Benutzeranleitung / Produktwartung MT5634ZPX-V.92-ISA des Produzenten Multi-Tech Systems
Zur Seite of 47
MultiModem ® ZPX MT5634ZPX-V .92-ISA Internal ISAData / F ax Modem User Guide.
MultiModemZPX User Guide MT5634ZPX-V.92-ISA P/N S000372D Revision D All rights reserved. This publication may not be reproduced, in whole or in part, without prior ex- pressed written permission from Multi-Tech Systems, Inc. Copyright © 2007 - 2009 by Multi-Tech Systems, Inc.
Contents MultiModemZPX User Guide iii Contents Chapter 1 - Introduction ....................................................................................................... ... 5 Product Description .................................................
Contents MultiModemZPX User Guide iv Canadian Limitations Notice .................................................................................................... ........ 31 Industry Canada .........................................................
1 Introduction 5 MultiModemZPX User Guide Chapter 1 - Intr oduction Congratulations on y our purchase of the MultiModem ® ZPX. Y ou hav e acquired one of the finest internal data/f ax modems availab le today from one of the world’ s oldest modem manuf acturers: Multi-T ech Systems, Inc.
1 Introduction 6 MultiModemZPX User Guide General features • Compliance with major ITU-T, TIA, and EIA international standards to ensure compatibility with other modems • Distinguishes data and fax calls • Compliance with the V.80 standard, allowing video conferencing over analog telephone lines with any H.
1 Introduction 7 MultiModemZPX User Guide Man ual Organization This User Guide will help y ou to install, configure, use, and troubleshoot your modem. The man ual is divided into fiv e chapters and f our appendices: Chapter 1: Introduction. This chapter Introduces the MT5634ZPX, briefly descr ibing features and technical specifications .
1 Introduction 8 MultiModemZPX User Guide T e c hnical Specifications Trade Name MultiModemZPX Model Number MT5634ZPX Server-to-Client V.90 speeds when accessing a V.90 or V.92 server (actual Data Rates speed depends on server capabilities and line conditions) * Client-to-Server Up to 50Kbps when accessing a V.
1 Introduction 9 MultiModemZPX User Guide Command Buffer 40 Characters Transmission Level -11 dBm (North America and Pan Euro) - varies by country setting Frequency Stability ±0.
2 Installation 10 MultiModemZPX User Guide Chapter 2 - Installation What Y ou Will Need Bef ore star ting, please make sure y ou ha v e ev erything you need: W e supply • An MT5634ZPX-V92 data/fax m.
2 Installation 11 MultiModemZPX User Guide Step 1 - Determine System Resour ces Bef ore you ph ysically install your new MultiModemZPX, y ou need to deter mine what system resources are in use on your system. The best w a y to check what resources are in use and which ones are av ailab le, run WINMSD Utility .
2 Installation 12 MultiModemZPX User Guide 4. Click on IRQs to display the used IRQs. The MultiModemZPX only uses IRQs 3,4,and 5 so you need to check in the above screen to see if any of these IRQs are available. The MultiModemZPX is defaulted to IRQ 5.
2 Installation 13 MultiModemZPX User Guide 6. Now, click on I/O to display the available I/O addresses. 7. The MultiModemZPX uses the following I/O addresses: COM1: 3F8-3FF COM2: 2F8-2FF COM3: 3E8-3EF COM4: 2E8-2EF and is defaulted to COM 4. 8. Record the available I/O address that you are going to use _______.
2 Installation 14 MultiModemZPX User Guide Step 2 - Configure J umpers The MT5634ZPX board contains se ven Berg jumpers f or setting the interr upt request (IRQ) number and COM port assignment. The jumpers are located on the lower part of the PC board as shown below .
2 Installation 15 MultiModemZPX User Guide Step 4 - Run Ad d Hard ware Wizar d 1. Click on Start I Control Panel I Add Hardware and the Add Hardware Wizard screen is dis- played. 2. Click on the Next button on the Add Hardware Wizard screen. The wizard will pause a few seconds trying to detect the new device.
2 Installation 16 MultiModemZPX User Guide Step 5 - Run Add Modem Wizar d 1. Place the MT5634ZPX-V92 CD in the CDROM drive and allow time for the CD to spin up. The MT5634ZPX-V92 AutoRun screen will appear. 2. Click on Start I Control Panel I Phone and Modem Options.
2 Installation 17 MultiModemZPX User Guide Step 7 - Connect Y our Modem to the T elephone Line The MultiModemZPX communicates over pub lic-switched telephone netw ork lines. Use the modular telephone cab le provided with the modem to connect the MultiModemZPX to y our telephone wall jack.
2 Installation 18 MultiModemZPX User Guide Step 8: Configure the Modem f or Y our Country Before you use your modem, you must configure it for the country in which it will be used. You must also do this if you move the modem to another country after it has been configured for the first country.
3 Using Your Modem 19 MultiModemZPX User Guide Chapter 3 - Using Y our Modem Operating Y our MultiModemZPX If y ou’ re an experienced modem user , y ou ma y only want to chec k your modem’ s settings f or data compression, error correction, and so on.
3 Using Your Modem 20 MultiModemZPX User Guide 3. Save the file as ZPXTest.doc and exit WordPad . 4. Click Start | Programs | Accessories | Fax | Compose New Fax .
3 Using Your Modem 21 MultiModemZPX User Guide Setup Multi-T ech modems are shipped with a default setup pass word (MTSMODEM). F or security measures, you should change the pass word. As an added security measure, also change the remote configuration escape character .
4 AT Commands and Fax Commands 22 MultiModemZPX User Guide Chapter 4 - A T Commands A complete A T Commands, S-Registers, and Result Codes Reference Guide can be f ound on the MT5634ZPX-V92 CD and on the Multi-T ech W eb site. F ax Commands F ax commands resemb le A T commands, b ut are more complicated to use.
5 Troubleshooting 23 MultiModemZPX User Guide Chapter 5 - T r oubleshooting This chapter describes common problems y ou ma y ha v e with your modem and ho w to solve them.
5 Troubleshooting 24 MultiModemZPX User Guide remain connected until the program terminates. Some programs can disconnect without exiting the program. If this is the case, try issuing the software’s connection command. If more than one communications program is open, they may conflict with each other.
5 Troubleshooting 25 MultiModemZPX User Guide • If the modem reports BUSY , the other number may be busy. Try again later. BUSY also may indicate that 9 was not added to the phone number (if required to dial 9 for an outside line).
5 Troubleshooting 26 MultiModemZPX User Guide • If you were online with a commercial online service, it may have hung up because of lack of activity on your part or because you exceeded your time limit for the day. Try increasing the length of time in minutes the modem will wait before disconnecting when no data is sent or received.
Appendix A - Regulatory Compliance 27 MultiModemZPX User Guide Appendix A - Regulator y Compliance FCC P ar t 68 T elecom 1. This equipment complies with part 68 of the Federal Communications Commission Rules. On the outside surface of this equipment is a label that contains, among other information, the FCC registration number.
Appendix A - Regulatory Compliance 28 MultiModemZPX User Guide FCC P ar t 15 This equipment has been tested and f ound to comply with the limits f or a Class B digital device , pursuant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonab le protection against harmful interf erence in a residential installation.
Appendix A - Regulatory Compliance 29 MultiModemZPX User Guide Notice: The Industry Canada label identifies certificated equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements.
Appendix A - Regulatory Compliance 30 MultiModemZPX User Guide Ne w Zealand T elecom W arning Notice (1) The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network.
Appendix B - Updating Your Modem Firmware 31 MultiModemZPX User Guide Appendix B - Updating Y our Modem’ s Firmware Intr oduction Y our modem is controlled b y semi-per manent software , called fir mw are, which is stored in flash memory . Firmware is nonv olatile; that is, it remains stored in memor y when the modem is tur ned off .
Appendix B - Updating Your Modem Firmware 32 MultiModemZPX User Guide 4. If the current firmware version is greater than the firmware version number found in Step 1: Identify the Modem Firmware , your modem has an older firmware version. Continue with Step 3: Download the Upgrade File .
Appendix B - Updating Your Modem Firmware 33 MultiModemZPX User Guide Click Start | Settings | Control Panel , then double-click Services . Select Remote Access Server and click Startup... . Select Manual as the Start Up Type and click OK . If you are using a Fax service in NT, change its Start Up Type to Manual .
Appendix C - ASCII Conversion Chart 34 MultiModemZPX User Guide Appendix C - ASCII Con ver sion Char t CTRL CODE HEX DEC CODE HEX DEC CODE HEX D EC CODE HEX DEC @ NUL 00 0 SP 20 32 @ 40 64 ` 60 96 A S.
Appendix D - WEEE 35 MultiModemZPX User Guide Appendix D – W aste Electrical and Electronic Equipment (WEEE) The WEEE directive places an obligation on manufacturers, distributors and retailers to take-back electronics products at the end of their useful life.
Glossary 36 MultiModemZPX User Guide A Analog signal: A wa vef or m which has amplitude, frequency and phase, and which takes on a r ange of v alues between its maximum and minimum points. Analog T ransmission: One of two types of telecommunications which uses an analog signal as a carrier of voice, data, video , etc.
Glossary 37 MultiModemZPX User Guide business P ABX or any residential phone connects to the PSTN at a central office. Centre x: A multi-line ser vice offered by oper ating telcos which provides, from the telco CO , functions and f eatures comparab le to those of a PBX for large business users .
Glossary 38 MultiModemZPX User Guide Serial Bus. The De vice Address is the Def ault Address when the Universal Serial Bus device is first po wered or reset.
Glossary 39 MultiModemZPX User Guide Fax (facsimile): Refers to the bit-mapped rendition of a graphics-oriented document (f ax) or to the electronic transmission of the image over telephone lines (f axing).
Glossary 40 MultiModemZPX User Guide request attention from a host. The host typically invokes an interrupt service routine to handle the condition which caused the request. I/O Addresses: Locations within the I/O address space of your computer used by a device, such as an expansion card, a serial port, or an inter nal modem.
Glossary 41 MultiModemZPX User Guide Megacom: An A T&T ser vice with a nor mal W A TS line (typically T1) between the customer premise and the A T&T ser ving class 4 CO are the customer’ s responibility . MegaLink: BellSouth’ s leased T1 service.
Glossary 42 MultiModemZPX User Guide link stations) associated with a node, as requested b y an SSCP via an SSCP-PU session. An SSCP activ ates a session with the physical unit in order to indirectly manage , through the PU , resources of the node such as attached links.
Glossary 43 MultiModemZPX User Guide S Serial P ort: The connector on a PC used to attach ser ial devices (those that need to receiv e data one bit after another), such as a mouse, a pr inter or a modem. This consists of a 9- or 25-pin connector that sends data in sequence (bit by bit).
Glossary 44 MultiModemZPX User Guide f acility into two or more channels by allotting the common channel to sev eral diff erent inf or mation channels, one at a time. Time Slot: One of 24 channels within a T1 line. Each channel has a 64 Kbps maximum bandwidth.
Glossary 45 MultiModemZPX User Guide V .54: The ITU-T standard for local and remote loopback tests in modems, DCEs and DTEs. The four basic tests are: • local digital loopback (tests DTE send and re.
Index 46 Inde x Symbols 11-bit operation ................................................. 5 33.6K bps ......................................................... 5 A adaptive ans w e r ................................................ 5 ASCII Conv ersion Char t .
Index 47 V V .1 7 .................................................................. 8 V .2 2 .................................................................. 8 V .22bis .............................................................. 8 V .27ter .....
Ein wichtiger Punkt beim Kauf des Geräts Multi-Tech Systems MT5634ZPX-V.92-ISA (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Multi-Tech Systems MT5634ZPX-V.92-ISA noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Multi-Tech Systems MT5634ZPX-V.92-ISA - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Multi-Tech Systems MT5634ZPX-V.92-ISA reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Multi-Tech Systems MT5634ZPX-V.92-ISA erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Multi-Tech Systems MT5634ZPX-V.92-ISA besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Multi-Tech Systems MT5634ZPX-V.92-ISA verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Multi-Tech Systems MT5634ZPX-V.92-ISA. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Multi-Tech Systems MT5634ZPX-V.92-ISA gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
