Benutzeranleitung / Produktwartung DE-211 des Produzenten Moxa Technologies
Zur Seite of 35
NPort Express Hardware Inst allation Guide Sixth Edition, May 2006 Moxa Technologies Co., Ltd. Tel: +886-2-8919-1230 Fax: +886-2-8919-1231 www.moxa.com support@moxa.
NPort Express Hardware Installation Guide for DE-211 The software described in this manual is furnished under a license ag reement and may be used only in acco rdance with the terms of that agreement. Copyright Notice Copyright © 2006 Moxa T echnologies Co.
MOXA Internet Services Customer satisfaction is our num ber one concern. T o ensure that customers receive the full benefi t of our product s, Moxa Inte rnet Services has been set up to pr ovi de technical support, dri ver updates, product information, and user’ s manual updat es.
Table of Contents 1 Introduction ................................................................................ 1-1 Features ....................................................................................... 1-2 Product S pecifications ........
1 1 1 Introduction Welcome to Moxa NPort Express, a co mpact palm-sized communications device that allows you to con trol RS-232/422/485 serial devices over a TCP/IP Ethernet.
1-2 Features ¾ 3-in-1 RS-232/422 /485 interface and 10 Mbps Ethernet ¾ Supports 4- and 2-wire RS-485 with patented ADDC™ and built-in terminator ¾ Supports industrial 12/24 VDC po wer input and o.
1-3 OS Supported Windows 95/98 /ME/NT/2000/XP Real COM driver, Linux real tty d river Protocols TCP, IP, UDP, Telnet, RTelnet, DHCP, BootP, ICMP Operation Modes Driver Mode, TCP Server, TCP Client, UD.
1-4 Package Checklist DE-211/11 0V 1 NPort Express DE- 211 Universal Serial Device Server DE-211/23 0V 1 NPort Express DE- 211 Universal Serial Device Server Both models include y Windows 95/98/ME/N T.
1-5 Front/Top/Rear/Bottom Panel Views 1. Female DB25 serial port 2. DIN Rail screw holes 3. Wall mount screw holes 4. RJ45 10BaseT Ethernet port 5. Reset button—press continuously for a. 3 sec to erase password After 3 sec, the ready LED will flash on/off every half second.
.
2 2 2 Overview This chapter includ es: ¾ LED Indicators ¾ Housing • DIN Rail • Wall Mount LED Indicators NPort Expres s’s top panel co ntains five LED indicators, as d escribed in the following table. LED Name LED Colo r LED Function r ed Power is on.
2-2 Housing DIN Rail For many industrial applications, you will find it convenient to use the DIN Rail attachments, as shown below. STEP 1: Use 2 screws per ear to att ach DIN Rail mounts to each of NPort Express’s two ears. ⇒ STEP 2: Insert the top o f the DIN Rail into slot A of the DIN Rail mount.
2-3 Wall Mount For many industrial applications, you will find it convenient to mount NPort Express on the wall, using two screws, as indi cated below. STEP 1: Scre w two screws, se parated by 7.8 cm, into the wall. Th e heads of the screws should be no greater than 6.
.
3 3 3 Serial Installation We discuss the following topics: ¾ DIP Switch Settings ¾ DB25 Female Connector Pinout ¾ RS-232 Wiring ¾ RS-422 Wiring ¾ 4-Wire RS- 485 Wiring • Using a DB25 connector .
3-2 Switch SW1 controls the fun ction of the se rial port ( ON , or up, for RS-232 Console conn ection, and do wn for Data Communication , such as when NPo rt Express is connected to your serial device) . Note that after changing the setting of SW1 , NPort Express will reboot to initiali ze th e new setting.
3-3 RS-232 Wiring * NP21101 is an optional accesso ry for DE-211 * NP21102 is an optional accesso ry for DE-211.
3-4 NOTE: The following pi n out di a gr am shows how to use a DB 25 (M) to DB25 (F) cable. NOTE: In Et hernet Modem Mode , you need a special cable—shown in the following pinout diag ram—to simul ate a DCD si gnal.
3-5 RS-422 Wiring Using a DB25 Connector Using the Optional Terminal Block NOTE: Us e a flathead scr ewdriver to tighten the two attachment scr ews that connect the terminal b lock to NPort Exp r ess.
3-6 RS-485 Wiring Using a DB25 Connector.
3-7 Using the Optional Terminal Block 4-wire RS-485 Termi nal Block Wiring NOTE: Use a flathead scr ewdri ver to tighten t he two attachment scr ews that connect the terminal b lock to NPort Exp r ess.
3-8 NOTE: When setting up a multidrop netwo rk, a daisy-chain ed network shou ld be used. Con struct your devic e-to-device wiri ng as indicate d in the above figure.
3-9 Enabling the Built-In 120 Ω Terminator To enable NPort Express’s built-in 120 Ω terminatio n resistor, you must short the bottom two pin s of jumper 6 (JP6), on DE- 211’s circuit board. T o do this: 1. Use a screw driver to remove DE-211’s outer protective cas e, and then locate JP6, as shown in the f igures below.
3-10 Enabling a User-Supplied Terminator When using the terminal block, you may install you r own external terminator resistor by connecting th e ends of the resistor directly to inpu ts 2 and 3, or by connecting the two ends of the resistor to th e wires that emanate from inputs 2 and 3, as shown in the following diagr ams.
4 4 4 Ethernet Installation We discuss the following topics: ¾ Connecting to the Ethernet Port • Connecting to a Hub or Switch • Connecting to a PC Connecting to the Ethernet Port Connecting to a.
4-2 Connecting to a PC In some cases, such as when configur ing drivers and software, you will find it convenient to hook NPo rt Express directly to your co mputer’s Ethernet card.
5 5 5 Power Connection We discuss the following topics: ¾ Using the Po wer Adapter ¾ Using Power Over Serial ¾ Power Status Check Using the Power Adapter Take the following steps to co nnect NPort Express ’s power adapter. 1. Plug the power adapter’ s DC plug into NPort Express’s DC-IN jack .
5-2 Using Power Over Serial Take the followi ng steps to set up NPort Express’s Power over Serial option. IMPORTANT NOTICE You may not use the power ad apter and Powe r Over Serial option at the sam e time. Using both p ower options at t he same time coul d cause irreparabl e damage to your NPort Expres s unit.
5-3 T o use the 5 VDC Power over Serial option, enable jum pers JP2 and JP3, as illustrated in the following diagram. Note that when using the 5 VDC option, power is supplied via pins 9 and 10: Power Status Check Use the PWR LED indicator on NPort E xpre ss’s top panel to see if it is receiving power.
.
A A A Declaration of Conformity Manufacturer’ s Name: Moxa Tech nologies Co., Lt d. Manufacturer’ s Address: Fl.4, No.135 , Lane 235, Pao-C hiao Rd.
.
B B B Problem Report Form NPort Express Customer name: Company: Te l : F a x : Email: Date: 1. Moxa Pr oduct: DE-2 1 1 (1 RS-23 2/422/485 port ) 2.
.
C C C Return Procedure For product repair , exchan ge, or refund, the customer must: ♦ Provide e vidence of original purchase. ♦ Obtain a Product Return Agreement (PRA) from the sales representative or dealer . ♦ Fill out the Problem Report Fo rm (PRF).
Ein wichtiger Punkt beim Kauf des Geräts Moxa Technologies DE-211 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Moxa Technologies DE-211 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Moxa Technologies DE-211 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Moxa Technologies DE-211 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Moxa Technologies DE-211 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Moxa Technologies DE-211 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Moxa Technologies DE-211 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Moxa Technologies DE-211. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Moxa Technologies DE-211 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
