Benutzeranleitung / Produktwartung BA des Produzenten Multiquip
Zur Seite of 120
OPERA TION AND PAR TS MANUAL P/N 20905 THIS MANU AL MUST A CCOMP ANY THE EQ UIPMENT A T ALL TIMES. T o find the latest revision of this publication, visit our website at: www .
Engine exhaust and some of its constituents, and some dust created of California to cause cancer , birth defects and other repr oductive harm. by power sanding, sawing, grinding, drilling and other construction activities contains chemicals kno wn to the State Some examples of these c hemicals are: Lead from lead-based paints.
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 3.
P A GE 4 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) BA-SERIES TROWEL— TABLE OF CONTENTS Here's How T o Get Help ............................................ 3 T ab le Of Contents ................
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 5 BA-SERIES TROWEL— PARTS ORDERING PROCEDURES www .multiquip .
P A GE 6 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) TRAINING CHECKLIST This checklist will lists some of the minimum requirements for machine maintenance and operation. Please feel free to detach it and make copies.
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 7 D AIL Y PRE-OPERA TION CHECKLIST COMMENTS: BA-SERIES TROWEL— DAILY PRE-OPERATION CHECKLIST T S I L K C E H C N O I T A R E P O - E R P Y L I A D 1 . l e v e L l i O e n i g n E 2 .
P A GE 8 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) BA-SERIES TROWEL— SAFETY MESSAGE ALERT SYMBOLS Safety precautions should be followed at all times when operating this equipment.
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 9 Accidental Starting AL W A YS place the engine ON/OFF switch in the OFF position, when the trowel is not in use. Over Speed Conditions NEVER tamper with the factory settings of the engine gov er nor or settings.
P A GE 10 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) CA UTION: F ailure to follo w instructions in this manual ma y lead to serious injur y or e v en death! This equipment is to be operated by trained and qualified personnel only! This equipment is f or industr ial use only .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 11 BA-SERIES TROWEL— RULES FOR SAFE OPERATION ■ DO NOT operate this trowel unless all guards and safety devices are attached and in place. See Pages 16 and 17.
P A GE 12 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) BA-SERIES TROWEL— OPERATION AND SAFETY DECALS Machine Safety Decals The BA-Series walk-behind trowel is equipped with a number of safety decals. These decals are provided for operator safety and maintenance information.
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 13 BA-SERIES TROWEL— SPECIFICATIONS (TROWEL) NOTE: 1 . Sound pressure is a weighted measure.
P A GE 14 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) BA-SERIES TROWEL— SPECIFICATIONS (ENGINES) ) s t h g i e W l e w o r T ( s n o i t a c i f i c e p S . 3 e l b a T L E D O ME C R U O S R E W O PT H G I E W G N I T A R E P OT H G I E W G N I P P I H S H 8 - 3 - Ba d n o H P H 8) .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 15 BA-SERIES TROWEL— GENERAL INFORMATION BA-Series Walk-Behind Trowel Familiarization This walk-behind trowel is designed for the floating and finishing of concrete slabs.
P A GE 16 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) BA-SERIES TROWEL— CONTROLS AND COMPONENTS Figure 3.
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 17 Figures 3 shows the location of the basic controls or components, for the BA-Series trowel. Listed below is a brief explanation of each control or component 1 .
P A GE 18 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) Figure 4. Engine Controls and Components INITIAL SER VICING The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation.
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 19 BA-SERIES TROWEL — ASSEMBLY AND INSTALLATION Assembly and Installation Before the trowel can be put into operation there are some components that must be installed before the trowel can be used.
P A GE 20 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) Handle Height Adjustment If handle height adjustment is desired, a handle wedge kit can be purchased for your trowel by ordering P/N 2576 from your Multiquip dealer .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 21 BA-SERIES TROWEL — ASSEMBLY AND INSTALLATION Pre-load Adjustment (Quick-Pitch™ Models Only) 1 . After the Quick-Pitch™ handle has been installed on the trowel, spring pre-load adjustment will be required.
P A GE 22 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) CAUTION CAUTION CAUTION CAUTION CAUTION NEVER operate the trowel in a confined area or enclosed area structure that does not provide ample free flow of air .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 23 BA-SERIES TROWEL— PRE-INSPECTION Fuel Check Motor fuels are highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling. DO NOT attempt to refuel the trowel if the engine is hot! or running .
P A GE 24 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) B A-SERIES TR O WEL — INITIAL ST ART -UP This section is intended to assist the operator with the initial start-up of the walk-behind trowel.
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 25 NEVER disable or disconnect the centrifugal kill switch. It is provided for the operators’ safety and injury may result if it is disabled, disconnected or improperly maintained.
P A GE 26 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) BA-SERIES TROWEL — OPERATION Pitching The Blades Quick Pitch Handle 1 . T o pitch the b lades upwards using the "Quic k-Pitch ™" T -handle , (Figure 28) simply squeeze the trigger lock and pull the T -handle tow ards the operator .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 27 BA-SERIES TROWEL — OPERATION Figure 31. Maneuvering The T r owel Figure 32 below illustrates a typical walk-behind trowel application. Practice maneuv ering the trowel.
P A GE 28 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) Blades Blades are a vital par t of finishing concrete. This trowel, or finisher , has been designed to finish concrete and the b lades are built to stringent quality standards out of the finest trowel steel.
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 29 T ro wel Arm Adjustment T ool If blades show uneven wear patterns or some tend to wear out faster than others, the trowel arms may need to be adjusted. Whiteman makes a special tool (Figure 38) that will adjust all of the trow el ar ms consistently .
P A GE 30 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) Figure 39. W orn Spider Plate T rowel Arm Adjustment Pr ocedure NOTE The following procedure should be followed to adjust trowel arms when it becomes apparent that the trowel is finishing poorly or in need of routine maintenance.
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 31 BA-SERIES TROWEL — MAINTENANCE ■ Does the trowel have a perceived rolling or bouncing motion when in use? ■ Look at the trowel while it is running, does the guard ring “rock up and down” relative to the ground? 2.
P A GE 32 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) T ro wel Arm Flatness T est 1 . Using a piece of 3/4 inch thick steel plate or any surface which is true and flat , check all six sides of each trowel arm for flatness.
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 33 T ro wel Arm Adjustment Shown in Figure 47 is the adjustment fixture with a trowel arm inserted. As each trowel arm is locked into the fixture, the arm bolt is adjusted to where it contacts a stop on the fixture.
P A GE 34 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) Figure 48. Hand Clutch Adjustment 11 . Carefully lift the upper tr owel assembl y , line up the k e y- wa y on gear bo x main shaft and inser t into spider assemb ly .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 35 BA-SERIES TROWEL — TROUBLESHOOTING (TROWEL) G N I T O O H S E L B U O R T . 6 E L B A T M O T P M Y S M E L B O R P E L B I S S O P N O I T U L O S t a t o n r o h g u o r g n i n n u r e n i g n E .
P A GE 36 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) BA-SERIES TROWEL — TROUBLESHOOTING (TROWEL) ) D E U N I T N O C ( G N I T O O H S E L B U O R T .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 37 BA-SERIES TROWEL — TROUBLESHOOTING (ENGINE) ) E N I G N E ( G N I T O O H S E L B U O R T . 7 E L B A T M O T P M Y SE S U A C E L B I S S O PN O I T U L O S o n t u b , e l b a l i a v a s i l e u f " , t r a t s o t t l u c i f f i D .
P A GE 38 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) B A-SERIES TR O WEL — EXPLANA TION OF CODES IN REMARKS COLUMN The f ollowing section e xplains the diff erent symbols and remarks used in the P ar ts section of this manual.
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 39 B A-SERIES TRO WEL 1 T O 3 UNITS WITH HOND A GX240K1QA2ENGINE. 1 to 3 Units Qty . ........ P/N .............................. D escription 2 ............ 20856 .
P A GE 40 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) BA-SERIES TROWEL — NAMEPLATE AND DECALS F IN IS H FINISH J C O M B O COMBO P R E L O A D T R I M.
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 41 BA-SERIES TROWEL — NAMEPLATE AND DECALS NAMEPLA TE AND DECALS NO .
P A GE 42 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) B A-SERIES TR O WEL — ST AND ARD HANDLE ASSY . ST AND ARD HANDLE ASSY . 1 1 2 3 4 10 9 5 40 6 7 8 11 12 12 13 27 15 17 16 18 19 43 42 44 20 21 22 25 30 41 31 32 33 28 26 29 23 24 39 34 14 2 3 1 P ART OF ENGINE ASSEMBL Y .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 43 B A-SERIES TRO WEL — ST AND ARD HANDLE ASSY . ST AND ARD HANDLE ASSY .
P A GE 44 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) B A-SERIES TRO WEL — QUICK-PITCH™ HANDLE ASSY . QUICK-PITCH ™ T -HANDLE 1 2 3 3 2 1 P ART OF ENGINE ASSEMBL Y . APPL Y THREAD LOCK (LOCTITE 242 BLUE OR EQUIV ALENT).
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 45 B A-SERIES TRO WEL — QUICK-PITCH™ HANDLE ASSY . QUICK-PITCH HANDLE NO .
P A GE 46 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) B A-SERIES TRO WEL — QUICK PITCH™ HANDLE ASSY . QUICK PITCH HANDLE 1 2 3 3 2 1 P ART OF ENGINE ASSEMBL Y . APPL Y THREAD LOCK (LOCTITE 242 BLUE OR EQUIV ALENT).
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 47 QUICK PITCH HANDLE NO . P AR T NO . P AR T NAME QTY . REMARKS 41 1736 DECAL, ARROW 1 42 1718 N U T , Q P .
P A GE 48 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) B A-SERIES TRO WEL — THR UST BEARING KIT ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 49 THR UST BEARING KIT ASSEMBL Y . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 * 12208 WEAR RING 1 2 * 12778 FLANGE BEARING 1 3 * 10793 T HR UST COLLAR W/BUSHING 1 4 * 1471 BU S HI NG 1 5 * 1154A LO WER WEAR PLA TE 1 6 10968 T HRU ST BEARING KIT .
P A GE 50 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) B A-SERIES TRO WEL — 4-BLADE SPIDER ASSY . 4 BLADE SPIDER ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 51 4 BLADE SPIDER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 * 12208 WEAR RING 1 2 * 12778 FLANGE BEARING 1 3 * 10793 TH R UST COLLAR ................
P A GE 52 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) B A-SERIES TRO WEL — GEARBO X AND ENGINE MOUNTS ASSY . 1 2 6 3 4 5 1 2 3 4 5 6 6 7 7 9 10 11 12 16 17 18 18 19 19 20 21 22 23 24 30 31 31 40 41 43 32 32 33 38 39 35 37 36 34 25 26 29 27 28 13 14 15 8 3 2 1 4 5 6 TORQUE T O 15 LB/FT .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 53 B A-SERIES TR O WEL — GEARBO X AND ENGINE MOUNTS ASSY .
P A GE 54 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) B A-SERIES TRO WEL — GEARBO X AND ENGINE MOUNTS ASSY . 1 2 6 3 4 5 1 2 3 4 5 6 6 7 7 9 10 11 12 16 17 18 18 19 19 20 21 22 23 24 30 31 31 40 41 43 32 32 33 38 39 35 37 36 34 25 26 29 27 28 13 14 15 8 3 2 1 4 5 6 TORQUE T O 15 LB/FT .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 55 GEARBO X AND ENGINE MOUNTS ASSY . NO . P AR T NO . P AR T NAME QTY .
P A GE 56 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) B A-SERIES TRO WEL — ENGINES, HOND A, ROBIN, BRIGGS & STRA TT ON ENGINES , 8 HP HOND A, 8 HP R OBIN, & 8 HP BRIGGS AND STRA TT ON ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 57 ENGINES , 8 HP HOND A, 8 HP ROBIN, & 8 HP BRIGGS AND STRA TT ON ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 1387 ENGI NE 8HP HONDA 1 1 20469 ENGINE 8HP BRIGGS & STRA TT ON 1 1 1256 ENGINE 8HP ROBIN 1 2 0310 SQUARE KEY 1/4X1/4X1.
P A GE 58 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) B A-SERIES TRO WEL — HAND CLUTCH ASSY . HAND CLUTCH ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 59 HAND CLUTCH ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 1387 ENGINE DRIVE ASSY . 8 HP HOND A 1 2 10036 CLUTCH ASSIST HANDLE ASSY . 1 3 6014C HEX FINISH NUT 5/16-24 1 4 0300B FLA T W ASHER 5/16” 5 5 10181 SCREW , HHC 5/16-24X1.
P A GE 60 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) B A-SERIES TRO WEL — GU ARD RING ASSY . GU ARD RING ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 61 B A-SERIES TR O WEL — GU ARD RING ASSY . GU ARD RING ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 20797 ST A T IONAR Y GU ARD RING 1 2 1489 SPIDER PLA TE ASSY 16-1/2" ARM (EXT) .
P A GE 62 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) B A-SERIES TRO WEL — ST ABILIZER RING ASSY . ST ABILIZER RING ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 63 ST ABILIZER RING ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 0161C W ASHER, LOCK, 5/16 MED 4 2 1237 SCREW , SCH 5/16-18 X 7/8, NYL, NP 4 3 1723 ROD END , 5/16-24 MALE 4 4 6014C NUT , HEX FINISH 5/16-24 8 5 1482 RING, ST ABILIZER, 14-1/2 " ARM .
P A GE 64 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) B A-SERIES TRO WEL — BLADES & ADJUSTMENT FIXTURE ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 65 B A-SERIES TR O WEL — BLADES & ADJUSTMENT FIXTURE ASSY . BLADES & ADJUSTMENT FIXTURE ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 20 COMBO FLO A T & FINISH BLADE .
P A GE 66 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) B A-SERIES TRO WEL — LIFTING B ALE ASSY . (OPTION) LIFTING BALE ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 67 LIFTING BALE ASSY . (OPTION) NO . P AR T NO . P AR T NAME QTY . REMARKS 1 LIFTING BALE ASSY . ................................. 1 ............. CONT A CT UNI T SALES DEPT .
P A GE 68 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) AIR CLEANER ASSY . HOND A GX240K1QA2 ENGINE — AIR CLEANER ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 69 AIR CLEANER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 16271ZE2000 GASKET , ELBO W 1 2 17210ZE2822 ELEMENT , AIR CLEANER, DU AL ............. 1 ...
P A GE 70 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) CAMSHAFT ASSY . HOND A GX240K1QA2 ENGINE — CAMSHAFT ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 71 HOND A GX240K1QA2 ENGINE — CAMSHAFT ASSY . CAMSHAFT ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 14100ZE2W01 CA MS HA FT AS SY . ..................
P A GE 72 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) CARBURET OR ASSY . HOND A GX240K1QA2 ENGINE — CARBURET OR ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 73 CARBURET OR ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 * % + 16010ZE2812 GASKET SET 1 2 * 16011Z.
P A GE 74 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) CONTR OL ASSY . HOND A GX240K1QA2 ENGINE — CONTR OL ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 75 HOND A GX240K1QA2 ENGINE — CONTR OL ASSY . CONTR OL ASSY .
P A GE 76 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) CRANKCASE CO VER ASSY . HOND A GX240K1QA2 ENGINE — CRANKCASE CO VER ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 77 CRANKCASE CO VER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 2 11400ZE2601 CO VER ASSY ., CRANKCASE .................. 1 ............. INCLUDES ITEMS W/ * 3 11381ZE2801 GASKET , CASE CO VER 1 4 15600ZG4003 CAP ASSY .
P A GE 78 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) HOND A GX240K1QA2 ENGINE — CRANKSHAFT ASSY . CRANKSHAFT ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 79 CRANKSHAFT ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 2 13320ZE2601 CRANKSHAFT COMP ., Q- TYPE .............. 1 ............. INCLUDES ITEMS W/ * 8 13351ZE2010 WEIGHT , BALANCER 1 1 0 90745ZE2600 KEY 6.
P A GE 80 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) HOND A GX240K1QA2 ENGINE — CYLINDER B ARREL ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 81 CYLINDER BARREL ASSY . NO . P AR T NO . P AR T NAME QTY .
P A GE 82 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) HOND A GX240K1QA2 ENGINE — CYLINDER HEAD ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 83 CYLINDER HEAD ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 12200ZH9000 CYLINDER HEAD COMP . ....................................... 1 .......... INCLUDES ITEMS W/ * 2 * 12204ZE2306 GUIDE, V AL VE, OS , OPTIONAL 1 3 * 12205ZE2305 GUIDE, EX.
P A GE 84 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) HOND A GX240K1QA2ENGINE — F AN CO VER ASSY . F AN CO VER ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 85 F AN CO VER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 16731ZE2003 CLIP , TUBE 1 2 19610ZE2010ZC CO VER COMP ., F AN *NH1* BLA CK 1 3 19631ZE2D00 SHROUD 1 4 32197ZH8003 SUB-HARNESS 1 5 36100ZH7003 SWITCH ASSY .
P A GE 86 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) HOND A GX240K1QA2 ENGINE — FL YWHEEL ASSY . FL YWHEEL ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 87 FL YWHEEL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 19511ZE2000 F AN, COOLING 1 2 28450ZE2W11 PULLEY COMP ., ST AR TER, SCREEN GRID 1 4 31100ZE2010 FL YWHEEL COMP .
P A GE 88 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) HOND A GX240K1QA2ENGINE — FUEL T ANK ASSY . FUEL T ANK ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 89 FUEL T ANK ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 16854ZH8000 R U BB ER S UP PO R TER 107MM 1 2 16955ZE1000 JOINT , FUEL T ANK 1 3 17510ZE2020ZD T ANK COMP .
P A GE 90 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) IGNITION COIL ASSY . HOND A GX240K1QA2 ENGINE — IGNITION COIL ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 91 IGNITION COIL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 30500ZE2023 COIL ASSY .
P A GE 92 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) MUFFLER ASSY . HOND A GX240K1QA2 ENGINE — MUFFLER ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 93 MUFFLER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 18310ZE2W00 MUFFLER COMP . 1 2 18320ZE2W01 PRO TE CTOR COMP ., MUFFLER 1 3 18323ZE2W00 PRO TE CT OR, EX.
P A GE 94 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) PIST ON ASSY . HOND A GX240K1QA2 ENGINE — PIST ON ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 95 PIST ON ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 13010ZE2013 RING SET , PIST ON, STD . 1 1 13011ZE2013 RING SET , PIST ON, OS 0.25, OPTIONAL 1 1 13012ZE2013 RING SET , PIST ON, OS 0.
P A GE 96 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) RECOIL ST AR TER ASSY . HOND A GX240K1QA2 ENGINE — RECOIL ST ARTER ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 97 RECOIL ST AR TER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 28400ZE2W01ZB ST A R TER ASSY ., RECOIL *NH1*, BLA CK ................... 1 ....... INCLUDES ITEMS W/ * 2 * 28410ZE2W01ZB CASE COMP .
P A GE 98 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) LABELS HOND A GX240K1QA2 ENGINE — LABELS.
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 99 LABELS NO . P AR T NO . P AR T NAME QTY . REMARKS 1 87521ZE2W01 EMBLEM, INTERNAL 1 3 87522ZH9000 LABEL, C.
P A GE 100 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) R OBIN EH25-2 ENGINE — CRANKCASE ASSY . CRANKCASE ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 101 R OBIN EH25-2 ENGINE — CRANKCASE ASSY . CRANKCASE ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 10 2541010131 CRANKCASE CP ..........................
P A GE 102 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) R OBIN EH25-2 ENGINE — CRANKSHAFT ASSY . CRANKSHAFT ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 103 R OBIN EH25-2 ENGINE — CRANKSHAFT ASSY . CRANKSHAFT ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 10 2542090101 CRANKSHAFT CP .......................
P A GE 104 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) R OBIN EH25-2 ENGINE — INT AKE AND EXHA UST ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 105 R OBIN EH25-2 ENGINE — INT AKE AND EXHA UST ASSY . INT AKE AND EXHA UST ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 10 2543170141 CAMSHAFT CP .....
P A GE 106 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) R OBIN EH25-2 ENGINE — GO VERNOR ASSY . GO VERNOR ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 107 R OBIN EH25-2 ENGINE — GO VERNOR ASSY . GO VERNOR ASSY .
P A GE 108 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) R OBIN EH25-2 ENGINE — COOLING AND ST AR TING ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 109 R OBIN EH25-2 ENGINE — COOLING AND ST AR TING ASSY . COOLING AND ST AR TING ASSY .
P A GE 110 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) R OBIN EH25-2 ENGINE — FUEL T ANK ASSY . FUEL T ANK ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 111 R OBIN EH25-2 ENGINE — FUEL T ANK ASSY . FUEL T ANK ASSY .
P A GE 112 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) R OBIN EH25-2 ENGINE — CARBURET OR ASSY . CARBURET OR ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 113 R OBIN EH25-2 ENGINE — CARB URET OR ASSY . CARBURET OR ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 210 2546252300 CARB URET OR ASSY . CYCLONE, A/C .
P A GE 114 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) R OBIN EH25-2 ENGINE — FL YWHEEL AND IGNITION ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 115 FL YWHEEL AND IGNITION ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 10 2347020111 FL YWHEEL CP 1 11 2547943021 IGNITION COIL CP 1 30 0011406250 BO L T AND W ASHER ASSY .
P A GE 116 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) R OBIN EH25-2 ENGINE — OIL SENSOR ASSY . OIL SENSOR ASSY .
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 117 R OBIN EH25-2 ENGINE — OIL SENSOR ASSY . OIL SENSOR ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 7 0 0 KS3 110 28 01 OIL SENSOR CP 19 ..............
P A GE 118 — BA-SERIES W ALK-BEHIND TRO WEL— OPERA TION AND P ARTS MANU AL — REV . #6 (07/06/10) TERMS AND CONDITIONS OF SALE — P AR TS P A YMENT TERM S T erms of payment for parts are net 3 0 days. FREIGHT P OLIC Y All parts orders will be shipped collect or prepaid with the c harges added to t he inv oice.
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 119 NO TE P A GE.
OPERA TION AND PAR TS MANUAL Y our Local Dealer is: HERE’S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2010, MUL TIQUIP INC . Multiquip Inc, the MQ logo and the Whiteman logo are registered trademar ks of Multiquip Inc.
Ein wichtiger Punkt beim Kauf des Geräts Multiquip BA (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Multiquip BA noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Multiquip BA - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Multiquip BA reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Multiquip BA erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Multiquip BA besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Multiquip BA verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Multiquip BA. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Multiquip BA gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
