Benutzeranleitung / Produktwartung 42PD2, 50PD1 des Produzenten NEC
Zur Seite of 64
NEC T echnologies PlasmaSync Plasma Monitor User’ s Man ual.
2 Impor tant Infor mation W arnings and Safety Precaution The NEC plasma monitor is designed and manuf ac- tured to pro vide long, trouble-free service. No main- tenance other than cleaning is required. Use a soft dry cloth to clean the panel. Ne ver use solv ents such as alcohol or thinner to clean the panel surf ace.
3 T o av oid damage and prolong operating lif e: 1. Use only with 120V 50/60Hz AC po wer supply . Con- tinued operation at line voltages greater than 120 V olts A C will shorten the life of the unit, and might ev en cause a fir e hazard. 2. Handle the unit carefully when installing it and do not drop.
4 Mises en garde et précautions de sécurité Le moniteur PlasmaSync NEC a été conçu et f abr iqué pour une utilisation fiab le et durab le. Il ne nécessite aucun entretien en dehors du netto yage. Utiliser un chiff on doux et sec pour nettoy er la surf ace de l'écran.
5 P our éviter des dommages et prolonger la durée de ser vice de l’appareil: 1. N’utiliser qu’une source d’alimentation de 120 V 50/ 60 Hz CA. Le fait d’utiliser l’appareil en continu à des tensions de ligne supérieures à 120 V olts CA réduit sa durée de vie et risque de prov oquer un incendie.
6 NEC T echnologies, Inc. (hereinafter NECTECH) warrants this product to be free from defects in material and work- manship under the following terms and, subject to the con- ditions set forth belo w , a grees to repair or replace (at NECTECH's sole option) any part of the enclosed unit which prov es defective.
7 Contents How to Attacch Options to the Plasma Monitor ............................................................................................. 8 Introduction Introduction to the PlasmaSync 42PD2/50PD1 ...........................................
8 How to Attach Options to the Plasma Monitor Drawing A Drawing B 45 mm (1.77") 50 mm (1.97") 50 mm (1.97") 31 mm (1.22") 31 mm (1.22") Wall V entilation Requirements for en- closure mounting To allow heat to disperse, leave space between surround- ing objects as shown in the diagram to the right.
9 Introduction Contents of the Package The following lists all of the items included in your Plasma Sync monitor package. Please save the original box and packing materials for future transportation or shipment of this monitor. 1. PlasmaSync 42PD2/50PD1 2.
10 1. Determine the installation location * T o ensure safe use, see “Before Use” and “Observ e the Follo wing, ” then install properly . 2. Connect the equipment Set the termination switch (75 Ω /high impedance). Set the DIP switches to suit the application and system structure.
11 Opening the Terminal Board Cover Slide the knob and at the same time lift the cover. Knob Removing the Terminal Board Cover This unit’s terminal board cover can be removed. First, open the cover and then: 1. Pull the top hook in the direction of the arrow.
12 Par t Names and Functions Front View 1 PO WER/ST ANDBY The lamp color indicates the mode of po wer on/standby or power manag ement. 2 Remote control sensor Receiv es the signal from the remote control (when using the wireless remote control). 3 VIDEO button Switches to the signal connected with the VIDEO input connector .
13 Side View .... T erminal Board L/R 10 11 12 13 AC-IN OUT IN RGB1 HIGH 75 Ω RGB2 VIDEO G B H/CS V R S-VIDEO 10 DIP SW Sets the v arious modes of this unit. 11 RGB3 (D VI 29pin) IN connector: Inputs a digital RGB signal. (TMDS) Note: This connector does not support analog input.
14 POWER ON POWER OFF RGB 1 RGB 2 POSITION / CONTR OL RGB 3 EXIT PROCEED VIDEO CONTRAST RGB/VIDEO BRIGHT COLOR VIDEO TINT SHARPNESS VISUAL NORMAL RASTER NORMAL ID SELECT CLEAR 1 1 PO WER ON/OFF button: Switches the power on/of f. (If the PO WER/ST ANDBY let is not glo wing, then these controls will not work.
15 1. Press and open the cover. 2. Align the batteries according to the (+) and (-) indications inside the case. 3. Replace the cover. Battery Installation and Replacement The remote control is powered by two 1.5V AAA batteries. 11 SHARPNESS: Adjusts the fine screen quality of the video scr een.
16 Using the wired remote control mode Connect the included remote control cable to the remote control's remote jack and "REMO TE IN" jack on the monitor . When the cable is connected, the mode automatically switches to wired remote control.
17 Setting details On-off s witching of on-screen displa y (OSM) On-off s witching of wireless remote control Setting when shipped On On Switch position ON ON OFF OFF Sync control mode A utomatic selection PIn No . 1 2 3 4 A utomatic Manual 1 (Composite) Manual 2 (Sync-on-g reen) No .
18 P ower Management Function The power management function is an ener gy sa ving function that automatically reduces the po wer consumption of the display when the keyboard or the mouse ha ve not been used for a f ixed period.
19 Installation Wiring Diagram AC-IN OUT IN RGB1 HIGH 75 Ω RGB2 VIDEO G B H/CS V R S-VIDEO EXTERNAL CONTROL Plasma monitor IBM XGA/SuperVGA/VGA or Compatibles or Macintosh G3 series Ma.
20 Connecting Your PC or Macintosh Computer Connecting your PC or Macintosh computer to your plasma monitor will enable you to display your computer's screen image.
21 Daisy-chaining Your monitors The REMOTE IN/OUT terminals allow you to control multiple monitors using one remote control. 1. Connect the REMOTE OUT of the monitor to the RE- MOTE IN of the next monitor using the optional re- mote cable. When using the VIDEO inputs: THROUGH OUT Connections 1.
22 Power The main unit enters the standby mode when the AC cable is plugged in. This section describes how to select a computer or video source and how to adjust the picture. General Controls Before you turn on your plasma monitor ensure that the computer or video source is turned on.
23 POSITION / CONTROL Adjustment of the Display (Direct) Press the buttons of the remote control to make direct adjustments and settings. A pr ess of the desired button will show the adjustment display . The adjustment condition is stored in memory ev en after the po wer is s witched of f.
24 Adjustment of the Image Press the button to sho w the adjustment display . The display will go off about 3 seconds after your f inger is released from the button.
25 Adjustment of the Display (Menu Control) Use of the on-screen display (OSM) function allo ws the setting of v arious fine adjustments to be made. The adjustment details will be stored ev en when the power is switched of f.
26 Display Mode Displa y mode displa y Displa y source (VIDEO/RGB1,2,3) Horizontal frequency (kHz) V er tical frequency (Hz) P olar ity of horizontal sync Neg./P os. (Negative polarity/P ositive polarity) P olar ity of vertical sync Neg./P os. (Negative polarity/P ositive polarity) Source Info: H-F req.
27 BRIGHTNESS CONTRAST SHARPNESS COLOR TINT GAMMA:2 Before Making Adjustments... Adjust using the r emote control b uttons. PR OCEED button Press to display the main menu. Press in the main menu to display the sub menu. EXIT button Press in the main menu to turn of f the display and exit.
28 T o Reset the Adjustment V alue to the Factor y Default Setting 1. Pr ess the VISU AL NORMAL button or RASTER NORMAL button. The verif ication sub menu is displayed. VISU AL NORMAL PROCEED A utomatic Storage The settings values are stored automatically once the PROCEED button is pressed.
29 Adjustment of the Image (Visual Controls) These controls adjust the brightness, contrast, color , tint, and sharpness. 1. Align the cursor with icon (1). Visual control screen Icon (1) The cursor is mov ed left and r ight with the POSITION CONTR OL § / © buttons.
30 * T o reset the adjustment value, press the RASTER NORMAL button bef ore pressing the EXIT button. * T o delete the main menu, press the EXIT button once more. * H-POSITION 1,2 and V-POSITION 1,2 are not available at the time of RGB input when AUTO PIC- TURE is turned on.
31 * T o reset the adjustment value, press the RASTER NORMAL button before pressing the EXIT b utton. * T o delete the main menu, press the EXIT button once more. * H-POSITION 1,2 and V-POSITION 1,2 are not available at the time of RGB input when AUTO PIC- TURE is turned on.
32 * T o reset the adjustment value, press the VISUAL NORMAL button bef ore pressing the EXIT button. * T o delete the main menu, press the EXIT button once more. Color T emperature (COLOR TEMP) This adjusts the color temperature. 1. Align the cursor with icon (4) Color temperature adjustment screen Icon (4) 2.
33 * T o reset the adjustment value, press the VISUAL NORMAL button bef ore pressing the EXIT button. * T o delete the main menu, press the EXIT button once more. Adjustment of the White Balance This adjusts the white balance of bright images (Gain) and dark images (Bias).
34 OSM adjustment screen * The change will be stored when the menu is deleted. T o reset the adjustment value, press the RASTER NORMAL button bef ore pressing the EXIT button. * T o adjust another item, press the EXIT b utton. Adjustment of the On-screen Display P osition 1.
35 Setting the On-screen Displa y OFF Time While using the on-screen display (OSM), the OFF time setting functions to automatically turn off the on-screen display when there is no input.
36 Adjustment of the Clock Frequenc y/Cloc k Phase (A UTO PICTURE) When A UTO PICTURE is set to ON, normally the clock frequency adjustment and the clock phase adjustment are not necessary , b ut this adjustment should be made when the automatic adjustment cannot be made correctly .
37 * Clock phase adjustment (Fine Picture) Adjust the phase of the clock and adjust the (+) and (-) b uttons so that screen noise, flicker , and color infidelity are minimized. First adjust the clock frequency , then perform the clock phase adjustment.
38 EXIT 3. Return to the main menu * T o delete the main menu, press the EXIT button once more. Next P age Screen 1. Moving the cursor to the next page icon (8) at the right edge of the screen will mo ve the display to the second page. The cursor is mov ed left and right with the POSITION CONTR OL § / © b uttons.
39 Information Screen This permits a check on-screen of the resolution and data of the signal that is currently being input. 1. Align the cursor with icon (10) on the second page of the main menu and display the display mode. * When video input is selected SOURCE: VIDEO MODE: NTSC, P AL, SECAM Note: NTSCis pr ocessed as 4.
40 3. Align the cursor with SET and press PR OCEED * When the timer has been set, the LED will flash orange ev ery 3 seconds during remote control standby . Timer Screen This sets the date and time. 1. Align the cursor with icon (11) of the second page.
41 A uto Timer Screen Used to turn the power ON/OFF, change inputs or enter the invert mode. 1. Align the cursor with icon (11) of the second page of the OSM. The cursor is mov ed left and r ight with the POSITION CONTR OL § / © buttons. Icon (11) 2.
42 9. Use the ▲ / ▼ bottons to select MODE and set to VIDEO, RGB1, RGB2, RGB3, INV or WT with the § / © buttons. POSITION / CONTROL DOWN Cursor movement UP Cursor movement * The left and right buttons change the follo wing input modes: VIDEO, RGB1 through RGB3, INV , WT .
43 Multiple Screens Select the screen mode from among 1 or 4 screens. (Normally 1 is selected.) VIDEO WALL can be achieved from two or four screens with the sole use of the main unit. For information about compatible signals, see the Signal Preset Table of factory setting values on Page 49.
44 Other Setting Screens (1) This allows the f ollowing settings: WIDE MODE, COLOR SYSTEM, RGB MODE, PO WER ON MODE, POWER MAN AGER, EXTERN AL CONTROL, HDTV SELECT , and ALL RESET . 1. Align the cursor with icon (13) of the second page. The cursor is mov ed left and r ight with the POSITION CONTR OL § / © buttons.
45 Other Setting Screens (2) This allo ws the follo wing settings: LONG LIFE MODE 1/ 2/3 GRA Y LEVEL, SET ID NO, and ALL RESET . 1. Align the cursor with icon (14) of the second page. Icon (14) The cursor is mov ed left and r ight with the POSITION CONTR OL § / © buttons.
46 Set Selection Screen f or Allotting ID Numbers to Multiple Screens/Each Set This sets the VIDEO W ALL NO. and SET ID NO. ID Selection Screen 2. Align the cursor with the desired item ID SELECT POSITION / CONTROL Move up Move down ID Selection Screen 4.
47 • Is a connected component set directly in front or at the side of the display? • Is the monitor’ s power cord plugged into a pow er outlet? • Are all the monitor’ s indica tors of f? •.
48 Specifications Plasma Screen 42 inch Visual size (Diagonal), AC Drive type Aspect ratio : 16:9 Optical filter coating Display color : 16,770,000 colors 256 levels RGB Input Terminals RGB 1 : mini D-SUB 15pin RGB 2 : BNC (R,G,B, H/CS and V) RGB 3 : Digital RGB (DVI 24+5pin: Not compatible with analog input.
49 Plasma Screen 50 inch Visual size (Diagonal), AC Drive type Aspect ratio : 16:9 Optical filter coating Display color : 16,770,000 colors 256 levels RGB Input Terminals RGB 1 : mini D-SUB 15pin RGB 2 : BNC (R,G,B, H/CS and V) RGB 3 : Digital RGB (DVI 24+5pin: Not compatible with analog input.
50 Appendix Signal Identification For Raster Preset VIDEO NTSC*1 VIDEO PAL*1 VIDEO SECAM*1 640 X 240 (15.734kHz/59.94Hz) 768 X 288 (15.557kHz/50.39Hz) 640 X 400 (31.469kHz/70.086Hz) 640 X 480 (31.469kHz/59.94Hz) 640 X 480 (35kHz/66.667Hz) 640 X 480 (37.
51 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Signal (Analog) Red Green or sync-on-green Blue Ground Ground Red ground Green ground Blue ground No connection Sync signal ground Ground Bi-directional DATA (SDA) Horizontal or composite sync Vertical sync Data clock 1 2 3 4 5 11 12 13 14 15 6 7 8 9 10 Signal lev el VIDEO signal : 0.
52 1 2 3 4 5 11 12 13 14 15 6 7 8 9 10 EXTERNAL CONTROL Pin No. 1 to 3 4 5 and 14 6 to 8 9 and 10 11 12 13 15 Function Not used Power ON/OFF Open ON Established OFF Input switching The input mode is switched by the combination of pin num- bers 5 and 14.
53 8bit 8bit 8bit 8bit 8bit 8bit 8bit 8bit Command 1 UNIT ID 1 UNIT ID 2 Command 2 Data length Data Check Sum Command 1 Together with Command 2, this is a number that distin- guishes the various commands. For ACK, when bit 2 and bit 3 are both “1”, reception of a supported command or data is indicated.
54.
55.
56.
57.
58.
59.
60.
61.
62.
63 Cabinet dimensions PlasmaSync 42PD2 (Model PX-42VP2A) 39.3''(998) 23.4''(595) 17''(432) 1.4''(35.8) 1.4''(35.8) 19.85''(504.08) 4.5'' (114) 4.4'' (112) Unit : inch(mm) PlasmaSync 50PD1 (Model PX-50VP1A) 47.
NEC T echnologies, Inc. 1250 N. Arlington Heights Road, Suite 500 Itasca, Illinois 60143-1248 Printed in Japan 7S800091.
Ein wichtiger Punkt beim Kauf des Geräts NEC 42PD2, 50PD1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NEC 42PD2, 50PD1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NEC 42PD2, 50PD1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NEC 42PD2, 50PD1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NEC 42PD2, 50PD1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NEC 42PD2, 50PD1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NEC 42PD2, 50PD1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NEC 42PD2, 50PD1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NEC 42PD2, 50PD1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
