Benutzeranleitung / Produktwartung LCD1810X des Produzenten NEC
Zur Seite of 39
MultiSync LCD 1810X User’s Manual CN912B-2/LCD1810X/78135322 00.5.26, 0:03 PM 1.
CN912B-2/LCD1810X/78135322 00.5.26, 0:03 PM 2.
We hereby certify that the colour monitors MultiSync LCD 1810X (LH-18S01) MultiSync LCD 1810X (LH-18S01-BK) are in compliance with Council Directive 73/23/EEC: - EN 60950 Council Directive 89/336/EEC: - EN 55022 - EN 61000-3-2 - EN 61000-3-3 - EN 55024 and marked with NEC Home Electronics, LTD.
Safety Instruction Caution: When operating the LH-18S01/LH-18S01-BK with a 220-240V AC power source in Europe except UK, use the power cord provided with the monitor. In UK, a BS approved power cord with moulded plug has a Black (five Amps) fuse installed for use with this equipment.
For the Customer to use in U.S.A or Canada. Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouiller du Canada.
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna.
TCO'95 LH-18S01-BK Congratulations! You have just purchased a TCO'95 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also, to the further development of environmentally adapted electronics products.
computers. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Naturskyddsforeningen (The Swedish Society for Nature Conservation) and NUTEK (The National Board for Industrial and Technical Development in Sweden).
TCO'95 is a co-operative project between TCO (The Swedish Confederation of Professional Employees), Naturskyddsforeningen (The Swedish Society for Nature Conservation) and NUTEK (The National Board for Industrial and Technical Development in Sweden).
Mercury** Mercury is sometimes found in batteries, relays and switches. Mercury damages the nervous system and is toxic in high doses. TCO'95 requirement states that batteries may not contain more than 25 ppm (parts per million) of mercury.
TCO'99 LH-18S01 Congratulations! You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration). Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric and magnetic fields, energy consumption and electrical and fire safety.
Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances.
CFCs (freons) The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used during the manufacture and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards.
CN912B-2/LCD1810X/78135322 00.5.26, 0:03 PM 15.
Appendix Español Français Deutsch English Italiano Introduction to the NEC MultiSync LCD 1810X Congratulations on your purchase of the NEC MultiSync LCD 1810X true colour monitor! ambix Technology D.
Appendix Español Français Deutsch English Italiano Introduction to the NEC MultiSync LCD 1810X E - 2 P&D Plug and Display - The VESA standard for digital flat panel monitor interfaces. It is more robust than DFP since it allows for other options through a single connector (options like USB, analog video and IEEE- 1394- 995).
Appendix Español Français Deutsch English Italiano E - 3 Introduction to the NEC MultiSync LCD 1810X Pivoting Stand Allows users to adjust the monitor to the orientation that best fits their application, either Landscape orientation for wide documents, or portrait orientation for the ability to preview a full page on one screen at one time.
Appendix Español Français Deutsch English Italiano Contents of Package Your new MultiSync LCD monitor box should contain the following: Contents of Package E - 4 – NEC MultiSync LCD 1810X (Model L.
Appendix Español Français Deutsch English Italiano Recommended Use Safety Precautions and Maintenance For optimum performance, please note the following when setting up and using the MultiSync LCD colour monitor: • DO NOT OPEN THE MONITOR.
Appendix Español Français Deutsch English Italiano Recommended Use E - 6 • Handle with care when transporting. Save packaging for trans- porting. • The inside of the fluorescent tube located within the LCD moni- tor contains mercury. Please follow the bylaws or rules of your local municipality to dispose of this tube properly.
Appendix Español Français Deutsch English Italiano E - 7 Recommended Use CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up.
Appendix Español Français Deutsch English Italiano Installation Connection to your Personal Computer The MultiSync LCD 1810X true colour monitor complements PC compatible computers. Your system has one of two configurations: – the video controller is built into the computer.
Appendix Español Français Deutsch English Italiano E - 9 Installation NOTE: Some Macintosh systems do not require a Macintosh cable adapter. 3. Remove connector cover. Connect the DVI signal cable to the connector on the back of the monitor. Connect the 15-pin mini D-SUB signal cable (not included) to the connector on the back of the monitor.
Appendix Español Français Deutsch English Italiano Installation E - 10 Figure B.1 Macintosh Cable Adapter (not included) Figure A.1 Figure A.2 Figure A.
Appendix Español Français Deutsch English Italiano E - 11 Installation FigureD.1 DVI Figure F.1 Power Cord Figure E.1 Connector Cover Mini D-SUB FigureC.
Appendix Español Français Deutsch English Italiano Installation E - 12 Raise and Lower Monitor Screen The monitor may be raised or lowered in either Portrait or Landscape mode. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.
Appendix Español Français Deutsch English Italiano E - 13 Installation Figure R.1 Fi g ure TS.1 Figure RL.1 CN912B-2/LCD1810X/78135322 00.5.26, 0:03 PM 28.
Appendix Español Français Deutsch English Italiano Installation E - 14 Return the stand to its original position, remove the 4 screws that connect the monitor to the stand, and lift off the stand assembly. (Figure S.4) 5. Reverse this process to reattach stand.
Appendix Español Français Deutsch English Italiano EXIT CONTROL PROCEED RESET OSM MUTE DVI / D-SUB E - 15 Controls OSM Controls To access OSM menu, press any of the control buttons ( , , , ) or the PROCEED button. To mute sound function, press the EXIT button.
Appendix Español Français Deutsch English Italiano Brightness/Contrast Controls BRIGHTNESS Adjusts the overall image and background screen brightness. CONTRAST Adjusts the image brightness in relation to the background. AUTO ADJUST CONTRAST (Analog input only) Adjusts the image displayed for non-standard video inputs.
Appendix Español Français Deutsch English Italiano Colour Control System Five colour presets select the desired colour setting. Each colour setting is adjusted at the factory. R,G,B: Increases or decreases Red, Green or Blue colour depending upon which is selected.
Appendix Español Français Deutsch English Italiano VIDEO DETECT Selects the method of video detection when two computers are connected. NONE The monitor will not switch the video inputs automatically, only by user control. FIRST DETECT The video input has to be switched to “ FIRST DETECT ” mode.
Appendix Español Français Deutsch English Italiano Tools 2 LANGUAGE OSM control menus are available in seven languages. OSM POSITION You can choose where you would like the OSM control im- age to appear on your screen. Selecting OSM Location al- lows you to manually adjust the position of the OSM con- trol menu left, right, up or down.
Appendix Español Français Deutsch English Italiano Controls E - 20 Information DISPLAY MODE Provides information about the current resolution display and technical data including the preset timing being used and the horizontal and vertical frequencies.
Appendix Español Français Deutsch English Italiano E - 21 Specifications Specifications MultiSync LCD 1810X Display 46 cm (18.1 inch) viewable image size; 1280 x 1024 native resolution (Pixel Count); active matrix; thin film transistor (TFT); liquid crystal display (LCD); 0.
Appendix Español Français Deutsch English Italiano Specifications E - 22 Active Display Landscape Horizontal 359 mm Area* 4 Vertical 287 mm Portrait Horizontal 287 mm Vertical 359 mm Power supply AC 100-120 V / 220-240 V 50/60 Hz Current Rating 0.6 A @ 100-120 V / 0.
Appendix Español Français Deutsch English Italiano E - 23 Troubleshooting/Support Troubleshooting/Support Problem Check These Items No picture - The signal cable should be completely connected to the display card/computer. - The display card should be completely seated in its slot.
Appendix Español Français Deutsch English Italiano Troubleshooting/Support E - 24 Problem Cheak These Items Image is unstable, - Signal cable should be completely attached to the unfocused or computer. swimming is - Use the OSM Image Adjust controls to focus and apparent adjust display by increasing or decreasing the Fine Control.
Ein wichtiger Punkt beim Kauf des Geräts NEC LCD1810X (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NEC LCD1810X noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NEC LCD1810X - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NEC LCD1810X reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NEC LCD1810X erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NEC LCD1810X besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NEC LCD1810X verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NEC LCD1810X. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NEC LCD1810X gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
