Benutzeranleitung / Produktwartung NI PCI-6111 des Produzenten National Instruments
Zur Seite of 118
DAQ NI PCI-6110/61 11 User Manua l Mulitfunc tion I/O De vices for P CI Bus Comp uters NI PCI-6110 /6111 User Manu al July 200 3 Edition Part Num ber 321759E-0 1.
Supp ort Worl dwide Techn ical Supp ort and Produ ct Informatio n ni.com Nati onal In strum ents Cor pora te He adqu arters 11500 Nor th Mopac E xpressway Austin, T exas 78759 -3504 USA Tel: 512 683 0.
Important Information Warrant y The NI PC I-6110 and the NI PCI-6111 are warr anted agains t defects in materia ls and workm anship for a period of one y ear from th e date of shipment, as evidenced by re ceipts or oth er documentat ion.
Compliance FCC/Canad a Radio Freq uency Interference Com pliance Determining FCC Class The Fed eral Commu nicati ons Commis sion (FCC) has rule s to prote ct wire less commu nicatio ns from in terfer ence. The FCC places digi tal electron ics into two classes.
© Nationa l Instrume nts Cor poration v NI PCI-61 10/6111 Us er Manu al Contents About This M anual Convention s ............. ................. ................ ................. ................. ............ ................. ...... i x National Instruments Documentation .
Contents NI PCI-6110 /6111 User M anual vi ni.com Chapter 4 Connecting Sig nals I/O Connector ................... ................. ................. ................. ........... ................. .............. 4- 1 I/O Connector Sign al Descriptions .
Contents © Nationa l Instrume nts Cor poration vii NI PCI-61 10/6111 Us er Manu al GPCTR1_OUT Signal .................. ................. ................. ............ ...... 4-35 GPCTR1_UP_DOWN Signal ............. ........... ................. ...
© Nationa l Instrume nts Cor poration ix NI PCI-6110/ 6111 Use r Manu al About This Manual This manual describes the electrical an d mechanical aspects of the National Instr uments PCI- 6110/6111 data acqui sition (D A Q) de v ice and contai ns informati on concernin g its opera tion and progr amming.
About This Ma nual NI PCI-6110 /6111 User M anual x ni.com NI-D A Q NI-D A Q refers to the NI-D A Q driv er softw are for Macint osh or PC compati ble comput ers unless ot herwise not ed. NI PC I-6110/611 1 This p hrase refers to either th e NI PCI-61 10 or NI PC I-6111 de vi ce.
About This Ma nual © Nationa l Instrume nts Cor poration xi NI PCI-6110/ 6111 Use r Manual Related Documentation The follo wing document s contain information that you might f ind helpful: • The NI Dev eloper Zone tutorial, Field Wiring and Noise Consider ations for Analog Si gnals, located at ni.
© Nationa l Instrume nts Cor poration 1-1 NI PCI-61 10/6111 Us er Manu al 1 Introduction This chapt er describes the NI PCI-61 10/6111 , lists what y ou need to get started, d escribes t he optional s oftware and optional equi pment, and explains how to unpack the device.
Chapter 1 Introduction NI PCI-6110 /6111 User M anual 1-2 ni.com What Y ou Need to Get Started To set up and use the NI PCI-6 110/6111, yo u will need the fol lowing i tems: ❑ NI PCI-6 110/6111 ❑ .
Chap ter 1 Int rodu ction © Nationa l Instrume nts Cor poration 1-3 NI PCI-61 10/6111 Us er Manu al Figu re 1-1. The Re lation ship Betwee n the Pr ogrammi ng Env ironme nt, NI-DAQ, and the Hardware T o do wnload a free cop y of the most recent v ersion of NI- D A Q, click Download Software at ni.
Chapter 1 Introduction NI PCI-6110 /6111 User M anual 1-4 ni.com de velopers, Meas urement Studio of fers a set of V isual C++ classes and tools to integrate th ose classes into V isual C++ applications. The libraries, Acti veX controls, and classes are av ailable with Measurement Studio and NI-D A Q.
Chap ter 1 Int rodu ction © Nationa l Instrume nts Cor poration 1-5 NI PCI-61 10/6111 Us er Manu al The follo wing list gi ves reco mmended part n umbers for conn ectors that mate to t he I/O connect.
Chapter 1 Introduction NI PCI-6110 /6111 User M anual 1-6 ni.com Do not operate th e product in an exp losiv e atmosphere or where ther e may be flammable gas es or fume s. Operate the product only at o r belo w the pollution degree stated in the Appendix A, Sp ecifications .
Chap ter 1 Int rodu ction © Nationa l Instrume nts Cor poration 1-7 NI PCI-61 10/6111 Us er Manu al Examples of Installati on Cate gory II are measurements on hous ehold appliances, portable too ls, and similar eq uipment. • Installation C ategory III is fo r measurements performed in the building installation.
© Nationa l Instrume nts Cor poration 2-1 NI PCI-61 10/6111 Us er Manu al 2 Installing and Configuring the NI PCI-6110/6111 This chapt er explains ho w to instal l and configure t he NI PCI-61 10/6111.
Chapter 2 Installing an d Configurin g the NI PCI-6 110/6111 NI PCI-6110 /6111 User M anual 2-2 ni.com 6. If requi red, scre w the mo unting b racket of the NI PCI- 6110/6111 to the back panel rail of the computer .
© Nationa l Instrume nts Cor poration 3-1 NI PCI-61 10/6111 Us er Manu al 3 Hardware Over view This chapter pres ents an overview of the hardware functions on the NI PC I-6110/6111 . Figures 3-1 and 3-2 sh ow block d iagrams for t he NI PCI-6 110 and t he NI PCI-6111, respectivel y.
Chapte r 3 Hardwa re Overvi ew NI PCI-6110 /6111 User M anual 3-2 ni.com Figu re 3-2 . NI PCI-6111 Block D iagram Analog Input The AI s ection fo r the NI PCI-6110/6 111 is s oftware co nfigurable. You can select di fferent AI confi gurations t hrough a pplication software.
Chapt er 3 Hard ware Overv iew © Nationa l Instrume nts Cor poration 3-3 NI PCI-61 10/6111 Us er Manu al input of the PGIA. For more information about DIFF in put mode, refer to the Connecting Ana log Inpu t Signal s section of Chapter 4, Conn ect ing Sign als , whi ch contains diagrams showing the signal paths for DIFF in put mode.
Chapte r 3 Hardwa re Overvi ew NI PCI-6110 /6111 User M anual 3-4 ni.com Consideration s for Selecti ng Input R anges The range you select de pends on the exp ected range of the incoming signal. A large input rang e can accommodate a large s ignal variation but reduces the voltage resolution.
Chapt er 3 Hard ware Overv iew © Nationa l Instrume nts Cor poration 3-5 NI PCI-61 10/6111 Us er Manu al Figu re 3-3. Analog T rigg er Block Diag ram for the NI PCI- 6110 Figu re 3-4. Analog T rigg er Block Diag ram for the NI PCI- 6111 Fi ve analog trigger ing modes are av ailabl e, as sho wn in F igures 3-5 throug h 3-9.
Chapte r 3 Hardwa re Overvi ew NI PCI-6110 /6111 User M anual 3-6 ni.com In belo w-low-lev el analog triggering mode, the trigger is g enerated when the signal v alue is less than lowValue , as shown in F igur e 3- 5. HighValue is un used. Figu re 3-5.
Chapt er 3 Hard ware Overv iew © Nationa l Instrume nts Cor poration 3-7 NI PCI-61 10/6111 Us er Manu al Figu re 3-7. In side-Reg ion A nalog T r igger ing Mod e In high-hysteresis analog triggering .
Chapte r 3 Hardwa re Overvi ew NI PCI-6110 /6111 User M anual 3-8 ni.com The analog trigger circ uit generates an internal digital tr igger based on the AI signal and user-defined trigger lev els. This digital trig ger can be used by any D A Q-STC timing sect ion, includin g the AI, A O, and gener al-purpose counter/timer sections.
Chapt er 3 Hard ware Overv iew © Nationa l Instrume nts Cor poration 3-9 NI PCI-61 10/6111 Us er Manu al Figu re 3-10. ST ART SCAN Sign al Rout ing This f igure sho w s that ST AR TSCAN c an be genera ted from a numb er of sources, includin g the external sig nals R TSI<0.
Chapte r 3 Hardwa re Overvi ew NI PCI-6110 /6111 User M anual 3-10 ni.com Programmabl e Function I nputs The 10 P FIs are connected to the signal routing multiplexer f or each timing signal, and s oftware can select a PFI as the ex ternal source for a giv en timing si gnal.
Chapt er 3 Hard ware Overv iew © Nationa l Instrume nts Cor poration 3-11 NI PCI-61 10/611 1 User Manu al RT SI T riggers The seven RTSI trigger lines o n the RTSI bus provide a flexible interconnection s cheme for the dev ice sharing the RTSI bu s.
© Nationa l Instrume nts Cor poration 4-1 NI PCI-61 10/6111 Us er Manu al 4 Connecting Signals This chapt er describes how t o make input and output si gnal connection s to the NI PCI-611 0/6111 thro ugh the device I/ O connector. Table 4-1 sh ows the cables that can b e used with the I/O connector s to connect to different accessories.
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-2 ni.com Figu re 4-1. 68- Pin I/ O Conn ecto r Pin As signm ent f or the NI PCI-6 110/61 11 FREQ_OUT GPCTR0_OUT PFI9/GPCTR0_GATE DGND PFI.
Chapter 4 Connec ting Sig nals © Nationa l Instrume nts Cor poration 4-3 NI PCI-61 10/6111 Us er Manu al Figur e 4-2. 50 -Pin C onnec tor Pi n Assign ments for th e NI PCI- 6110 /6111 I/O Connecto r Signa l Descri ptions Tabl e 4-2. Sign al De scri ptions fo r I/O Conne ctor Pin s Signal Name Reference Di rec tio n Description ACH<0.
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-4 ni.com ACH<0..3>– ACH<0..3>GND Input Anal og Input Cha nnels 0 throu gh 3 (–)—The se pins are routed to the (–) termi nal of the re spective channel amplifier . A CH<2 .
Chapter 4 Connec ting Sig nals © Nationa l Instrume nts Cor poration 4-5 NI PCI-61 10/6111 Us er Manu al PFI2/CON VERT* DGND Input Output PFI2/Co n vert —As an input, this is a PFI. As an output, this is th e CONVER T* si gnal. A high-to-lo w edge on CONVER T* indicates th at an A/D conversion is occurring.
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-6 ni.com GPCTR0_OUT DGND Output Count er 0 O utput—T his outp ut is f rom the genera l-purpose coun ter 0 o utput. FREQ_OUT DGND O utput Freque nc y Ou tput—T his outp ut i s from the freq uenc y generator output .
Chapter 4 Connec ting Sig nals © Nationa l Instrume nts Cor poration 4-7 NI PCI-61 10/6111 Us er Manu al PFI3/GPCTR1_SOURCE DIO — V cc +0.5 3.5 at (V cc –0.4 ) 5 at 0.4 1. 5 50 k Ω pu PFI4/GPCTR1_GATE DIO — V cc +0.5 3. 5 at (V cc –0.4) 5 at 0.
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-8 ni.com Connecting Analog Input Signals The NI PCI-6110/61 11 channels are con figured as pseud odifferential inputs. The input s ignal of each ch annel, ACH<0..3>+, is tied to the positive input of the PGIA, and each reference s ignal ACH<0.
Chapter 4 Connec ting Sig nals © Nationa l Instrume nts Cor poration 4-9 NI PCI-61 10/6111 Us er Manu al The PGIA applies g ain and common-mod e voltage rejection an d presents high inpu t impedance to the AI signals connect ed to the NI PCI-611 0/6111.
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-10 ni.com Differential Measurements The following sections discuss the use o f differential (DIFF) measurements and consid erations fo r measuring b oth floating and ground- referenced signal so urces.
Chapter 4 Connec ting Sig nals © Nationa l Instrume nts Cor poration 4-11 NI PCI-61 10/611 1 User Manu al Differenti al Conne ctions fo r Ground-Ref erenced Signal Sources Figure 4-4 shows how to connect a grou nd-referenced signal so urce to a channel o n the NI PCI- 6110/6111.
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-12 ni.com Differenti al Conne ctions fo r Nonreferen ced or Floating Signal So urces Figure 4-5 shows how to connect a fl oating sign al source to a channel on the NI PCI-611 0/6111. Figu re 4-5.
Chapter 4 Connec ting Sig nals © Nationa l Instrume nts Cor poration 4-13 NI PCI-61 10/611 1 User Manu al Like any am pli fier , the c ommo n-mo de rej ec tion ra ti o (CMR R) of t he PGI A is limited at high frequency .
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-14 ni.com Analog Output Signal Connections The AO signals are DAC0OUT, DAC1OUT, and AOGND. D A C 0OUT is the vo ltage output signal for A O channel 0, D A C1OUT is the vo ltage output signal for A O channel 1, and A OGND is the ground reference sign al for the A O channels.
Chapter 4 Connec ting Sig nals © Nationa l Instrume nts Cor poration 4-15 NI PCI-61 10/611 1 User Manu al Digital I/O Signal Connections The DIO signals are DIO<0..7> and DGND. DIO<0..7> are the signals making up the DIO port, and DGND is the ground reference signal for the DIO port.
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-16 ni.com Figure 4-7 show s DIO<0..3> co nfi gured for d igital inpu t and DIO<4..7 > conf igured for d igital output. Digital input application s include recei ving TTL signals and s ensing extern al devi ce states, such as the switch state sho wn in Figure 4- 7.
Chapter 4 Connec ting Sig nals © Nationa l Instrume nts Cor poration 4-17 NI PCI-61 10/611 1 User Manu al All digital timing connection s are referenced to DGND. Figure 4-8 illustrates how to connect an e xternal TRIG1 source and an external CONVER T* source t o two N I PCI-6110/ 6111 PFI p ins.
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-18 ni.com In edge-det ection mod e, the minimum pulse wi dth requir ed is 10 ns . This set ting appl ie s for b oth r ising -edg e an d fal ling- edge po larit y set ting s. Edge-det ect mode does n ot ha ve a max imum pulse- width r equirement.
Chapter 4 Connec ting Sig nals © Nationa l Instrume nts Cor poration 4-19 NI PCI-61 10/611 1 User Manu al Figu re 4-1 0. T ypical Pre triggered Acquisi tion TRIG1 Signa l Any PFI pin can receiv e as an input the TRIG1 signal, which is available as an outpu t on the P FI0/TRIG1 pin.
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-20 ni.com Figures 4-11 and 4-12 s ho w the timing req uirements for TR IG1. Figur e 4-11. TR IG1 I nput Si gnal Timing Figu re 4-12. TRIG1 Out put Si gnal Timing The de vice also uses TRIG1 to initiate pretriggered DA Q operations.
Chapter 4 Connec ting Sig nals © Nationa l Instrume nts Cor poration 4-21 NI PCI-61 10/611 1 User Manu al the selected edge of TRIG2 is recei ved, the de vice acquires a fix ed number of scans and the acquisition stops. This mode acquires data both before and after recei ving TRIG2.
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-22 ni.com ST ARTSCAN Signal Any PFI pin can receiv e as an inpu t the STARTSCAN signal, which is avai labl e as a n out put on th e PFI7 /STAR TSC AN p in. Re fer to Figu res 4-9 and 4-10 for the relationship of STARTSCAN to the DA Q sequence.
Chapter 4 Connec ting Sig nals © Nationa l Instrume nts Cor poration 4-23 NI PCI-61 10/611 1 User Manu al Figu re 4-16. ST ART SCAN Output Signal T imin g The CONVER T* pulses are masked of f until the dev ice generates the ST AR TSCAN signal.
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-24 ni.com If you are performin g an internall y timed acqu isition, NI-D A Q generates three e xtra point s to clock th e data for you.
Chapter 4 Connec ting Sig nals © Nationa l Instrume nts Cor poration 4-25 NI PCI-61 10/611 1 User Manu al Figur e 4-18. CO NVERT* O utput Signal Timing The ADC switches to hold mo de within 20 ns of the selected edge. This hold-mode d elay time is a fun ction of t emperature and d oes not v ary from one con v ersion to the ne xt.
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-26 ni.com SISOURCE Signal Any PFI pin can receiv e as an input the SISOURCE signal, which is not available as an output o n the I/O connector. The SI2 uses SISOURCE as a clock t o time the gen eration of th e STARTSCAN s ignal.
Chapter 4 Connec ting Sig nals © Nationa l Instrume nts Cor poration 4-27 NI PCI-61 10/611 1 User Manu al Figur e 4-20 sho ws the tim ing for SC ANCLK. Figu re 4-20. SCANC LK Signal Timing EXTSTROBE* Signa l EXTSTROBE* is an output-only signal that generates either a single pulse or a sequence of eight pulses in the hardware- strobe mode.
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-28 ni.com WF TRIG Sig nal Any PFI pin can externally input the WFTRIG signal, which is available as an outp ut on the PFI6/ WFTRIG pin. As an input, WF TRIG is conf igured in the edge-detec tion mo de.
Chapter 4 Connec ting Sig nals © Nationa l Instrume nts Cor poration 4-29 NI PCI-61 10/611 1 User Manu al UPDA TE* Signa l Any PFI pin can externally input the UPDATE* signal, which is available as an outpu t on the P FI5/UPDATE* pin . As an input, UPD A TE* is configured in the edg e-detection mode.
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-30 ni.com The NI PCI -6110/6111U I normall y generates U PD A TE* unless you select some external so urce. The WFTRIG signal starts the UI, and the UI can be stopped b y software or the internal Buf fer Cou nter .
Chapter 4 Connec ting Sig nals © Nationa l Instrume nts Cor poration 4-31 NI PCI-61 10/611 1 User Manu al GPCTR0_SOURCE Sign al Any PFI pin can ext ernally input the GPCTR0_SO URCE signal, whic h is available as an out put on the PFI8/GPCT R0_SOURCE p in.
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-32 ni.com As an out put, GPCTR0_GA TE reflects th e actual g ate signal connected to general-purpose counter 0, e ven if the gate is being e xternally generated by another PFI. Thi s output is set to high-imped ance at startup.
Chapter 4 Connec ting Sig nals © Nationa l Instrume nts Cor poration 4-33 NI PCI-61 10/611 1 User Manu al GPCTR0_UP_DOWN Si gnal This signal can be externally input on the DIO6 pin and is no t available as an output on the I/O connect or.
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-34 ni.com GPCTR1_GA TE Si gnal Any PFI pin can externally input the GPC TR1_GATE signal, which is available as an out put on the PFI4/GPCTR1_ GATE pin. As an in put, GPCTR1_ GA TE is config ured in edge-d etection mode.
Chapter 4 Connec ting Sig nals © Nationa l Instrume nts Cor poration 4-35 NI PCI-61 10/611 1 User Manu al GPCTR1_OUT Sign al This signal is availab le only as an output o n the GPCTR1 _OUT pin. The GPCTR1_O UT signal moni tors the TC of general-pur pose counter 1.
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-36 ni.com Figu re 4-33. GPCT R Tim ing Summa ry The GA TE and OUT signal transitions sho wn in Figure 4-33 are referenced to the rising ed ge of th e SOURCE s ignal. This tim ing diagram as sumes that the coun ters are progr ammed to cou nt rising edges.
Chapter 4 Connec ting Sig nals © Nationa l Instrume nts Cor poration 4-37 NI PCI-61 10/611 1 User Manu al The OUT ou tput timing param eters are ref erenced to the signal at the SOURCE inpu t or to on e of the intern ally generated cl ock signals on the NI PC I-6110/6111 .
Chapter 4 Connec ting Signals NI PCI-6110 /6111 User M anual 4-38 ni.com separate them by a r easonable distance if th ey run in parallel, or run the lines at right angles to each other . • Do not ru n signal lines t hrough condui ts that also cont ain po wer lines.
© Nationa l Instrume nts Cor poration 5-1 NI PCI-61 10/6111 Us er Manu al 5 Calibration This chapter discusses the ca libration pr ocedures for the NI PCI-6110/6111. NI-DAQ includ es calibration functions for performing all of the steps in the calibration process.
Chapter 5 Calibration NI PCI-6110 /6111 User M anual 5-2 ni.com v ary with time and temperature. It is better to self-calibrate when the de vice is installed in the environment in which it is used.
© Nationa l Instrume nts Cor poration A-1 NI PCI-61 10/6111 Us er Manu al A Specifications This appendix lists the sp ecifications of the NI PCI-6110/6111. These specif ications are typical at 25 °C unless otherwise noted . Analog Inpu t Input Characte ristics Number of channels NI PCI-6110.
Appendix A Spec ification s NI PCI-6110 /6111 User Man ual A-2 ni.com FIFO buffer size............... ................. ......8,192 samples Data transfers ........ ................. ........... ......DMA, interrupts, progr ammed I/O DMA modes .... ...
Appendix A Specific ations © Nationa l Instrume nts Cor poration A-3 NI PCI-61 10/6111 Us er Manu al Amplif ier Ch arac teris tics Input impedan ce ACH<0..3>+ to ACH<0..3>– Normal powered o n ................. 1 M Ω in parallel with 10 0 pF Powered off.
Appendix A Spec ification s NI PCI-6110 /6111 User Man ual A-4 ni.com Stabili ty Recommended warm-u p time ...... ...........15 minu tes Offset temperature coeff icient Pregain ...................... ............ ...........±5 µ V/°C Postgain .....
Appendix A Specific ations © Nationa l Instrume nts Cor poration A-5 NI PCI-61 10/6111 Us er Manu al Analog Outp ut Output Chara cteristics Number of channels ................. .............. 2 voltage Resolution .................... ............ ...
Appendix A Spec ification s NI PCI-6110 /6111 User Man ual A-6 ni.com Current dr ive .................... ................. ......±5 mA min Output stability ............................ ...........Any passive load Protection .............. ..........
Appendix A Specific ations © Nationa l Instrume nts Cor poration A-7 NI PCI-61 10/6111 Us er Manu al Digital logic levels Power-on state ... ................. ................. ... Input (high-impedance) Data transfers ..................... .........
Appendix A Spec ification s NI PCI-6110 /6111 User Man ual A-8 ni.com Min source pulse dur ation ............... ......10 ns, edge-detect mode Min gate pulse d uration ................... ......10 ns, edge-detect mode Data transfers ........ .........
Appendix A Specific ations © Nationa l Instrume nts Cor poration A-9 NI PCI-61 10/6111 Us er Manu al Source................ ................. ................. ... All analog input channels, external trigger (PFI0/TRIG1) Level Internal source, ACH<0.
Appendix A Spec ification s NI PCI-6110 /6111 User Man ual A-1 0 ni.com Protection Digital trigger ....................... ...........–0.5 V to (V cc + 0.5) V Analog trigger On/disabled........ ................. ......±35 V Powered off ............
Appendix A Specific ations © Nationa l Instrume nts Cor poration A-11 NI PCI-61 10/611 1 User Manu al Environment al Operating temperature........ ........... ......... 0 to 45 °C Storage temperature ...................... ......... –20 to 70 °C Humidity .
Appendix A Spec ification s NI PCI-6110 /6111 User Man ual A-1 2 ni.com CE Compliance This product meets the ess ential requ irements of applicab le European Directi ves, as amended for CE marking, as follo ws: Low-Voltage Directive (saf ety) ........
© Nationa l Instrume nts Cor poration B-1 NI PCI-61 10/6111 Us er Manu al B Cable Connector Descriptions This append ix describ es the cable co nnectors on the NI PCI -6110/6111. Figur e B-1 sho ws the pin assig nments for t he 68-pin N I PCI-6 110/6111 connector .
Appe ndix B Cab le Co nnector Desc ripti ons NI PCI-6110 /6111 User Man ual B-2 ni.com Figur e B-1. 68- Pin Co nnect or Pin As signm ent f or the NI PCI-6 110/6 111 FREQ_OUT GPCTR0_OUT PFI9/GPCTR0_GAT.
Appendix B Cab le Connec tor Desc riptions © Nationa l Instrume nts Cor poration B-3 NI PCI-61 10/6111 Us er Manu al Figur e B-2. 50- Pin Co nnect or Pin As signm ent f or the NI PCI-6 110/6 111 DIO1.
© Nationa l Instrume nts Cor poration C-1 NI PCI-61 10/6111 Us er Manu al C Common Questions This appendix con tains a list of commonly ask ed questions and answers relating to usage and special features of the NI PCI-6110/6111.
Appendix C Common Questions NI PCI-6110 /6111 User Man ual C-2 ni.com What typ e of 5 V pr otectio n does t he NI PCI-61 10/6111 ha ve? The NI PCI-6110/6111 has 5 V lines equip ped with a self-resetting 1Af u s e .
Appendix C Common Questions © Nationa l Instrume nts Cor poration C-3 NI PCI-61 10/6111 Us er Manu al Analog Input and Output Why i s ther e a mini mum samp ling rate o n the NI PCI-6 110/611 1? The NI PCI -6110/6111 makes us e of a pipelin ed ADC in or der to achie v e its high sampling rates.
Appendix C Common Questions NI PCI-6110 /6111 User Man ual C-4 ni.com 2. Set up acq uisition timin g so t hat the timing signal for A /D conv ersion comes from PFI5, as fo llo ws: • If you are using NI- D A Q, call Select_Signal(deviceNumber, ND_IN_SCAN _START, ND_PFI_5, ND_HIGH_TO_LOW) .
Appendix C Common Questions © Nationa l Instrume nts Cor poration C-5 NI PCI-61 10/6111 Us er Manu al Do the counter/timer applications that I wro te pre viously work with the D A Q-STC? If you are using NI-D A Q with LabVI EW , some applicat ions that were built using the CTR VIs st ill run.
Appendix C Common Questions NI PCI-6110 /6111 User Man ual C-6 ni.com Caution I f you enable a PFI line for o utput, do not connect an y extern al signal source to it. Connecting external sign als to enabled PFI l ines can damage the de vice, the computer , and the conn ected equipment.
© Nationa l Instrume nts Cor poration D-1 NI PCI-61 10/6111 Us er Manu al D T echnical Support and Professional Ser vices Visit the followin g sections of the Nation al Instrument s Web site at ni.
Appendix D T e chnical Support a nd Professional Ser vices NI PCI-6110 /6111 User M anual D-2 ni.com If you s earched ni.com and co uld not f ind t he answers you n eed, contact your local of fice or NI corp orate headquarters. Phone n umbers for our worldwide of fices are listed at the front of this manual.
© Nationa l Instrume nts Cor poration G-1 NI PCI-61 10/6111 Us er Manu al Glossar y l Symbol Pref ix V alue pp i c o 1 0 –1 2 nn a n o 1 0 –9 µ mic ro 10 –6 m milli 10 –3 k kilo 10 3 Mm e g .
Gloss ar y NI PCI-6110 /6111 User M anual G-2 ni.com square ro ot of +5 V +5 VDC source signal A A amperes A/D analog-to-dig ital A C alternating current A CH analog in put channel s ignal A CH0GND an.
Glossary © Nationa l Instrume nts Cor poration G-3 NI PCI-61 10/6111 Us er Manu al C CC e l s i u s CalD A C calibration DA C CH channel—pi n or wire lead to which you apply or from which you read the analog or digital signal. Analog signa ls can be si ngle -end ed or differe ntia l.
Gloss ar y NI PCI-6110 /6111 User M anual G-4 ni.com D D/A digital-to-analog D A C digital-to-analog con v erter—an el ectronic de vice, often an inte grated circuit, that con verts a digital nu mbe.
Glossary © Nationa l Instrume nts Cor poration G-5 NI PCI-61 10/6111 Us er Manu al DOC the Canadian Depar tment of Co mmunications DoC Declaration of Confor mity E edge detection a technique that loc.
Gloss ar y NI PCI-6110 /6111 User M anual G-6 ni.com FIFO fi rst-in fi rst-out memory b uf fer—FIFOs are often us ed on D A Q devices to tempor arily store i ncoming or outgoing data until that data can be read or written. F or example, an analog input FIFO stores the res ults of A/D con v ersions until the data can be read into system memory .
Glossary © Nationa l Instrume nts Cor poration G-7 NI PCI-61 10/6111 Us er Manu al GPCTR1_UP _DO WN general-p urpose cou nter 1 up do wn signal ground an electrically neutral wire that ha s the same .
Gloss ar y NI PCI-6110 /6111 User M anual G-8 ni.com K kHz ki loh ertz L LabVI EW a gra phic al pr ogr ammi ng l angu age LED light emitting diode library a file co ntaining compiled obj ect modules, each compris ed of one of more funct ions, t hat can be l inked t o other o bject modules that mak e use of these functions .
Glossary © Nationa l Instrume nts Cor poration G-9 NI PCI-61 10/6111 Us er Manu al mux multiplexer—a switching de vice with multiple inputs th at sequentially connects each of its inputs to its out.
Gloss ar y NI PCI-6110 /6111 User M anual G-10 ni.com PFI2/CONVE R T* PFI2 /con vert PFI3/GP CTR1_SOURC E PFI3/gen eral-purp ose counter 1 source PFI4/GP CTR1_GA TE PFI4/gen eral-purpose coun ter 1 ga.
Glossary © Nationa l Instrume nts Cor poration G-11 N I PCI-6110/ 6111 Us er Manu al R RAM random acces s memory range the maximum and mi nimum paramet ers between wh ich a sensor , instrument, o r d.
Gloss ar y NI PCI-6110 /6111 User M anual G-12 ni.com scan rate reciprocal of the scan interv al SCANCLK scan clock signal SCSI s mall computer system interf ace— a high-speed, peripheral-connect in.
Glossary © Nationa l Instrume nts Cor poration G-13 N I PCI-6110/ 6111 Us er Manu al thermocouple a temperature sensor created by joining two dissimilar metals ; the junction produces a small voltage.
Gloss ar y NI PCI-6110 /6111 User M anual G-14 ni.com V IH volts, input high V IL volts, input low V in vol t s i n V m measured v oltage V OH vo lts, out put high V OL vo lts, output lo w V ref refer.
© Nationa l Instrume nts Cor poration I-1 N I PCI-6110/ 6111 Use r Manual Index Symbols +5 V signal desc ript ion (ta ble), 4-4 powe r con ne ctio ns, 4 -16 self-resetting fuse, 4-16, C-2 Numerics 50.
Index NI PCI-6110 /6111 User M anual I-2 ni.com anal og ou tput number of channels, 3-4 output rang e, 3-4 quest ions a bo ut, C-3 signal co nnections, 4- 14 specifications dynamic characteristics, A-.
Index © Nationa l Instrume nts Cor poration I-3 N I PCI-6110/ 6111 Use r Manual typical posttriggered acquisition (figur e), 4-18 typical pretriggered acqu isition (figur e), 4-19 counter/timer app l.
Index NI PCI-6110 /6111 User M anual I-4 ni.com driv ers instrument, D-1 software, D-1 dynamic characteristics specifications analog input, A-3 anal og ou tp ut, A- 6 E EEPROM st orage of calib ration.
Index © Nationa l Instrume nts Cor poration I-5 N I PCI-6110/ 6111 Use r Manual GPCTR1_OUT signal desc ript ion (ta ble), 4-5 general-p urpose counter timi ng summary (figur e), 4-36 general-p urpose.
Index NI PCI-6110 /6111 User M anual I-6 ni.com K KnowledgeBase, D-1 L LabVIEW appli cation softwar e, 1-3 loading calib ration constant s, 5-1 lowValue, 3-5, 3-6, 3 -7 M manual. See documentation MAX configu ration instr uctions, 2-2 quest ions a bo ut, C-2 Measurement & Auto mation Explorer.
Index © Nationa l Instrume nts Cor poration I-7 N I PCI-6110/ 6111 Use r Manual PFI2/C ONVERT* si gnal See also CONVERT * signal desc ript ion (ta ble), 4-5 signal s ummary (table ), 4-6 PFI3/GP CTR1.
Index NI PCI-6110 /6111 User M anual I-8 ni.com R Real-Time System Integration . See RTSI related documentation, xi requirem ents for getti ng started, 1-2 RTSI bus over vie w, 1 -1 signal co nnection.
Index © Nationa l Instrume nts Cor poration I-9 N I PCI-6110/ 6111 Use r Manual waveform generation tim ing connections over vie w, 4 -27 UISOURCE signal, 4-30 UPDATE* s ignal, 4-29 WFTRIG si gnal, 4.
Index NI PCI-6110 /6111 User M anual I-10 ni.com EXTSTROBE* sign al, 4-27 over vie w, 4 -18 SCANCLK si gnal, 4- 26 SISOURCE signal , 4-26 STARTSCAN signal, 4-22 TRIG1 si gnal, 4-19 TRIG2 si gnal, 4-20.
Index © Nationa l Instrume nts Cor poration I-11 NI PCI-61 10/6111 Us er Manu al W waveform generation timin g connections over vie w, 4 -27 quest ions a bo ut, C-3 UISOURCE signal, 4-30 UPDATE* si g.
Ein wichtiger Punkt beim Kauf des Geräts National Instruments NI PCI-6111 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie National Instruments NI PCI-6111 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für National Instruments NI PCI-6111 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von National Instruments NI PCI-6111 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über National Instruments NI PCI-6111 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon National Instruments NI PCI-6111 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von National Instruments NI PCI-6111 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit National Instruments NI PCI-6111. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei National Instruments NI PCI-6111 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
