Benutzeranleitung / Produktwartung PCI-1411 des Produzenten National Instruments
Zur Seite of 48
IMAQ ™ IMAQ PCI/PXI ™ -1411 User Manual Single-Channel Color Image Acquisition Board for PCI, PXI, and CompactPCI Chassis IMAQ PCI/PXI-1411 User Manual October 1999 Edition Part Number 3221 57B-01.
Worldwide Technical Support and Product Info rmation www.ni.com National Instruments Corporate Headquarters 11500 North Mopac Expressway Austin, Texas 78759-3504 USA Tel: 512 794 0100 Worldwide Office.
Important Information Warranty The PCI-1411 and PXI-1411 are warranted against defects in ma terials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation.
Compliance FCC/Canada Radio Frequency Interference Compliance* Determining FCC Class The Federal Communications Commission (FCC) has rules to protect wireless communications from interference.
interference to radio or te levision reception, which can be determined by turning the equipme nt off and on, the user is encouraged to try to correct the interferenc e by one or more of the following measures: • Reorient or relocate the receiving antenna.
Conventions The following con ventions are used in this manual: ♦ The ♦ symbol indicates that the follo wing text applies only to a specif ic product, a specific operating system, or a specifi c software v ersion. This icon denotes a note, which alerts you to important information.
© National Instruments Corporation vii IMAQ PCI/PXI-1411 User Manual Contents Chapter 1 Introduction About the PCI/PXI-1411 ....................... ......................... .......................... ....................... 1-1 Using PXI with CompactPCI .
Contents IMAQ PCI/PXI-1411 User Manual viii www.ni.com Chapter 4 Signal Connections I/O Connector .. ......................... ......................... .......................... ........... ........... .............. 4-1 Signal Description .........
© National Instruments Corporation 1-1 IMAQ PCI/PXI-1411 User Manual 1 Introduction This chapter describes the PCI/PXI-1411 and describes yo ur software programming choices.
Chapter 1 Introduction IMAQ PCI/PXI-1411 User Manual 1-2 www .ni.com Using PXI with CompactPCI Using PXI-compatible products with standard CompactPCI products is an important feature provided by the PXI Specification , Revision 1.
Chapter 1 Introduction © National Instruments Corporation 1-3 IMAQ PCI/PXI-1411 User Manual Figure 1-1. The Relationship between the Programming Environment, NI-IMAQ, and Y our Hardware NI-IMAQ Driver Software The NI-IMAQ driver software is included with your IMAQ device.
Chapter 1 Introduction IMAQ PCI/PXI-1411 User Manual 1-4 www .ni.com Figure 1-2. NI-IMAQ Functions The NI-IMA Q driver software performs all functions required for acqu iring and saving images. The NI-IMA Q software does not perform any image analysis.
Chapter 1 Introduction © National Instruments Corporation 1-5 IMAQ PCI/PXI-1411 User Manual National Instruments IMAQ Vision IMAQ Vision is an image acquisition, processing, and analysis library of m.
Chapter 1 Introduction IMAQ PCI/PXI-1411 User Manual 1-6 www .ni.com Integration with DAQ Any platform that supports NI-IMA Q also supports NI-DAQ an d a variety of National Instruments DAQ boards, so yo ur IMAQ device and N I-IMAQ development can integrate with Na tion al Instruments DAQ products.
© National Instruments Corporation 2-1 IMAQ PCI/PXI-1411 User Manual 2 Installation This chapter lists what you need to get started acquiring images with your IMAQ device; describes optional equipment and custom cables; and explains ho w to unpack, configure, and install your IMAQ device.
Chapter 2 Installation IMAQ PCI/PXI-1411 User Manual 2-2 www .ni.com Optional Equipment National Instruments offers a variety of products for use with your PCI/PXI-1411, including other Natio nal In struments DAQ devices for enhanced triggering, timing, or input/o utpu t.
Chapter 2 Installation © National Instruments Corporation 2-3 IMAQ PCI/PXI-1411 User Manual Figure 2-1. How to Set up Y our IMAQ System LabWindows/CVI Third-P ar ty Compilers LabVIEW BridgeVIEW What application software are you using? Configure your hardw are using the Measurement & Automation Explorer and online help .
Chapter 2 Installation IMAQ PCI/PXI-1411 User Manual 2-4 www .ni.com Unpacking Your PCI/PXI-1411 is shipped in an antistatic package to prevent electrostatic damage to the board.
Chapter 2 Installation © National Instruments Corporation 2-5 IMAQ PCI/PXI-1411 User Manual 4. Locate the metal bracket that co vers the cut-out in the back panel of the ch assis for th e slot you hav e selected. Remove and sa ve the bracket-retaining scre w and the bracket co ver .
© National Instruments Corporation 3-1 IMAQ PCI/PXI-1411 User Manual 3 Hardware Over view This chapter presents an overview of the hardware functions on your PCI/PXI-1411 board and explains the operation of each functional unit making up the PCI/PXI-1411.
Chapter 3 Hardware Over view IMAQ PCI/PXI-1411 User Manual 3-2 www .ni.com Video Decoder The PCI/PXI-1411 supports NTSC and PAL video standards in either composite or S-Video format.
Chapter 3 Hardware Overview © National Instruments Corporation 3-3 IMAQ PCI/PXI-1411 User Manual SDRAM The PCI/PXI-1411 comes with 16 MB of onboard high-speed synchrono us dynamic RAM (SDRAM).
Chapter 3 Hardware Over view IMAQ PCI/PXI-1411 User Manual 3-4 www .ni.com Bus Master PCI Interface The PCI/PXI-1411 implements the PCI interface with a National Instruments custom application-specific integrated circuit (ASIC), the PCI MITE. The PCI interface can transfer data at a maximum rate of 132 Mbytes/s in bus master mode.
Chapter 3 Hardware Overview © National Instruments Corporation 3-5 IMAQ PCI/PXI-1411 User Manual • Region of interest — The PCI/PXI-1411 uses a second lev el of acti ve pixel and acti ve line regions for selecting a re gion of interest.
© National Instruments Corporation 4-1 IMAQ PCI/PXI-1411 User Manual 4 Signal Connections This chapter describes cable connections for the PCI/PXI-1411. I/O Connector The PCI/PXI-1411 uses one S-Video and two BNC connectors on the front panel to connect to video data inputs and the external trigger signal.
Chapter 4 Signal Connections IMAQ PCI/PXI-1411 User Manual 4-2 www .ni.com Signal Description Table 4-1 describes each signal connection on the 1411 device connectors: Custom Cables If you plan to make your own cables, refer to Figure 4-2 for th e pin-out of the S-Video connector, as seen from the front of the PCI/PXI-1411.
© National Instruments Corporation A-1 IMAQ PCI/PXI-1411 User Manual A Specifications This appendix lists the specif ications of the PCI/PXI-1411. These specifications are typical at 25 °C, unless otherwise stated. Formats Supported Input formats RS-170/NTSC .
Appendix A Specifications IMAQ PCI/PXI-1411 User Manual A-2 www .ni.com A/D Conversion Quantity ..................... ........... .............. .... One 8-bit 2X oversampling for composite video Two 8-bit 2X oversampling for Y/C (S-Video) Dynamic range .
Appendix A Specifications © National Instruments Corporation A-3 IMAQ PCI/PXI-1411 User Manual PCI Interface PCI initiator (master) capability ............. Supported PCI target (slave) capability ................... Suppo rted Data path ............
Appendix A Specifications IMAQ PCI/PXI-1411 User Manual A-4 www .ni.com Physical Dimensions PCI-1411.......................................... 10.7 by 17.5 cm (4.2 by 6.9 in .) PXI-1411 ......... ............ .............. ...... 10 by 16 cm (3.9 by 6.
© National Instruments Corporation B-1 IMAQ PCI/PXI-1411 User Manual B Introduction to Color Color is the w a v elength of the light we re cei ve in our e ye when we look at an object.
Appendix B I ntroduction to Co lor IMAQ PCI/PXI-1411 User Manual B-2 www .ni.com The perception of a color depends on man y factors, such as: • Hue , which is the percei ved dominant color . Hue depends directly on the wa velength of a color . • Saturation , which is dependent on the amount of white light present in a color .
Appendix B I ntroduction to Color © National Instruments Corporation B-3 IMAQ PCI/PXI-1411 User Manual Hue, Saturation, Luminance, and Intensity Planes The 8-bit hue, saturation, luminance, and intensity planes can also be returned individually if you want to analyze the image.
© National Instruments Corporation C-1 IMAQ PCI/PXI-1411 User Manual C T echnical Support Resources This appendix describes the comprehensiv e resources av ailab le to yo u in the T echnical Sup port.
Appendix C T echnical Support Resour ces IMAQ PCI/PXI-1411 User Manual C-2 www .ni.com Software-Related Resources • Instrument Driver Network — A library with hundreds of instru ment dri v ers for contro l of standalone instruments via GPIB, VXI, or serial interfaces.
© National Instruments Corporation G-1 IMAQ PCI/PXI-1411 User Manual Glossar y Pref ix Meaning V alue p- pico- 10 –1 2 n- nano- 10 –9 µ- micro- 10 –6 m- milli- 10 –3 k- kilo- 10 3 M- mega- 10 6 G- giga- 10 9 t- tera- 10 12 Numbers/Symbols + Positiv e of, or plus.
Glossary IMAQ PCI/PXI-1411 User Manual G-2 www .ni.com ac t i ve p i x e l r e g i on The region of pixels acti vely being stored. Def ined by a pixel start (relati ve to the horizontal synchronization signal) and a pixel count. ad d r e s s V alue that identif ies a specific location (or series of locations) in memory .
Glossary © National Instruments Corporation G-3 IMAQ PCI/PXI-1411 User Manual co l o r s p ac e The mathematical representation for a color . For example, color can be described in terms of red, green, and blue; hue, satu ration, and luma; or hue, saturation, and intensity .
Glossary IMAQ PCI/PXI-1411 User Manual G-4 www .ni.com dr i ve r s Software that controls a specif ic hardware device, such as an image acquisition board.
Glossary © National Instruments Corporation G-5 IMAQ PCI/PXI-1411 User Manual H hH o u r . HSI Color encod ing scheme in Hue, Saturation, and Intensity .
Glossary IMAQ PCI/PXI-1411 User Manual G-6 www .ni.com intensity The sum of the Red, Green, and Blue primaries di vided by three: (Red + Green + Blue)/3. in t e rl a c ed A video frame composed of two interlea ved fields. The number of lines in a f ield are half the number of lines in an interlaced frame.
Glossary © National Instruments Corporation G-7 IMAQ PCI/PXI-1411 User Manual M m Meters. M (1) Mega, the standard metric pref ix for 1 mi llio n or 10 6 , when used with units of measure such as volts and hertz; (2) mega, the pref ix for 1,048,576, or 2 20 , when used with B to quantify data or computer memory .
Glossary IMAQ PCI/PXI-1411 User Manual G-8 www .ni.com P PA L P hase Alternation Line. One of the European video color standards; uses 625 lines per frame. See also NTSC. PC I Peripheral Component Interconnect. A high-performance expansion bus architecture originally dev eloped by Intel to replace ISA and EISA.
Glossary © National Instruments Corporation G-9 IMAQ PCI/PXI-1411 User Manual RG B Color encoding scheme usin g red, green, and blue (RGB) color information where each pixe l in the color image is encoded using 32 bits: 8 bits for red, 8 bits for green, 8 bits for blue, and 8 bits for the alpha v alue (unused).
Glossary IMAQ PCI/PXI-1411 User Manual G-10 www .ni.com T tr a n s f e r r a te The rate, measured in bytes/s, at which data is mo ved from source to destination after software initializatio n and set up operatio ns. The maximum rate at which the hardware can operate.
© National Instruments Corporation I-1 IMAQ PCI/PXI-1411 User Manual Index A accuracy specifications, A-2 acquisition acquisition, scaling, and ROI circuitry , 3-3 acquisition window control, 3-4 to .
Index IMAQ PCI/PXI-1411 User Manual I-2 www .ni.com video acquisition, 3-1 video decoder, 3-2 hue 32-bit HSL and HSI, B-3 definition, B-2 hue, saturation, luminance, and intens it y planes, B-3 I imag.
Index © National Instruments Corporation I-3 IMAQ PCI/PXI-1411 User Manual R RAM board configuration NVRAM, 3-4 SDRAM, 3-3 region of interest acquisition, scaling, and ROI circuitry, 3-3 configuring,.
Ein wichtiger Punkt beim Kauf des Geräts National Instruments PCI-1411 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie National Instruments PCI-1411 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für National Instruments PCI-1411 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von National Instruments PCI-1411 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über National Instruments PCI-1411 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon National Instruments PCI-1411 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von National Instruments PCI-1411 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit National Instruments PCI-1411. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei National Instruments PCI-1411 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
