser has Java, JavaS cript, or ActiveX enabled. If you are using Internet Explorer , click Refresh to be sure that the Java applet is loaded.
Wireless-G Router WGR614v10 Refer ence Manual Troubleshooting 7- 6 v1.0, February 2010 • If your ISP requires a login , the login name or password migh t be set incorrectly . • Y our ISP might chec k for your computer ’ s host name. Assign the computer host name of your ISP account as the account name in the Basic Settings screen.
Wireless-G Router WGR614v10 Refer ence Manual Troubleshooting 7- 7 v1.0, February 2010 T roubleshooting a Network Using the Ping Utility Most network devices and routers contain a ping utility that sends an echo request packet to the designated device .
Wireless-G Router WGR614v10 Refer ence Manual Troubleshooting 7- 8 v1.0, February 2010 – V erify that the IP address for your router and your computer are correct and that the addresses are on the same subnet.
Wireless-G Router WGR614v10 Refer ence Manual Troubleshooting 7- 9 v1.0, February 2010 Problems with Date and T i me Under Content Filtering in the main menu, select E-mail to display a screen that shows the current date and time of day .
Wireless-G Router WGR614v10 Refer ence Manual Troubleshooting 7-10 v1.0, February 2010 Use the setup program to scan for available wireless networks. Look for a network name (SSID) of NETGEAR or your custom SSID if you have chang ed it.
Wireless-G Router WGR614v10 Refer ence Manual Troubleshooting 7-11 v1.0, February 2010 1. Select Wir eless Se ttings under Setup in the main menu of the WGR614v10 router . 2. For the wireless network name (SSID), use the default name, or choose a suitable descriptive name.
Wireless-G Router WGR614v10 Refer ence Manual Troubleshooting 7-12 v1.0, February 2010 6. For Security Options, select None . 7. Click Apply to save your changes. 8. Select Wir eless Se ttings under Advanced in the main menu of the WGR614v10 router . 9.
Wireless-G Router WGR614v10 Refer ence Manual Troubleshooting 7-13 v1.0, February 2010 Restoring the Default Co nfiguration and Password This section explains how to restore the fact ory default configuratio n settings, changing the router ’ s administration password back to password .
Wireless-G Router WGR614v10 Refer ence Manual Technical Specifications A-1 v1.0, February 2010 Appendix A T echnical S pecifications This appendix provides technical specificatio ns for the W ireless-G Router Model WGR614v10.
Wireless-G Router WGR614v10 Refer ence Manual Technical Specifications A-2 v1.0, February 2010 Wireless Radio data rates 1, 2, 5.5, 6, 9, 12, 18, 24, 36, 48, and 54 Mbps Auto Rate Sensing Frequency 2.4-2.5Ghz Data encoding 802.1 1b: Direct S equence S pread S pectrum (DSSS) 802.
Related Documents B-1 v1.0, February 2010 Appendix B Related Document s This appendix provides links to reference documents yo u can use to gain a more com plete understanding of the techno logies used in your NETGEAR p roduct. In addition, you can find initial setup i nstructions for your wireless router i n the .
Index-1 v1.0, February 2010 Index A access blocking 3-1 remote 6-1 1 restricting by MAC address 2-1 1 viewing logs 3-7 access control turning of f 1-13 , 7-12 turning on 2-13 access points 4-10 access.
Wireless-G Router WGR614v10 Refer ence Manual Index-2 v1.0, February 2010 user -defined services 3-4 WP A security 2-9 See also adding connection mode 1-10 connection status settings 6-4 connection ty.
Wireless-G Router WGR614v10 Refer ence Manual Index-3 v1.0, February 2010 I idle time-out 1-1 1 inbound traffic, allowing or blocking 5-1 interface specific at ions A-1 interference, reducing 5-14 Int.
Wireless-G Router WGR614v10 Refer ence Manual Index-4 v1.0, February 2010 P passphrases 2-8 , 2-9 , 2-10 password changing 2-15 restoring 7-13 path, testing 7-8 performance, op timizing 5-13 physical .
Wireless-G Router WGR614v10 Refer ence Manual Index-5 v1.0, February 2010 speed requirements 5-23 SPI (State ful Pa cket Inspection) firewall 4-6 spoofing MAC addresses 1-8 SSID 1-12 , 2-7 , 6-3 , 7-1.
Wireless-G Router WGR614v10 Refer ence Manual Index-6 v1.0, February 2010 wireless settings advanced 2-10 basic 2-6 gathering informatio n 2-4 testing 7-10 wireless specifications A-2 WMM (W i-Fi Mult.
Ein wichtiger Punkt beim Kauf des Geräts NETGEAR WIRELESS-G ROUTER WGR614V10 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NETGEAR WIRELESS-G ROUTER WGR614V10 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NETGEAR WIRELESS-G ROUTER WGR614V10 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NETGEAR WIRELESS-G ROUTER WGR614V10 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NETGEAR WIRELESS-G ROUTER WGR614V10 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NETGEAR WIRELESS-G ROUTER WGR614V10 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NETGEAR WIRELESS-G ROUTER WGR614V10 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NETGEAR WIRELESS-G ROUTER WGR614V10. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NETGEAR WIRELESS-G ROUTER WGR614V10 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
