Benutzeranleitung / Produktwartung FFT9905SKJHFW des Produzenten Mitsubishi Electronics
Zur Seite of 31
AUTO-SCANNING WITH DIGITAL CONTROL COLOR DISPLAY MONITOR For future reference, record the serial number of your display monitor in the space below: SERIAL No.
Trademark IBM, PC, PS/2, PS/V, Personal System/2 are registered trademarks of International Business Machines Corp. Apple Macintosh is a registered trademark of Apple Computer, Inc.
2 RADIO INTERFERENCE REGULATIONS STATEMENT FOR U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa- tion.
3 Congratulations! Y ou hav e just purchased a TCO'95 approv ed and labelled product! Y our choice has provided y ou with a product de veloped f or professional use . Y our purchase has also contributed to reducing the b urden on the environment and to the further development of environmentally-adapted electronic products .
4 In and after the middle of this page, y ou will find a brief summar y of the environmental requirements met by this product. The complete en vironmental cr iter ia document ma y be ordered from: TCO Dev elopment Unit S-114 94 Stockholm Sweden F ax: +46 8 782 92 07 E-mail (Internet): de velopment@tco .
5 Diamond Scan 90e User’s Guide CONTENTS 1. INTRODUCTION .................................................................................................. 6 1.1 Features ..............................................................................
6 1 1 INTR ODUCTION Congratulations on your purchase of the Diamond Scan 90e high resolution color monitor. Mitsubishi designed this monitor to provide you with years of reliable trouble-free operation.
7 1.2 Internal Preset Memory Capability To minimize adjustment needs, the factory has preset popular display standards into the monitor, as shown in Table 1. If any of these display standards are detected, the picture size and center- ing are automatically adjusted.
8 1.5 Location Considerations When setting up and using the monitor, keep the following in mind: * For optimum viewing, avoid placing the monitor against a bright background or where sunlight or other light sources may reflect on the display area of the monitor; place the monitor just below eye level.
9 1. Diamond Scan 90e Color Monitor 2. AC Power Cord 3. Signal Cable SC-B102 4. Macintosh Adapter AD-A205 5. User’s Guide 6. Warranty-Set 1 4 3 2 Figure 1. 1.8 Tilt/Swivel Base The monitor comes with a tilt/swivel base. This enables you to position the monitor to the best angle and tilt for maximum viewing comfort.
10 1.9 Quick Operation Chart To summarize the steps in connecting your computer and adapter with Diamond Scan 90e color monitor and setting the necessary controls and switches, refer to the chart below. Set the controls and switches. See 5. TROUBLESHOOTING If the problem persists.
11 2 2 CONNECTING THE MONIT OR On the back of the monitor are four plug-in connections: one for the AC power cord, DB9-15P connector, BNC connector for video and a DIN-8P connector for the optional USB-unit. 2.1 AC Power Connection One end of the AC power cord is connected into the AC power connector on the back of the monitor.
12 2.2.2 Connecting to An Apple Macintosh Centris, Quadra, and Apple Macintosh II Family Figure 4 shows the SC-B102 cable and AD-A205 Adapter to the video port in an Apple Macintosh. 1. Power off, both the monitor and the computer. 2. Set the DIP switches of Macintosh Adapter according to the setting chart.
13 (1) IN CASE OF A COMPOSITE SYNC ON GREEN VIDEO SIGNAL (SYNC ON GREEN): Connect the R, G and B video signals to the BNC receptacles on the back of the monitor. (2) IN CASE OF EXTERNAL COMPOSITE SYNC SIGNAL: Connect the R, G and B video signals and the Composite sync signal to BNC receptacles on rear panel, respectively.
14 3. INPUT CONNECTOR SELECT BUTTON 3 3 USER CONTR OLS 3.1 Control Names See Figure 6 and 7 for the location of the following user controls and indicators. Each control is identified by number and is described individually on page 14. 1. POWER SWITCH 2.
15 REAR AC POWER CONNECTOR 8. SERIAL INTERFACE CONNECTOR: The monitor has a DIN-8P connector for serial interface communication. This connector will be used for optional USB unit. For the information about connecting, please refer to the instruction which is included in each optional kit.
16 4 4 OSD(On Screen Displa y) FUNCTIONS (1) CONTRAST: Adjusts to the desired contrast level. (2) BRIGHTNESS: Adjusts to the black level of the screen.
17 4.1 Operation Press any select button and control indicators will be superimposed on the display screen called 1st layer. Refer to Figure 6 for the location of the monitor function ( ) controls. Press the select buttons to choose one of the following controls.
18 Press the Plus Adjust Button: Press the Minus Adjust Button: 2nd OSD layer Symbol of 1st OSD layer CONTRAST 1 To decrease the contrast. To increase the contrast. Press plus and minus buttons together, to restore to factory preset level. 2 BRIGHTNESS To decrease the brightness.
19 Press the Plus Adjust Button: Press the Minus Adjust Button: 2nd OSD layer Symbol of 1st OSD layer H-SIZE To narrow the width of the image on the screen. To expand the width of the image on the screen. H-PHASE To move the image to the left. V-SIZE V-POSITION 5 6 7 8 To move the image to the right.
20 10 Press the Plus Adjust Button: Press the Minus Adjust Button: 2nd OSD layer Symbol of 1st OSD layer KEYSTONE The decrease the width at the top of the screen image and to increase the width at the bottom. To move the top and bottom of the screen image to the right.
21 1 5 1 6 Press the Plus Adjust Button: Press the Minus Adjust Button: 2nd OSD layer Symbol of 1st OSD layer GEOMETRY RESET To select the constant power-on mode. To select the power-save mode. 1 7 POWER-SAVE 1 8 VIDEO-LEVEL To select 1.0V of video input.
22 Press the Plus Adjust Button: Press the Minus Adjust Button: 2nd OSD layer Symbol of 1st OSD layer USB PORT SELECT 2 0 USB S T A T US P L E A S E C H E CK MO N I T OR CO N NE C T I ON OR USB IS S US P E NDED This "USB PORT SELECT" is prepared for optional part "USB-unit KT-X406" installed only.
23 4.2 POWER SAVE When the monitor has no sync signal or incorrect connection and the signal frequency is out of range, the following CAUTION comes on the screen. Check input signal, signal cable connection and signal frequency. When POWER SAVE is OFF and there is no sync signal, the following screen is displayed.
24 5 5 TR OUBLESHOO TING Before calling your Authorized Product Support, please check that the items below are properly connected or set. In case of using a non-standard signal, please check the pin assignments and the signal timing of your computer with the specification outlined in SPECIFICATION 6 and APPENDIX 7.
25 Size 49.5cm/19" (46cm/18" Diagonal Viewable Image) Mask type Shadow Mask Gun In-line Deflection angle 100 ° CRT Phosphors Red, Green, Blue EBU (medium short persistence) Crystal pigment Dot pitch 0.
26 DDC ............. DISPLAY DATA CHANNEL SDA .............. SERIAL DATA SCL .............. SERIAL CLOCK NC ................ NO-CONNECTION 7.2 Serial Interface Input Connector (DIN-8P) For Serial Interface Function (Female) DIN-8P MOUNTED ON THE REAR PANEL 7 7 APPENDIX Pin No.
27 7.3 SC-B102 Signal Cable PIN ASSIGNMENT AND SIGNAL LEVEL Approx. 1.8m DB9-15P DB9-15P (Male) (Male) Wire : 5 coaxial SIGNAL LEVEL NC ...............
28 7.4 Macintosh Adapter AD-A205 settings The AD-A205 Macintosh Adapter allows you to take advantage of the built-in video capabilities of your Macintosh computer with the monitor. With it, you may select any available video mode via the DIP Switches.
29 # = Must have revision B of ROM on video board = Not working combination. Power Macintosh 6100,6100AV, 7100,7100AV, 8100,8100AV -with- DRAM Video Port (HDl-45) Power Macintosh 6100AV, 7100AV, 8100A.
CP871C144A90 MITSUBISHI ELECTRIC CORPORATION HEAD OFFICE: MITSUBISHI DENKI BLD, MARUNOUCHI, TOKYO 100-0005 TELEX J24532 CABLE MELCO TOKYO.
Ein wichtiger Punkt beim Kauf des Geräts Mitsubishi Electronics FFT9905SKJHFW (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mitsubishi Electronics FFT9905SKJHFW noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mitsubishi Electronics FFT9905SKJHFW - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mitsubishi Electronics FFT9905SKJHFW reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mitsubishi Electronics FFT9905SKJHFW erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mitsubishi Electronics FFT9905SKJHFW besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mitsubishi Electronics FFT9905SKJHFW verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mitsubishi Electronics FFT9905SKJHFW. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mitsubishi Electronics FFT9905SKJHFW gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
