Benutzeranleitung / Produktwartung TPC-2012 des Produzenten National Instruments
Zur Seite of 49
TPC-2012/TPC-2512 User Manual TPC-2012/TPC-2512 User Manual July 2008 372052C-01.
Support Worldwide Technical Support and Product Info rmation ni.com National Instruments Corporate Headquarters 11500 North Mopac Expressway Aust in, Texas 78759-3504 USA Tel: 512 683 0100 Worldwide O.
Important Information Warranty The TPC-2012 and TPC-2512 are warranted agains t defects in materials and wo rkmanship for a period of on e year from the date of shipment, as evidenced by receipts or other document ation.
Compliance Compliance with FCC/Canada Radio Frequency Interference Regulations Determining FCC Class The Federal Communications Commission (FCC) has rules to protect wireless co mmunications from inte rference. The FCC places digital electronics into two classes.
Conventions The follo wing con ventions are used in this manual: » The » symbol leads you through nested menu items and dialog box options to a final action. The sequence File»Page Setup»Options directs yo u to pull down the File menu, select the Page Setup item, and select Options from the last dialog box.
© National Instruments Corporatio n vii TPC-2012/TPC-2512 User Manual Contents Chapter 1 General Information Introduction ........................ .............. .............. .............. ............... .............. .............. ...... .1 - 1 I/O Ports .
Contents TPC-2012/TPC-2512 U ser Manual viii ni.com Appendix F Accessory Kit Assembly Procedure Appendix G Touchscreen Configuration Appendix H Fuse Replacement Appendix I Technical Support and Profes.
© National Instruments Corporatio n 1-1 TPC-2012/TPC-25 12 User Manual 1 General Information This chapter includes general i nformation about the TPC -2012/TPC-2512 Human Machine Interface (HMI).
Chapter 1 General Information TPC-2012/TPC-2512 U ser Manual 1-2 ni.com • T wo USB 2.0 ports compliant with USB 1.0 and 1.1. • One PCI/104 slot Figure 1-1 shows the I/O port arrangement. Figure 1-1. I/O Port Arrangement For more TPC-2012/TPC-2512 specifi cations, see Appendix A, Specifications .
© National Instruments Corporatio n 2-1 TPC-2012/TPC-25 12 User Manual 2 System Setup This chapter includes setup information for the TPC-2012/ TPC-2512. Important Safety Information Before setting up the TPC-2012/ TPC-2512, read these safety instructions carefully.
Chapter 2 System Setup TPC-2012/TPC-2512 U ser Manual 2-2 ni.com If one of the following situations ar ises, ha ve service personnel check the equipment: • The power cord or plug is damaged. • Liquid has penetrated into the equipm ent. • The equipment has been exposed to moisture.
Chapter 2 System Setup © National Instruments Corporatio n 2-3 TPC-2012/TPC-25 12 User Manual Caution Be sure system power is off before plugging in or pulling ou t the CompactFl ash card. 2. Install a CompactFlash card containing W indo ws CE, embedded W indo ws XP , or another operating syst em.
Chapter 2 System Setup TPC-2012/TPC-2512 U ser Manual 2-4 ni.com Panel Mounting Follow these steps to mount the TPC-2012/ TPC-2512 in a panel: 1. Be sure the adhesi ve waterproof gasket on the front bezel is in position. 2. Install the TPC-20 12/TPC-2512 in the panel opening.
© National Instruments Corporatio n 3-1 TPC-2012/TPC-25 12 User Manual 3 Jumpers and Connectors This chapter describes the TPC-2 012/TPC-2512 jumpers and connectors. Jumper and Connector Functions Table 3-1 lists the jumper and connector functions. Table 3-1.
Chapter 3 Jumpers and Conn ectors TPC-2012/TPC-2512 U ser Manual 3-2 ni.com JP1 Panel P anel connector JP2 To u c h T o uch connector JP4 5 V/3 V PCI104 5 V/3 V select J1 DDR DDR connector J3 1*3 pin header Clear CMOS SW1 Power switch System power switch BH1 Battery R T C battery FS1 Fuse Fuse holder Table 3-1.
Chapter 3 Jumpers and Connectors © National Instruments Corporatio n 3-3 TPC-2012/TPC-25 12 User Manual Jumper and Connector Locations Figures 3-1 and 3-2 show the ju mper and connector locations.
Chapter 3 Jumpers and Conn ectors TPC-2012/TPC-2512 U ser Manual 3-4 ni.com Figure 3-2. Main Board Jumpers and Connectors.
© National Instruments Corporatio n A -1 TPC-2012/T PC-2512 User Manual A Specifications This appendix lists the TPC-2012/TPC-2512 sy stem specifications. Physical Weight ......... ................. .............. ............ 4.1 kg (without HDD) Cutout dimensions.
Appendix A Specifications TPC-2012/TPC-2512 User Manual A-2 ni.com Dimensions 11 [0.433] 7 [0.079] 237 [9.331] 311 [12.244] 301.49 [11.869] 227.49 [8.956] 2.
Appendix A Specifications © National Instruments Corporatio n A -3 TPC-2012/TPC-2512 User Manual System Kernel CPU ....... .............. ................. .............. .... GeodeLink Control Processor LX800 500 MHz BIOS................. ..........
Appendix A Specifications TPC-2012/TPC-2512 User Manual A-4 ni.com Backlight ......... .............. .............. ............2 CCFL Backlight lifespan ............... ................ ....50,000 h Note There may be several bright or dark pixels on the LCD.
Appendix A Specifications © National Instruments Corporatio n A -5 TPC-2012/TPC-2512 User Manual Vibration ................... .............. .............. . 1 grms (5 to 500 Hz) Maximum altitude ...................... ............ 2,000 m Pollution Degree .
Appendix A Specifications TPC-2012/TPC-2512 User Manual A-6 ni.com Environmental Management National Instruments i s committed to design ing and manu facturing products in an environmental ly responsible manner.
© National Instruments Corporatio n B -1 TPC-2012/TPC-2512 User Manual B Serial Port Settings This appendix describes the TPC-2012/TPC-2512 serial port settings. COM1/COM2/COM3 Connector Pinout The follo wing fi gure and t able sh o w the COM1/COM2/COM3 connector pinout.
Appendix B Serial Port Settings TPC-2012/TPC-2512 User Manual B-2 ni.com COM4 Connector Pinout and Settings The TPC-2012/TPC-2512 COM4 serial port is adjustable. Y ou can set it to RS-232, RS-422, or RS-485, and it has au to data fl o w control capability .
Appendix B Seria l Port Settings © National Instruments Corporatio n B -3 TPC-2012/TPC-2512 User Manual PIN RS-232 RS-422 RS-485 1 NDCD TX– D– 2 NRX TX+ D+ 3 NTX RX+ 4 NDTR RX– 5 GND GND GND 6 .
© National Instruments Corporatio n C -1 TPC-2012/TPC-2512 User Manual C W atchdog T imer Programming This appendix explains the TPC-2012/TPC-2512 watchdog timer programming.
Appendix C W atchdog T imer Programming TPC-2012/TPC-2512 User Manual C-2 ni.com Figure C-1 describes the watchdog timer program ming procedure, and T ab le C-1 describes the watchdog timer registers.
Appendix C W atchdog T imer Programmin g © National Instruments Corporatio n C -3 TPC-2012/TPC-2512 User Manual Table C-1. Watchdog T imer Registers Address of Register (2E) Attribute Description Read/Write V alue (2F) and descriptio n — 87 (hex) — Write this ad dress twice to I/O address port 2E (hex) to unlock the W83627HF .
Appendix C W atchdog T imer Programming TPC-2012/TPC-2512 User Manual C-4 ni.com Example Programs Example 1: Enable the W atchdog T imer and Set 10 s as the T imeout Inter val ;-----------------------.
Appendix C W atchdog T imer Programmin g © National Instruments Corporatio n C -5 TPC-2012/TPC-2512 User Manual Example 2: Enable the W atchdog T imer and Set 5 Min as the T imeout Inter val ;-------.
Appendix C W atchdog T imer Programming TPC-2012/TPC-2512 User Manual C-6 ni.com Example 3: Enable the Mouse to Reset the W atchdog T imer ;----------------------------------- ------------------------.
Appendix C W atchdog T imer Programmin g © National Instruments Corporatio n C -7 TPC-2012/TPC-2512 User Manual Example 4: Enable the Keyboard to Reset the W atchdog T imer ;-------------------------.
Appendix C W atchdog T imer Programming TPC-2012/TPC-2512 User Manual C-8 ni.com Example 5: Generate a T imeou t Signal without Timer Counting ;----------------------------------- --------------------.
© National Instruments Corporatio n D-1 TPC-2012/TPC-2512 User Manual D W atchdog T imer Programming on WinCE (TPC-2012) W indo ws CE includes a watchdog timer for the TPC-2012/ TPC-2512. Y o u can access the timer through the WI N32 API. The TP C-2012/TPC-2512 includes a WDT driver , WDT1 :, for enabling/disabling t he watchdog timer .
Appendix D W atchdog Timer Pr ogramming on Win CE (TPC-2012) TPC-2012/TPC-2512 U ser Manual D-2 ni.com • dwIoControlCode (in) Specifies the operation contro l code. This v alue identifies the specific operation to be performed a nd the type of de vice on which the operation is to be performed.
Appendix D W atchdog T imer Progr amming on WinCE (TPC-2012) © National Instruments Corporatio n D-3 TPC-2012/TPC-2512 User Manual How to Use the Control Codes There are six control codes for the WDT dri ver operation codes. IOCTL _WDT_ENABLE Enables the application watchdog timer .
Appendix D W atchdog Timer Pr ogramming on Win CE (TPC-2012) TPC-2012/TPC-2512 U ser Manual D-4 ni.com • lpOutBuffer : The D WORD points to your watchdog time setting. The watchdog time settings are: • nOutBufferSize : unused IOCTL_WDT_SETTIMEOUT Sets the watchdog time setting.
Appendix D W atchdog T imer Progr amming on WinCE (TPC-2012) © National Instruments Corporatio n D-5 TPC-2012/TPC-2512 User Manual IOCTL_WDT_REBOOT If you want your application to trigger the watchdog, use IOCTL_WDT_REBOOT to notify the watchdog driv er timer (WDT).
Appendix D W atchdog Timer Pr ogramming on Win CE (TPC-2012) TPC-2012/TPC-2512 U ser Manual D-6 ni.com While (1) { // do your job here. Sleep(8000); DeviceIoControl(m_hWDT, IOCTL_WDT_ST ROBE, NULL,0, .
© National Instruments Corporatio n E-1 TPC-2012/TPC-25 12 User Manual E Features in Windows XP Embedded (TPC-2512) The TPC-2512 supports the Windo ws XP Embedded platform (comm only abbrev iated XPe), which is a componentized v ersion of the W indo ws XP Professional edition.
© National Instruments Corporatio n F-1 TPC-2012/TPC-25 12 User Manual F Accessor y Kit Assembly Procedure This appendix explains ho w to connect to a CD-R OM via the CompactFlash slot. CompactFlash to IDE T ransfer Kit Assembly Follo w these steps to connect to a CD-R OM via the CompactFlash slot: 1.
© National Instruments Corporatio n G-1 TPC-2012/TPC-2512 User Manual G T ouchscreen Configuration This appendix explains ho w to configure the TPC-2012/TPC-2512 touchscreen using the PenMount Control Panel.
© National Instruments Corporatio n H-1 TPC-2012/TPC-2512 User Manual H Fuse Replacement Caution Do not replace the fuse unless it is damaged. Do not replace the fuse with a differently rated fuse. For more information, see the fuse specifications in Appendix A, Specifications .
© National Instruments Corporatio n I-1 TPC-2012/TPC-2512 User Manu al I T echnical Support and Professional Ser vices Visit the following sections of the award-winning National Instruments Web site at ni.com for technical support and professional services: • Support —T echnical support resou rces at ni.
Appendix I T echnical Support and Professional Services TPC-2012/TPC-2512 U ser Manual I-2 ni.com If you searched ni.com and could not find the answers you need, contact your local off ice or NI corporate h eadquarters. Phone numbers for our worldwide of f ices are listed at the front of this manual.
© National Instruments Corporation Index-1 TPC-2012/T PC-2512 User Manual Index A accessory kit assembly, F-1 C CE compliance specif ications, A-5 cleaning, 1-2, A-6 COM1/COM2/COM3 connector pinout ,.
Index TPC-2012/TPC-2512 U ser Manual Index-2 ni.com J jumpers, 3-1 function descriptions (table), 3 -1 locations (table), 3-3, 3-4 K Kno wledgeBase, I-1 L LCD specifications, A-3 M mercury disposal an.
Index © National Instruments Corporation Index-3 TPC-2012/T PC-2512 User Manual electromagnetic compatibility specifications, A-5 en vironmental management specifications, A-6 en vironmental specif i.
Ein wichtiger Punkt beim Kauf des Geräts National Instruments TPC-2012 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie National Instruments TPC-2012 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für National Instruments TPC-2012 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von National Instruments TPC-2012 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über National Instruments TPC-2012 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon National Instruments TPC-2012 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von National Instruments TPC-2012 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit National Instruments TPC-2012. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei National Instruments TPC-2012 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
