Benutzeranleitung / Produktwartung LCD5710 des Produzenten NEC
Zur Seite of 38
User ’ s Manual MultiSync LCD5710 57" LCD Colour Monitor This monitor is designed to operate in landscape orientation only . Do not use in portrait orientation. Using the monitor in portrait position can cause damage to the display and will void the warranty of the product.
Index Declaration of conformity ...................................................................................................... ....................... English-1 Important Information ............................................................
English-1 English DECLARA TION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
English-2 Declaration Declaration of the Manufacturer We hereby certify that the colour monitor MultiSync LCD5710 (L576RX) is in compliance with Council Directive 73/23/EEC: – EN 60950-1 Council Directive 89/336/EEC: – EN 55022 – EN 61000-3-2 – EN 61000-3-3 – EN 55024 and marked with NEC Display Solutions, Ltd.
English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MUL TISYNC LCD5710 LCD COLOUR MONITOR: • DO NOT OPEN THE MONITOR . There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
English-4 Contents Power Cord User ’s Manual V ideo Signal Cable (D-SUB to D-SUB Cable) Wireless Remote Control and AA Batteries Clamper x 3 Y our new MultiSync LCD5710 monitor box* should contain t.
English-5 English 8 1 2 3 4 5 6 7 EXIT MUTE INPUT 10 EXIT MUTE INPU T 9 7 DOWN ( ) button Activates the OSM menu when the OSM menu is turned-off. Acts as button to move the highlighted area down to select the adjustment with OSM menu. 8 EXIT button Activates the OSM menu when the OSM menu is turned-off.
English-6 T erminal Panel 7 AUDIO IN 1, 2, 3 To input audio signal from external equipment such as a computer , VCR or DVD player . 8 AUDIO OUT To output the audio signal from the AUDIO IN 1, 2 and 3 jack. 9 VIDEO INPUT/OUTPUT Connector VIDEO IN connector (BNC and RCA): To input a composite video signal.
English-7 English 1 POWER button Switches the power on/off. * If Power Indicator is not glowing, then no controls will work. 2 INPUT button Selects from input signal, [RGB1], [RGB2], [RGB3], [DVD/HD], [VIDEO] or [VIDEO<S>].
English-8 Point the top of the remote control toward the LCD monitor ’s remote sensor during button operation. Use the remote control within a distance of about 7 m/23 ft. from the front of the LCD monitor ’s remote control sensor and at a horizontal and vertical angle of within 30° within a distance of about 3 m/10 ft.
English-9 English 1. Determine the installation location CAUTION: DO NOT A TTEMPT T O INST ALL THE LCD MONITOR BY YOURSELF . Installing your LCD display must be done by a qualified technician. Contact your dealer for more information. CAUTION: MOVING OR INST ALLING THE LCD MONIT OR MUST BE DONE BY TWO OR MORE PEOPLE.
English-10 9. Adjust the image (See pages 20-28) Make adjustments when picture adjustment such as the brightness or contrast is required. 10. Recommended Adjustment To reduce the risk of “image persistence”, please adjust the following items based on the application being used.
English-11 English 4. T o avoid falling down Fasten the LCD monitor to wall using a cord or chain, which is sufficient to support the weight of the LCD monitor (approx. 63.0kg). The wall must be strong enough to support the monitor and mounting accessories.
English-12 Mounting Position of Ferrite Core Ferrite Core To connector of PC To AUDIO 1 of monitor Attaching the Ferrite Core Attach the Ferrite Core to PC Audio Cable. Use of the cable without mounting the ferrite core will result in the occurrence of noise.
English-13 English Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer ’s screen image. Some video cards and pixel clock over 165MHz may not display an image correctly . Y our LCD monitor displays proper image adjusting the factory preset timing signal automatically .
English-14 Connecting your Macintosh computer to your LCD monitor will enable you to display your computer ’s screen image. Some video cards or drivers may not display images correctly .
English-15 English LCD monitor Equipment with a digital interface such as a personal computer with RGB output (TMDS) DVI-D connector DVI-D connector To DVI output To audio output Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard.
English-16 Connecting your DVD player to your LCD monitor will enable you to display DVD video. Refer to your DVD player user ’s manual for more information. Connect the LCD Monitor to a DVD Player •T o connect the DVD/HD IN connector (BNC) on the LCD monitor , use a separately available BNC connector cable.
English-17 English Y ou can connect your stereo amplifier to your LCD monitor . Refer to your amplifier owner ’s manual for more information. Connect the LCD Monitor to a Stereo Amplifier •T urn on the LCD monitor and the amplifier only after all connections have been made.
English-18 Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on, or red when in off mode. The monitor can be powered on or off using the following three options: 1. Pressing the power button. Note: Before pressing the power button, be sure to turn on the Main Power Switch on the LCD monitor .
English-19 English Power Indicator Using Power Management The LCD monitor follows the VESA approved DPM Power Management function. The power management function is an energy saving function that automatically reduces the power consumption of the display when the keyboard or the mouse has not been used for a fixed period.
English-20 MAIN MENU PICTURE SCREEN AUDIO PIP CONFIGURA TION 1 CONFIGURA TION 2 ADV ANCED OPTION :SEL SET :NEXT :RETURN MENU :EXIT MENU PICTURE BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL COLOR CONTROL .
English-21 English Adjust the tint of the screen. Press + button to Skin colour becomes greenish. Press - button to Skin colour becomes purplish. Adjust the colour depth of the screen. Press + button to increase colour depth. Press - button to decrease colour depth.
English-22 Adjusts the vertical size by increasing or decreasing the setting. Press + button to expand the height of the image on the screen. Press - button to narrow the height of the image on the screen. Selects the screen zoom mode. Zoom mode will be selected when you select the “ZOOM” by pushing the “SIZE” button on remote controller .
English-23 English Main-Menu PICTURE IN PICTURE Sub-Menu Selecting the size of picture inserted at the “Picture-in-Picture” (PIP) mode. “Large”, “Middle” and “Small” are available.
English-24 Select “SCREEN SA VER” functions to reduce the risk of the “image persistence”. GAMMA: The display gamma is changed and fixed when selected “ON”. COOLING F AN: The built in cooling fan is always on when set “ON”. BRIGHTNESS: The brightness is decreased when selected “ON”.
English-25 English To compensate for image degradation, which is caused by using a long cable. RED/GREEN/BLUE DELA Y To adjust the each phase of RED, GREEN and BLUE signal. LEVEL: 0 - 6 RED/GREEN/BLUE SHARPNESS To adjust the each performance degradation of RED, GREEN and BLUE signal.
English-26 Selects the method of input detection when more than two computers are connected. FIRST DETECT : When the current video input signal is not present, then the monitor searches for a video signal from the other video input port.
English-27 English Selects the image flipping or rotation. NORMAL: Normal display . H MIRROR: Mirror image for horizontal direction. V MIRROR: Mirror image for vertical direction. ROT A TE: Rotate the image 180 degrees. Changes the display area of the image.
English-28 Information of status for COOLING F AN, BRIGHTNESS and TEMPERA TURE. COOLING F AN comes to run when inside temperature is over a guaranteed limit. BRIGHTNESS comes to be decreased when inside temperature is over guaranteed limit with cooling fun.
English-29 English 3. Reducing the environmental temperature is effective for long life use. When Protection board (glass, acryl) is installed over the LCD surface, enclosed into the box / wall, or stack the monitor , please utilize the temperature sensors inside monitor .
English-30 Controlling the LCD monitor via RS-232C Remote Control This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.
English-31 English 3) Control sequence (1) The command from a computer to the LCD monitor will be sent in 400ms. (2) The LCD monitor will send a return command 400ms* after it has received and encoded. If the command isn’t received correctly , the LCD monitor will not send the return command.
English-32 Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. Colour Control Systems: Allows you to adjust the colours on your screen and customize the colour accuracy of your monitor to a variety of standards.
English-33 English T roubleshooting No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position.
English-34 Specifications Product Specifications Analog Input Digital Input LCD Module 57" /145.0cm diagonal Pixel Pitch: 0.6525mm Resolution: 1920 x 1080 dots Colour: Over 16 million colours (depending on video card used) Brightness: 450cd/m 2 (T yp.
English-35 English Mounting on W all or Ceiling DO NOT mount the monitor yourself. Please ask dealer . For proper installation it is strongly recommended you use a trained, qualified technician. Please inspect the location where the unit is to be mounted.
English-36 Pin Assignment 1) Analog RGB input (MiniDsub15p): R G B 2 Pin No Name 1 Video Signal Red 2 Video Signal Green 3 Video Signal Blue 4 GND 5 DDC-GND 6 Red-GND 7 Green-GND 8 Blue-GND 9 +5V (DDC.
Ein wichtiger Punkt beim Kauf des Geräts NEC LCD5710 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NEC LCD5710 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NEC LCD5710 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NEC LCD5710 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NEC LCD5710 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NEC LCD5710 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NEC LCD5710 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NEC LCD5710. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NEC LCD5710 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
