Benutzeranleitung / Produktwartung MT1060 des Produzenten NEC
Zur Seite of 70
LCD Projector MT 1 065/MT1060 User’ s Manual.
LIMITED W ARRANTY Except as specified below , the warranty that ma y be provided by the dealer cov ers all defects in material or workmanship in this product. The follo wing are not covered b y the warranty: 1. Any product on which the serial number has been def aced, modified or remov ed.
NEC SOLUTIONS’ PROJECTOR PRODUCTS NEC Solutions (America), Inc. (hereafter NEC Solutions) warrants this product to be free from defects in material and workmanship under the following terms.
DECLARA TION OF CONFORMITY U.S. Responsible Party: Address: Tel. No.: NEC Solutions (America), Inc. 1250 N. Arlington Heights Road Itasca, Illinois 60143 (630) 467-5000 Type of Product: Equipment Clas.
Portable Projector MT1065/MT1060 User ’ s Manual English Deutsch Français Italiano Español Svenska.
E-2 Safety Cautions Precautions Please read this manual carefully bef ore using your NEC MT1065/ MT1060 Projector and keep the man ual handy for future reference . Y our serial number is located on the right side of your projector . Record it here: CA UTION T o turn off main power , be sure to remove the plug from po wer outlet.
E-3 Fire and Shock Pr ecautions 1. Ensure that there is sufficient v entilation and that vents are unob- structed to prev ent the build-up of heat inside your projector . Allow at least 3 inches (10 cm) of space between your projector and a wall. 2. Prev ent foreign objects such as paper clips and bits of paper from falling into y our projector.
E-4 T ABLE OF CONTENTS Important Information ..................................................... E-2 Safety Cautions ............................................................................................................... E -2 What's in the Box? .
E-5 INTRODUCTION Introduction to the Pr ojector This section introduces you to y our new MT1065/MT1060 Projector and describes the features and controls. Congratulations on Y our Purchase of The MT1065/ MT1060 Projector The MT1065/MT1060 is one of the v er y best projectors availab le today .
E-6 AC IN RG B 2 I N R GB O U T A U D IO A U D IO D V I I N U S B ( MOU S E /H U B ) R EM O TE A U D IO A U D IO G /Y B /C b H V RG B 1 I N S- V I D EO IN VI D EO I N A U D IO A U D IO A U D IO L/MON .
E-7 11 10 9 8 4 14 12 13 2 5 6 1 7 3 T op Features 1. POWER Button (ON / ST AND BY)( ) Use this button to turn the power on and off when the main po wer is supplied and the projector is in standb y mode. NOTE: T o tur n on or off the projector , press and hold this button for a mini- mum of two seconds.
E-8 1. RGB1 IN / Component Input Connector (Mini D-Sub 15 Pin) Connect your computer or other analog RGB equipment such as IBM compatible or Macintosh computers .
E-9 Part Names of the Remote Control NOTE: If you are using a Macintosh computer , you can click either the right-click or left-click button to activate the mouse. PJ F R EE Z E 3D REFORM P IC-M UTE E O FF V ID E O A U TO A D J. R GB V IE W ER L A SER ON POW ER SELECT 2 1 3 1.
E-10 22. PICTURE MUTE Button This button turns off the image and sound for a short period of time. Press again to restore the image and sound. NOTE: When the menu is displayed, a press of this button mutes an image and sound without turning off the menu.
E-11 Battery Installation 1. Press firmly and slide the batter y cov er off. 2. Remov e both old batteries and install new ones (AA). Ensure that y ou have the batteries' polarity (+/-) aligned correctly . 3. Slip the cov er back over the batteries until it snaps into place.
E-12 3 1 2 INST ALLA TION AND CONNECTIONS This section describes how to set up your projector and ho w to connect video and audio sources. T o the wall outlet. Setting Up the Scr een and the Projector Selecting a Location The further your projector is from the screen or wall, the larger the image.
E-13 NOTE: Distances may vary +/-5%. Reflecting the Image Using a mirror to reflect your projector's image enab les you to enjoy a much larger image.
E-14 Making Connections NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector .
E-15 T o connect SCART output (RGB) Before connections: An e xclusive SCART adapter (ADP-SC1) and a commercially av ailable SCART cab le are required for this connection. NOTE: • Audio signal is not available for this connection. • The RGB IN 2 connector does not support Plug & Play .
E-16 AUDIO OUT L AUDIO IN LR R Component YC b C r RGB 1 IN RGB 2 IN Connecting Y our DVD Player D VD play er Y ou can connect your projector to a D VD play er with component output or Video output. T o do so, simply: 1. T ur n off the po wer to your projector and D VD play er.
E-17 S-VIDEO IN AUDIO OUT LR AUDIO IN LR VIDEO OUT VIDEO IN S-VIDEO OUT VCR/ Laser disc pla yer Connecting Y our VCR or Laser Disc Player Audio equipment S-video cable (not supplied) Video cable (not .
E-18 PROJECTING AN IMAGE (BASIC OPERA TION) This section describes how to turn on the projector and to project a picture onto the screen. T ur ning on the Projector NOTE: • When plugging in or unplugging the supplied power cable, make sure that the main power switch is pushed to the off[O] position.
E-19 Selecting a Sour ce Selecting the computer or video source Using the Remote Control ASPECT OFF VIDEO AUTO ADJ. RGB VIEWER LASER ON 3D REFORM HELP POINTER VOLUME MAGNIFY ZOOM PIC-MUTE SLIDE FOLDER SLIDE LIST POWER FREEZE FOCUS Press any one of the RGB, VIDEO or VIEWER buttons .
E-20 Focus Use the FOCUS Button (+/-) to obtain the best f ocus. Correcting the Horizontal and V ertical Key- stone Distortion (3D Reform) Use the 3D Reform feature to correct k eystone (trapezoidal) distortion to make the top or bottom and the left or right side of the screen longer or shor ter so that the projected image is rectangular .
E-21 5. Press the ENTER button. 6. Use the SELECT button to mo ve the projected image frame as shown on the e xample. 7. Press the ENTER button. Screen The confirmation screen is displayed. On the Cornerstone adjustment screen, select “Exit” and then “OK”, or press the CANCEL but- ton on the remote control.
E-22 Optimizing RGB Picture Automatically Adjusting the Image Using Auto Adjust Optimizing RGB image automatically Press the A uto Adjust button to optimize an RGB image automatically .
E-23 Setting the function switch There are two s witches on the bottom of the batter y case: an applicable projector selector s witch (1) and laser enable/disable s witch (2). Chec k the projector being used and decide whether to enable or disab le laser, then set these s witches as necessar y using the tip of a thin ball-point pen.
E-24 ASPECT OFF VIDEO AUTO ADJ. RGB VIEWER LASER ON 3D REFOR M HELP POINTER VOLUME MAGNIFY ZOOM PIC-MUTE SLIDE FOLDER SLIDE LIST POWER FREEZE FOCUS ASPECT OFF VIDEO AUTO ADJ.
E-25 T ur ning Off the Image and Sound Press the Picture Mute button to turn off the image and sound for a shor t period of time. Press again to restore the image and sound. PIC-MUTE Freezing a Pictur e Press the F reeze button to freeze a picture . Press again to resume motion.
E-26 Using the USB Mouse Using the supplied USB mouse giv es you a smooth operation. A com- mercially av ailable USB mouse can be also used. NOTE: There may be some brands of USB mouse that the projector does not support. The scroll button on the supplied USB mouse does not work with the projector .
E-27 Changing Backgr ound Logo Y ou can change the default bac kground logo using the PC Card Files f eature. NOTE: File size must be 256KB or less. Other file formats than JPEG and BMP are not available.
E-28 AC IN RGB2 IN RGB OUT AUDIO AUDIO DVI IN USB ( MOUSE/HUB ) R E MO T E AUDIO AUDIO G/Y B/Cb H V RGB1 IN S -VID E O IN V ID E O IN AUDIO AUDIO AUDIO L/MONO R L/M ONO R AUDIO OUT L/MONO R PC CONTROL.
E-29 Operating the Viewer Function fr om the Projector (playback) This section describes the operation f or showing slides of presentation documents created using the Viewer function with the projector . It is also possible to mak e slides directly from the images projected with the projector .
E-30 NOTE: Y ou can also use the and button on the remote control to select folders or slides. If you use the and button on the remote control for Viewer operation, press the PJ button to switch to the Projector mode and the PJ button lights red.
E-31 Deleting Captured Images Using the Delete button on the tool bar f or Vie wer can delete captured images. T o delete captured images: 1. Select Viewer and display a f older list of captured images. 2. Use button to select the Capture folder [Cap] in the right bottom of the screen.
E-32 USING ON-SCREEN MENU Basic Menu Operation Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced mo- tion video image is projected. 1. Press the MENU button on the remote control or projector cabinet to display the Basic , Advanced or Custom Menu.
E-33 Menu tree Brightness, Contrast, Color, Hue, Sharpness 4:3, Letterbox, Wide Screen, Crop / 4:3 Window, Letterbox, Wide Screen, 4:3 Fill Top, Bottom, Left, Right Horizontal, Vertical, Clock, Phase .
E-34 Advanced Menu Source Select Picture Sound Image Options Picture Management Projector Options Tools Help Factory Default 3D Reform Wall Color Correction Menu Setup Lamp Setting Screen Auto Functio.
E-35 Advanced Menu Source Select Picture Volume Image Options Picture Management Projector Options Tools Help Factory Default 3D Reform Wall Color Correction Menu Setup Lamp Setting Screen Auto Functi.
E-36 Menu windows or dialog bo xes typically ha ve the following elements: Title bar .............. Indicates the menu title. Highlight ............. Indicates the selected menu or item. Solid triangle ...... Indicates fur ther choices are av ailable.
E-37 Entering Alphanumeric Characters by Using the Menu Alphabet or numeric characters are used f or your IP address or projec- tor name. T o enter IP Address or projector name, use the software ke y- board. F or using the software keyboard, see page E-60.
E-38 Entry Edit Command Picture (not available for V iewer and LAN) Adjusting Brightness, Contrast, Color , Hue, and Sharpness Brightness ...... Adjusts the brightness lev el or the back raster inten- sity . Contrast ......... Adjusts the intensity of the image according to the incoming signal.
E-39 Masking Unwanted Area (Blanking) This feature allo ws you to mask any unwanted area of the screen image. Adjust the T op, Bottom, Left or Right b lanking with the SELECT or button. Adjusting P osition and Clock This allows y ou to manually adjust the image horizontally and verti- cally , and adjust Clock and Phase.
E-40 Selecting Gamma Correction Mode Use the or buttons to choose one mode from three options . Each mode is recommended for : Dynamic ......... For true color reproduction of natural tones Natural ........... Nor mal settings Black Detail ...
E-41 Using Adapting Color Correction [W all Color Correction] The correction mode select screen will be displa yed. * T o read the pre-adjustment settings. Choose a selection from User 1 – 4, highlight "OK" and press the ENTER b utton. 3. Use the SELECT button to highlight "Ex ecute" and then press the ENTER button.
E-42 6. Use the SELECT button to mo ve the y ellow box to select a color density . Moving the yello w box changes the color density of the selected por- tion in the palette. Mov e the yellow bo x so that a color on the white paper for W all Color Correction becomes close to a color of the projected image on the wall.
E-43 Menu Allows y ou to set preferences f or the on-screen menu. Press "OK" to sav e your changes for all the f eatures of P age 1 and Page 2. [P age1] Selecting Menu Language [Language]: Y ou can choose one of seven languages f or on-screen instructions.
E-44 Setup Enables you to set operating options . Press "OK" to save y our changes for all the f eatures of Page1, P age2, Page3, P age 4, Page 5 and P age 6. [P age 1] [P age 2] Selecting Projector Orientation [Orientation]: This reorients your image for y our type of projection.
E-45 [P age 3] Selecting Signal F or mat [Signal Select] RGB1/2: Allows y ou to choose "RGB" for an RGB source such as a computer , or "Component" f or a component video source such as a D VD player . Normally select "RGB/Component" and the projector automatically detects an either incoming signal.
E-46 [P age 6] Selecting Communication Speed [Communication Speed]: This feature sets the baud rate of the PC Control port (Mini DIN 8 Pin). It suppor ts data rates from 4800 to 38400 bps.
E-47 Selecting Auto Functions F ocus: When A uto Focus is enabled in the A uto Functions menu, Auto F o- cus can be ex ecuted by pressing and holding the A UTO ADJUST or A UTO ADJ b utton for a minimum of 2 seconds.
E-48 Setting LAN Mode This feature allo ws you to set various setting items when the projector is used on your network. Consult with your network administr ator about these settings. NOTE: • A LAN card is required for LAN connection; NEC's optional wireless LAN card is available.
E-49 WEP (for Wireless only) Select this option whether using the WEP (Wired Equivalent Privacy) ke y for encryption or not. T o use encryption, specify WEP k ey . Disab le ........... Will not tur n on the encryption feature. Y our commu- nications may be monitored b y someone.
E-50 Status Displays the status of the LAN settings . IP Address ..... Indicates the IP address of the projector . Subnet Mask .. Indicates the subnet mask of the projector . MAC Address . Indicates the MAC address of the LAN card. Setting a Passwor d A pass word can be set for your projector to a void operation b y an unau- thorized person.
E-51 Enable/Disab le .............. This tur ns the Secur ity function on or off . K eyword ........................ Enter an appropriate keyword when y ou use the Security function. (Up to 10 characters can be used.) The Security function is availab le only when your ke yword is entered.
E-52 T ools Provides tools f or setting sleep timer , captur ing images, displa ying files or changing y our background logo in a PC Card and dr awing. NOTE: The "Capture" and "PC Card Files" features are required for a PC card. Using Sleep Timer 1.
E-53 MAINTENANCE This section describes the simple maintenance procedures you should f ollow to replace the lamp and the filter, and to clean the filter , the cabi- net and the lens.
E-54 1. T ur n off the projector bef ore cleaning. 2. Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild detergent. Nev er use strong detergents or solvents such as alcohol or thinner . 3. Use a blow er or lens paper to clean the lens, and be careful not to scratch or mar the lens.
E-55 TROUBLESHOOTING This section helps you resolv e problems you ma y encounter while setting up or using the projector . Power Indicator Indicator Condition Projector Condition Note Off Blinking light Steady light Green blinking Green blinking Orange blinking 0.
E-56 Does not turn on No picture Image isn’t square to the screen Picture is blurred Image is scrolling verti- cally , horizontally or both Remote control does not work Indicator is lit or blink- in.
E-57 SPECIFICA TIONS This section provides technical inf or mation about the MT1065/MT1060 Projector's performance Model Number MT1065/MT1060 Optical LCD P anel MT1065: 1.
E-58 APPENDIX Cabinet Dimensions Unit = mm (inch) Mini D-Sub 15 Pin Connector Pin Assignments of D-Sub RGB Input Connector Pin No. RGB Signal (Analog) YCbCr Signal 1 Red Cr 2 Green or Sync on Green Y .
E-59 Compatible Input Signal List Signal Resolution F requency H. Refresh Rate ( Dots ) ( kHz ) ( Hz ) NTSC – 15.734 60 P AL – 15.625 50 SECAM – 15.625 50 VESA 640 ⳯ 480 31.47 59.94 IBM 640 ⳯ 480 31.47 60 MAC 640 ⳯ 480 31.47 60 MAC 640 ⳯ 480 34.
E-60 15 24 3 67 9 8 Cable Connection Communication Protocol Baud rate ............................. 38400 bps Data length .......................... 8 bits Parity .................................... No parity Stop bit ................................
E-61 Operation Using an HTTP Browser Overview The use of HTTP server functions will allow control of the projector from a web browser without the installation of special softw are. Please be sure to use “Microsoft Internet Explorer 4.x” or a higher version f or the web browser .
E-62 T ravelCare Guide T ravelCare - a service for international travelers This product is eligible f or "T rav elCare", NEC's unique inter national war- ranty . Please note that T rav elCare cover age differs in part from coverage un- der the warr anty included with the product.
E-63 In Asia and Middle East NEC Viewtechnology , Ltd. Address: 686-1, Nishioi, Oi-Machi, Ashigarakami-Gun, Kanagaw a 258-0017, Japan T elephone: +81 465 85 2369 F ax Line: +81 465 85 2393 Email Address: support_pjweb@nevt.nec.co .jp WEB Address: http://www .
E-64 T O: NEC or NEC's A uthorized Service Station: FM: (Company & Name with signature) Dear Sir (s), I would lik e to apply your T rav elCare Ser vice Program based on attached registration .
E-65 Condition of your T ravelCare Service Program Enduser is requested to understand f ollowing condition of T ra velCare Service Program and fill necessary information into the application sheet. 1. Ser vice Options: There are 3 types of "Service" availab le.
Printed in Japan 7N8P1912.
Ein wichtiger Punkt beim Kauf des Geräts NEC MT1060 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NEC MT1060 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NEC MT1060 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NEC MT1060 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NEC MT1060 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NEC MT1060 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NEC MT1060 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NEC MT1060. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NEC MT1060 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
