Benutzeranleitung / Produktwartung S490 des Produzenten Mitsubishi Electronics
Zur Seite of 36
EN – 1 ENGLISH LCD Projector User Manual FRANÇAIS DEUTSCH ITALIANO ESPAÑOL MODEL X500U / X490U / S490U X500 X490 S490.
EN – 2 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “ dangerous voltage ” within the product ’ s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
EN – 3 ENGLISH Contents Important safeguards ........................................................................... 4 Overview ............................................................................................... 6 Using the remote control .
EN – 4 Important safeguards Please read all these instructions regarding your LCD projector and retain them for future reference. Follow all warnings and instructions marked on the LCD pro- jector. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated.
EN – 5 ENGLISH WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer.
EN – 6 Overview LAMP VOLUME ZOOM/ FOCUS KEYSTONE TEMP VIDEO COMPUTER MUTE AUTO POSITION MENU ENTER 12 10 11 9 8 7 6 1 2 3 4 5 15 14 13 5 97 6 8 1 2 34 10 11 12 REMOTE AUDIO 2 IN COMPUTER 2 IN AUDIO .
EN – 7 ENGLISH Bottom side 1 2 3 1 Adjustment foot (Left/Right) 2 Air inlet cover 3 Lamp cover Caution: Do not replace the lamp right after using the projector .
EN – 8 Battery installation Use two AA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -).
´ EN – 9 ENGLISH Installation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector . Front projection T o find the approximate distance between the projector and screen: Multiply the width of the screen x 1.
EN – 10 Basic connections This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal com- puters having analog RGB output. Important: • Make sure that your equipment is turned off before connection. • Plug in firmly and unplug by holding the plug, not by pulling the main power cable.
´ EN – 11 ENGLISH For computer with Mini D-SUB 15P terminal (IBM PC or IBM PC compatibles etc.) REMOTE AUDIO 2 IN COMPUTER 2 IN AUDIO OUT COMPUTER OUT AUDIO 1 IN COMPUTER 1 IN DIGITAL ANALOG INPUT .
EN – 12 Adjustment foot screen Preparing the projector for operation Getting ready for projection 1. Connect the power cord provided to the projector . 2. Connect the power cord to the wall power outlet. 3. Remove the lens cap. W arning: • Do not look directly into the lens when projector is “ ON ” .
´ EN – 13 ENGLISH T o operate projector power ON • The picture might not be of optimum performance in extreme hot or cold conditions. (The projector is not malfunctioning.) 4. Press the ZOOM/FOCUS button to FOCUS. “ FO- CUS ” will appear on the display .
EN – 14 A UDIO 15 T o operate projector power ON (Continue) Turning off the projector 9. Press the POWER button. The message “ POWER OFF? YES : PRESS AGAIN ” appears on the screen. • T o exit from this mode, press any button except the POWER button.
EN – 15 ENGLISH Basic operation Several settings can be adjusted using Menu. EXAMPLE: Auto power off time setting 1. Press the MENU button. 2. Press the $ or % button to select the INST ALLA- TION menu. 3. Press the ENTER button (or } button). 4. Press the { or } button to select AUTO POWER OFF .
EN – 16 IMAGE REVERSE OFF AUTO POWER ON OFF AUTO POWER OFF IRIS OFF ON INSTALLATION ON STANDARD BACK COLOR OFF BLUE XGA60 LAMP MODE SPLASH SCREEN opt. XGA60 MENU POSITION VIDEO SIGNAL AUTO LANGUAGE English RESET ALL OK ANAMORPHIC OFF A Ë ? EXPAND MODE 1.
EN – 17 ENGLISH ANAMORPHIC .... Select ON when playing DVD discs containing data of letterboxed images. LANGUAGE ........ Use to select the language used in the menus. ( / English / Espa ñ ol / Deutsch / Fran ç ais / Italiano / ) RESET ALL .......
EN – 18 Adjusting the image Y ou can adjust the picture by using the IMAGE menu. T o control the level of white-to-black in the image : Adjust CONTRAST in IMAGE menu. Press the % button to increase the contrast and the $ button to reduce it. T o control the light level of the image : Adjust BRIGHTNESS in IMAGE menu.
EN – 19 ENGLISH Adjustment from personal computer Although this projector sets proper signal systems automatically for the image signal from personal computers, it cannot be applied to some of personal computers. In this case, press the AUTO POSITION button.
EN – 20 Advanced features for presentation Expand By pressing the EXP AND button on the remote con- trol, you can magnify the detailed image of the picture. Y ou can also view the screen displaying the picture as its original size (native resolution display).
EN – 21 ENGLISH Mouse remote control By connecting to personal computer through the USB or PS/2 port, you can operate your computer with the projector remote control. Projector + computer with USB connector Operation • T urn off computer and the projector before connecting with PS/2 port.
EN – 22 What you can do with HUB This projector is equipped with a relaying HUB. Y ou can do: – Easy Data (File) Exchange – Projection of the data in the compters connected via the HUB – Connection with an existing LAN – Print out through a Network printer Example of Network System 1) Connect laptop computers directly to the internal HUB.
EN – 23 ENGLISH The lamp is designed to project the image on the LCD panels. When the lamp no longer functions, replace it with a new one. Caution: • Do not remove the lamp immediately after using the projector , you may get burned because of the high temperature of the lamp.
EN – 24 Maintenance Caution: Be sure to turn off the projector and unplug the power cord from the wall outlet before you perform any main- tenance on the projector .
EN – 25 ENGLISH T roubleshooting The following offers solutions to some of the common problems you may encounter . W e suggest that you consult this chart before contacting your dealer . CAUSE • The air inlet slots, outlet slots or air filter is clogged with dust or some objects.
EN – 26 Indicators The projector has three indicators each of which shows the working condition of the projector . The following offers solutions to possible problems.
EN – 27 ENGLISH Specifications LCD projector X500U | X490U | S490U AC100 - 240V , 50 / 60Hz 4.3 A X500U|X490U S490U 1.3-inch LCD panel: 3 pieces (for R, G, B) 1.3-inch LCD panel: 3 pieces (for R, G, B) Pixels 1,024 × 768 = 786,432 pixels Pixels 800 × 600 = 480,000 pixels T otal 2,359,296 pixels T otal 1,440,000 pixels Active pixel rate: 99.
EN – 28 Specifications (continued) 2 LAN cable 246C417-10 1 Remote control 939P878-10 1 Remote control cable 246C424-10 1 User manual 871D340-30 1 Quick reference card 857D033-10 1 Reference manual for HUB 871D350-10 2 Battery for remote – Connectors Dimensional drawings (mm) 305 258 23 57 337 101.
EN – 29 ENGLISH Specification of RGB signals in each computer mode of the projector ( For X500U / X490U ) • When the EXP AND MODE of FEA TURE menu is set to real screen display , by pressing the EXP AND button on the remote control, it will switch to the screen displaying the picture as its original size (real screen display).
EN – 30 Specification of RGB signals in each computer mode of the projector ( For S490U ) • When the EXP AND MODE of FEA TURE menu is set to real screen display , by pressing the EXP AND button on the remote control, it will switch to the screen displaying the picture as its original size (real screen display).
Printed in Japan 871D340B30 Manufactured by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-City , Kyoto Japan.
1 Control projector by using a personal computer 1) Interface This projector can be controlled by connecting a personal computer with RS-232C terminal.
2 3) Control sequence (1) Send the command from a personal computer to the projector . (The commands must be sent at least 400ms apart.) (2) The projector will send a return command 400ms* after it has received an end code. If the command is not received correctly , the projector will not send the return command.
3 Sending commands Status code from Meaning from the PC etc. projector 30 30 72 35 34 0D Command as same as MENU button '0' '0' 'r' '5' '4' ' &ap.
4 9) Menu setting commands The menu setting commands execute the menu setting of this projector. If the personal computer doesn ’ t send the commands without attaching the data code, the projector which has received the command replays the setting data as data code.
5 How to set the grade Use ASCII letters code to set the grade for setting data. Please refer to the table below for HEX code. ASCII '+' ' Å |' '0' '1' '2.
Ein wichtiger Punkt beim Kauf des Geräts Mitsubishi Electronics S490 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mitsubishi Electronics S490 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mitsubishi Electronics S490 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mitsubishi Electronics S490 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mitsubishi Electronics S490 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mitsubishi Electronics S490 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mitsubishi Electronics S490 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mitsubishi Electronics S490. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mitsubishi Electronics S490 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
