Benutzeranleitung / Produktwartung M5711 des Produzenten Aspire Digital
Zur Seite of 73
Aspire M371 0 Aspire M5711 Aspire M7711 Service Guide Service guide files and updates are available on the AIPG/CSD web; for more information please refer to http://csd.
II Revision History Please refer to the table below for the updates made on Aspire M3710/Aspire M5711/ Aspire M7711 service guide. Date Chapter Updates.
III Copyright Copyright © 2008 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any.
IV Conventions The following conventions are used in this manual: SCREEN MESSAGES Denotes actual messages that appear on screen. NOTE Gives bits and pieces of additional information related to the current topic. WARNING Alerts you to any damage that might result from doing or not doing specific actions.
V Preface Before using this information and the product it supports, please read the following general information. 1. This Service Guide provides you with all technical information relating to the BASIC CONFIGURATION decided for Acer's "global" product offering.
Cha p ter 1 S y stem S p ecifications 1 Features………………………………………………………………… …………………………... 1 Main board Placemen t…………………………………………………….……..…………….
1 System Specifications Features Operating System Microsoft Windows Vista (Home Basic, Home Premium, Business) Processor Socket Type: Intel® Socket T LGA 775 pin Processor Type: Intel.
2 PCI Slot Quantity: 2 FDD Slot Quantity: 1 Design Criteria: Should support 1.44MB/3 mode 3.5” Devices SATA Slot Type: SATA slot Slot Quantity: 6 Storage Type support: HDD/CD-ROM/CD-RW/DVD-ROM/DVD-RW/DVD+RW/DVD Dual/DVD SuperMultiPlus/Blu-Ray ODD Audio Audio Type: HD audio codec Audio Channel: 7.
3 PHY: Realtek 8211CL Gigabit Ethernet Phy. USB Controller Type: (NV MCP7A) Ports Quantity: 10 4 back panel ports On-board: 3 2*5 headers 4 ports for front daughter board 4 ports for rear I/O 2 ports for internal card reader.
4 Rear I/O Connector 1 PS/2 Keyboard port, 1 PS/2 Mouse port, 1 COM port 1 HDMI port (Aspire M3710 series only), 1 D-Sub port, (Aspire M3710 series only) 1 RJ45 LAN port, 1 IEEE 1394 port (6 pin) (Aspire sku only) 4 USB ports 7.
5 1 2*7 pin front panel IO header 1 Jumper for clear CMOS 1 on board buzzer Color management for on board connecter (pls provide proposal) 1 2*10 pin TPM module connector(Reserved).
6 PFC version will not provide switch selector for 115/230V AC input but it should be universal for Europe and China Non-PFC version should provide switch selector for 115/230V AC input and un.
7 Main board Placement.
8 Block Diagram 1.
8 Block Diagram 2.
9 Aspire M3710 Front Panel The computer’s front panel consists of the following: Label Description 1 USB ports 2 Optical drive 3 Card reader 4 FDD Cover 5 Speaker/Microphone jack 6 Power button 7 Po.
10 Aspire M3710 Rear Panel Label Description Label Description 1 Power card socket 8 Fan aperture 2 Voltage selector switch 9 PS/2 mouse connector 3 PS/2 keyboard connector 10 System Fan 4 HDMI connector 11 Monitor connector 5 Com port 12 1394 connector 6 USB 2.
11 Aspire M5711 Front Panel Label Description 1 USB ports 2 Floppy disk drive Acer Logo 3 Optical drive 4 Card reader 5 Power button 6 LED module 7 Speaker/ Microphone jack.
12 Aspire M5711 Rear Panel Label Description Label Description 1 Power card socket 8 System Fan 2 Voltage selector switch 9 1394 connector 3 PS/2 keyboard connector 10 LAN connector 4 USB connector 11.
13 Aspire M7711 Front Panel Label Description 1 Media Control Interface 2 Optical drive 3 Acer Logo 4 Power button.
14 Aspire M7711 Rear Panel Label Description Label Description 1 Power card socket 6 PS/2 mouse connector 2 PS/2 keyboard connector 7 System Fan 3 USB 2.
15 Hardware Specifications and Configurations Processor Item Specification Type Intel Pentium Dual Core / Core 2 Duo / Core2 Quad (up to 95W CPUs FSB 1066/1333 MHz CPUs) Socket LGA 775 pin FSB 1066/1333 MHz CPUs Minimum operating speed 0 MHz (If Stop CPU Clock in Sleep State in BIOS Setup is set to Enabled.
16 Main Board Major Chips Item Specification North Bridge NV MCP73PV/S & NV MCP73VE South Bridge NV MCP73PV/S & NV MCP73VE APG controller NV MCP73PV/S & NV MCP73VE Super I/O controller ITE 8718FX Audio controller Realtek HD audio codec ALC888S HD codec 7.
17 Audio Interface Item Specification Audio controller NV MCP7A-O/ MCP7A-D Audio controller type ALC888S Audio channel codec 7.1 Audio function control Enable/disable by BIOS Setup Mono or stereo Ster.
18 Floppy disk drive Interface Item Specification Floppy disk drive controller ITE 8718F/JX Floppy disk drive controller resident bus ISA bus Support FDD format 360KB, 720KB, 1.
19 Environmental Requirements Item Specification Temperature Operating +5°C ~ +35°C Non-operating -20 ~ +60°C (Storage package) Humidity Operating 15% to 80% RH Non-operating 10% to 90% RH Vibration Operating (u npacked) 5 ~ 500 Hz: 2.20g RMS random, 10 minutes per axis in all 3 axes 5 ~500 Hz: 1.
20.
21 System Utilities The manufacturer or the dealer already configures most systems. There is no need to run Setup when starting the computer unless you get a Run Setup message. The Setup program loads configuration values into the battery-backed nonvolatile memory called CMOS RAM.
22 Entering Setup Power on the computer and the system wi ll start POST (Power On Self Test) process. When the message of “Press DEL to enter SETUP” appears on the screen, press the key of [Delete] to enter the setup menu.
23 The items in the main menu are explained below: Parameter Description Production Information This page shows the relevant information of the main board Standard CMOS Features This setup page includ.
24 Product Information The screen below appears if you select Product Information from the main menu: The Product Information menu contains general data about the system, such as the product name, serial number, BIOS version, etc. This information is necessary for troubleshooting (maybe required when asking for technical support).
25 Standard CMOS Setup Select standard CMOS features from th e main menu to configure some basic parameters in your system the following screen shows the standard CMOS features menu: The following table describes the parameters found in this menu.
26 Advanced Setup The following screen shows the Advanced Setup: The following table describes the parameters found in this menu. Parameter Description Options Quick Boot Allows BIOS to skip certain tests while booting.
27 Advanced Chipset Setup The following table describes the parameters found in this menu. Parameter Description Options Intel EIST For Intel platform Disabled/Enabled Intel(R) VT For Intel platform I.
28 Integrated Peripherals The following table describes the parameters found in this menu..
29 Parameter Description Options Onboard SATA Mode This item is only available when onboard SATA controller is enabled Native IDE/RAID/AHCI Onboard USB Controller Always enabled USB keyboard during PO.
30 Power Management The Power Management menu lets you configure your system to most effectively save energy while operating in a manner consistent with your own style of computer use. The following screen shows the Power Management parameters and their default settings: The following table describes the parameters found in this menu.
31 PC Health Status The following table describes the parameters found in this menu: Parameter Description Options Vcore Detect system’s voltage status automatically CPU Temperature Detect CPU Tempe.
32 Frequency/Voltage Control The following table describes the parameters found in this menu: Parameter Description Options CPU Sprea d Spectrum Always auto detect Spread Spectrum Disabled/Enabled.
33 BIOS Security Features The following table describes the parameters found in this menu: Parameter Descripti on Options Change Supervisor Password This item is only available when supervisor password is installed, If clear supervisor password, user password should also be cleared.
34 Load Default Settings This option opens a dialog box that lets you install defaults for all appropriate items in the Setup Utility. The following table describes the parameters found in this menu: .
35 Save & Exit Setup Highlight this item and press <Enter> to save the changes that you have made in the Setup Utility and exit the Setup Utility.
36 Exit Without Saving Highlight this item and press <Enter> to discard any changes that you have made in the Setup Utility and exit the Setup Utility.
37 Machine Disassembly and Replacement To disassemble the computer, you need the following tools: Wrist grounding strap and conductive mat for preventing electrostatic discharge. Wire cutter. Phillips screwdriver (may require different size). NOTE: The screws for the different components vary in size.
38 General Information Before You Begin Before proceeding with the disassembly procedure, make sure that you do the following: 1. Turn off the power to the system and all peripherals.
39 Disassembly Procedure This section tells you how to disassemble the system when yo u need to perform system service. Please also refer to the disassembly video, if available. CAUTION: Before you proceed, make sure you have turned off the system and all peripherals connected to it.
40 Aspire M3710/5711/7711 Standard Disassemb ly Process Bezel Label Process: 1. According to the requirement, paste ATI, OS, CPU, HDMI and marketing label by SKU.
41 A spire M1640.
42 Remove side cover Process: 1. Put the Computer on the worktable lightly. 2. Release left side cover with 2 screws then remove left side cover. Remove CPU fan pipe Process: 1.
43 Remove Cards Process: 1. Release the slot cover tooless 2. Remove VGA ､ TV ､ Modem Card ， the following list is for your reference about the mutual location relation (Optional by SKU). Notice: I. Remove card, don’t touch any electric parts on PCB.
44 Remove HDD Data Cables Process: 1. Remove master HDD from M/B SATA1. 2. Remove slave ODD data cable from M/B SATA3. SA T A1 slot on M/B A T A3 slot on M/B Remove slave HDD Remove master HDD.
45 Remove ODD DATA cable Process: 1. Remove master ODD data cable from Master ODD. 2. Remove slave ODD data cable from master and Slave ODD (Optional by SKU) Remove HDD power cable Process: 1. Remove master HDD data cable from master HDD. 2. Remove slave HDD data cable from slave HDD.
46 Remove Cables Process: 1. Remove front audio cable from M/B “JAUD2” 2. Remove SPDIF cable from M/B” JSPDIF02” 3. Remove front USB cable from USB2 and USB3. 4. Remove card reader USB cable from USB1. 5. Release cable clip (no modem and audio cable is longer).
47 Remove HDD Process: 1. Remove Master HDD from the first HDD location. 2. Remove Slave HDD from the second HDD location. (Optional by SKU) Master HDD Slave HDD.
48 Remove ODD power cable Process: 1. Remove ODD power cable from master ODD (for SATA ODD). 2. Remove ODD power cable from slave ODD (for SATA ODD). Remove card reader Process: 1.
49 Remove FDD Cable Process: 1. Remove FDD digital cable just as pictures (Optional by SKU). 2. Plug 4 pins power cord from FDD slot. 3. Remove front bezel light cable from PATA power cable Remove fro.
50 Remove ODD Process: 1. Push the lock handle release ODD. 2. Remove Master ODD from the location. 3. Remove slave ODD from the location. (Optional by SKU) Master ODD location Slave ODD location.
51 Remove Cables Process: 1. Remove M/B power cable from M/B “ATX1”. 2. Remove 12 V power cable from M/B” JPW1” 3. Remove panel power cable from” F-PANEL1”.
52 Remove System FAN Process: 1. Release four screws according to the following picture. 2. Remove Sys FAN (Optional by SKU) Release four screws. 4 3 1 2 The direction of System F AN.
53 Remove mother board Process: 1. Release 8 pcs screws form the corresponding hole. 2. Release screws according to the following picture in turn. 3. Remove the Mother board from chassis.
54 Remove CPU cooler Process: 1. Remove cooler power cable from M/B “CPU-F2”. 2. Release screw 1 first, then fixes scre w 2, screw 3 & screw 4 (A s Picture). 3. Remove Cooler from the Retention module. Remove memory Process: 1. Remove the first Memory from DIMM0 2.
55 Remove CPU Process: 1. Remove CPU according following the pictures. Remove I/O shielding Process: 1. Remove I/O Shielding. Lock the Handle.
56 Troubleshooting Please refer to generic troubleshooting guide for troubleshooting information relating to following topics: Power-On Self-Test (POST) POST Check Points POST Error Messag.
57 Chapter 5.
58.
59 ATX_POWER: ATX 24-pin Power Connector 9 8 7 6 5 4 3 2 1 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 Pin Signal Name Pin Signal Name 1 +3.3 13 +3.3V 2 +3.3 14 -12V 3 COM 15 COM 4 +5V 16 PS_ON 5 COM 17 COM 6 +5V 18 COM 7 COM 19 COM 8 PWR OK 20 -5V 9 5VSB 21 +5V 10 +12V 22 +5V 11 +12V 23 +5V 12 +3.
60.
61.
62.
58 FRU (Field Replaceable Unit) List This chapter gives you the FRU (Field Replacea ble Unit) listing in global configurations of Aspire M3710/5711/7711 . Refer to this chapter whenever ordering for parts to repair or for RMA (Return Merchandise Authorization).
59 Exploded Diagram NO DESCRIPTION NO DESCRIPTION 1 AM320_MAIN_BEZEL 10 POWER SUPPL Y 2 AM320_USB 11 FAN 3 AM320_USB_PANEL 12 PCI-BRACKET 4 FDD_LOCK_SLIDE 13 LEFT SIDE DOOR 5 CD_RO M LOCK SLIDE 14 HOTHER BOARD 6 CHASSIS 15 HDD 7 USB_PCB_ASN 16 3.
60 NO DESCRIPTION NO DESCRIPTION 1 AM520-MAIN-BEZEL 11 FAN 2 3-25-COVER 12 PCI-BRACKET 3 5-25-COVER 13 LEFT SIDE DOOR 4 AM520-USB 14 NOTHERBOARD 5 AM520-USB-PENEL 15 HDD 6 CHASSIS 16 3.
61 NO DESCRIPTION NO DESCRIPTION 1 TOP PLASTIC 14 FIO-RACK 2 1-TOP-PLATE 15 FRONT-AXES 3 SCREW 16 STANDOFF-A 4 CARD READ ASSY 17 BASE BEZEL FOR ACER 5 MCI ASSY 18 RUBBER-FOOT(FRONT) 6 GEAR-BKT 19 SCRE.
Ein wichtiger Punkt beim Kauf des Geräts Aspire Digital M5711 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Aspire Digital M5711 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Aspire Digital M5711 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Aspire Digital M5711 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Aspire Digital M5711 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Aspire Digital M5711 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Aspire Digital M5711 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Aspire Digital M5711. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Aspire Digital M5711 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
