Benutzeranleitung / Produktwartung XV29 Plus des Produzenten NEC
Zur Seite of 33
Multimedia Monitor User's Manual MultiSync © XV2 9 Plus MultiSync © XV 2 9 Plus MultiSync © NEC Technologies, Inc. 1250 N. Arlington Heights Road, Suite 500 Itasca, Illinois 60143-1248 Printed in Thailand 78408751 MultiSync is a registered trademark of NEC Technologies, Inc.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock.
MISE EN GARDE: AFIN DE REDUIRE LES RISQUES D’ELECTRO- CUTION, NE PAS DEPOSER LE COUVERCLE, IL N’Y A AUCUNE PIECE UTILISABLE A L’INTERIEUR DE CET APPAREIL.
unauthorized product modification, or failure to follow instructions supplied with the product. • Repair or attempted repair by anyone not authorized by NECTECH. • Any shipment of the product (claims must be presented to the carrier). • Removal or installation of the product.
1. Introduction Introduction to the MultiSync XV29 Plus ................................................................................. 1 Feature Highlights ............................................................................................
1 OSM and IPM are trademarks of NEC Technologies, Inc. IBM PC/AT, PS/2, VGA, S-VGA, 8514/A and XGA are registered trademarks of International Business Machines Corporation. Apple and Macintosh are registered trademarks of Apple Computer, Inc. Microsoft is a registered trademark of Microsoft Corporation.
Rear View Front View 3 Part Names and Functions 1 POWER Press to turn the main power on and off when the AC power is supplied. 2 POWER/STANDBY When this indicator is green, the monitor is on; when the indicator is amber, it is in standing by. 3 Remote Sensor Window Receives infrared signal from the handheld remote control.
12 AC Input Connect the supplied power cord' s three-pin plug here. 13 VIDEO 1 VIDEO 1 IN (RCA type) ........ Connect a VCR or laser disk player here to display the video. S-VIDEO 1 IN ........................ Here is where you connect S-Video input from an external source like a VCR.
Remote Control Unit NOTE: When not in use the remote control unit is conveniently stowed in the holder on the rear panel. 1 POWER ON/OFF Press POWER ON to turn the monitor on when the POWER/STANDBY indicator is lit red. Press POWER OFF to turn the monitor off and the monitor will go into the standby condition.
Raster Control 7 WIDTH (+ / –) Adjusts the horizontal size of the image. 8 HEIGHT (+ / –) Adjusts the vertical size of the image. 9 SIDE PIN (+ / –) Adjusts the curvature of the edges of the left and right side of the display image either inward or outward.
Battery Installation and Replacement The remote control is powered by two 1.5V AA batteries. 3. Close the battery compartment cover. 1. Turn the remote control unit upside down. Press down on the battery compartment grip and slide the compartment in the direction of the arrow.
Mode On Standby Standby Suspend Off Power Off Pin No. 4 (Intelligent Power Manager) This function saves power. When Intelligent Power Manager (IPM™) control is on, by using the monitor’ s horizontal and vertical SYNC signals, the monitor can be prompted into the different IPM modes.
Installation Wiring Diagram POWER POWER /STANDBY SOURCE SELECT VOLUME RGB2 VIDEO2 S L (MONO) R AUDIO PROCEED EXIT RGB2 VIDEO2 S L (MONO) R AUDIO IBM XGA/SuperVGA/VGA or Compatibles VCR or Las.
Connecting Your PC or Macintosh Computer Connecting your PC or Macintosh computer to your MultiSync XV29 Plus will enable you to display your computer's screen image.
Pin No. 1 2 3 12 13 14 15 4 5 6 7 8 11 10 9 D-Sub 15 Pin RGB Signal Composition Pin Assignments and Signal Levels for 15 pin RGB Signal to be connected (D-SUB 15 pin) RED GREEN or Sync Green BLUE No Connection H.
Operation Power This section describes how to select a computer or video source and how to adjust the picture and sound. General Controls Before you turn on your MultiSync XV29 Plus monitor ensure that the computer or video source is turned on. To adjust: 1.
c. HEIGHT Press to adjust the vertical size of the image. d. SIDE PIN Press to adjust the curvature of the edges of the left and right side of the display image either inward or outward. The image should be adjusted to attain a straight line on the left and right sides.
POWER POWER /STANDBY SOURCE SELECT VOLUME O NO) R U DIO PROCEED EXIT i. NORMAL( visual) Press to reset all the stored adjustment visual data and recall the factory preset data. When a specific control is selected, this key resets the selected visual adjustments.
V-position/V-height/V-linearity Controls Group The V-position/V-height/V-linearity Controls allow you to adjust the vertical position, vertical size and vertical linearity of the image. V-POSITION : Pressing + or - moves the image vertically up or down.
RGB Controls Group The RGB Controls allow you to adjust the white balance for RGB input. Pressing the PROCEED key proceeds to the RGB gain and bias adjustment. This adjustment allows you to adjust the white balance. R, B-GAIN : Pressing + or - increases or decreases the gain level for each color.
Volume Control The Volume control allows you to adjust the volume. VOLUME : Pressing + or - increases or decreases the volume. NOTE: When you mutes the sound, the MUTE display appears. Reset Control The Reset control allows you to return image parameters to factory presets.
OSM windows have the following elements: Right-oriented delta symbol : indicates further choices are available. Use the up or down keys to highlight the item. Pressing + proceeds to the selected control screen. Left-oriented delta symbol : indicates that you can exit the current control.
OSM ON/OFF This control allows you to enable the OSM control. The OSM control is available when ON is selected. When the OSM does not appear, the visual and raster controls are available with the remote control.
Troubleshooting Before arranging for service by the NEC Service Center, check the following to be sure repairs are needed. Problem No Picture or Sound Sound OK; poor picture with VIDEO signal input. Sound OK; poor picture with RGB signal input. Picture OK; poor or no sound.
Specifications Picture tube 27 inch Visual size; 29 inch CRT size (Diagonal), Type M68LLR696X02 108 degree deflection Stripe trio pitch Ph 0.74 mm at center, Ph 0.
Maximum Resolution RGB 800(H) 2 600(V) pixels VIDEO Horizontal: 600 lines /S-VIDEO Horizontal : 600 lines Video Bandwidth RGB: 30 MHz at-3dB VIDEO: 5 MHz at-3dB Display Area RGB : 95% Scan (Typically) VIDEO: 7% Overscan Retrace Time Horizontal: 15.75kHz; 10 µ sec, 31kHz<fH<66kHz; 3.
Dimensions 25.7 (652) 19.5 (495) 22.5 (572) 6 43 44 unit=inch (mm) 0.24 (6).
Input Signal Reference Chart Separate Sync. Timing Charts VIDEO A B CD E O P QR S VIDEO Sync. Polarity: Positive / Negative HORIZONTAL VERTICAL Composite Sync.
Composite Sync. & Video (Sync. on Green) Recommended Sync Signal Timing Horizontal Duty should be 3 to 30%. Horizontal sync width should exceed 0.9 µ sec. Horizontal back porch should exceed 2.0 µ sec at sync on green and 1.2 µ sec at others except when at 15KHz.
Typical Input Signal Timing Resolution Horizontal Frequency (A) Horizontal Period (B) Horizontal Pulse Width (C) Horizontal Back Porch (D) Horizontal Active Area (E) Hrizontal Front Porch 640 ~ 350 31.469KHz 31.778 µ sec 3.813 µ sec 1.589 µ sec 26.
Resolution Vertical Frequency (O) Vertical Period (P) Vertical Pulse Width (Q) Vertical Back Porch (R) Vertical Active Area (S) Vertical Front Porch 640 ~ 350 70.080Hz 14.268msec 0.064msec 1.716msec 11.504msec 0.985msec 720 ~ 400 70.080Hz 14.268msec 0.
Signal Identification for Raster Preset U00 U00 U01 U02 U03 U04 U05 U06 U07 U08 U10 U11 U12 U13 F00 F01 F02 F02 F02 F02 F02 F03 F03 F04 F05 F05 F05 NTSC/ M-NTSC RGB 15KHz P AL/ SECAM VESA I-Standard 640 2 480 (31.5KHz/ 60Hz) IBM 640 2 350 (31.5KHz/ 71Hz) IBM 640 2 400 (31.
Service and Support Policies NEC Technologies is committed to providing the highest quality service and support for your MultiSync presentation monitor. A customer service group that is dedicated to the support of this product line is available to provide a single point of contact for technical support, trouble shooting, service and repair issues.
Ein wichtiger Punkt beim Kauf des Geräts NEC XV29 Plus (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NEC XV29 Plus noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NEC XV29 Plus - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NEC XV29 Plus reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NEC XV29 Plus erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NEC XV29 Plus besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NEC XV29 Plus verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NEC XV29 Plus. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NEC XV29 Plus gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
