Benutzeranleitung / Produktwartung GS108T-200NAS des Produzenten NETGEAR
Zur Seite of 34
202-10562-01 January 2010 v1.0 NETGEAR , Inc. 350 East Plumeria Drive San Jose, California 95134 USA GS108T Hardware Installation Guide.
ii v1.0, January 2010 © 2010 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR, the NETGEAR logo, and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation.
Contents iii v1.0, January 2010 Contents GS108T Hardware Installation Guide About This Manual Conventions, Formats and Scope ..................................................................................... v How to Print this Manual .............
iv Contents v1.0, January 2010 Chapter 4 Installation Step 1: Preparing the Site .............................................................................................. 4-1 Step 2: Installing the Switch .........................................
v v1.0, January 2010 About This Manual The NETGEAR ® ProSafe TM GS108T Hardware Installation Guide describes how to install and power on the GS108T Smart Switch. The information in this manual is intended for readers with intermediate computer and Internet skills.
Danger: This is a safety warning. Failure to take heed of this notice may result in personal injury or death. GS108T Hardware Installation Guide vi About This Manual v1.
GS108T Hardware Installation Guide About This Manual vii v1.0, January 2010 Revision History Part Number Version Number Date Description 202-10248-01 1.
GS108T Hardware Installation Guide viii About This Manual v1.0, January 2010.
1-1 v1.0, January 2010 Chapter 1 Introduction Congratulations on the purchase of your GS108T Gigabit Smart Switch. The GS108T Smart Switch is a state-of-the-art, high-performance, IEEE-compliant netwo.
GS108T Hardware Installation Guide 1-2 Introduction v1.0, January 2010 The GS108T Smart Switch is a free-standing switch. It is IEEE-compliant and offers low latency for high-speed networking. All ports can automatically negotiate to the highest speed.
GS108T Hardware Installation Guide Introduction 1-3 v1.0, January 2010 Green Features The GS108T Smart Switch supports the following power-saving features: • The power consumption automatically adjusts based on the RJ-45 cable length. • Each port is configured to automatically power down when the port link is down.
GS108T Hardware Installation Guide 1-4 Introduction v1.0, January 2010 • Installation guide • Smart Switch Resource CD with Smart Control Center utility and User’s manual If any item is missing or damaged, contact the place of purchase immediately.
2-1 v1.0, January 2010 Chapter 2 Physical Description This chapter describes the GS108T Gigabit Smart Switch hardware features. Topics include: • GS108T Front and Back Panel Configuration • LED De.
GS108T Hardware Installation Guide 2-2 Physical Description v1.0, January 2010 Figure 2-2 illustrates the NETGEAR GS108T Smart Switch back panel: Power Connector Figure 2-2 The back panel contains a DC input for the supplied 12V/1A external power adapter.
GS108T Hardware Installation Guide Physical Description 2-3 v1.0, January 2010 System LEDs The following table describes the system LED designations. Table 2-2. System LEDs LED Designation Power/Status LED • Solid Green - Power is supplied to the switch and is operating normally.
GS108T Hardware Installation Guide 2-4 Physical Description v1.0, January 2010 Reset Button The Smart Switch has a Reset button on the front panel to allow you to manually reboot the switch. This action is equivalent to powering the unit off and back on.
3-1 v1.0, January 2010 Chapter 3 Applications Your GS108T Gigabit Smart Switch is designed to provide flexibility in configuring your network connections. It can be used as a stand-alone device or with 10 Mbps, 100 Mbps, and 1000 Mbps hubs and switches.
GS108T Hardware Installation Guide 3-2 Applications v1.0, January 2010.
4-1 v1.0, January 2010 Chapter 4 Installation This chapter describes the installation procedures for your GS108T Gigabit Smart Switch. Switch installation involves the following steps: Step 1: Prepari.
GS108T Hardware Installation Guide 4-2 Installation v1.0, January 2010 Step 2: Installing the Switch The GS108T Smart Switch can be used on a flat surface or mounted on the wall. Installing the Switch on a Flat Surface The switch ships with four self-adhesive rubber footpads.
GS108T Hardware Installation Guide Installation 4-3 v1.0, January 2010 Step 3: Checking the Installation Before applying power to the switch, perform the following: • Inspect the equipment thoroughly. • Verify that all cables are installed correctly.
GS108T Hardware Installation Guide 4-4 Installation v1.0, January 2010 Step 5: Applying Power The GS108T Smart Switch does not have an ON/OFF switch. You can apply or remove power by: • Connecting or disconnecting the power adapter to or from an AC power source • Connecting or disconnecting Port 1 to or from a PoE power source.
GS108T Hardware Installation Guide Installation 4-5 v1.0, January 2010 Step 6: Managing the Switch using a Web Browser or the PC Utility The GS108T Smart Switch contains software for viewing, changing, and monitoring the way it works. This management software is not required for the switch to work.
GS108T Hardware Installation Guide 4-6 Installation v1.0, January 2010.
Troubleshooting A-1 v1.0, January 2010 Appendix A Troubleshooting This chapter provides information about troubleshooting the NETGEAR Smart Switch. Topics include the following: • Troubleshooting Chart • Additional Troubleshooting Suggestions Troubleshooting Chart The following table lists symptoms, causes, and solutions of possible problems.
GS108T Hardware Installation Guide A-2 Troubleshooting v1.0, January 2010 Additional Troubleshooting Suggestions If the suggestions in Troubleshooting Chart do not resolve the problem, refer to the troubleshooting suggestions in this section.
GS108T Hardware Installation Guide Troubleshooting A-3 v1.0, January 2010 Auto-Negotiation The RJ-45 ports negotiate the correct duplex mode and speed if the device at the other end of the link supports auto negotiation.
GS108T Hardware Installation Guide A-4 Troubleshooting v1.0, January 2010.
Technical Specifications B-1 v1.0, January 2010 Appendix B Technical Specifications Network Protocol and Standards Compatibility IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3x flow control IEEE 802.3af Management Windows 2000 + XP, Vista; Microsoft Explorer 6.
GS108T Hardware Installation Guide B-2 Technical Specifications v1.0, January 2010 Interface Eight RJ-45 connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto Uplink™ on all ports).
GS108T Hardware Installation Guide Technical Specifications B-3 v1.0, January 2010 Electromagnetic Emissions FCC Class B CE mark, commercial CE Class B, include EN55022 (CISPR 22) / 55024 / 50082-1 VC.
GS108T Hardware Installation Guide B-4 Technical Specifications v1.0, January 2010.
Index-1 v1.0, January 2010 Index Numerics 1000BASE-T 1-2 100BASE-TX 1-2 10BASE-T 1-2 8-pin 2-3 A Applying AC Power 4-4 Auto Sensing 1-2 Auto Uplink 2-3 Auto-negotiating 1-2 Auto-sensing 2-3 B Back-pre.
GS108T Hardware Installation Guide Index-2 v1.0, January 2010 M MAC 1-2 Media Access Control 1-2 O ON/OFF switch 4-4 Operating Conditions 4-2 Operating Environment 4-1 Operating humidity 4-2 Overview .
Ein wichtiger Punkt beim Kauf des Geräts NETGEAR GS108T-200NAS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NETGEAR GS108T-200NAS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NETGEAR GS108T-200NAS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NETGEAR GS108T-200NAS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NETGEAR GS108T-200NAS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NETGEAR GS108T-200NAS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NETGEAR GS108T-200NAS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NETGEAR GS108T-200NAS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NETGEAR GS108T-200NAS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
