Benutzeranleitung / Produktwartung NFJ9905SKHUW des Produzenten Mitsubishi Electronics
Zur Seite of 40
MITSUBISHI AUTO-SCANNING WITH DIGIT AL CONTROL COLOR DISPLA Y MONITOR MODEL NFJ9905SKHUW USER’S GUIDE For future reference, record the serial number of your display monitor in the space below: SERIAL No. The serial number is located on the rear cover of the monitor .
- 1-1 - ENGLISH CAUTION The power cord provided with this monitor is designed for safety and must be used with a properly grounded outlet to avoid possible electrical shock. Do not remove the monitor cabinet as this can expose you to very high voltages and other hazards.
- 1-2 - ENGLISH RADIO INTERFERENCE REGULATIONS STATEMENT FOR U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- 1-3 - ENGLISH Congraturations! You have just purchased a TCO ‘95 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and to the further development of environmentally- adapted electronic products.
- 1-4 - ENGLISH In and after the middle of this page, you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development Unit S-114 94 Stockholm Sweden Fax: +46 8 782 92 07 E-mail (Internet): development @tco.
- 1-5 - ENGLISH User’s Guide CONTENTS 1. INTRODUCTION .................................................................................................. 6 1.1 Features .................................................................................
- 1-6 - ENGLISH 1 1 INTRODUCTION Congratulations on your purchase of the high resolution color monitor. We designed this monitor to provide you with years of reliable trouble-free operation. This guide tells you how to connect, adjust and care for your monitor.
- 1-7 - ENGLISH 1.2 Internal Preset Memory Capability To minimize adjustment needs, the factory has preset popular display standards into the monitor, as shown in Table 1. If any of these display standards are detected, the picture size and position are automatically adjusted.
- 1-8 - ENGLISH 1.4 DDC The monitor includes the DDC TM 1 and DDC TM 2B feature. DDC (Display Data Channel) is a commu- nication channel over which the monitor automatically informs the host system about its capabilities (e.g. each supported resolution with its corresponding timing).
- 1-9 - ENGLISH 1.7 Unpacking After you unpack the box you should have all of the items indicated in Figure 1. Save the box and packing materials in case you ship or transport the monitor. Complete and mail in warranty cards. Figure 1. Figure 2. 5 15 90 90 1.
- 1-10 - ENGLISH Connect the color monitor and computer with the necessary cords and cables. 1.9 Quick Operation Chart To summarize the steps in connecting your computer with the color monitor and setting the necessary controls and switches, refer to the chart below.
- 1-11 - ENGLISH ENTER BNC / D-SUB SCROLL 2 2 P ART NAME 2.1 Control Names See Figures 3 and 4 for the location of the user controls, indicator and connectors. Each part is identified by number and is described individually. 1. POWER SWITCH 2. POWER-ON INDICATOR 3.
- 1-12 - ENGLISH R G B HD VD D-SUB COMP. BNC R G B HD VD D-SUB COMP. BNC A B 1 2 SIGNAL INPUT CONNECTOR (BNC) 8. UPSTREAM PORT: To connect to USB equipped computer(s). 9. DOWNSTREAM PORT: To connect to USB equipped peripherals, e.g, USB camera, keyboard, printer, etc.
- 1-13 - ENGLISH On the back of the monitor four kinds of plug-in connections are provided: AC power connector for the AC input, DB9-15P connector and BNC connector for video signal input and USB ports for USB communication. 3.1 AC Power Connection One end of the AC power cord is connected into the AC power connector on the back of the monitor.
- 1-14 - ENGLISH 3.2.2 Connecting to An Apple Macintosh Computer Figure 6 shows the SC-B102 cable and AD-A205 Adapter to the video port in an Apple Macintosh. 1. Power off, both the monitor and the computer. 2. Set the DIP switches of Macintosh Adapter according to the setting chart.
- 1-15 - ENGLISH 3.2.4 BNC Connection (1) IN CASE OF A COMPOSITE SYNC ON GREEN VIDEO SIGNAL (SYNC ON GREEN): Connect the R, G and B video signals to the BNC receptacles on the back of the monitor.
- 1-16 - ENGLISH R G B HD VD D-SUB COMP . BNC A B 1 2 R G B HD VD D-SUB COMP. BNC The computer is required to have Windows 98 installed and USB functions. When connecting one computer, either Upstream port A or B is available. The Upstream port with that the computer is connected is detected automatically.
- 1-17 - ENGLISH R G B HD VD D-SUB COMP. BNC A B 1 2 1 2 CAUTION Use the included ferrite core with the USB cable which is connected to the USB connectors (Downstream) to reduce the possibility of causing interference to radio, television, and other electrical devices.
- 1-18 - ENGLISH Figure 8 3.4 Installation of USB Function 1. Power on the display monitor and computer. 2. Enumerate Mitsubishi USB HUB using the following procedure. During the enumeration of Mitsubishi USB Hub, con- nect the keyboard and mouse equipped with USB function, to the computer and not to the downstream ports on the display monitor.
- 1-19 - ENGLISH 3. Enumerate the Mitsubishi Monitor Function using the following procedure. (1) Insert Windows 98 CD-ROM into your computer. Then, Figure 11 will ap- pear. (2) Click “Next” on Figure 11 and Figure 12 will appear. (3 ) Click “Next” on Figure 12 and Figure 13 will appear.
- 1-20 - ENGLISH (4) Click “CD-ROM Drive(C)” and “(L)”, and click “Next”. Figure 14 will appear. (5) Click “Finish” on Figure 14 and Figure 15 will appear. Click “OK” on Figure 15 to complete Enumeration of Mitsubishi Moni- tor Function.
- 1-21 - ENGLISH 4. Install “USB Monitor Control Software” into computer using the following procedure. (1) Install “SETUP.EXE” after inserting the included floppy disk in computer. Close all Windows programs before running this Setup program.
- 1-22 - ENGLISH You can confirm that the Setup program is successfully installed, with the following method or . Confirm that “Mitsubishi USB Moni- tor Console Application” is listed in the property of “Application Add/ Remove” under “Control Panel”.
- 1-23 - ENGLISH The following should be observed in order to use the USB function reliably. • Make sure all connections are made firmly and correctly. • Make sure the operation of the devices connected to the downstream ports before changing USB Upstream ports.
- 1-24 - ENGLISH ENTER BNC / D-SUB SCROLL ENTER BNC / D-SUB SCROLL The monitor has an OSD(On Screen Display) func- tion. The following procedure shows how to adjust the screen with using the OSD function. (1) Turn on the monitor. (2) Press any button ( ) to display the OSD screen.
- 1-25 - ENGLISH ENTER BNC / D-SUB SCROLL ENTER BNC / D-SUB SCROLL (5) Fix the item icon by pressing the proceed button . marks are blinking when fixed. (6) Adjust by pressing or button. (7) To select another item, press button once again. The fixed condition will be cancelled.
- 1-26 - ENGLISH CONTRAST Adjusts to the desired contrast level. X X BRIGHT Adjusts to the black level of the screen X X COLOR TEMPERA TURE Adjusts the color temperature of the screen image. X X H-SIZE Adjusts the horizontal size of the image on the screen.
- 1-27 - ENGLISH To decrease the contrast. CONTRAST Group Icon Press the Minus Button: Press the Plus Button: Item Icon Item BRIGHT COLOR TEMPERATURE H-SIZE H-PHASE V-SIZE V-POSITION PCC-AMP PCC-PHASE PCC-CENTER TOP-PCC BOTTOM-PCC PIN-BALANCE KEY-BALANCE TOP-BALANCE ROTATION GEOMETRY RESET To increase the contrast.
- 1-28 - ENGLISH To move the red to the right and the blue to the left. H-STATIC Press the Minus Button: Press the Plus Button: V-STATIC MOIRE CANCEL LEVEL CLAMP PULSE POSITION VIDEO LEVEL To adjust the purity condition on the top-left corner.
- 1-29 - ENGLISH USB UP-STREAM Press the Minus Button: Press the Plus Button: USB PORT COMBINATION Group Icon Item Icon Item The USB functions of the computer connected to Upstream port ROOT-A become active. The USB functions of the computer connected to Upstream port ROOT-B become active.
- 1-30 - ENGLISH Degauss Button 4.3 USB Monitor Control You can do monitor screen adjustments from your computer through the USB function equipped to the monitor, with the following procedure. (1) Open “display” in “control panel” to get “display property”.
- 1-31 - ENGLISH USB Monitor Control Adjustement Items and Functions Brightness Contrast Size Position Top Corners Top Balance Bottom Corners Trapezoidal Parallelogram Pincushion Pinc u.Balance Convergence Tilt Adjusts to the desired contrast level. ADJUSTMENT ITEM HORIZONTAL SLIDE BAR VERTICAL SLIDE BAR Adjusts to the black level of the screen.
- 1-32 - ENGLISH 5 5 TROUBLESHOOTING PROBLEM ITEMS TO CHECK Before calling your Authorized Product Support, please check that the items below are properly connected or set. In case of using a non-standard signal, please check the pin assignments and the signal timing of your computer with the specification outlined in 6.
- 1-33 - ENGLISH [Universal serial bus controller] is not listed in [Device Manager]. [Mitsubishi USB HUB] (or [Generic USB HUB]) is not listed in [Device Manager]. On the OSD screen, the Upstream port to which the USB device you want to use is connected is not colored by blue.
- 1-34 - ENGLISH PROBLEM ITEMS TO CHECK LOCATION Black vertical lines are visible on the screen. Thin vertical black lines on one or both sides of the screen. This minor condition is caused by grille element overlap which can occur during shipping. We suggest slapping the cabinet sides with an open hand after the monitor is warm.
- 1-35 - ENGLISH 6 6 SPECIFICA TIONS Size 50cm/19"(46cm/18" Diagonal Viewable Image) Mask type Aperture grille Gun In-line Deflection angle 90° CRT Phosphors Red, Green, Blue EBU (medium short persistence) Aperture grille pitch 0.
- 1-36 - ENGLISH Pin No. Signal 1 RED 2 GREEN 3 BLUE 4 GROUND 5 DDC GROUND 6 RED GROUND 7 GREEN GROUND 8 BLUE GROUND 9N C 10 SYNC GROUND 11 GROUND 12 SDA 13 HORIZONTAL SYNC 14 VERTICAL SYNC(VCLK) 15 SCL 7 7 APPENDIX 7.1 Monitor Signal Input Connector (DB9-15P) (Female) DB9-15P MOUNTED ON THE REAR PANEL PIN ASSIGNMENTS Pin No.
- 1-37 - ENGLISH 7.3 Macintosh Adapter AD-A205 settings The AD-A205 Macintosh Adapter allows you to take an advantage of the built in video capabilities of your Macintosh computer with the monitor. (1) Set the dip switches of the adapter, before connect to the computer.
- 1-38 - ENGLISH 640 x480@60Hz 640 x480@67Hz 640 x480@67Hz 640 x480@72Hz 640 x480@75Hz 640 x480@85Hz 800 x600@60Hz 800 x600@72Hz 800 x600@75Hz 800 x600@85Hz 832 x624@75Hz 832 x624@75Hz 1024 x768@60Hz .
CP871C146C10 MITSUBISHI ELECTRIC CORPORA TION HEAD OFFICE: MITSUBISHI DENKI BLD, MARUNOUCHI, T OKYO 100-0005 TELEX J24532 CABLE MELCO T OKYO.
Ein wichtiger Punkt beim Kauf des Geräts Mitsubishi Electronics NFJ9905SKHUW (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mitsubishi Electronics NFJ9905SKHUW noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mitsubishi Electronics NFJ9905SKHUW - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mitsubishi Electronics NFJ9905SKHUW reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mitsubishi Electronics NFJ9905SKHUW erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mitsubishi Electronics NFJ9905SKHUW besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mitsubishi Electronics NFJ9905SKHUW verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mitsubishi Electronics NFJ9905SKHUW. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mitsubishi Electronics NFJ9905SKHUW gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
