Benutzeranleitung / Produktwartung XD450U des Produzenten Mitsubishi Electronics
Zur Seite of 34
EN - 1 ENGLISH XD450 XD400 DA T A PROJECTOR MODEL XD450U XD400U User Manual This User Manual is important to you. Please read it befor e using your projector .
EN - 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE P ARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EN - 3 ENGLISH Contents T rademark, Registered trademark Macintosh is register ed trademark of Apple Computer Inc. DLP™, Digital Micromirr or Device and DMD are all trademarks of T exas Instruments. Other brand or product names ar e trademarks or register ed trademarks of their respective holders.
EN - 4 Important safeguar ds Please read all these instructions r egarding your pr ojec- tor and retain them for futur e refer ence. Follow all warn- ings and instructions marked on the projector . 1. Read instructions All the safety and operating instructions should be read befor e the appliance is operated.
EN - 5 ENGLISH WARNING: Unplug immediately if ther e is something wrong with your projector . Do not operate if smoke, strange noise or odor comes out of your projector . It may cause fire or electric shock. In this case, unplug immediately and contact your dealer .
EN - 6 Overview 1 2 3 4 5 6 9 8 7 7 10 11 12 13 14 1 FOCUS ring 2 ZOOM ring 3 Contr ol panel 4 Air outlet grille 5 Remote contr ol sensor (Front) 6 Air inlet grille 7 Air outlet grille 8 T erminal boa.
EN - 7 ENGLISH Bottom side 3 2 1 COMPUTER VIDEO KEYSTONE EXPAND VOLUME LASER P in P AUTO POSITION MENU R-CLICK ENTER MUTE STILL 16 : 9 SELECT DVD VIDEO 1 2 1 2 MEMORY 1 2 3 4 5 6 7 8 9 10 11 12 23 22 .
EN - 8 Remote contr ol Battery installation Use two AA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the dir ection of the ar - row . 2. Load the batteries making sure that they are positioned corr ectly (+ to +, and - to -).
EN - 9 ENGLISH 40 102 32 81 24 61 51 1.3 62 1.6 2.8 7.2 60 152 48 122 36 91 77 2.0 94 2.4 4.3 10.9 80 203 64 163 48 122 103 2.6 125 3.2 5.7 14.5 100 254 80 203 60 152 130 3.3 157 4.0 7.1 18.1 150 381 120 305 90 229 196 5.0 237 6.0 10.7 27.1 200 508 160 406 120 305 262 6.
EN - 10 S-VIDEO IN VIDEO IN AUDIO IN (1/2) VCR, etc. to video output to audio output to S-video output Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player , and personal computer that have analog RGB output connectors.
EN - 11 ENGLISH Projector + video equipment having a DVI-D terminal (For XD450U only) Y ou can project high-quality images by connecting the DVI terminal of this projector to video equipment having a DVI-D output terminal.
EN - 12 Projector + Computer For computer with Mini D-SUB • The signal inputted to the COMPUTER/COMPONENT VIDEO DVI-D (HDCP) IN-2 terminal is not outputted from the COMPUTER OUT terminal. • Make sure to connect computer with DVI cable befor e starting computer .
EN - 13 ENGLISH Pr eparation 1. Tilt up the project to the appropriate angle. 2. Press the foot adjustment but tons next to the adjust- ment feet (rear), and the adjustment feet will come out. 3. Release the buttons to lock the adjustment feet (rear) to that position.
EN - 14 Basic operation • Images may not be projected with good quality in an extremely hot or cold envir onment. (This is not a product malfunction.) 4. Adjust the focus by tur ning the focus ring. 5. Choose your desired external input source using the COMPUTER or VIDEO button.
EN - 15 ENGLISH VOLUME 10 V olume from the speaker Press the VOLUME + or - button to change the volume from the speaker . The volume control bar will appear on the scr een. • The volume control bar will disappear about 10 sec- onds after the VOLUME button is released.
EN - 16 Menu operation CONTRAST IMAGE 0 BRIGHTNESS 0 ST ANDARD 0 COLOR AUTO 0 X G A 6 0 CineRichColor 5 COMPUTER OFF TINT 0 SHARPNESS COLOR TEMP . GAMMA MODE COLOR MA TRIX sRGB opt.
EN - 17 ENGLISH INST ALLA TION opt. ON BACK COLOR AUTO POWER ON AUTO POWER OFF SPLASH SCREEN MUTE MODE LAMP MODE ON BLUE BLACK OFF IMAGE CAPTURE SETUP OFF ST ANDARD OFF IMAGE REVERSE X G A 6 0 CONTRAST IMAGE 0 BRIGHTNESS 0 ST ANDARD 0 COLOR AUTO 0 X G A 6 0 CineRichColor AUTO COMPUTER OFF TINT 0 SHARPNESS COLOR TEMP .
EN - 18 3 FEA TURE MENU POSITION .... Use to select the position of the menu on the screen, 1. (upper left) or 2. (lower right). EXP AND MODE .... Choose the mode for enlarging the image. See page 21. CINEMA MODE .... When AUTO is selected, the film mode will be automatically activated when a film source signal is inputted.
EN - 19 ENGLISH Image adjustment CONTRAST R COLOR TEMP .-USER 0 CONTRAST B 0 BRIGHTNESS R 0 BRIGHTNESS B 0 CONTRAST IMAGE 0 BRIGHTNESS 0 ST ANDARD 0 COLOR AUTO 0 X G A 6 0 CineRichColor AUTO COMPUTER OFF TINT 0 SHARPNESS COLOR TEMP . GAMMA MODE COLOR MA TRIX sRGB opt.
EN - 20 Adjustment of the image from the computer This projector adjusts the format of the video signal supplied from the computer . However , sometimes im- ages are not pr ojected correctly owing to the type of the computer used. When the image from the computer isn ' t projected corr ectly , press the AUTO POSITION button.
EN - 21 ENGLISH Advanced featur es Expand By pressing the EXP AND button on the remote contr ol, you can magnify the image to view the details. Y ou can view the image in its original size in the REAL mode. • The EXP AND mode doesn't work with video or S-video signal.
EN - 22 Advanced featur es (Continued) XD450U XD450U CAPTURE : ENTER X2 CANCEL : MENU CAPTURE : ENTER + ENTER CANCEL : MENU XD450U XD450U CAPTURE : ENTER X2 CANCEL : MEN U Setting of the image displayed during startup or muting Y ou can display your desired image as the startup screen (or splash scr een).
EN - 23 ENGLISH Installation other device's remote commands Y ou can install other device's remote commands in the remote contr ol of this projector . How to install 1. Set the SELECT switch of the remote control of this projector to DVD or VIDEO, depending on the device you use.
EN - 24 Advanced featur es (Continued) Mouse remote contr ol By connecting to personal computer through the USB port, you can operate your computer with the pr ojector remote control. Projector + computer with USB connector Operation • Y ou can use the mouse remote control function with a computer supporting USB only .
EN - 25 ENGLISH FEA TURE P ASSWORD FUNCTION X G A 6 0 opt. LOCK UNLOCK OK OK P ASSWORD CONFIRM O K CANCEL FEA TURE P ASSWORD FUNCTION X G A 6 0 opt. LOCK UNLOCK OK OK P ASSWORD O K CANCEL Password fun.
EN - 26 Lamp r eplacement 9. Tighten up the screw (a) using a Phillips screwdriver (+) to secur e the lamp cover . Reset of the lamp operation time Plug in the power cord, turn on the lamp, and reset the lamp operation time by keep pressing the , , and POWER buttons on the control panel at the same time about thr ee sec- onds.
EN - 27 ENGLISH T roubleshooting The following offers solutions to some of the common pr oblems you may encounter . W e suggest that you consult this chart before contacting your dealer . Images aren't pr ojected on the screen. Problem Power isn't turned on.
EN - 28 T roubleshooting (continued) Images aren't pr ojected correctly . Problem Projected images ar e shaking. Projected images ar e dis- placed. Projected images ar e dis- torted. Projected images ar e dark. Projected images ar e blurred. White dots are seen on projected images.
EN - 29 ENGLISH Others Cause and solution • This air comes out as a result of cooling the inside of the pr ojector . This isn't a product malfunc - tion. • Check that the volume isn't set to low . • The microcomputers inside the pr ojector may be wrongly operating because of noise.
EN - 30 Indicators POWER ST A TUS POWER Steady re d Steady green Steady green ST A TUS Off Blinking green Steady green CONDITION Stand-by Lamp stand-by (about 1 minute) The power is on. (Normal condition) NOTE The POWER button cannot be used to switch between on and of f.
EN - 31 ENGLISH Specifications T ype Model Rated power supply Rated input Display T echnology Colors Projection lens Light source lamp Picture size PC compatibility Video compatibility Speaker S-vide.
EN - 32 Specifications (continued) Connectors 1 R(RED)/C R 2 G(GREEN)/Y 3 B(BLUE)/C B 4 GND 5 GND 6 GND 7 GND 8 GND 9 DDC5V 10 GND 11 GND 12 DDC Data 13 HD/CS 14 VD 15 DDC Clock 1 TXD IN 2 - - 3 - - 4 GND - 5 5V IN 6 CLOCK OUT 7 RXD OUT 8 DA T A OUT 1 3 5 2 6 8 1 5 11 6 10 15 61 245 310 100 5 SERIAL (8-pin) pin No.
EN - 33 ENGLISH TV60, 480i(525i) - 15.73 59.94 1024 x 768 - *1 TV50, 576i(625i) - 15.63 50.00 1024 x 768 - *1 1080i 60 (1125i 60) - 33.75 60.00 1024 x 576 - *1, *3 1080i 50 (1125i 50) - 28.13 50.00 1024 x 576 - *1 1080i 50a (1250i 50) - 31.25 50.00 1024 x 576 - *1 480p (525p) - 31.
North America MESCA (Mitsubishi Electric Sales Canada Inc.) http://www .mitsubishielectric.ca Information T echnologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, Canada Sales Phone :+1-(905) 475-7728 Fax :+1-(905) 475-7958 E-mail :pr ojectors@mitsubishielectric.
Ein wichtiger Punkt beim Kauf des Geräts Mitsubishi Electronics XD450U (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mitsubishi Electronics XD450U noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mitsubishi Electronics XD450U - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mitsubishi Electronics XD450U reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mitsubishi Electronics XD450U erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mitsubishi Electronics XD450U besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mitsubishi Electronics XD450U verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mitsubishi Electronics XD450U. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mitsubishi Electronics XD450U gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
