Benutzeranleitung / Produktwartung NP215 des Produzenten NEC
Zur Seite of 97
Por tabl e Project or N P 21 6 / N P 21 5 / N P 21 0 / N P 11 5 / N P 11 0 User’s Man ual The NP 2 1 0 a nd NP1 1 5 are n ot dist ribute d in Nor th A meric a.
2nd ed itio n, Februar y 201 0 • DLPandB rilli antCo loraretrad emark sofT exasIn strum ents. • IBMisat radem arkorreg isteredt radem arkofIntern ationa lBusin essMac hine sCorp oratio n.
i Important Information Safety Cautions Precautions Please read this manual carefully before using your NEC NP216/NP215/NP210/NP115/NP110 projector and keep the manual handy f or future reference. CA UTION T o turn off main power , be sure to remov e the plug from power outlet.
ii Important Information RF Interference (for USA only) W ARNING The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified b y NEC Display Solutions of Amer ica, Inc. in this manual. F ailure to comply with this gov er nment regu- lation could v oid y our right to operate this equipment.
iii Important Information Fire and Shock Pr ecautions • Ensure that there is sufcient ventilation and that vents are unobstr ucted to prev ent the build-up of heat inside your projector . Allow at least 4 inches (10cm) of space between y our projector and a wall.
iv Important Information - If the projector does not operate normally when you f ollow the instructions described in this user's manual. - If the projector has been dropped or the cabinet has been damaged. - If the projector e xhibits a distinct change in perf or mance , indicating a need for service.
v Important Information CA UTION: • DONOT TOUCH THE LAMPimmediately afterit hasbeenused. It willbe e xtremelyhot. T ur nthe projectoroff and then disconnect the power cab le. Allow at least one hour f or the lamp to cool bef ore handling.
vi T able of Contents Important Information ............................................................................................ i T able of Contents .............................................................................................
vii T able of Contents 7 T ur ning off the Projector .............................................................................................. 27 After Use.......................................................................................
1 1. Intr oduction 1 What’ s in the Box? Make sure y our box contains e verything listed. If any pieces are missing, contact your dealer . Please sav e the or iginal bo x and packing materials if y ou ev er need to ship your projector .
2 1. Introduction Intr oduction to the Projector This section introduces you to y our new projector and describes the features and controls. Congratulations on Y our Purchase of the Pr ojector This DLP ® projector is one of the very best projectors availab le today .
3 1. Introduction • Preventingunauthorizeduseoftheprojector Enhanced smar t secur ity settings for ke yword protection, cabinet control panel lock, security slot, chain opening tohelppre ventunauthorizedaccess ,adjustmentsandtheftdeterrence.
4 1. Introduction Part Names of the Pr ojector Zoom Lev er ( → page 23 ) Controls ( → page 5 ) Lens Lens Cap Built-in Security Slot ( )* Adjustable Tilt Foot Le ver ( → page 22 ) Adjustable .
5 1. Introduction T op Features 1. POWERButton(ON/ST ANDBY)( ) ( → page 18 , 27 ) 2. PO WER Indicator ( → page 17 , 18 , 27 , 73 ) 3. ST A TUS Indicator ( → page 73 ) 4. LAMPIndicator ( → page 70 , 73 ) 5. AUT OADJ.
6 1. Introduction T erminal Panel Features 1. COMPUTER OUT Connector (Mini D-Sub 15 Pin) ( → page 13 ) 2 . COMPUTER IN/ Component Input Connector (MiniD-Sub15Pin) ( → page 12 , 13 , 14 ) 3.
7 1. Introduction ＋ 3 7 5 6 1 2 10 12 13 11 14 9 4 8 26 27 28 16 17 22 24 25 21 15 20 19 18 23 29 Part Names of the Remote Contr ol 1. Infrared T ransmitter ( → page 8 ) 2. POWERONButton ( → page 18 ) 3. POWEROFFButton ( → page 27 ) 4, 5,6.
8 1. Introduction 30° 30° 30° 30° OPEN Remote Control Pr ecautions • Handletheremotecontrolcarefully . • Iftheremotecontrolgetswet,wipeitdryimmediately . • A voide xcessiveheatandhumidity .
9 3 2 1 2. Installation and Connections This section describes how to set up your projector and ho w to connect video and audio sources. Y our projector is simple to set up and use.
10 2. Installation and Connections Throw Distance and Scr een Size The following shows the proper relative positions of the projector and screen. Refer to the table to deter mine the position of installation. Distance Chart C D B Screen center Lens center Screen bottom 2.
11 2. Installation and Connections W ARNING * Installing your projector on the ceiling must be done by a qualified technician. Contact your NEC dealer f or more inf or mation. * Do not attempt to install the projector yourself . • Only use your projector on a solid, lev el surface .
12 2. Installation and Connections COMPUTER IN PHONE PHONE AUDIO IN Making Connections Connecting Y our PC or Macintosh Computer NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC.
13 2. Installation and Connections Connecting an External Monitor Y ou can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer analog image you’ re projecting. NOTE:Daisychainconnectionisnotpossible.
14 2. Installation and Connections AUDIO IN LR AUDIO OUT L R Component YC bC r COMPUTER IN AUDIO IN NOTE:RefertoyourDVDplayer'sowner'smanualformoreinformationaboutyourDVDplayer'svideooutputrequirements.
15 2. Installation and Connections AUDIO IN LR AUDIO OUT L R VIDEO OUT S-VIDEO VIDEO VIDEO IN S-VIDEO IN AUDIO IN Connecting Y our VCR Use audio equipment f or stereo sound.
16 2. Installation and Connections Connecting to a Network (NP216/NP215 only) TheprojectorcomesstandardwithaLANpor t(RJ-45)whichprovidesaLANconnectionusingaLANcab le. Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings f or the projector ov er a LAN.
17 2. Installation and Connections Connecting the Supplied Power Cable Connect the supplied power cab le to the projector . First connect the supplied power cable's three-pin plug to the A C IN of the projector , and then connect the other plug of the supplied power cab le in the wall outlet.
18 3. Pr ojecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen. 1 T urning on the Projector 1. Remove the lens cap • Do not re mo v e the len s cap b y pulli ng on th e st ring.
19 3. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select scr een) When y ou first turn on the projector , you will get the Star tup menu. This menu gives you the oppor tunity to select one of the 21 menu languages. T oselectamenulangua ge,f ollowthesesteps: 1.
20 3. Projecting an Image (Basic Operation) Selecting a Sour ce Selecting the computer or video source NOTE:T urnonthecomputerorvideosourceequipmentconnectedtotheprojector . SelectingfromSour ceList Press and quickly release the SOURCE button on the projector cabinet to displa y the Source list.
21 3. Projecting an Image (Basic Operation) Adjusting the Pictur e Size and Position Usetheadjustabletiltf oot,thezoomle verorthef ocusr ingtoadjustthepicturesizeandposition. In this chapter dra wings and cables are omitted f or clar ity .
22 3. Projecting an Image (Basic Operation) 2 1 4 3 Adjustable Tilt Foot V entilation outlet Adjustable Tilt Foot Le ver Adjust the Tilt Foot 1. Lift the front edge of the projector . CA UTION: Do not tr y to touch the ventilation outlet during Tilt Foot adjustment as it can become heated while the projector is turned on and after it is turned off.
23 3. Projecting an Image (Basic Operation) Zoom UsetheZOOMle vertoadjusttheimagesiz eonthescreen. Zoom Lev er Focus Use the FOCUS ring to obtain the best focus .
24 3. Projecting an Image (Basic Operation) Corr ecting Keystone Distortion Correcting Keystone Distortion If the screen is tilted vertically , keystone distortion becomes large.
25 3. Projecting an Image (Basic Operation) Adjusting with the remote contr ol 1. Press the KEYST ONE button. The Ke ystone bar will be displayed. 2. Use the or button to correct the ke ystone distortion. Adjust so that the right and left sides are parallel.
26 3. Projecting an Image (Basic Operation) Optimizing Computer Signal Automatically Adjusting the Image Using Auto Adjust Optimizingacomputerimageautomatically . PresstheA UTOADJ . buttontooptimizeacomputerimageautomatically .
27 3. Projecting an Image (Basic Operation) 7 T urning off the Pr ojector T oturnofftheprojector: 1. First, press the (PO WER) button on the projector cabinet or the PO WER OFF b utton on the remote con- trol. The [POWER OFF / ARE Y OU SURE? /CARBON SA V - INGS- SESSION X.
28 3. Projecting an Image (Basic Operation) After Use Preparation: Makesurethattheprojectoristurnedoff. 1. Disconnect any other cab les.
29 1 T urning off the Image and Sound Press the A V -MUTE button to tur n off the image and sound for a shor t period of time. Press again to restore the image and sound. NOTE: Even though the image is turned off, the menu still remains on the screen.
30 4. Convenient Features Changing Eco Mode This f eature enables y ou to select two brightness modes of the lamp: OFFandONmodes. Thelamplifecanbee xtendedbyturningonthe[ECOMODE]. [ECOMODE] Description Status of LAMP indicator [OFF] This is the def ault setting (100% Brightness).
31 4. Convenient Features Checking Energy-Saving Ef fect [CARBON METER] This feature will show energy-saving effect in ter ms of CO 2 emission reduction (kg) when the projector’ s [ECO MODE] issetto[ON]. Thisfeatureiscalled[CARBONMETER].
32 4. Convenient Features Pr eventing the Unauthorized Use of the Projector [SECURITY] Ak eyw ordcan beset f ory ourprojectorusingthe Menutoa voidoperation byan unauthorizeduser . Whenak eyw ord is set, tur ning on the projector will displa y the K eyword input screen.
33 4. Convenient Features 7. T ype in the same combination of buttons and press the ENTER b utton. The confirmation screen will be displayed. 8. Select [YES] and press the ENTER button. The SECURITY function has been enabled. T oturnonthepr ojectorwhen[SECURITY]isenabled: 1.
34 4. Convenient Features T odisabletheSECURITYfunction: 1. Press the MENU button. The menu will be displa yed. 2. Select [SETUP] → [INST ALLA TION] → [SECURITY] and press the ENTER button. The OFF/ON menu will be displa yed. 3. Select [OFF] and press the ENTER button.
35 4. Convenient Features 30˚ 30˚ 7 Using the Optional Remote Mouse Receiver (NP01MR) The optional remote mouse receiver enables you to operate your computer’ s mouse functions from the remote control. It is a great con venience f or clicking through your computer-gener ated presentations.
36 4. Convenient Features Operatingy ourcomputer’ smousefromtheremotecontr ol Y ou can operate y our computer’ s mouse from the remote control. P AGE / Button: scrolls the vie wing area of the windo w or to mo ve to the previous or ne xt slide in P ower- P oint on your computer .
37 4. Convenient Features Network Setting by Using an HTTP Br owser (NP216/NP215 only) Overview Connecting the projector to a network allows the Aler t Mail setting ( → page 39 ) and the projector control from a computer via the network.
38 4. Convenient Features NetworkSettings http://<the projector’ s IP address> /index.html DHCP .................................. Enabling this option automatically assigns an IP address to the projector from your DHCP ser ver .
39 4. Convenient Features AlertMailSetting http://<the projector’ s IP address>/lanconfig.html This option notifies your computer of an error message via e-mail when using wired LAN. An error message notification will be sent when the projector lamp has reached the end of its usable lif e or an error occurs in the projector .
40 4. Convenient Features V iewing 3D Images The projector provides 3D images to a user wearing commercially av ailable DLP ® Link compatible LCD shutter e ye- glasses.
41 4. Convenient Features On-screenmenuf or3Dimages F ollow the steps to displa y the 3D menu. 1. Press the MENU b utton. The[SOURCE]menuwillbedispla yed. [NP215/NP210/NP115/NP110] [NP216] 2. Press the b utton twice.
42 4. Convenient Features In ver tingtheorderofdispla yingtheimagesforlefte yeandrighteye[L/RINVERT] This function changes the order of displa ying the images f or left ey e and right ey e. Change the setting if you ha ve difficulty seeing 3D images.
43 5. Using On-Scr een Menu 1 Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected.
44 5. Using On-Screen Menu Menu Elements Slide bar Solid triangle T ab Radio button High Altitude symbol Menuwindowsordialogbo xestypicallyha vethefollo wingelements: Highlight ............................. Indicates the selected menu or item.
45 5. Using On-Screen Menu List of Menu Items Some menu items are not a vailab le depending on the input source. Menu Item Default Options SOURCE COMPUTER COMPUTER1, COMPUTER 2 (NP216 only) * VIDE.
46 5. Using On-Screen Menu SETUP OPTIONS(2) OFF TIMER OFF OFF , 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00 ST ANDBY MODE NORMAL NORMAL, POWER-SA VING A UTO POWER ON(A C) OFF OFF , ON A UTO POWER ON(COMP .
47 5. Using On-Screen Menu Menu Descriptions & Functions [SOURCE] [NP215/NP210/NP115/NP110] [NP216] COMPUTER Selects the computer connected to your COMPUTER IN input connector . NOTE: • WhenthecomponentinputsignalisconnectedtotheCOMPUTERINconnector ,select[COMPUTER].
48 5. Using On-Screen Menu Menu Descriptions & Functions [ADJUST] [PICTURE] [PRESET] Thisfunctionallowsy outoselectoptimizedsettingsf oryourprojectedimage. Y ou can adjust neutral tint f or yellow , cyan or magenta.
49 5. Using On-Screen Menu SelectingGammaCorrectionMode[GAMMACORRECTION] Each mode is recommended f or : DYNAMIC .............. Creates a high-contrast picture. NA TURAL ............... Natural reproduction of the picture. BLACK DET AIL .
50 5. Using On-Screen Menu [RESET] The settings and adjustments f or [PICTURE] willbe returned to the factorysettings with the exception of thef ollowing; Presetnumbersand[REFERENCE]withinthe[PRESET]screen.
51 5. Using On-Screen Menu [IMA GE OPTIONS] AdjustingClockandPhase[CLOCK/PHASE] This allows y ou to manually adjust CLOCK and PHASE. CLOCK ................... Use this item to fine tune the computer image or to remove any vertical banding that might appear .
52 5. Using On-Screen Menu AdjustingHorizontal/V er ticalP osition[HORIZONT AL/VERTICAL] Adjuststheimagelocationhorizontallyandvertically . - Animagecanbedistor tedduringtheadjustmentof[CLOCK]and[PHASE].
53 5. Using On-Screen Menu NA TIVE The projector displays the current image in its true resolution when the incoming computer signal has a lower resolution than the projector’ s nativ e resolution.
54 5. Using On-Screen Menu T urningonNoiseReduction[NOISEREDUCTION] This function allows y ou to select the le vel of noise reduction. Theprojectorissettotheoptimizedle velf oreachsignalatthef actor y .
55 5. Using On-Screen Menu Menu Descriptions & Functions [SETUP] [GENERAL] Correcting V erticalKeystoneDistortionManually[KEYST ONE] Y ou can correct vertical distor tion manually .
56 5. Using On-Screen Menu SettingEcoMode[ECOMODE] This feature turns on or off the ECO mode. The lamp life can be extended by selecting [ON]. Selecting [ON] also decreasesf annoisewhencomparedto[OFF]mode.
57 5. Using On-Screen Menu [MENU] SelectingMenuColor[COLORSELECT] Y ou can choose between two options f or menu color : COLOR and MONOCHROME.
58 5. Using On-Screen Menu SelectingMenuDispla y Time[DISPLA Y TIME] This option allows y ou to select how long the projector waits after the last touch of a button to turn off the menu. The presetchoicesare[MANU AL],[A UT O5SEC],[A UT O15SEC],and[A UTO45SEC].
59 5. Using On-Screen Menu [INST ALLA TION] SelectingProjectorOrientation[ORIENT A TION] This reorients your image f or y our type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection.
60 5. Using On-Screen Menu SelectingCommunicationSpeed[COMMUNICA TIONSPEED] This f eature sets the baud r ate of the PC Control port (D-Sub 9P).
61 5. Using On-Screen Menu [OPTIONS(1)] SelectingFanMode[F ANMODE] This option allows y ou to select three modes f or f an speed: Auto mode, High speed mode , and High Altitude mode. AUTO ..................... The built-in fans automatically run at a variable speed according to the internal temperature.
62 5. Using On-Screen Menu EnablingKe ySoundandErrorSound[BEEP] This f eature turns on or off the button sound or alar m when the f ollowing operations are perf or med.
63 5. Using On-Screen Menu [OPTIONS(2)] UsingOff Timer[OFF TIMER] Theremainingcountdowntimewillbedispla yedatthebottomofthemenuwhenthe[OFF TIMER]ispreset. 1. Select y our desired time between 30 minutes and 16 hours: OFF , 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.
64 5. Using On-Screen Menu T urning Onthe Pr ojector By Applying Computer Signal [A UT OPO WER ON(COMP .)/[A UTO PO WER ON(COMP1)]forNP216] When the projec.
65 5. Using On-Screen Menu [3D] [NP215/NP210/NP115/NP110] [NP216] Selecting input connected to a source of 3D images [COMPUTER /VIDEO / S-VIDEO]/[COMPUTER 1/COM- PUTER2/VIDEO/S-VIDEO](NP216only) This function s witches the 3D mode between ON and OFF f or each input.
66 5. Using On-Screen Menu 7 Menu Descriptions & Functions [INFO.] Displa ys the status of the current signal and lamp usage. This item has three pages (f our pages on NP216/NP215). The inf ormation included is as follows: TIP:PressingtheHELPbuttonontheremotecontrolwillshowthe[INFO.
67 5. Using On-Screen Menu [SOURCE] [SOURCENAME] [HORIZONT ALFREQUENCY] [VER TICALFREQUENCY] [SIGNAL TYPE] [VIDEO TYPE] [SYNC TYPE] [SYNCPOLARITY] .
68 5. Using On-Screen Menu Menu Descriptions & Functions [RESET] [NP210/NP115/NP110] [NP216/NP215] ReturningtoFactoryDefault[RESET] The RESET feature allows y ou to change adjustme.
69 6. Maintenance This section descr ibes the simple maintenance procedures you should f ollow to clean the cabinet and the lens, and replace the lamp . 1 Cleaning the Cabinet and the Lens 1. T urn off the projector before c leaning. 2. Clean the cabinet periodically with a damp cloth.
70 6. Maintenance Replacing the Lamp When the lamp reaches the end of its life , the LAMP indicator in the cabinet will b link red. Ev en though the lamp may still be working, replace the lamp to maintain the optimal projector perf or mance. After replacing the lamp, be sure to clear the lamp hour meter .
71 6. Maintenance 2. Remove the lamp housing. (1) Loosen the three screws securing the lamp housing until the phillips screwdriver goes into a freewheeling condi- tion.
72 6. Maintenance 5. Connect the supplied power cab le, and turn on the pr ojector . 6. Finally , select the men u → [RESET] → [CLEAR LAMP HOURS] to reset the lamp usage hours.
73 7. Appendix 1 T r oubleshooting This section helps you resolv e problems you ma y encounter while setting up or using the projector . Indicator Messages Power Indicator Indicator Condition Projector Condition Note Off The power cable is unplugged. – Blinking light Green 0.
74 7. Appendix CommonProb lems&Solutions ( → “P ow er/Status/Lamp Indicator” on page 73 .) Problem Chec k TheseItems Does not turn on or shut down • Check that the.
75 7. Appendix Ifthereisnopicture, orthepictureisnotdisplay edcorrectly . • P oweronprocessf ortheprojectorandthePC . Be sure to connect the projector and notebook PC while the projector is in standby mode and bef ore tur ning on the power to the notebook PC .
76 7. Appendix Specifications This section provides technical inf or mation about the NP216/NP215/NP210/NP115/NP110 projector's performance. Model Number NP21 6/ NP21 5/ NP21 0/ NP1 1 5 /NP1 1 0 Optical Projection System Single DLP ® chip(0.
77 7. Appendix Mechanical Installation Orientation: Desktop/F ront, Desktop/Rear, Ceiling/F ront, Ceiling/Rear Dimensions 12.2"(W)x3.7(H)x9.7"(D) 310 mm (W) x 95 mm (H) x 247 mm (D) (not including protrusions) Net W eight 5.5 lbs / 2.
78 7. Appendix 310(12.2) 96(3.8) 247(9.7) 68.4 (2.7) 95 (3.7) Cabinet Dimensions Lens center Lens center Unit: mm (inch) NP215 NP216 NP210/NP115/NP110.
79 7. Appendix Mini D-Sub 15 Pin Connector Pin Assignments of D-Sub COMPUTER Input Connector Signal Le vel Video signal : 0.7Vp-p (Analog) Sync signal : TTL le vel 5 14 23 10 11 12 13 14 15 69 78 PinNo.
80 7. Appendix Compatible Input Signal List Horizontal: 15KHzto100KHz(RGB: 24KHzorov er) V ertical:50Hzto120Hz(Signalswithhigherthanrefreshr ate85Hzsuppor tresolutionsof1024x768orlow er .
81 7. Appendix NOTE: Contact your local dealer for a full list of the PC Control Codes if needed. Cable Connection Communication Protocol Baud rate .........................................38400 bps Data length ......................................8 bits Parity .
82 7. Appendix No image is displayed from your PC or video equipment to the projector . Still no image even though you connect the projector to the PC first, then start the PC. Enabling your notebook PC’ s signal output to the projector . • A combination of function keys will enable/disable the exter - naldisplay.
83 7. Appendix In the space below please describe your problem in detail. Information on application and environment where your projector is used Projector Model number: Serial No.
84 7. Appendix T ravelCar e Guide T ravelCar e - a service for international travelers This product is eligible for “T ra velCare”, NEC’s unique inter national warranty . Please note that T ravelCare cov erage diff ers in part from coverage under the warranty included with the product.
85 7. Appendix NEC Corporation of Malaysia Sdn. Bhd. Address: 33rdFloor,Menara T AOne,22,JalanP . Ram - lee, 50250 K uala Lumpur , Malaysia T elephone: +60321783600(ISDN) F axLine: +60321783789 Email Address: necare@nsm.
86 7. Appendix T O: NECorNEC’sA uthorizedSer viceStation: FM: (Compan y & Name with signature) Dear Sir (s), I would like to apply y our T rav elCare Service Program bas.
87 7. Appendix 5. LoanServiceChargesandConditions: Upon acceptance of this NEC Projector, Customer agrees to assume liability for this loan unit.
© NEC Displa y Solutions, Ltd. 2009 - 2010 7N951471.
Ein wichtiger Punkt beim Kauf des Geräts NEC NP215 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NEC NP215 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NEC NP215 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NEC NP215 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NEC NP215 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NEC NP215 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NEC NP215 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NEC NP215. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NEC NP215 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
