Benutzeranleitung / Produktwartung PX-50XM6G des Produzenten NEC
Zur Seite of 48
PlasmaSync Plasma Monitor (Enhanced split screen Model) PlasmaSync 42XM5 PX-42XM5G PlasmaSync 50XM6 PX-50XM6G PlasmaSync 60XM5 PX-60XM5G User’ s Manual Benutzerhandbuch Manuel d’utilisation Manual.
User’ s Manual (Enhanced split screen Model) ENGLISH.
En-2 Precautions Please read this manual carefully before using your plasma monitor and keep the manual handy for future reference. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO US E R- S ER VI C EA BL E P ARTS INSIDE.
En-3 CAUTION When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country/area.
En-4 Contents Contents of the Package 䡺 Plasma monitor ( ⳯ 1) 䡺 Power cord ( ⳯ 1, 3 m/9.8 feet) 䡺 Remote control ( ⳯ 1) 䡺 AAA Batteries ( ⳯ 2, Manganese battery for remote control) 䡺.
En-5 50 mm (2") Wall Wall 50 mm (2") 50 mm (2") 50 mm (2") 50 mm (2") Y ou can attach your optional mounts or stand to the plasma monitor in one of the following two ways: * While it is upright. (See Drawing A) * As it is laid down with the screen face down (See Drawing B).
En-6 Note: 1. The VIDEO1 and RGB1 terminals can be used for either INPUT or OUTPUT . When LOOP OUT is ON, do not connect an OUTPUT signal fr om another unit as it may damage the other unit due to an extraor dinary load. 2. LOOP OUT can not be turned ON while signals are input to the RGB1 terminal.
En-7 IN OUT 4 REMOTE EXTERNAL CONTROL Remote Control Cable * T o Remote Jack Appro x. 7 m / 23 ft MENU/ENTER INPUT SELECT DOWN UP LEFT/ - RIGHT/ + /EXIT VOLUME MENU/ENTER INPUT SELECT DOWN UP LEFT/ - RIGHT/ + /EXIT VOLUME T op side Bottom side 90 ° : RGB : RGB : AUTO : 1080B : OFF : OFF 1024 ⴒ 768 EXIT SEL.
En-8 q Power T urns the monitor ’ s power on and off. w Remote sensor window Receives the signals from the remote control. e POWER/ST ANDBY indicator When the power is on ............................. Lights green. When the power is in the standby mode .
En-9 A AC IN Connect the included power cord here. B EXT SPEAKER L and R Connect speakers (optional) here. Maintain the correct polarity . Connect the (positive) speaker wire to the EXT SPEAKER terminal and the (negative) speaker wire to the EXT SPEAKER terminal on both LEFT and RIGHT channels.
En-10 A AC IN Connect the included power cord here. B EXT SPEAKER L and R Connect speakers (optional) here. Maintain the correct polarity . Connect the (positive) speaker wire to the EXT SPEAKER terminal and the (negative) speaker wire to the EXT SPEAKER terminal on both LEFT and RIGHT channels.
En-11 VIDEO (IN/OUT) (IN/OUT) AUDIO 1 DVD 1 / HD 1 R 1 3 2 ( MONO ) L Y Cb /Pb Cr/ Pr RGB 2 / DVD 2 / HD 2 RGB 1 VD HD DVI ( Digital RGB ) R L AUDIO 2 ( MONO ) R L AUDIO 3 ( MONO ) R/Cr/Pr G /Y B/ Cb/.
En-12 q POWER ON/ST ANDBY Switches the power on/standby . (This does not operate when the POWER/ST ANDBY indicator of the plasma is off.) w RGB/PC Press this button to select RGB/PC as the source. RGB/PC can also be selected using the INPUT SELECT button on the monitor .
En-13 Basic Operations POWER T o turn the unit ON and OFF: 1. Plug the power cord into an active AC power outlet. 2. Press the Power button (on the unit). The monitor ’ s POWER/ST ANDBY indicator turns red and the standby mode is set. 3. Press the POWER ON button (on the remote control) to turn on the unit.
En-14 WIDE Operations Wide Screen Operation (manual) W ith this function, you can select one of seven screen sizes. When viewing videos or digital video discs 1. Press the WIDE button on the remote control. 2. W ithin 3 seconds ... Press the WIDE button again.
En-15 FULL size screen The image is expanded in the horizontal and vertical direction. ZOOM size screen When wide signals are input. TRUE The image is true resolution. FULL Information Supported resolution See page En-41 for details on the display output of the various VESA signal standards supported by the monitor .
En-16 Showing a couple of pictures on the screen at the same time * There may be some RGB-input signals that may not be displayed as not all signals are supported. 1. Press the button to select a screen mode from among single mode, side-by-side, and picture-in-picture.
En-17 Operations in the Picture-in-picture mode T o move the position of the sub screen, press the cursor or button. T o change the size of the sub screen, press the button.
En-18 Menu Operations The OSM window is displayed with respect to the screen as shown on the diagram. * Depending on the screen’ s mode, the OSM may be displayed differently .
En-19 Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET OSM ANGLE “V” REFERENCE PICTURE CONTRAST ←→ 0 ← 52 → 72 YES YES En-21 BRIGHTNESS ←→ 0 ← 32 → 64 YES .
En-20 Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET OSM ANGLE “ V ” REFERENCE OPTION2 PWR. MGT . OFF ←→ ON YES NO En-26 CINEMA MODE OFF ←→ ON YES NO En-26 LONG LIFE PLE AUTO/LO.
En-21 Picture Settings Menu Adjusting the picture The contrast, brightness, sharpness, color and tint can be adjusted as desired. Example: Adjusting the contrast On “CONTRAST” of “PICTURE” menu, adjust the contrast.
En-22 Adjusting the color to the desired level Use this procedure to adjust the white balance for each color temperature to achieve the desired color quality . Example: Adjusting the “ GAIN RED ” of “ HIGH ” color temperature Set “ ADV ANCED OSM ” to “ ON ” in the MAIN MENU.
En-23 Audio Settings Menu Adjusting the treble, bass and left/right balance and audio input select The treble, bass and left/right balance can be adjusted to suit your tastes. Example: Adjusting the bass On “BASS” of “AUDIO” menu, adjust the bass.
En-24 Option1 Settings Menu Setting the on-screen menu This sets the position of the menu, the display format (horizontal or vertical) etc. Example: T urning the DISPLA Y OSM off On “ OPTION1 ” menu, select “ OSM ” , then press the MENU/ ENTER button.
En-25 Setting high definition images to the suitable screen size Use this procedure to set whether the number of vertical lines of the input high definition image is 1035 or 1080. Example: Setting the “ HD SELECT ” mode to “ 1035I ” On “ HD SELECT ” of “ OPTION1 ” menu, select “ 1035I ” .
En-26 Option2 Settings Menu Set “ADV ANCED OSM” to “ON” in the MAIN MENU. Setting the power management for computer images This energy-saving (power management) function automatically reduces the monitor ’ s power consumption if no operation is performed for a certain amount of time.
En-27 ORBITER Use this to set the picture shift. Example: Setting “ ORBITER ” to “ AUTO2 ” On “ ORBITER ” of “ LONG LIFE ” menu, select “ AUTO2 ” . SEL. ADJ. RETURN EXIT LONG LIFE PLE ORBITER INVERSE SCREEN WIPER SOFT FOCUS : AUTO : A UTO2 : OFF : OFF : OFF Information 䡵 ORBITER settings OFF: Orbiter mode does not function.
En-28 SCREEN WIPER When this is set to ON, a white vertical bar moves repeatedly from the left and of the screen to the right end at a constant speed. Example: Setting “ SCREEN WIPER ” to “ ON ” On “ SCREEN WIPER ” of “ LONG LIFE ” menu, select “ ON ” .
En-29 Setting the picture size for RGB input signals Use this procedure to switch the setting to “ ON ” or “ OFF ” . * This function is available only for 50 and 60 inch types. Example: Setting the “ PICTURE SIZE ” mode to “ OFF ” On “ PICTURE SIZE ” of “ OPTION2 ” menu, select “ OFF ” .
En-30 䡵 Special characters in the PROGRAM TIMER screen When the setting item includes gray indication, it does not function under the timer ’ s setting. PROGRAM TIMER DA Y MON TUE SA T * FRI — SA T * — INPUT RG B2 — VIDEO1 DVD1 — — RGB1 — FUNC.
En-31 The “ REPEA T TIMER ” screen appears. Adjust the items. Use the 䊴 and 䊳 buttons to select “ SINGLE ” . Use the ▲ and ▼ buttons to select the item, then press the 䊴 and 䊳 buttons to set.
En-32 Enabling/disabling remote control wireless transmission This function enables/disables remote control wireless transmission. Example: Setting “ OFF ” On “ IR REMOTE ” of “ OPTION3 ” menu, select “ OFF ” , then press the MENU/ENTER button.
En-33 Video W all setting Use this feature to configure a (2 ⳯ 2, 3 ⳯ 3, 4 ⳯ 4, 5 ⳯ 5, 5 ⳯ 1, 1 ⳯ 5) video wall. On “ OPTION3 ” menu, select “ VIDEO W ALL ” , then press the MENU/ENTER button. The “ VIDEO W ALL ” screen appears.
En-34 IMAGE ADJUST The position of the image can be adjusted and flickering of the image can be corrected. Example: Adjusting the vertical position On “ VIDEO W ALL ” menu, select “ IMAGE ADJUST ” , then press the MENU/ENTER button. The “ IMAGE ADJUST ” screen appears.
En-35 Option4 Settings Menu Set “ADV ANCED OSM” to “ON” in the MAIN MENU. Removing the sub screen area when there is no input signal detected for the sub picture This function automatically removes the black frame of the sub screen when there is no sub screen input signal.
En-36 RGB1 RGB1 RGB1 RGB1 RGB1 RGB1 Side-by-Side Picture-in-Picture SELECT/ FREEZE button SELECT/ FREEZE button S BY S1 RGB1 RGB1 or S BY S2 Switching the input source quickly This feature enables quick input selection. After setting ON, press the CLEAR/SEAMLESS SW button for quick switching between the two selected input signals.
En-37 Color System Settings Menu Setting the video signal format Use these operations to set the color systems of composite video signals or Y/C input signals. Example: Setting the color system to “ 3.58 NTSC ” On the MAIN MENU, select “ COLOR SYSTEM ” , then press the MENU/ENTER button.
En-38 Application These specifications cover the communications control of the plasma monitor by external equipment. Connections Connections are made as described below . Connector on the plasma monitor side: EXTERNAL CONTROL connector . Use a crossed (reverse) cable.
En-39 1/8 Stereo Mini Jack (not supplied) for REMOTE IN/OUT Plasma monitor REMOTE IN Plasma monitor REMOTE OUT GND VDD (DC +3 V) DA T A (DC +5 V) GND DA T A (C-MOS DC +5 V) Following is the connection example of STB (Set-top Box) using the REMOTE IN/OUT connectors of the plasma monitor .
En-40 If the picture quality is poor or there is some other problem, check the adjustments, operations, etc., before requesting service. T r oubleshooting *1 Overheat protector If the monitor becomes too hot, the overheat protector will be activated and the monitor will be turned off.
En-41 T able of Signals Suppor ted Suppor ted resolution (42XM5) • When the screen mode is NORMAL, each signal is converted to a 768 dots ⳯ 768 lines signal. (Except for * 3 ) • When the screen mode is FULL, each signal is converted to a 1024 dots ⳯ 768 lines signal.
En-42 *1 Only when using a graphic accelerator board that is capable of displaying 852 ⳯ 480. *2 The picture is displayed in the original resolution. The picture will be compressed for other signals. *3 Aspect ratio is 5:4. This signal is converted to a 720 dots ⳯ 768 lines signal.
En-43 Suppor ted resolution (50XM6/60XM5) • When the screen mode is NORMAL, each signal is converted to a 1024 dots ⳯ 768 lines signal. (Except for * 2, 3 ) • When the screen mode is TRUE, the picture is displayed in the original resolution. • When the screen mode is FULL, each signal is converted to a 1365 dots ⳯ 768 lines signal.
En-44 *1 Only when using a graphic accelerator board that is capable of displaying 852 ⳯ 480. *2 The picture is displayed in the original resolution. *3 The aspect ratio is 5:4. This signal is converted to a 960 dots ⳯ 768 lines signal. *4 Normally the RGB select mode suite for the input signals is set automatically .
En-45 Specifications Screen Size 921.6 mm(H) ⳯ 515.3 mm(V) 36.3 inches(H) ⳯ 20.3 inches(V) diagonal 42 inches Aspect Ratio 16 : 9 Resolution 1024 pixels(H) ⳯ 768 pixels(V) Pixel Pitch 0.9 mm(H) ⳯ 0.671 mm(V) 0.036 inches(H) ⳯ 0.027 inches(V) Signals Synchronization Range Horizontal : 15.
En-46 Specifications Screen Size 1 104 mm(H) ⳯ 621 mm(V) 43.4 inches(H) ⳯ 24.4 inches(V) diagonal 50 inches Aspect Ratio 16 : 9 Resolution 1365 pixels(H) ⳯ 768 pixels(V) Pixel Pitch 0.81 mm(H) ⳯ 0.81 mm(V) 0.032 inches(H) ⳯ 0.032 inches(V) Signals Synchronization Range Horizontal : 15.
En-47 Specifications Screen Size 1319 mm(H) ⳯ 742 mm(V) 51.9 inches(H) ⳯ 29.2 inches(V) diagonal 60 inches Aspect Ratio 16 : 9 Resolution 1365 pixels(H) ⳯ 768 pixels(V) Pixel Pitch 0.97 mm(H) ⳯ 0.97 mm(V) 0.038 inches(H) ⳯ 0.038 inches(V) Signals Synchronization Range Horizontal : 15.
Ein wichtiger Punkt beim Kauf des Geräts NEC PX-50XM6G (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NEC PX-50XM6G noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NEC PX-50XM6G - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NEC PX-50XM6G reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NEC PX-50XM6G erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NEC PX-50XM6G besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NEC PX-50XM6G verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NEC PX-50XM6G. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NEC PX-50XM6G gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
