Benutzeranleitung / Produktwartung 42MP1 des Produzenten NEC
Zur Seite of 54
NEC T echnologies PlasmaSync Plasma Monitor User’ s Man ual.
Impor tant Information W arnings and Safety Pr ecaution The NEC plasma monitor is designed and manuf ac- tured to provide long, troub le-free service. No main- tenance other than cleaning is required. Use a soft dr y cloth to clean the panel. Nev er use solv ents such as alcohol or thinner to clean the panel surface.
To av oid damage and prolong operating life: 1. Use only with 120V 50/60Hz A C power supply . Con- tinued operation at line voltages greater than 120 V olts AC will shorten the life of the unit, and might ev en cause a fire hazard. 2. Handle the unit carefully when installing it and do not drop.
Mises en garde et précautions de sécurité Le moniteur PlasmaSync NEC a été conçu et f abr iqué pour une utilisation fiable et dur able. Il ne nécessite aucun entretien en dehors du netto yage. Utiliser un chiffon doux et sec pour netto y er la surface de l'écran.
P our é viter des dommages et prolonger la durée de ser vice de l’appareil: 1. N’utiliser qu’une source d’alimentation de 120 V 50/ 60 Hz CA. Le fait d’utiliser l’appareil en continu à des tensions de ligne supérieures à 120 V olts CA réduit sa durée de vie et risque de provoquer un incendie.
NEC T echnologies, Inc. (hereinafter NECTECH) warrants this product to be free from defects in material and work- manship under the following terms and, subject to the con- ditions set forth belo w , agrees to repair or replace (at NECTECH's sole option) any part of the enclosed unit which proves defective.
Contents How to Attach Options to the Plasma Monitor ......... 1 Introduction ..................................................... 2 Introduction to the PlasmaSync 42MP1 Plasma Monitor ....................................................... 2 The features you'll enjoy include: .
1 How to Attach Options to the Plasma Monitor Drawing A Drawing B 31 mm (1.22") 1110 mm (43.7") 748 mm (29.5") 31 mm (1.22") 50 mm (2") 50 mm (2") Wall Wall V entilation .
2 Introduction Introduction to the PlasmaSync 42MP1 Plasma Monitor NEC's PlasmaSync™ is a seamless blend of cutting-edge visual technology and sophisticated design. At 42-inches, with a 16:9 aspect ratio, the PlasmaSync 42MP1 certainly makes a big impression.
3 Par t Names and Function Front View INPUT SELECT VOLUME POWER/STANDBY PROCEED POWER/ST ANDBY DOWN LEFT/– RIGHT/+ UP V OLUME /EXIT INPUT SELECT 1 2 47 6 1 PR OCEED Sets the on-screen display (OSM) mode and displays the main menu. 2 V OLUME Down and Up Adjust the volume.
4 Rear View/ T erminal Board SPEAKERS MUST HAVE MORE THAN 7WATT RATING IMPEDANCE 6 OHM LEFT EXTERNAL CONTROL REMOTE CONTROL CONTROL LOCK ON/ OFF AC IN RIGHT RGB 3 (Digital RGB) RGB 1 R/CR/PR G/Y B/CB/.
5 Remote Controller 1 PO WER ON/OFF Switches power on/of f. (This does not operate when PO WER/ST AND BY indicator of the main unit is of f. 1 OFF POWER RGB/PC DVD/HD VIDEO EXIT POINTER ZOOM + – VOL.
6 C DISPLA Y Displays the source settings on the screen. D OFF TIMER Acti vates the of f timer for the unit. E Remote Jack Insert the plug of the supplied remote cable when using the supplied remote control unit in the wired condition. F Remote control signal transmitter T ransmits the remote control signals.
7 SPEAKERS MUST HAVE MORE THAN 7WATT RATING IMPEDANCE 6 OHM LEFT EXTERNAL CONTROL REMOTE CONTROL CONTROL LOCK ON/ OFF AC IN RIGHT REMOTE CONTROL EXTERNAL CONTROL CONTROL LOCK ON/ OFF Using the wired remote control mode Connect the included remote control cable to the remote control unit's "REMO TE CONTR OL" terminal.
8 RGB 3 (Digital RGB) RGB 1 R/C R /P R G/Y B/C B /P B HD VD L(MONO) R L(MONO) Y C B /P B C R /P R R L(MONO) AUDIO 3 AUDIO 2 AUDIO 1 RGB2/ DVD2/ HD2 DVD1/HD1 R VIDEO 1 VIDEO 2 VIDEO 3 Installation Docu.
9 Connecting Y our PC Or Macintosh Computer Connecting your PC or Macintosh computer to your plasma moni- tor will enable you to display your computer's screen image for an impressi ve presentation. The plasma monitor supports the signals described on page 44.
10 External Speaker Connections External speakers may be connected to the plasma monitor to reproduce sound from VIDEO, D VD or RGB signal sources. External speakers may be connected directly to the SPEAK- ERS terminals or indirectly by connecting a stereo system amplifier to the audio outputs.
11 Pin Assignments and Signal Levels for 15 pin RGB (Analog) 5 4 3 2 1 15 14 13 12 11 10 9 8 7 6 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Signal (Analog) Red Green or sync-on-green Blue No connecti.
12 Basic Operations POWER To turn the unit ON and OFF: 1. Plug the power cord into an acti ve AC po wer outlet. 2. Press the PO WER ON button (on the remote control- ler) to turn on. The monitor’ s PO WER/ST ANDBY indicator will light up(green) when the unit is on.
13 OFF TIMER To set the off timer: The off timer can be set to turn the po wer of f after 30, 60, 90 or 120 minutes. 1. Press the OFF TIMER b utton to start the timer at 30 minutes. 2. Press the OFF TIMER b utton to the desired time. 3. The timer starts when the menu turns of f.
14 W atching with a wide screen (manual) W ith this function, you can select one of four screen sizes. When watching videos or digital video discs 1. Press the "WIDE" button on the remote controller . 2. W ithin 3 seconds ... Press the "WIDE" button ag ain.
15 W atching computer images with a wide screen Switch to the wide screen mode to expand the 4 : 3 image to fill the entire screen. 1. Press the "WIDE" button on the remote controller . 2. W ithin 3 seconds ... Press the "WIDE" button ag ain.
16 The following describes ho w to use the menus and the se- lected items. 1. Press the PR OCEED button on the remote controller to display the MAIN MENU. 2. Press the cursor buttons ▲ ▼ on the remote controller to highlight the menu you wish to enter .
17 Main menu Sub menu Functions Default Reset Main menu Sub menu Functions Default Reset Main menu Sub menu Functions Default Reset Main menu Sub menu Functions Default Reset Main menu Sub menu Functions Default Reset Main menu Sub menu Functions Default Reset PICTURE CONTRAST Adjusts the contrast.
18 Picture Settings Menu Adjusting the picture The contrast, brightness, sharpness, color and tint can be adjusted as desired. Example: Adjusting the contrast Pr ess the PR OCEED button on the r emote contr oller to display the MAIN MENU on the scr een, then.
19 Setting the picture mode accor ding to the bright- ness of the room There are four picture modes that can be used ef fectively according to the en vironment in which you are viewing the display . Example: Setting the “THEA TER” mode Pr ess the PR OCEED button on the r emote contr oller to display the MAIN MENU on the scr een, then.
20 Setting the color temperature Use this procedure to set color tone produced by the plasma display . Example: Setting "1" Pr ess the PR OCEED button on the r emote contr oller to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ b uttons to select “PICTURE”, then press the “PR OCEED” button.
21 Adjusting the color to the desired quality Use this procedure to adjust the white balance for bright pic- tures and dark pictures to achie ve the desired color quality . Example: Adjusting the "WHITE BALANCE" Pr ess the PR OCEED button on the r emote contr oller to display the MAIN MENU on the scr een, then.
22 Reducing noise in the picture Use these settings if the picture has noise due to poor re- ception or when playing video tapes on which the picture quality is poor . Example: Setting “NR-3” Pr ess the PR OCEED button on the r emote contr oller to display the MAIN MENU on the scr een, then.
23 Adjusting the treble, bass and left/right balance The treble, bass and left/right balance can be adjusted to suit your tastes. Example: Adjusting the bass Pr ess the PR OCEED button on the r emote contr oller to display the MAIN MENU on the scr een, then.
24 Adjusting the P osition, Size, Fine Picture, Picture Adj The position of the image can be adjusted and flickering of the image can be corrected. Example: Adjusting the vertical position in the nor mal mode Pr ess the PR OCEED button on the r emote contr oller to display the MAIN MENU on the scr een, then.
25 Information Adjusting the Auto Picture ON ...................... The Picture ADJ and Fine Picture adjustments are made automati- cally . OFF .................... The Picture ADJ and Fine Picture adjustments are made manually . Adjusting the position of the image V -POSITION .
26 FUNCTION OSM OSM ADJ. POWER MGT GRAY LEVEL PLE CINEMA MODE RESET ON 1 OFF 3 AUTO AUTO : : : : : : SEL. ADJ. RETURN EXIT Adjusting the position of the menu displa y Use these operations to adjust the position of the menus that appear on screen.
27 Information P ower management function * The power management function automatically re- duces the monitor’ s po wer consumption if the computer’ s keyboard or mouse is not operated for a certain amount of time. This function can be used when using the monitor with a computer conforming to the VESA DPMS format.
28 PO WER/ST ANDBY indicator Pow er management mode Pow er management operating status PO WER/ST ANDBY indicator Description Tu r ning the picture bac k on Picture already on. Operate the keyboard or mouse. The pic- ture reappears immediately . Operate the keyboard or mouse.
29 Setting the gray le vel for the sides of the screen Use this procedure to set the gray le vel for the parts on the screen on which nothing is displayed when the screen is set to the 4:3 size. Example: Adjusting the "GRA Y LEVEL" Pr ess the PR OCEED button on the r emote contr oller to display the MAIN MENU on the scr een, then.
30 Setting the picture to suit the mo vie The film image is automatically discriminated and projected in an image mode suited to the picture. [NTSC, P AL, 480I(60Hz) only] Example: Setting the “CINEMA MODE” to “ON” Pr ess the PR OCEED button on the r emote contr oller to display the MAIN MENU on the scr een, then.
31 Setting the BNC connector s Select whether to set the input of the 5 BNC connectors to RGB or component. Example: Set the BNC SELECT mode to “COMP . ” Pr ess the “PROCEED” b utton on the r emote contr oller to display the MAIN MENU on the scr een, then.
32 Setting a computer image to the correct RGB se- lect screen On the computer image select the RGB mode, moving im- age (video) mode, wide mode or digital broadcast. Example: Setting the RGB SELECT mode to “VIDEO” Pr ess the PR OCEED button on the r emote contr oller to display the MAIN MENU on the scr een, then.
33 Setting high definition images to the suitable screen size Use this procedure to set whether the number of vertical lines of the input high definition image is 1035 or 1080. Example: Setting the "1080 B " mode to "1035 I " Pr ess the PR OCEED button on the r emote contr oller to display the MAIN MENU on the scr een, then.
34 Setting the language f or the menus The menu display can be set to one of se ven languages: Japa- nese, English, German, French, Swedish, Italian or Spanish. Example: Setting the menu displa y to “DEUTSCH” Pr ess the PR OCEED button on the r emote contr oller to display the MAIN MENU on the scr een, then.
35 Setting the video signal format Use these operations to set the video signal format. Example: Setting the video signal format to “3.58 NTSC” Pr ess the PR OCEED button on the r emote contr oller to display the MAIN MENU on the scr een, then... 1.
36 External Control plasma monitor External equipment e .g., P ersonal computer 1) Connector on the plasma monitor side: EXTERNAL CONTR OL connector . T ype of connector: D-Sub 9-pin male No .
37 Communication Format Command 1 Unit ID 1 Unit ID 2 Command 2 Data length Data Check sum Command 1 Command 1, along with command 2, is a number used to distinguish each command. In the case of A CK, when the lower order 4 bits is FH (as in 3FH and 7FH), this indicates that the commands and data of the supported equipment ha ve been recei ved.
38 Command Reference List CMD1 CMD2 LEN 01. Power ON 9FH 4EH 00H 02. Power OFF 9FH 4FH 00H 03. Input Switch Change DFH 47H 01H 04. VOLUME Gain Data DFH 7FH 03H 05. SCREEN MODE Select DFH 51H 01H 06. AUDIO Mute On 9FH 3EH 00H 07. AUDIO Mute Off 9FH 3FH 00H 08.
39 Display of items and adjustments on the menu On-Screen Display (OSD) Operation Remote control operation Y es Y es Y es No Personal computer control operation No No Y es No When screen display is ON V olume display , input display, and screen size display When screen display is OFF When screen display is ON When screen display is OFF 06.
40 11. SHARPNESS Gain Data Function The external control equipment changes the SHARPNESS gain data of the plasma monitor . T ransmission Data DFH 80H 60H 7FH 03H DA T A00 DAT A01 DA T A02 CKS DA T A00.
41 17. RED Gain Data Function The external control equipment changes the RED Gain Data of the plasma monitor . T ransmission Data DFH 80H 60H 7FH 04H DA T A00 to DA T A03 CKS DA T A00: USER PICTURE Ga.
42 20. VIDEO ADJ Request Function The display returns the video adjustments information by the external control equipment’ s request. T ransmission Data 1FH 80H 60H 45H 00H CKS ACK 7FH 60H 80H 45H 0.
43 21. Audio Select Set Function The external control equipment sets combinations of audio and video inputs for the plasma monitor . T ransmission Data DFH 80H 60H 70H 02H DA T A00 DA T A01 CKS DA T A.
44 T able for Signals Suppor ted Suppor ted resolution • When screen mode is NORMAL, each signal is con verted to a 640 dots 480 lines signal. (Except for *3) • When screen mode is FULL, each signal is con verted to a 853 dots 480 lines signal.
45 Picture is disturbed. Sound is noisy . Remote control unit operates errone- ously . The remote controller does not work. Monitor’ s power does not turn on when the remote controller’ s power button is pressed. Monitor does not operate when the re- mote controller’ s buttons are pressed.
Specifications The features and specifications may be subject to change without notice. Units are in inch (mm) Product Name Product Code Screen Size Aspect Ratio Resolution Pixel Pitch Color Reproduct.
NEC T echnologies, Inc. 1250 N. Arlington Heights Road, Suite 500 Itasca, Illinois 60143-1248 Printed in Japan 78411092 Printed on recycled paper.
Ein wichtiger Punkt beim Kauf des Geräts NEC 42MP1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NEC 42MP1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NEC 42MP1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NEC 42MP1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NEC 42MP1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NEC 42MP1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NEC 42MP1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NEC 42MP1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NEC 42MP1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.